Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UNIPROT:P06889 (Mol)
 630,302 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Amino acids in the serine proteinase inhibitor eglin c important for its inhibitory specificity and activity have been investigated by site-directed mutagenesis. The specificity of eglin c could be changed from elastase to trypsin inhibition by the point mutation Leu45----Arg (L45R) in position P1 [nomenclature according to Schechter and Berger (1967) Biochem. Biophys. Res. Commun. 27, 157-162]. Model building studies based on the crystal structure of mutant L45R [Heinz et al. (1991) J. Mol. Biol. 217, 353-371] were used to rationalize this specificity change. Surprisingly, the double mutant L45R/D46S was found to be a substrate of trypsin and various other serine proteinases. Multidimensional NMR studies show that wild-type eglin c and the double mutant have virtually identical conformations. In the double mutant L45R/D46S, however, the N-H bond vector of the scissile peptide bond shows a much higher mobility, indicating that the internal rigidity of the binding loop is significantly weakened due to the loss or destabilization of the internal hydrogen bond of the P1' residue. Mutant T44P was constructed to examine the role of a proline in position P2, which is frequently found in serine proteinase inhibitors [Laskowski and Kato (1980) Annu. Rev. Biochem. 49, 593-626]. The mutant remains a potent elastase inhibitor but no longer inhibits subtilisin, which could be explained by model building. Both Arg51 and Arg53, located in the core of the molecule and participating in the hydrogen bonding network with residues in the binding loop to maintain rigidity around the scissile bond, were individually replaced with the shorter but equally charged amino acid lysine. Both mutants showed a decrease in their inhibitory potential. The crystal structure of mutant R53K revealed the loss of two hydrogen bonds between the core and the binding loop of the inhibitor, which are partially restored by a solvent molecule, leading to a decrease in inhibition of elastase by 2 orders of magnitude.
 ...
PMID:Changing the inhibitory specificity and function of the proteinase inhibitor eglin c by site-directed mutagenesis: functional and structural investigation. 139 Jun 62

The importance of amino acid side-chains in helix stability has been investigated by making a series of mutations at the N-caps, C-caps and internal positions of the solvent-exposed faces of the two alpha-helices of barnase. There is a strong positional and context dependence of the effect of a particular amino acid on stability. Correlations have been found that provide insight into the physical basis of helix stabilization. The relative effects of Ala and Gly (or Ser) may be rationalized on the basis of solvent-accessible surface areas: burial of hydrophobic surface stabilizes the protein as does exposure to solvent of unpaired hydrogen bond donors or acceptors in the protein. There is a good correlation between the relative stabilizing effects of Ala and Gly at internal positions with the total change in solvent-accessible hydrophobic surface area of the folded protein on mutation of Ala----Gly. The relationship may be extended to the N and C-caps by including an extra term in hydrophilic surface area for the solvent exposure of the non-intramolecularly hydrogen-bonded main-chain CO, NH or protein side-chain hydrogen bonding groups. The requirement for solvent exposure of the C-cap main-chain CO groups may account for the strong preference for residues having positive phi and psi angles at this position, since this alpha L-conformation results in the largest solvent exposure of the C-terminal CO groups. Glycine in an alpha L-conformation results in the greatest exposure of these CO groups. Further, the side-chains of His, Asn, Arg and Lys may, with positive phi and psi-angles, form a hydrogen bond with the backbone CO of residue in position C -3 (residues are numbered relative to the C-cap). The preferences at the C-cap are Gly much greater than His greater than Asn greater than Arg greater than Lys greater than Ala approximately Ser approximately greater than Asp. The preferences at the N-cap are determined by hydrogen bonding of side-chains or solvent to the exposed backbone NH groups and are: Thr approximately Asp approximately Ser greater than Gly approximately Asn greater than Gln approximately Glu approximately His greater than Ala greater than Val much greater than Pro. These general trends may be obscured when mutation allows another side-chain to become a surrogate cap.(ABSTRACT TRUNCATED AT 400 WORDS)
J Mol Biol 1992 Sep 20
PMID:Alpha-helix stability in proteins. I. Empirical correlations concerning substitution of side-chains at the N and C-caps and the replacement of alanine by glycine or serine at solvent-exposed surfaces. 140 68

The crystal and molecular structure of a triacylglyceride lipase (EC 3.1.1.3) from the fungus Rhizomucor miehei was analyzed using X-ray single crystal diffraction data to 1.9 A resolution. The structure was refined to an R-factor of 0.169 for all available data. The details of the molecular architecture and the crystal structure of the enzyme are described. A single polypeptide chain of 269 residues is folded into a rather unusual singly wound beta-sheet domain with predominantly parallel strands, connected by a variety of hairpins, loops and helical segments. All the loops are right-handed, creating an uncommon situation in which the central sheet is asymmetric in that all the connecting fragments are located on one side of the sheet. A single N-terminal alpha-helix provides the support for the other, distal, side of the sheet. Three disulfide bonds (residues 29-268, 40-43, 235-244) stabilize the molecule. There are four cis peptide bonds, all of which precede proline residues. In all, 230 ordered water molecules have been identified; 12 of them have a distinct internal character. The catalytic center of the enzyme is made up of a constellation of three residues (His257, Asp203 and Ser144) similar in structure and function to the analogous (but not homologous) triad found in both of the known families of serine proteinases. The fourth residue in this system equivalent to Thr/Ser in proteinases), hydrogen bonded to Asp, is Tyr260. The catalytic site is concealed under a short amphipatic helix (residues 85 to 91), which acts as "lid", opening the active site when the enzyme is adsorbed at the oil-water interface. In the native enzyme the "lid" is held in place by hydrophobic interactions.
J Mol Biol 1992 Oct 05
PMID:The crystal and molecular structure of the Rhizomucor miehei triacylglyceride lipase at 1.9 A resolution. 140 90

This paper presents an analysis of plots of enthalpy versus heat capacity change at 25 degrees C for the unfolding of proteins and for the dissolution of gaseous, liquid and solid solutes, first reported by Murphy, Privalov & Gill. The negative slope in the enthalpy plot for proteins is interpreted as arising from a large penalty associated with burying polar groups in the protein interior. The small enthalpy changes that accompany protein unfolding at 25 degrees C are also discussed. It is argued that the combined effects of hydrogen bond formation and close packing predict a large positive enthalpy of unfolding. Electrostatic calculations indicate that the penalty associated with burying polar groups is large enough to effectively cancel these terms, leading to the small net enthalpy changes that are observed. The free energy changes associated with protein folding are also discussed. The free energy cost of burying polar groups largely compensates for the stabilizing contribution of the hydrophobic effect and would appear to account for the fact that proteins are marginally stable, independent of their size and of their relative hydrophobicities.
J Mol Biol 1992 Oct 05
PMID:Analysis of the heat capacity dependence of protein folding. 140 93

A number of nucleoside 5'-phosphonates and nucleoside 5'-methylphosphonates were synthesised, to study their ability to inhibit reproduction of HIV-1. Three compounds, 5'-hydrogen phosphonates of 3'-azido-2',3'-dideoxythymidine (AZT-HP, IVc), 3'-fluoro-2',3'-dideoxythymidine (FLT-HP, IVa) and 2',3'-dideoxyadenosine (ddA-HP, I), exhibit potent anti-HIV-1 activity with selectivity indices similar to or better of those of their parent nucleosides.
Mol Biol (Mosk)
PMID:[New 5'-phosphonates, modified through the nucleoside sugar residue, as inhibitors of HIV replication]. 140 17

To study sphingolipid function(s) in Saccharomyces cerevisiae, we have investigated the effects of environmental stress on mutant (SLC) strains (R. C. Dickson, G. B. Wells, A. Schmidt, and R. L. Lester, Mol. Cell. Biol. 10:2176-2181, 1990) that either contain or lack sphingolipids, depending on whether they are cultured with a sphingolipid long-chain base. Strains lacking sphingolipid were unable to grow at low pH, at 37 degrees C, or with high salt concentrations in the medium; these environmental stresses are known to inhibit the growth of some S. cerevisiae strains with a defective plasma membrane H(+)-ATPase. We found that sphingolipids were essential for proton extrusion at low pH and furthermore found that cells lacking sphingolipid no longer exhibited net proton extrusion at normal pH after a 1-min exposure to pH 3. Cells lacking sphingolipid appeared to rapidly become almost completely permeable to protons at low pH. The deleterious effects of low pH could be partially prevented by 1 M sorbitol in the suspension of cells lacking sphingolipid. Proton extrusion at normal pH (pH 6) was significantly inhibited at 39 degrees C only in cells lacking sphingolipid. Thus, the product of an SLC suppressor gene permits life without sphingolipids only in a limited range of environments. Outside this range, sphingolipids appear to be essential for maintaining proton permeability barriers and/or for proton extrusion.
 ...
PMID:Phenotypes of sphingolipid-dependent strains of Saccharomyces cerevisiae. 142 41

The three-dimensional structure in solution of the alpha-neurotoxin from the black mamba (Dendroaspis polylepis polylepis) has been determined by nuclear magnetic resonance spectroscopy. A high quality structure for this 60-residue protein was obtained from 656 NOE distance constraints and 143 dihedral angle constraints, using the distance geometry program DIANA for the structure calculation and AMBER for restrained energy minimization. For a group of 20 conformers used to represent the solution structure, the average root-mean-square deviation value calculated for the polypeptide backbone heavy atoms relative to the mean structure was 0.45 A. The protein consists of a core region from which three finger-like loops extend outwards. It includes a short, two-stranded antiparallel beta-sheet of residues 1-5 and 13-17, a three-stranded antiparallel beta-sheet involving residues 23-31, 34-42 and 51-55, and four disulfide bridges in the core region. There is also extensive non-regular hydrogen bonding between the carboxy-terminal tail of the polypeptide chain and the rest of the core region. Comparison with the crystal structure of erabutoxin-b indicates that the structure of alpha-neurotoxin is quite similar to other neurotoxin structures, but that local structural differences are seen in regions thought to be important for binding of neurotoxins to the acetylcholine receptor. For two regions of the alpha-neurotoxin structure there is evidence for an equilibrium between multiple conformations, which might be related to conformational rearrangements upon binding to the receptor. Overall, the alpha-neurotoxin presents itself as a protein with a stable core and flexible surface areas that interact with the acetylcholine receptor in such a way that high affinity binding is achieved by conformational rearrangements of the deformable regions of the neurotoxin structure.
J Mol Biol 1992 Oct 20
PMID:Nuclear magnetic resonance solution structure of the alpha-neurotoxin from the black mamba (Dendroaspis polylepis polylepis). 143 89

Ricin A-chain is an N-glycosidase that hydrolyzes the adenine ring from a specific adenosine of rRNA. Formycin monophosphate (FMP) and adenyl(3'-->5')guanosine (ApG) were bound to ricin A-chain and their structures elucidated by X-ray crystallography. The formycin ring stacks between tyrosines 80 and 123 and at least four hydrogen bonds are made to the adenine moiety. A residue invariant in this enzyme class, Arg180, appears to hydrogen bond to N-3 of the susceptible adenine. Three hypothetical models for binding a true hexanucleotide substrate, CGAGAG, are proposed. They incorporate adenine binding, shown by crystallography, but also include geometry likely to favor catalysis. For example, efforts have been made to orient the ribose ring in a way that allows solvent attack and oxycarbonium stabilization by the enzyme. The favored model is a simple perturbation of the tetraloop structure determined by nuclear magnetic resonance for similar polynucleotides. The model is attractive in that specific roles are defined for conserved protein residues. A mechanism of action is proposed. It invokes oxycarbonium ion stabilization on ribose by Glu177 in the transition state. Arg180 stabilizes anion development on the leaving adenine by protonation at N-3 and may activate a trapped water molecule that is the ultimate nucleophile in the depurination.
J Mol Biol 1992 Oct 20
PMID:X-ray analysis of substrate analogs in the ricin A-chain active site. 143 90

The solution structure of the B9(Asp) mutant of human insulin has been determined by two-dimensional 1H nuclear magnetic resonance spectroscopy. Thirty structures were calculated by distance geometry from 451 interproton distance restraints based on intra-residue, sequential and long-range nuclear Overhauser enhancement data, 17 restraints on phi torsional angles obtained from 3JH alpha HN coupling constants, and the restraints from 17 hydrogen bonds, and the three disulphide bridges. The distance geometry structures were optimized using restrained molecular dynamics (RMD) and energy minimization. The average root-mean-square deviation for the best 20 RMD refined structures is 2.26 A for the backbone and 3.14 A for all atoms if the less well-defined N and C-terminal residues are excluded. The helical regions are better defined, with root-mean-square deviation values of 1.11 A for the backbone and 2.03 A for all atoms. The data analysis and the calculations show that B9(Asp) insulin, in water solution at the applied pH (1.8 to 1.9), is a well-defined dimer with no detectable difference between the two monomers. The association of the two monomers in the solution dimer is relatively loose as compared with the crystal dimer. The overall secondary and tertiary structures of the monomers in the 2Zn crystal hexamer is found to be preserved. The conformation-averaged NMR structures obtained for the monomer is close to the structure of molecule 1 in the hexamer of the 2Zn insulin crystal. However, minor, but significant deviations from this structure, as well as from the structure of monomeric insulin in solution, exist and are ascribed to the absence of the hexamer and crystal packing forces, and to the presence of monomer-monomer interactions, respectively. Thus, the monomer in the solution dimer shows a conformation similar to that of the crystal monomer in molecular regions close to the monomer-monomer interface, whereas it assumes a conformation similar to that of the solution structure of monomeric insulin in other regions, suggesting that B9(Asp) insulin adopts a monomer-like conformation when this is not inconsistent with the monomer-monomer arrangement in the dimer.
J Mol Biol 1992 Oct 20
PMID:Three-dimensional solution structure of an insulin dimer. A study of the B9(Asp) mutant of human insulin using nuclear magnetic resonance, distance geometry and restrained molecular dynamics. 143 91

In order to obtain a better structural framework for understanding the catalytic mechanism of carbonic anhydrase, a number of inhibitor complexes of the enzyme were investigated crystallographically. The three-dimensional structure of free human carbonic anhydrase II was refined at pH 7.8 (1.54 A resolution) and at pH 6.0 (1.67 A resolution). The structure around the zinc ion was identical at both pH values. The structure of the zinc-free enzyme was virtually identical with that of the native enzyme, apart from a water molecule that had moved 0.9 A to fill the space that would be occupied by the zinc ion. The complexes with the anionic inhibitors bisulfite and formate were also studied at neutral pH. Bisulfite binds with one of its oxygen atoms, presumably protonized, to the zinc ion and replaces the zinc water. Formate, lacking a hydroxyl group, is bound with its oxygen atoms not far away from the position of the non-protonized oxygen atoms of the bisulfite complex, i.e. at hydrogen bond distance from Thr199 N and at a position between the zinc ion and the hydrophobic part of the active site. The result of these and other studies have implications for our view of the catalytic function of the enzyme, since virtually all inhibitors share some features with substrate, product or expected transition states. A reaction scheme where electrophilic activation of carbon dioxide plays an important role in the hydration reaction is presented. In the reverse direction, the protonized oxygen of the bicarbonate is forced upon the zinc ion, thereby facilitating cleavage of the carbon-oxygen bond. This is achieved by the combined action of the anionic binding site, which binds carboxyl groups, the side-chain of threonine 199, which discriminates between hydrogen bond donors and acceptors, and hydrophobic interaction between substrate and the active site cavity. The required proton transfer between the zinc water and His64 can take place through water molecules 292 and 318.
J Mol Biol 1992 Oct 20
PMID:Structure of native and apo carbonic anhydrase II and structure of some of its anion-ligand complexes. 143 93


<< Previous 1 2 3 4 5 6 7 8 9 10