Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UNIPROT:P30536 (PBS)
 9,886 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Drug-containing microspheres based on synthetic polymers such as poly(methyl methacrylate) (PMMA) and PMMA derivatives are known for their medical applications, particularly for hard tissue repair and regeneration. In our earlier work, we have reported that the synthesis of PMMA and carboxyl group-containing PMMA functional (PMMA-F) microspheres and these microspheres were fully characterized by various techniques. In the present investigation, an attempt was made to prepare drug-containing PMMA (without carboxylic functional groups) and PMMA-F (with carboxylic functional groups) microspheres by solvent evaporation technique. The presence of characteristic groups in the drug-containing PMMA and PMMA-F microspheres was confirmed using 1H-FT-NMR spectroscopy. Equilibrium swelling experiments of both microspheres was carried out in pH 7.4 phosphate buffer and pH 1.2 gastric medium. PMMA-F microspheres were able to float in the pH 1.2 and 7.4 media, whereas PMMA microspheres settled in both. Optical and scanning electron micrographs indicated that the microspheres are spherical and porous in nature. The carboxylic groups of PMMA-F microspheres were coupled with amino groups of gentamicin using 1-ethyl-3(3-dimethylpropyl) carbodiamide as coupling agent, whereas in the case of PMMA microspheres, the gentamicin was incorporated in the porous site of the microspheres. The ibuprofen drug was incorporated in the porous site of PMMA and PMMA-F microspheres. The cumulative in vitro release profiles of gentamicin and ibuprofen from PMMA and PMMA-F microspheres were performed in PBS pH 7.4 at 37 degrees C. It shows that gentamicin containing PMMA-F microspheres releases the drug ones a longer period compared to PMMA microspheres.
 ...
PMID:In vitro release of ibuprofen and gentamicin from PMMA functional microspheres. 1202 44

Two kit preparations of the organometallic precursor [(188)Re(H(2)O)(3)(CO)(3)](+) in aqueous media are presented. Method A uses gaseous carbon monoxide and amine borane (BH(3).NH(3)) as the reducing agent. In method B CO(g) is replaced by K(2)[H(3)BCO(2)] that releases carbon monoxide during hydrolysis. Both procedures afford the desired precursor in yields >85% after 10 min at 60 degrees C. HPLC and TLC analyses revealed 7 +/- 3% of unreacted (188)ReO(4)(-) and <5% of colloidal (188)ReO(2). Solutions of up to 14 GBq/mL Re-188 have been successfully carbonylated with these two methods. The syntheses of two tailor-made bifunctional ligand systems for the precursor [(188)Re(H(2)O)(3)(CO)(3)](+) are presented. The tridentate chelates consist of a bis[imidazol-2-yl]methylamine or an iminodiacetic acid moiety, respectively. Both types of ligand systems have been prepared with alkyl spacers of different length and a pendent primary amino or carboxylic acid functionality, enabling the amidic linkage to biomolecules. The tridentate coordination of the ligands to the rhenium-tricarbonyl core could be elucidated on the macroscopic level by X-ray structure analyses and 1D and 2D NMR experiments of two representative model complexes. On the nca level, the ligands allow labeling yields >95% with [(188)Re(H(2)O)(3)(CO)(3)](+) under mild reaction conditions (PBS buffer, 60 degrees C, 60 min) at ligand concentrations between 5 x 10(-4) M and 5 x 10(-5) M. Thus, specific activities of 22-220 GBq pe micromol of ligand could be achieved. Incubation of the corresponding Re-188 complexes in human serum at 37 degrees C revealed stabilities between 80 +/- 4% and 45 +/- 10% at 24 h, respectively, and 63 +/- 3% and 34 +/- 3% at 48 h postincubation in human serum depending on the chelating system. Decomposition product was mainly (188)ReO(4)(-). The routine kit-preparation of the precursor [(188)Re(H(2)O)(3)(CO)(3)](+) in combination with tailor-made ligand systems enables the organometallic labeling of biomolecules with unprecedented high specific activities.
 ...
PMID:Steps toward high specific activity labeling of biomolecules for therapeutic application: preparation of precursor [(188)Re(H(2)O)(3)(CO)(3)](+) and synthesis of tailor-made bifunctional ligand systems. 1212 Nov 30

Molecular mobility and phase structure of biodegradable poly(butylene succinate) (PBS) and poly(butylene succinate-co-20 mol % butylene adipate) [P(BS-co-20 mol % BA)] have been investigated by high-resolution solid-state (13)C NMR. For both samples, two components with different (13)C spin-lattice relaxation time (T(1C)) values have been observed in the crystalline region. The crystalline component with shorter T(1C) value is assignable to the interface near amorphous phase. The crystalline component with longer T(1C) value is ascribed to the inside of the crystalline region. On the basis of T(1C), it has been concluded that the BA units are not included in the crystalline region of P(BS-co-20 mol % BA). Molecular mobility and higher-ordered structure of amorphous phase have been also compared between the melt and solid state. Variable-temperature high-resolution (13)C NMR measurements for the amorphous phase have revealed the remarkable difference in dynamics and structure between the melt and solid state.
 ...
PMID:Molecular mobility and phase structure of biodegradable poly(butylene succinate) and poly(butylene succinate-co-butylene adipate). 1221 58

Poly(D,L-lactic acid)-methoxypoly(ethylene glycol) (PLA-MePEG) copolymers were synthesized by ring-opening polymerization of D,L-lactide in the presence of MePEG of different molecular weights and stannous octoate as the catalyst. The chemical composition of the diblock-copolymer PLA-MePEG was confirmed by 1H-NMR and the molecular weight and distribution were assessed by gel permeation chromatography. Nanoparticles containing Nile red as a fluorescent dye were prepared using poly(D,L-lactic acid) (PLA), blends of PLA and PLA-MePEG or PLA-MePEG alone. Incubation of nanoparticles with human blood monocytes was performed in serum or in PBS and the cell-associated fluorescence was analyzed by flow cytometry. In serum, a protective effect was obtained and the interaction of particles with mononuclear leukocytes decreased to 40%.
 ...
PMID:Cell interaction studies of PLA-MePEG nanoparticles. 1261 12

Many biodegradable polymers have been developed for controlled drug delivery. The plethora of drug therapies and types of drugs demand different formulations, fabrications conditions and release kinetics. No one single polymer can satisfy all the requirements. To extend the properties of poly(D,L-lactide) (PLA), we synthesized copolymers of PLA and poly(ethylethylene phosphate) (PEEP) by ring-opening polymerization using Al(Oipr)3 as the initiator. The copolymers were structurally characterized by IR and 1H NMR. DSC data confirmed the formation of random microphase structure in all the copolymers, and showed a decrease of Tg from 43.2 to -22.6 degrees C when the molar content of ethylethylene phosphate (EEP) increased from 5 to 40%. The hydrophilicity of the copolymers increased with EEP content. In contrast to the degradation behavior of PLA, disc samples made of PLAEEP90 showed a linear weight loss profile in PBS (pH 7.4) at 37 degrees C. BSA microspheres using PLAEEP90 were prepared by double-emulsion method, yielding a loading level of 4.3% and a loading efficiency of 75%. The BSA release profile consisted of an initial burst (9%) on the first day, followed by a daily 4% release for the following 40 days, resulting in 91% of the BSA release in a near linear manner. The released BSA remained intact according to SDS-PAGE data. Cytotoxicity and histopathology studies showed low toxicity in HeLa cells and good tissue biocompatibility in mouse brain, respectively. PLAEEP is a promising biodegradable polymer for controlled drug delivery.
 ...
PMID:Poly(D,L-lactide-co-ethyl ethylene phosphate)s as new drug carriers. 1449 84

Temperature-sensitive diblock copolymers, poly(N-isopropylacrylamide)-b-poly(D,L-lactide) (PNIPAAm-b-PLA) with different PNIPAAm contents were synthesized and utilized to fabricate microspheres containing bovine serum albumin (BSA, as a model protein) by a water-in-oil-in-water double emulsion solvent evaporation process. XPS analysis showed that PNIPAAm was a dominant component of the microspheres surface. BSA was well entrapped within the microspheres, and more than 90% encapsulation efficiency was achieved. The in vitro degradation behavior of microspheres was investigated using SEM, NMR, FTIR, and GPC. It was found that the microspheres were erodible, and polymer degradation occurred in the PLA block. Degradation of PLA was completed after 5 months incubation in PBS (pH 7.4) at 37 degrees C. A PVA concentration of 0.2% (w/v) in the internal aqueous phase yielded the microspheres with an interconnected porous structure, resulting in fast matrix erosion and sustained BSA release. However, 0.05% PVA produced the microspheres with a multivesicular internal structure wrapped with a dense skin layer, resulting in lower erosion rate and a biphasic release pattern of BSA that was characterized with an initial burst followed by a nonrelease phase. The microspheres made from PNIPAAm-b-PLA with a higher portion of PNIPAAm provided faster BSA release. In addition, BSA release from the microspheres responded to the external temperature changes. BSA release was slower at 37 degrees C (above the LCST) than at a temperature below the LCST. The microspheres fabricated with PNIPAAm-b-PLA having a 1:5 molar ratio of PNIPAAm to PLA and 0.2% (w/v) PVA in the internal aqueous phase provided a sustained release of BSA over 3 weeks in PBS (pH 7.4) at 37 degrees C.
 ...
PMID:Preparation and characterization of temperature-sensitive poly(N-isopropylacrylamide)-b-poly(D,L-lactide) microspheres for protein delivery. 1460 9

This study presents chemical syntheses and physical characterization of a new aliphatic poly(L-lactide-b-butylene succinate-b-L-lactide) triblock copolyester with soft and hard biodegradable building blocks. First, poly(butylene succinate) (PBS) prepolymers terminated with hydroxyl functional groups were synthesized through melt polycondensation from succinic acid and 1,4-butanediol. Further, a series of new PLLA-b-PBS-b-PLLA triblock copolyesters bearing various average PLLA block lengths were prepared via ring opening polymerization of L-lactide with the synthesized hydroxyl capped PBS prepolymer (Mn = 4.9 KDa) and stannous octanoate as the macroinitiator and catalyst, respectively. By means of GPC, NMR, FTIR, DSC, TGA, and wide-angle X-ray diffractometer (WAXD), the macromolecular structures and physical properties were intensively studied for these synthesized PBS prepolymer and PLLA-b-PBS-b-PLLA triblock copolyesters. 13C NMR and GPC experimental results confirmed the formation of sequential block structures without any detectable transesterification under the present experimental conditions, and the molecular weights of triblock copolyesters could be readily regulated by adjusting the feeding molar ratio of L-lactide monomer to the PBS macroinitiator. DSC measurements showed all single glass transitions, and their glass transition temperatures were found to be between those of PLLA and PBS, depending on the lengths of PLLA blocks. It was noteworthy that the segmental flexibilities of the hard PLLA blocks were found to be remarkably enhanced by the more flexible PBS block partner, and the PBS and PLLA building blocks were well mixed in the amorphous regions. Results of TGA analyses indicated that thermal degradation and stabilities of the PLLA blocks strongly depended on the average PLLA block lengths of triblock copolyesters. In addition, FTIR and WAXD results showed the coexistence of the assembled PLLA and PBS crystal structures when the average PLLA block length became larger than 7.8. These results may be beneficial for this new biodegradable aliphatic triblock copolyester to be applied as a potential biomaterial.
 ...
PMID:Syntheses and physical characterization of new aliphatic triblock poly(L-lactide-b-butylene succinate-b-L-lactide)s bearing soft and hard biodegradable building blocks. 1460 15

This study presents chemical synthesis, structural, and physical characterization of novel biodegradable aliphatic poly(butylene succinate-co-cyclic carbonate)s P(BS-co-CC) bearing functional carbonate building blocks. First, five kinds of six-membered cyclic carbonate monomers, namely, trimethylene carbonate (TMC), 1-methyl-1,3-trimethylene carbonate (MTMC), 2,2-dimethyl-1,3-trimethylene carbonate (DMTMC), 5-benzyloxytrimethylene carbonate (BTMC), and 5-ethyl-5-benzyloxymethyl trimethylene carbonate (EBTMC), were well prepared from ethyl chloroformate and corresponding diols at 0 degrees C in THF solution with our modified synthetic strategies. Then, a series of new P(BS-co-CC)s were synthesized at 210 degrees C through a simple combination of poly-condensation and ring-opening-polymerization (ROP) of hydroxyl capped PBS macromers and the prepared carbonate monomers, and titanium tetra-isopropoxide Ti(i-OPr)4 was used as a more suitable catalyst of 5 candidate catalysts which could concurrently catalyze poly-condensation and ROP. By means of NMR, GPC, FTIR, and thermal analytical instruments, macromolecular structures and physical properties have been characterized for these aliphatic poly(ester carbonate)s. The experimental results indicated that novel biodegradable P(BS-co-CC)s were successfully synthesized with number average molecular weight Mn ranging from 24.3 to 99.6 KDa and various CC molar contents without any detectable decarboxylation and that the more bulky side group was attached to a cyclic carbonate monomer, the lower reactivity for its copolymerization would be observed. The occurrences of 13C NMR signal splitting of succinyl carbonyl attributed to the BS building blocks could be proposed due to the randomized sequences of BS and CC building blocks. FTIR characterization indicated two distinct absorption bands at 1716 and 1733 approximately 1735 cm(-1), respectively, stemming from carbonyl stretching modes for corresponding BS and CC units. With regard to their thermal properties, it is seen that the synthesized P(BS-co-CC)s exhibited thermal degradation temperatures 10 approximately 20 degrees C higher than that of PBS. On the basis of the synthesized P(BS-co-BTMC)s, new aliphatic poly(butylene succinate-co-5-hydroxy trimethylene carbonate)s were further synthesized, bearing hydrophilic hydroxyl pendant functional groups through an optimized Pd/C catalyzed hydrogenation. These semi-crystalline new biodegradable aliphatic copolymers with tunable physical properties and functional carbonate building blocks might be expected as potential new biomaterials.
 ...
PMID:Novel biodegradable aliphatic poly(butylene succinate-co-cyclic carbonate)s with functional carbonate building blocks. 1. Chemical synthesis and their structural and physical characterization. 1471 28

Degradable terpolymers were synthesized by bulk copolymerization of 2,2-dimethyl trimethyle necarbonate (DTC), epsilon-caprolactone (CL) and poly(ethylene glycol) (PEG) using stannous octoate as catalyst at 140 degrees C for 36 h. The molar ratio in feed of DTC to CL was fixed at 20:80. The molecular weight and the mol% of PEG were varied in order to obtain copolymers with different properties. The copolymers were characterized by 1H-NMR, 13C-NMR, FT-IR, GPC and DSC. It was found that the hydrophilicity of these materials increased with increasing PEG content in the copolymers, according to the measurements of static contact angles of distilled water on the surface of polymer films. Mechanical tests and hydrolytic degradation assays showed that copolymers of different degradability and mechanical properties could be tailored by adjusting the compositions. For the copolymer T-4 (11.9 mol% of PEG with Mn 2000), the tensile strength and the elastic modulus could reach 6.2 MPa and 25 MPa, respectively. It took only 4 weeks for the copolymer T-4 to degrade to 83% (M(n,t)/M(n,0)) and 10 weeks to 63% in 0.1 M PBS at pH 7.4 and 37 degrees C. There was no obvious acceleration of degradation rate in vivo in comparison with that in vitro. These materials might be useful for nerve regeneration guides and other biomedical applications.
 ...
PMID:Preparation, characterization and properties of poly(2,2-dimethyl trimethylene carbonate-co-epsilon-caprolactone)-block-poly(ethylene glycol). 1487 Sep 40

In order to obtain much slower biodegradable films, which are often required for biomedical applications, we have developed a series of studies on heterogeneous cross-linking of hyaluronic acid (HA) films by using 2-chloro-1-methylpyridinium iodide (CMPI) or 1-ethyl-(3,3-dimethylaminopropyl)carbodiimide (EDC) as cross-linking reagents. From the in vitro degradation rate, we found that EDC cross-linked HA films completely dissolved in PBS at 37 degrees C during the period of 4-6 days. However, CMPI cross-linked HA films showed only a low percentage of weight loss over 30 days. This phenomenon could be explained from the mechanism of reaction between carboxyl group of HA and EDC. The latter reacted with carboxyl group to form an unstable intermediate O-acylurea, which showed a relatively low reactivity and quickly rearranged to form a stable N-acylurea. Thus, most of the EDC-activated carboxyl groups in HA were chemically transferred into N-acylurea or left as unreactive O-acylurea, and only a few of cross-linking bonds were formed between HA. On the other hand, the intermediate obtained from the reaction between carboxyl group and CMPI showed a relatively high reactivity and reacted with the hydroxyl group of the same and/or different molecules of HA to form an inter- and intramolecular esterification. Apparently, CMPI cross-linked HA films have a much higher cross-linking density and constructed a more rigid three-dimensional network. Therefore, it produced HA films, which dramatically increased its enzymatic stability in aqueous solution of hyaluronidase. The obtained results from elemental analyses, FT-IR spectra and NMR spectra also indicate that acylurea groups were introduced into EDC-cross-linked HA films.
 ...
PMID:Preparation of cross-linked hyaluronic acid film using 2-chloro-1-methylpyridinium iodide or water-soluble 1-ethyl-(3,3-dimethylaminopropyl)carbodiimide. 1525 25


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>