Gene/Protein
Disease
Symptom
Drug
Enzyme
Compound
Pivot Concepts:
Gene/Protein
Disease
Symptom
Drug
Enzyme
Compound
Target Concepts:
Gene/Protein
Disease
Symptom
Drug
Enzyme
Compound
Query: UNIPROT:P06889 (
Mol
)
630,302
document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)
The crystal structure of an Escherichia coli thymidylate synthase (TS) ternary complex containing 5-fluoro-2'-deoxyuridylate (FdUMP) and 10-propargyl-5,8-dideazafolate (PDDF) has been determined and refined at 2.3 A resolution. Each of the two chemically identical subunits folds into a three-layer domain anchored by a large six-stranded mixed beta-sheet. The backside of one sheet is juxtaposed against the corresponding face of the equivalent sheet in the second protomer creating a beta-sandwich. In contrast to other proteins of known structure in which aligned beta-sheets stack face to face with a counterclockwise rotation, sheets in the TS dimer are related by a clockwise
twist
. The substrate-binding pocket is a large funnel-shaped cleft extending some 25 A into the interior of each subunit and is surrounded by 30 amino acids, 28 from one subunit and two from the other. FdUMP binds at the bottom of this pocket covalently linked through C-6 to the sulfur of Cys146. Up-pointing faces of the pyrimidine and ribose rings are exposed to provide a complementary docking surface for the quinazoline ring of PDDF. The quinazoline inhibitor binds in a partially folded conformation with its p-aminobenzoyl glutamate tail exposed at the entrance to the active site cleft. Ternary complex formation is associated with a large conformational change involving four residues at the protein's carboxy terminus that close down on the distal side of the inhibitor's quinazoline ring, capping the active site and sequestering the bound ligands from bulk solvent.
J
Mol
Biol 1990 Aug 20
PMID:Crystal structure of Escherichia coli thymidylate synthase containing bound 5-fluoro-2'-deoxyuridylate and 10-propargyl-5,8-dideazafolate. 220 78
We found a pentapeptide conformation, termed a type I
twist
, which has a strikingly high propensity (56%) for aspartic acid in the first position. Type I twists include the active site loops from cellular and viral aspartic proteases, with the catalytic Asp in the first position. Fifteen other type I twists, from non-homologous proteins, were found among high-resolution structures in the Protein Data Bank using a comparison method based on main-chain torsion angles. We propose that the Asp affects electrostatic interactions and thus plays a major structural role in the formation of this recurring motif, in addition to its catalytic role in the aspartic proteases.
J
Mol
Biol 1990 Nov 20
PMID:A common pentapeptide conformation occurs in viral acid proteases and other proteins. 225 19
We have studied complexes between the gene 5 protein (gp5) of bacteriophage M13 and various polynucleotides, including single-stranded DNA, using ultraviolet absorption and linear dichroism. Upon complex formation the absorption spectra of both the protein and the polynucleotides change. The protein absorption changes indicate that for at least two of the five tyrosine residues per protein monomer the environment becomes less polar upon binding to the polynucleotides but also to the oligonucleotide p(dT)8. All gp5-polynucleotide complexes give rise to intense linear dichroism spectra. These spectra are dominated by negative contributions from the bases, but also a small positive dichroism of the protein can be discerned. The spectra can be explained by polynucleotide structures, which are the same in all complexes. The base orientations are characterized by a substantial inclination and propellor
twist
. The number of possible combinations of inclination and propeller
twist
values, which are in agreement with the linear dichroism results, is rather limited. The base orientations with respect to the complex axis are essentially different from those in the complex with the single-stranded DNA-binding protein gp32 of bacteriophage T4.
J
Mol
Biol 1990 Dec 05
PMID:Complex between single-stranded DNA and gene 5 protein of bacteriophage M13 studied with linear dichroism and ultraviolet absorption. 225 37
A prokaryotic expression vector containing the rec A promoter and a translational enhancer element from the gene 10 leader of bacteriophage T7 was used to direct efficient synthesis of rat intestinal fatty acid binding protein (I-FABP) in E. coli. Expression of I-FABP in E. coli has no apparent, deleterious effects on the organism. High levels of expression of I-FABP mRNA in supE+ strains of E. coli, such as JM101, is associated with suppression of termination at its UGA stop codon. This can be eliminated by using a supE-strain as MG1655 and by site-directed mutagenesis of the cDNA to create an in frame UAA stop codon. E. coli-derived rat I-FABP lacks its initiator Met residues. It has been crystallized with and without bound palmitate. High resolution x-ray crystallographic studies of the 131 residue apo- and holo-proteins have revealed the following. I-FABP contains 10 anti-parallel beta-strands organized into two orthogonally situated beta-sheets. The overall conformation of the protein resembles that of a clam--hence the term beta-clam. The bound ligand is located in the interior of the protein. Its carboxylate group forms part of a unique five member hydrogen bonding network consisting of two ordered solvent molecules as well as the side chains of Arg106 and Gln115. The hydrocarbon chain of the bound C16:0 fatty acid has a distinctive bent conformation with a slight left-handed helical
twist
. This conformation is maintained by interactions with the side chains of a number of hydrophobic and aromatic amino acids. Apo-I-FABP has a similar overall conformation to holo-I-FABP indicating that the beta-clam structure is stable even without bound ligand. The space occupied by bound ligand in the core of the holo-protein is occupied by additional ordered solvent molecules in the apo-protein. Differences in the side chain orientations of several residues located over a potential opening to the cores of the apo- and holo-proteins suggest that solvent may play an important role in the binding mechanism.(ABSTRACT TRUNCATED AT 400 WORDS)
Mol
Cell Biochem
PMID:Expression of rat intestinal fatty acid binding protein in E. coli and its subsequent structural analysis: a model system for studying the molecular details of fatty acid-protein interaction. 226 73
The role of solvation on the sequence dependent conformational variabilities in DNA has been studied by calculating hydration free energies from solvent accessible surface areas for several base steps, as a function of various helical parameters, roll,
twist
and propeller
twist
. The results of roll calculations suggest opposite trends for AA and GG steps, with the former tending to have a compressed minor groove and the latter a compressed major groove. These trends are consistent with the experimental findings on sequence preferences and the nature of anisotropic bending of DNA observed in nucleosomes (Drew, H.R. and Travers, A.A., J.
Mol
. Biol. 186, 773-790 (1985); Satchwell, S.C., Drew, H.R. and Travers, A.A., J.
Mol
. Biol. 191, 659-675 (1986)) and CAP-DNA interactions (Gartenberg, M.R. and Crothers, D.M., Nature 333, 824-829, (1988)). Solvation energy profiles also indicate preferences for the base pairs in GG and AA steps to adopt low and high propeller twists, respectively. Such agreements may either reflect a coincidence of solvation effects with other energy terms or a dominance of solvent effects. The results are discussed in the context of the crystallographic observations of structural tendencies.
...
PMID:Solvation effects on the sequence variability of DNA double helical conformations. 227 93
In this work, we demonstrate that it is possible to determine the molar cyclization factor jM from single ligation reactions in which both circular and linear dimer DNA species are formed concurrently from linear monomers. This approach represents a significant improvement over previous methods, in which jM is evaluated from the ratio of the rate constants for two separate processes; namely (1) the cyclization of linear DNA and (2) the association of two linear molecules to form linear dimers. Determination of jM for a 366 base-pair molecule yields 5.8 X 10(-8) M, in close agreement with the value of 5.6 X 10(-8) M determined by Shore et al. for the same molecule. Using the current approach for the determination of jM, we have investigated the dependence on NaCl concentration (0 to 162 mM-NaCl, 1 mM-MgCl2) of both the lateral and torsional flexibilities of DNA. The principal observation is that both quantities are essentially constant over the above range of NaCl concentrations, with the persistence length P approximately 450 (+/- 15) A, and the torsional elastic constant C approximately 2.0 (+/- 0.2) X 10(-19) erg cm. These observations are in accord with the previous theoretical prediction that P becomes essentially independent of NaCl concentration above 10 to 20 mM. We have examined the dependence of the helical repeat of DNA on NaCl concentration over the above range, and have found the value of 10.44 base-pairs per turn to be essentially constant over that range. This last result suggests that earlier studies have overestimated the dependence of DNA helical
twist
on salt concentration.
J
Mol
Biol 1990 Mar 20
PMID:Application of the method of phage T4 DNA ligase-catalyzed ring-closure to the study of DNA structure. II. NaCl-dependence of DNA flexibility and helical repeat. 231 4
An equation for calculating the distances between the atoms involved in forming an idealized hydrogen bond in a parallel or antiparallel beta-barrel has been derived by adjusting the corresponding data given by Pauling and Corey for a beta-sheet. Based on these distances, a geometrical optimization method was developed, by which one can generate various idealized beta-barrels: parallel or antiparallel, tilted or non-tilted, right-tilted or left-tilted. For each type of idealized beta-barrel thus obtained, the corresponding conformation and characteristic geometric parameters as well as their relationship are analyzed and discussed. Since the strand in a tilted beta-barrel traces a curve rather than a straight line on a cylinder-like surface, a regular chain in which the dihedral angles of each residue are the same cannot form a tilted beta-barrel but only a non-tilted beta-barrel. As observed, the strands of a right-tilted beta-barrel possess a very strong right-handed
twist
. The radii of the idealized tilted parallel and antiparallel beta-barrels are greater than those of the corresponding non-tilted ones by approximately 1 A and approximately 1.5 A, respectively. Consequently, there is relatively more room for a tilted beta-barrel to accommodate the internal side-chains, suggesting that a conformational change from a non-tilted beta-barrel to a tilted one would ease the repulsion among the crowded internal side-chains so as to make the structure more stable. The values of root-mean-square fits indicate that the idealized right-tilted beta-barrels coincide quite well with the observed beta-barrels in both parallel and antiparallel cases.
J
Mol
Biol 1990 May 20
PMID:Conformational and geometrical properties of idealized beta-barrels in proteins. 234 9
Using electron microscopy and topological methods, we have deduced an average structure for negatively supercoiled circular DNA in solution. Our data suggest that DNA has a branched plectonemic (interwound) form over the range of supercoiling tested. The length of the superhelix axis is constant at 41% of the DNA length, whereas the superhelix radius decreases essentially hyperbolically as supercoiling increases. The number of supercoils is 89% of the linking deficit. Both writhe and
twist
change with supercoiling, but the ratio of the change in writhe to the change in
twist
is fixed at 2.6:1. The extent of branching of the superhelix axis is proportional to the length of the plasmid, but is insensitive to superhelix density. The relationship between DNA flexibility constants for twisting and bending calculated using our structural data is similar to that deduced from previous studies. The extended thin form of plectonemically supercoiled DNA offers little compaction for cellular packaging, but promotes interaction between cis-acting sequence elements that may be distant in primary structure. We discuss additional biological implications of our structural data.
J
Mol
Biol 1990 Jun 20
PMID:Structure of plectonemically supercoiled DNA. 235 28
The crystal structure of cardiotoxin VII4 from Naja mossambica mossambica was refined to 2.5 A resolution. Fifty ordered solvent sites were localized and included in the refinement. The final R factor is 0.197 (lambda/(2sin theta) less than 5 A; F greater than 3 sigma). The three-dimensional structure is characterized by two beta-sheets. Of particular interest is the two-stranded beta-sheet in the N-terminal region. This shows a large right-handed
twist
and, though strongly connected to the core of the molecule, and in particular to the C-terminal end, protrudes out of the bulk of the molecule. The segment of four amino acid residues connecting the two strands of this sheet is particularly exposed. It contains an invariant proline residue that has probably an important structural role, and is completely hydrophobic. Two other conserved hydrophobic zones were identified; the largest extends over the second and third loops, on one side only of the molecule. All side-chains of invariant hydrophobic character (except proline residues) belong to one of these three zones. Also discussed are the dimeric assembly and the rather loose packing in the crystal. The three-dimensional structure is compared with that of short and long alpha-neurotoxins. Comparison with two-dimensional nuclear magnetic resonance results on the 68% homologous cardiotoxin CT X IIb shows an excellent overall agreement. A few differences are probably genuine.
J
Mol
Biol 1990 Jul 05
PMID:Cardiotoxin VII4 from Naja mossambica mossambica. The refined crystal structure. 237 Jun 66
The influence of 11 beta-phenyl substitution upon 4,9-dien-3-one steroid-backbone conformations is calculated by means of the MM2p molecular mechanics scheme. In the case of steroids having a 13 beta configuration, the lowest strain energy is always evaluated for the conformational combination of rings A(inverted) B(normal) while, moreover, the 11 beta substitution increases the relative stability of the conformation A(normal) B(normal) compared to the nonsubstituted compound. Introduction of the 11 beta substituent causes some bowing of the energy-minimum structures in the A-ring region toward the beta side. For 13 alpha configurated steroids, the ring conformations A(inverted) B(normal) C(boat) and A(normal) B(inverted) C(
twist
/boat) are found to be energetically preferred. Quantitative description of different ring conformations using asymmetry and pseudorotational parameters as well as the comparison of molecular mechanics and available X-ray structure data give an impression of the conformational mobility. Whereas the effect of 11 beta substitution within a given ring conformation is limited, contributions to molecular flexibility can be found in the ability to adopt different basic conformations and in the occupation of near-minimum structures. An X-ray crystal structure analysis of a potential antiprogestational steroid has been performed, and the results are in good agreement with the calculated structure.
J
Mol
Graph 1989 Sep
PMID:Molecular mechanics and X-ray crystal structure investigations on conformations of 11 beta substituted 4,9-dien-3-one steroids. 248 52
<< Previous
1
2
3
4
5
6
7
8
9
10
Next >>