Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UNIPROT:P30536 (PBS)
 9,886 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Recent observations on the neurotoxicity of beta-amyloid have been reviewed and possible roles of racemization of beta-amyloid are discussed. beta 1-40, beta 25-35 and D-Ser26 beta 25-35 (all HCl salt forms), but not commercially available beta 1-40 (TFA salt form), take the beta-structure within few hours in PBS, form fibrils, exert toxic effects on hippocampal cultured neurons and suppresses MTT reduction activity of non-neuronal HeLa cells without cytotoxicity. D-Ser26 beta 1-40 is soluble and non-toxic in vitro but is converted by brain proteinases to D-Ser26 beta 25-35, a potent toxic and proteinase-resistant fragment. The co-injection of beta 1-40, D-Ser26 beta 25-35 or D-Ser26 beta 1-40 with ibotenic acid, but not beta-amyloid alone or ibotenic acid alone, into rat brains produce drastic neuronal loss in the hippocampal CA1 area. The in vivo degeneration activity of beta-amyloids is well correlated with their having beta-structure and activity to suppress the MTT reduction activity. A specific antibody against D-Ser26 beta 25-35 strongly reacts with hippocampal degenerated-CA1 neurons in AD but not control brains. These results suggest that D-Ser26 beta 25-35 and related peptides possibly generated from insoluble beta 1-40 due to aging exert toxic effects on the hippocampal CA1 pyramidal neurons by enhancing the susceptibility to excitatory amino acids.
 ...
PMID:[Neurotoxicity of beta-amyloid]. 1087 93

The effect of increasing or decreasing the gastric pH of mice on the course of experimental infection with Trichinella spiralis was studied, by administration of 1% NaHCO3 in PBS (pH 9.0) or 1% HCl in PBS (pH 5.0) to mice half an hour prior to infection respectively. The results revealed that raising the gastric pH led to a significant increase in the adult worm count with all increase in their fecundity both in vivo and in vitro. On on the other hand, the more acidic gastric pH induced prior to infection led to its amelioration. This was obvious by the significant reduction in the adult worm count and their inability to give birth to newborn larvae. Several factors may be incriminated, among which are decreased larval infectivity and affection of the maturation of the reproductive organs, mainly the uterus and the testis. Changes in their morphology were observed by both light and transmission electron microscopic studies, which could account for the impairment in their functions, namely embryogenesis and spermatogenesis.
 ...
PMID:The effect of changes in the gastric pH value on experimental trichinosis. 1177 94

This study describes an effective method of in situ RT-PCR (RT-ISPCR) that was developed to localize gene expression in plant tissues. This RT-PCR technique was performed on sectioned tissues of female buds of the cucumber GY3 inbred line. The CUS1 gene, encoding the MADS-box type (agamus-like) protein, the expression pattern of which was described earlier, was used as a marker gene for optimisation of steps in the in situ RT-PCR inside the cells. For the identification of RT-PCR products inside the cells of the female buds, they were fixed in FAA solution, embedded in Paraplast Plus and cut into 7 microm thick sections which were dewaxed by immersion in HistoClear and dehydrated with ethanol. They were washed in water, then in 0.02M HCl, 2xSSC and PBS buffer. In the next step of tissue pretreatment, the sections were digested with 1% pectinase. As shown, the pectinase treatment proved to be a crucial step in the tissue preparation procedure to get successful RT-PCR products. After washing in PBS buffer, the sections were digested with protease K followed by incubation with RNase-free DNase I, and subsequently washed in 2xSSC, 1xSSC and 0.5xSSC and finally in DEPC-treated water. Then the sections were covered with 50 microl of the RT-PCR reaction mixture supplemented with 0.5 microM digoxigenin dUTP and sealed with a coverslip. After amplification in situ the PCR products were identified with anti-digoxigenin antibody (Roche Molecular Biochemicals), conjugated with alkaline phosphatase. The data obtained showed that specific signals reflecting CUS1 gene expression were detected in the female flower buds of cucumber. The specificity of the in situ RT-PCR protocol was confirmed by dot blot hybridization of RT-PCR products with CUS1 cDNA probe.
 ...
PMID:A useful protocol for in situ RT-PCR on plant tissues. 1194 46

Cell number is usually evaluated during in vitro studies to estimate metabolic or pharmacological effects of specific compounds. However, estimation of in vitro cell density by direct cell counting is a laborious and time-consuming task, whereas indirect methods for cell quantitation have serious disadvantages such as environmental costs or inaccuracies derived from non-specific interferences. We developed a new method for in vitro cell density quantitation which employs carmine, a natural dye widely used for chromosome staining in cytological studies. Normal or transformed murine fibroblasts, avian normal fibroblasts, human epithelial HeLa cells, and insect cells, inoculated at a range of cell densities, were fixed with 4% formaldehyde/PBS and stained with 0.4% alcoholic-HCl carmine. The stain retained in cell monolayers was extracted with 0.01 M NaOH and spectrophotometrically measured at 531 nm. Invariably, high correlation coefficients between cell number and absorbance were obtained for each cell type, within a range of 5 x 10(3) to 5 x 10(5) cells. Moreover, identical cell growth curves were obtained when cell number was estimated over several days of culture by both direct cell counting and carmine staining methods. Our results show that the carmine staining method represents an easy, precise and reliable alternative for in vitro cell quantitation, avoiding interferences caused by cell components modulable by culture treatments, and over a wide range of cell types and cell densities.
 ...
PMID:Colorimetric quantitation of in vitro cell density using carmine, a chromosome-specific stain. 1220 24

Spherical and well-dispersed alginate-chitosan microcapsules, with a mean diameter of 77.28+/-0.93 microm (n=3), were prepared by the emulsification-gelation method. Adriamycin hydrochloride (ADM) was used as a model drug to investigate the drug loading capacity and release characteristics of the microcapsules. The drug/carrier ratio and chitosan concentration influenced the encapsulation efficiency of adriamycin. The adriamycin release from microcapsules was obviously different in 0.1 mol/l HCl from that in phosphate-buffered saline (PBS, pH 7.4). The drug was completely and rapidly released in 0.1 mol/l HCl, while it showed a sustained release after a burst release in PBS. The increase in chitosan concentration had no effect on adriamycin release in PBS. Using sulforhodamin B (SRB)-staining survival assay, the inhibition of adriamycin alginate-chitosan microcapsules (ADM-ACM) to different cancer cell lines (human BGC-823 cells, Bel-7402 cells and Hela cells) in vitro was determined. The inhibitory rate of ADM-ACM suspension to the three cell lines significantly outran that of ADM solution, no matter at high or low concentration. The effects of blank alginate-chitosan microcapsules (BACM) on renal arterial embolization were examined with transcatheter arterial embolization in rabbits. The angiogram and histopathological results indicated the blank microcapsules had excellent short- and long-term effects on renal arterial embolization.
 ...
PMID:Studies on alginate-chitosan microcapsules and renal arterial embolization in rabbits. 1246 13

The photogeneration of nitric oxide (NO) using laser flash photolysis was investigated for S-nitroso-glutathione (GSNO) and S-nitroso-N-acetylcysteine (NacySNO) at pH 6.4 (PBS/HCl) and 7.4 (PBS). Irradiation of S-nitrosothiol with light (lambda = 355 nm followed by absorption spectroscopy) resulted in the homolytic decomposition of NacySNO and GSNO to generate radicals (GS and NacyS ) and NO. The release of NO from donor compounds measured with an ISO-Nometer apparatus was larger at pH 7.4 than pH 6.4. NacySNO was also incorporated into dipalmitoyl-phosphatidylcholine liposomes in the presence and absence of zinc phthalocyanine (ZnPC), a well-known photosensitizer useful for photodynamic therapy. Liposomes are usually used as carriers for hydrophobic compounds such as ZnPC. Inclusion of ZnPC resulted in a decrease in NO liberation in liposomal medium. However, there was a synergistic action of both photosensitizers and S-nitrosothiols resulting in the formation of other reactive species such as peroxynitrite, which is a potent oxidizing agent. These data show that NO release depends on pH and the medium, as well as on the laser energy applied to the system. Changes in the absorption spectrum were monitored as a function of light exposure.
 ...
PMID:Nitric oxide release from the S-nitrosothiol zinc phthalocyanine complex by flash photolysis. 1271 77

The aim of the present work was to compare the drug release rates from the native and acetylated starches. The average degree of acetyl substitution per glucose residue of potato starch was either 1.9 (SA DS 1.9) or 2.6 (SA DS 2.6). Bovine serum albumin (BSA) (mol. wt. 68,000), FITC-dextran (mol. wt. 4400), timolol (mol. wt. 332, log P=1.91) and sotalol-HCl (mol. wt. 308, log P=-0.62) were used as model drugs. All of the model drugs were released rapidly from the potato starch film in PBS pH 7.4 with and without alpha-amylase in the dissolution medium (t50% varied from 0.17 to 3.37 h). When compared to the potato starch film, all of the studied drugs were released at a substantially slower rate from the SA films in the corresponding mediums. The release of the smaller drugs (sotalol, timolol) from the SA films was faster than that of the macromolecules (FITC-dextran, BSA). Furthermore, sotalol was released faster than the more lipohilic timolol from the SA films. Release of macromolecules from the SA films was biphasic with and without alpha-amylase in the dissolution medium: an initial fast release phase was followed by a slower release phase (SA DS 1.9) or no release occurred after the initial phase (SA DS 2.6). All of the drugs were released faster from the SA DS 1.9 film than the weight loss of the film itself. When compared to the SA DS 1.9 film, the model drugs (except sotalol) were released slower from the SA DS 2.6 film. The macromolecule release from the SA DS 2.6 film was erosion-controlled. The weight loss of the SA DS 2.6 film was slow with and without alpha-amylase in the incubation medium. The present results show that acetylation of potato starch can substantially retard drug release. The drug release profiles may be controlled by the degree of substitution, since drug release from the SA DS 1.9 film was faster than the corresponding release from the SA DS 2.6 film.
 ...
PMID:Drug release from starch-acetate films. 1293 12

A new heterobifunctional linker containing an aldehyde-reactive aminooxy group and a thiol-reactive maleimide group, namely N-[4-(aminooxy)butyl]maleimide, was synthesized as a stable HCl salt by O-alkylation of either N-hydroxyphthalimide or N-(4-monomethoxytrityl)hydroxylamine, followed by N-alkylation of maleimide, in an overall yield of 18% (seven steps) or 29% (five steps), respectively. This heterobifunctional linker allowed a simple and efficient synthesis of a maleimide-containing thiol-reactive (18)F-labeling agent. Thus, N-[4-[(4-[(18)F]fluorobenzylidene)aminooxy]butyl]maleimide (specific activity: approximately 3000 Ci/mmol at end of synthesis) was synthesized in two steps involving the preparation of 4-[(18)F]fluorobenzaldehyde, followed by its aminooxy-aldehyde coupling reaction to the heterobifunctional linker, with an overall radiochemical yield of approximately 35% (decay corrected) within approximately 60 min from end of bombardment. Initial (18)F-labeling experiments were carried out using a thiol-containing tripeptide glutathione (GSH) and a 5'-thiol-functionalized oligodeoxynucleotide (5'-S-ODN) in phosphate-buffered saline (PBS, pH 7.5). After standing at room temperature for 10 min, the (18)F-labeled GSH and 5'-S-ODN were obtained in (18)F-labeling yields of approximately 70% and approximately 5% (decay-corrected), respectively. The heterobifunctional linker is easy to synthesize and provides a facile access to the maleimide-containing thiol-reactive (18)F-labeling agent, which could be advantageously employed in the development of (18)F-labeled biomomolecules for use with positron emission tomography.
 ...
PMID:Synthesis of a new heterobifunctional linker, N-[4-(aminooxy)butyl]maleimide, for facile access to a thiol-reactive 18F-labeling agent. 1462 42

To investigate the metal release of each base and alloying elements in vitro, SUS316L stainless steel, Co-Cr-Mo casting alloy, commercially pure Ti grade 2, and Ti-6Al-4V, V-free Ti-6Al-7Nb and Ti-15Zr-4Nb-4Ta alloys were immersed in various solutions, namely, alpha-medium, PBS(-), calf serum, 0.9% NaCl, artificial saliva, 1.2 mass% L-cysteine, 1 mass% lactic acid and 0.01 mass% HCl for 7d. The difference in the quantity of Co released from the Co-Cr-Mo casting alloy was relatively small in all the solutions. The quantities of Ti released into alpha-medium, PBS(-), calf serum, 0.9% NaCl and artificial saliva were much lower than those released into 1.2% L-cysteine, 1% lactic acid and 0.01% HCl. The quantity of Fe released from SUS316L stainless steel decreased linearly with increasing pH. On the other hand, the quantity of Ti released from Ti materials increased with decreasing pH, and it markedly attenuated at pHs of approximately 4 and higher. The quantity of Ni released from stainless steel gradually decreased with increasing pH. The quantities of Al released from the Ti-6Al-4V and Ti-6Al-7Nb alloys gradually decreased with increasing pH. A small V release was observed in calf serum, PBS(-), artificial saliva, 1% lactic acid, 1.2% l-cysteine and 0.01% HCl. The quantity of Ti released from the Ti-15Zr-4Nb-4Ta alloy was smaller than those released from the Ti-6Al-4V and Ti-6Al-7Nb alloys in all the solutions. In particular, it was approximately 30% or smaller in 1% lactic acid, 1.2% L-cysteine and 0.01% HCl. The quantity of (Zr + Nb + Ta) released was also considerably lower than that of (Al + Nb) or (Al + V) released. Therefore, the Ti-15Zr-4Nb-4Ta alloy with its low metal release in vitro is considered advantageous for long-term implants.
 ...
PMID:Comparison of metal release from various metallic biomaterials in vitro. 1519 77

Multilayer films consisting of polyethylenimine (PEI) and albumin were successfully prepared on biomedical 316L stainless steel surface via electrostatic self-assembly of the PEI and albumin. The process of electrostatic self-assembly of PEI/albumin was monitored by125I radiolabeling, electrochemical impedance spectroscopy (EIS) and atomic force microscopy (AFM). The EIS data revealed that the multilayer coating was stable in Tris-HCl (pH 7.35) buffer solution for 21 days. 125I radiolabeling experiments indicated that less than 10% albumin was eluted by PBS in 45 days. Static platelet adhesion experiments indicated that the PEI/albumin deposited on stainless steel could resist platelet adhesion effectively. Such an easy processing and shape-independent method may have good potential for surface modification of cardiovascular devices.
 ...
PMID:Fabrication of alternating polycation and albumin multilayer coating onto stainless steel by electrostatic layer-by-layer adsorption. 1526 Oct 73


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>