Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UNIPROT:P06889 (Mol)
 630,302 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Enzyme structures determined in organic solvents show that most organic molecules cluster in the active site, delineating the binding pocket. We have developed algorithms to perform solvent mapping computationally, rather than experimentally, by placing molecular probes (small molecules or functional groups) on a protein surface, and finding the regions with the most favorable binding free energy. The method then finds the consensus site that binds the highest number of different probes. The probe-protein interactions at this site are compared to the intermolecular interactions seen in the known complexes of the enzyme with various ligands (substrate analogs, products, and inhibitors). We have mapped thermolysin, for which experimental mapping results are also available, and six further enzymes that have no experimental mapping data, but whose binding sites are well characterized. With the exception of haloalkane dehalogenase, which binds very small substrates in a narrow channel, the consensus site found by the mapping is always a major subsite of the substrate-binding site. Furthermore, the probes at this location form hydrogen bonds and non-bonded interactions with the same residues that interact with the specific ligands of the enzyme. Thus, once the structure of an enzyme is known, computational solvent mapping can provide detailed and reliable information on its substrate-binding site. Calculations on ligand-bound and apo structures of enzymes show that the mapping results are not very sensitive to moderate variations in the protein coordinates.
J Mol Biol 2003 Oct 03
PMID:Identification of substrate binding sites in enzymes by computational solvent mapping. 1449 12

The BfiI endonuclease cleaves DNA at fixed positions downstream of an asymmetric sequence. Unlike other restriction enzymes, it functions without metal ions. The N-terminal half of BfiI is similar to Nuc, an EDTA-resistant nuclease from Salmonella typhimurium that belongs to the phosphoplipase D superfamily. Nuc is a dimer with one active site at its subunit interface, as is BfiI, but it cuts DNA non-specifically. BfiI was cleaved by thermolysin into an N-terminal domain, which forms a dimer with non-specific nuclease activity, and a C-terminal domain, which lacks catalytic activity but binds specifically to the recognition sequence as a monomer. On denaturation with guanidinium, BfiI underwent two unfolding transitions: one at a relatively low concentration of guanidinium, to a dimeric non-specific nuclease; a second at a higher concentration, to an inactive monomer. The isolated C-terminal domain unfolded at the first (relatively low) concentration, the isolated N-terminal at the second. Hence, BfiI consists of two physically separate domains, with catalytic and dimerisation functions in the N terminus and DNA recognition functions in the C terminus. It is the first example of a restriction enzyme generated by the evolutionary fusion of a DNA recognition domain to a phosphodiesterase from the phospholipase D superfamily. BfiI may consist of three structural units: a stable central core with the active site, made from two copies of the N-terminal domain, flanked by relatively unstable C-terminal domains, that each bind a copy of the recognition sequence.
J Mol Biol 2004 Feb 06
PMID:Generation of the BfiI restriction endonuclease from the fusion of a DNA recognition domain to a non-specific nuclease from the phospholipase D superfamily. 1474 Dec 5

Unless the native conformation has an unstructured region, proteases cannot effectively digest a protein under native conditions. Digestion must occur from a higher energy form, when at least some part of the protein is exposed to solvent and becomes accessible by proteases. Monitoring the kinetics and denaturant dependence of proteolysis under native conditions yields insight into the mechanism of proteolysis as well as these high-energy conformations. We propose here a generalized approach to exploit proteolysis as a tool to probe high-energy states in proteins. This "native state proteolysis" experiment was carried out on Escherichia coli ribonuclease HI. Mass spectrometry and N-terminal sequencing showed that thermolysin cleaves the peptide bond between Thr92 and Ala93 in an extended loop region of the protein. By comparing the proteolysis rate of the folded protein and a peptidic substrate mimicking the sequence at the cleavage site, the energy required to reach the susceptible state (Delta G(proteolysis)) was determined. From the denaturant dependence of Delta G(proteolysis), we determined that thermolysin digests this protein through a local fluctuation, i.e. localized unfolding with minimal change in solvent assessable surface area. Proteolytic susceptibilities of proteins are discussed based on the finding of this local fluctuation mechanism for proteolysis under native conditions.
J Mol Biol 2004 Nov 05
PMID:Probing the high energy states in proteins by proteolysis. 1549 24

Angiotensin-converting enzyme (ACE) is a zinc- and chloride-dependent metallopeptidase that plays a vital role in the metabolism of biologically active peptides. Until recently, much of the inhibitor design and mechanism of action of this ubiquitous enzyme was based on the structures of carboxypeptidase A and thermolysin. When compared to the recently solved structures of the testis isoform of ACE (tACE) and its Drosophila homologue (AnCE), carboxypeptidase A showed little structural homology outside of the active site, while thermolysin revealed significant but less marked overall similarity. The ellipsoid-shaped structure of tACE, which has a preponderance of alpha-helices, is characterised by a core channel that has a constriction approximately 10 A from its opening where the zinc-binding active site is located. Comparison of the native protein with the inhibitor-bound form (lisinopril-tACE) does not reveal any striking differences in the conformation of the inhibitor binding site, disfavouring an open and closed configuration. However, the inhibitor complex does provide insights into the network of hydrogen-bonding and ionic interactions in the active site as well as the mechanism of ACE substrate hydrolysis. The three-dimensional structure of ACE now paves the way for the rational design of a new generation of domain-selective ACE inhibitors.
Cell Mol Life Sci 2004 Nov
PMID:Structure of angiotensin I-converting enzyme. 1554 68

Thermolysin is a zinc-metalloendopeptidase secreted by the gram-positive thermophilic bacterium Bacillus thermoproteolyticus. Thermolysin belongs to the gluzinicin family of enzymes, which is selectively inhibited by Steptomyces metalloproteinase inhibitor (SMPI). Very little is known about the interaction between SMPI and thermolysin. Knowledge about the protein-protein interactions is very important for designing new thermolysin inhibitors with possible industrial or pharmaceutical applications. In the present study, two binding modes between SMPI and thermolysin were studied by 2300 picoseconds (ps) of comparative molecular dynamics (MD) simulations and calculation of the free energy of binding using the molecular mechanics-Poisson-Boltmann surface area (MM/PBSA) method. One of the positions, the 'horizontal arrow head docking' (HAHD) was similar to the previously proposed binding mode by Tate et al. (Tate, S., Ohno, A., Seeram, S. S., Hiraga, K., Oda, K., and Kainosho, M. J. Mol. Biol. 282, 435-446 (1998)). The other position, the 'vertical arrow head docking' (VAHD) was obtained by a manual docking guided by the shape and charge distribution of SMPI and the binding pocket of thermolysin. The calculations showed that SMPI had stronger interactions with thermolysin in the VAHD than in the HAHD complex, and the VAHD complex was considered more realistic than the HAHD complex. SMPI interacted with thermolysin not only at the active site but had auxiliary binding sites contributing to proper interactions. The VAHD complex can be used for designing small molecule inhibitors mimicking the SMPI-thermolysin binding interfaces.
 ...
PMID:The protein-protein interactions between SMPI and thermolysin studied by molecular dynamics and MM/PBSA calculations. 1570 24

Dcp from Escherichia coli is a 680 residue cytoplasmic peptidase, which shows a strict dipeptidyl carboxypeptidase activity. Although Dcp had been assigned to the angiotensin I-converting enzymes (ACE) due to blockage by typical ACE inhibitors, it is currently grouped into the M3 family of mono zinc peptidases, which also contains the endopeptidases neurolysin and thimet oligopeptidase (TOP). We have cloned, expressed, purified, and crystallized Dcp in the presence of an octapeptide "inhibitor", and have determined its 2.0A crystal structure using MAD methods. The analysis revealed that Dcp consists of two half shell-like subdomains, which enclose an almost closed two-chamber cavity. In this cavity, two dipeptide products presumably generated by Dcp cleavage of the octapeptide bind to the thermolysin-like active site fixed to side-chains, which are provided by both subdomains. In particular, an Arg side-chain backed by a Glu residue, together with two Tyr phenolic groups provide a charged anchor for fixing the C-terminal carboxylate group of the P2' residue of a bound substrate, explaining the strict dipeptidyl carboxypeptidase specificity of Dcp. Tetrapeptidic substrates are fixed only via their main-chain functions from P2 to P2', suggesting a broad residue specificity for Dcp. Both subdomains exhibit very similar chain folds as the equivalent but abducted subdomains of neurolysin and TOP. Therefore, this "product-bound" Dcp structure seems to represent the inhibitor/substrate-bound "closed" form of the M3 peptidases, generated from the free "open" substrate-accessible form by a hinge-bending mechanism. A similar mechanism has recently been demonstrated experimentally for ACE2.
J Mol Biol 2005 May 27
PMID:Crystal structure of the E. coli dipeptidyl carboxypeptidase Dcp: further indication of a ligand-dependent hinge movement mechanism. 1587 71

The tricorn interacting factor F3 is an 89 kDa zinc aminopeptidase from the archaeon Thermoplasma acidophilum. Together with the tricorn interacting factors F1 and F2, F3 degrades the tricorn protease products and thus completes the proteasomal degradation pathway by generating free amino acids. Here, we present the crystal structures of F3 in three different conformations at 2.3 A resolution. The zinc aminopeptidase is composed of four domains: an N-terminal saddle-like beta-structure domain; a thermolysin-like catalytic domain; a small barrel-like beta-structure domain; and an alpha-helical C-terminal domain, the latter forming a deep cavity at the active site. Three crystal forms provide snapshots of the molecular dynamics of F3 where the C-terminal domain can adapt to form an open, an intermediate and a nearly closed cavity, respectively. With the conserved Zn(2+)-binding motifs HEXXH and NEXFA as well as the N-terminal substrate-anchoring glutamate residues, F3 together with the leukotriene A4 hydrolase, represents a novel gluzincin subfamily of aminoproteases. We discuss the functional implications of these structures with respect to the underlying catalytic mechanism, substrate recognition and processing, and possible component interactions.
J Mol Biol 2005 Jun 17
PMID:Crystal structures of the tricorn interacting factor F3 from Thermoplasma acidophilum, a zinc aminopeptidase in three different conformations. 1589 68

A thermophilic Bacillus sp. was isolated that secreted an extracellular, thermostable lipolytic enzyme. The enzyme was purified to 58 folds with a specific activity of 9730 units/mg of protein and yield of 10% activity by ammonium sulphate precipitation, Phenyl Sepharose chromatography, gel-permeation followed by Q Sepharose chromatography. The relative molecular mass of the protein was determined to be 61 kDa by SDS-PAGE and approximately 60 kDa by gel permeation chromatography. The enzyme showed optimal activity at 60-65 ( composite function)C and retained 100% activity after incubation at 60 ( composite function)C and pH 8.0 for 1 h. The optimum pH was determined to be 8.5. It exhibited 50% of its original activity after 65 min incubation at 70 ( composite function)C and 23 min incubation at 80 ( composite function)C. Catalytic function of lipase was activated by Mg(++) (10 mM), while mercury (10 mM) inactivated the enzyme completely. No effect on enzyme activity was observed with trypsin and chymotrypsin treatment, while 50% inhibition was observed with thermolysin. It was demonstrated that PMSF, SDS, DTT, EDTA, DEPC, betaME (100 mM each) and eserine (10 mM) inhibited the activity of the lipolytic enzyme. With p-nitrophenyl laurate as a substrate, the enzyme exhibited a K ( m ) and V (max) of 0.5 mM and 0.139 microM/min/ml. The enzyme showed preference for short chain triacylglycerol and hydrolyzes triolein at all positions. In contrast to other thermostable Bacillus lipases, this enzyme has very low content of hydrophobic amino acids (22.58 %). Immunological studies showed that the active site and antigen-binding site of enzyme do not overlap.
Mol Cell Biochem 2006 Oct
PMID:A thermostable lipolytic enzyme from a thermophilic Bacillus sp.: purification and characterization. 1692 23

Major plasma fibronectin from Japanese catfish was isolated using affinity chromatography, and the fibronectin was digested with thermolysin. Peptide sequences of the fragments were obtained by peptide sequencer. Complete fibronectin cDNA was obtained from Japanese catfish liver cells using 5'-rapid amplification of cDNA end (RACE) and 3'-RACE based on the peptide sequences. It consists of a 6885 bp open reading frame, which is putatively translated to a protein of 2295 amino acids resides. The catfish fibronectin has 12 type-I modules, 2 type-II modules and 15 type-III modules, and variable sites V and lacks both EIIIA and EIIIB sites. Homology of the entire amino acids residues of catfish fibronectin with those of mammals (Homo sapiens, Rattus norvegicus, Bos taurus) is only 47-48% and 57% with that of Danio rerio. However, amino acid sequence of type-I module 3 and type-I module12 are highly conserved and homology exceeds 80% with corresponding regions of the mammals, Xenopus laevis and fish species (Silurus asotus and D. rerio). Phylogenetic analysis indicates that only type-I module 4 shows a different pattern of phylogenetic tree. One major fibronectin mRNA was detected in whole liver and hepatocytes by northern hybridization, however, five to six other bands were also detected in both samples.
Comp Biochem Physiol B Biochem Mol Biol 2007 Jan
PMID:Isolation and identification of the major plasma fibronectin cDNA from Japanese catfish Silurus asotus. 1705 32

Native states of proteins are flexible, populating more than just the unique native conformation. The energetics and dynamics resulting from this conformational ensemble are inherently linked to protein function and regulation. Proteolytic susceptibility is one feature determined by this conformational energy landscape. As an attempt to investigate energetics of proteins on a proteomic scale, we challenged the Escherichia coli proteome with extensive proteolysis and determined which proteins, if any, have optimized their energy landscape for resistance to proteolysis. To our surprise, multiple soluble proteins survived the challenge. Maltose binding protein, a survivor from thermolysin digestion, was characterized by in vitro biophysical studies to identify the physical origin of proteolytic resistance. This experimental characterization shows that kinetic stability is responsible for the unusual resistance in maltose binding protein. The biochemical functions of the identified survivors suggest that many of these proteins may have evolved extreme proteolytic resistance because of their critical roles under stressed conditions. Our results suggest that under functional selection proteins can evolve extreme proteolysis resistance by modulating their conformational energy landscapes without the need to invent new folds, and that proteins can be profiled on a proteomic scale according to their energetic properties by using proteolysis as a structural probe.
J Mol Biol 2007 May 18
PMID:Energetics-based protein profiling on a proteomic scale: identification of proteins resistant to proteolysis. 1740 Feb 45


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>