Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UNIPROT:P00790 (PGA)
 2,475 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The pharmacokinetics and disposition of valproic acid (VPA) have been assessed in pregnant sheep after both maternal and fetal iv bolus administration. The time course of VPA and 16 of its metabolites was followed in maternal and fetal arterial blood, amniotic fluid, and fetal tracheal fluid for 48 hr after administration. Fetal blood gas, acid-base, metabolic, cardiovascular, and fetal breathing activity parameters were also monitored. The disposition of VPA in maternal serum is best described by a biexponential function with a terminal elimination half-life of 2.13 +/- 0.49 hr and volume of distribution of 0.242 +/- 0.036 liter/kg. VPA transfer to fetal serum and other fetal fluids was rapid after drug administration. There was significant fetal exposure to VPA after maternal dosing (mean AUCinfinityFA/AUCinfinityMA = 0.410 +/- 0.118). Similarly, the disposition of VPA in fetal serum after fetal dosing is best described by a biexponential decay with a terminal elimination half-life of 3.37 +/- 1.37 hr. Once again, VPA transfer to other fluids was rapid. However, unlike basic compounds studied previously, VPA did not accumulate extensively in either amniotic or fetal tracheal fluid. The following metabolites were detected after drug administration in these experiments: (E)- and (Z)-2-ene VPA, (E)- and (Z)-3-ene VPA, 4-ene VPA, 3-keto VPA, 4-keto VPA, 3-OH VPA, 4-OH VPA, 5-OH VPA, and 2-PGA. Both maternal and fetal bolus administration of VPA elicited a significant reduction in fetal breathing movements, which may be attributed to the drug's action on gamma-aminobutyric acid dynamics in the central nervous system (CNS). This suggests that the significant fetal exposure to VPA may produce further CNS-related effects in utero.
Drug Metab Dispos 1995 Dec
PMID:The pharmacokinetics of valproic acid in pregnant sheep after maternal and fetal intravenous bolus administration. 868 48

The impact of intraluminal acid and pepsin on the rate of esophageal luminal release of transforming growth factor alpha (TGF alpha), measured by RIA, in 21 asymptomatic volunteers and 26 patients with reflux esophagitis (RE) was investigated. Esophageal secretion was collected, using an esophageal perfusion catheter, during mucosal exposure to NaCl, HCl or HCl/Pepsin and final saline. The basal rate of luminal TGF alpha release in controls was steady throughout the entire four perfusion periods with saline. This rate declined by 71% during mucosal exposure to HCl (p = 0.002) and by 74% during esophageal perfusion with HCl/pepsin (p = 0.011). The basal rate of luminal TGF alpha release in patients with RE was 27% higher than the corresponding value in controls (1.076 +/- 0.140 vs. 0.850 +/- 0.180 ng/min, p = 0.050). Mucosal exposure to acid and acid/pepsin solutions in RE patients also resulted in a significant decline in the luminal release of TGF alpha by 43% (p < 0.001) and by 42% (p < 0.001) respectively. Despite this decline, TGF alpha in patients with RE was significantly higher (p < 0.001) than in controls. The decline in esophageal TGF alpha release during HCl and HCl/pepsin exposure may facilitate the development of mucosal damage. The increase in esophageal TGF alpha release in patients with RE may represent a compensatory mechanism developed by the mucosal inflammatory changes.
J Clin Gastroenterol 1996 Dec
PMID:Detrimental impact of acid and pepsin on the rate of luminal release of transforming growth factor alpha. Its potential pathogenetic role in the development of reflux esophagitis. 895 27

In this study, a new visual characterization method was developed using laser scanning confocal microscopy (LSCM) to study morphologic properties, particularly at the fiber-matrix interface, by optical sectioning of bioabsorbable single-fiber composites. The interface gap width (IGW) between the fiber and matrix, and the changes in IGW after in vitro hydrolysis, named the gap rate (Rg), were measured from images obtained using the LSCM. Higher values for IGW and Rg showed faster degradation of the fiber-matrix interface. These parameters were used to investigate the effects of strain, wicking, different reinforcing fibers, and gamma-irradiation on the fiber-matrix interface morphology. The component materials used were nonbioabsorbable AS4 carbon (C) fibers, bioabsorbable calcium phosphate (CaP), poly(glycolic acid) (PGA), and chitin fibers, and bioabsorbable poly(L-lactic acid) (PLLA) matrix. The application of strain on CaP/PLLA composites increased the IGW up to about 15%, after which there was no change up to 25%. The Rg for CaP/PLLA composites with the fiber ends exposed in vitro (permitting wicking) was greater than for CaP/PLLA with the fiber ends embedded completely within the matrix (preventing wicking). Open-end C/PLLA composites had the slowest rate of interface degradation in vitro, followed by chitin/PLLA, PGA/PLLA, and CaP/PLLA. The exposure of closed-end CaP/PLLA composites to 4 Mrad of gamma-irradiation, in air at room temperature or in vaccuum at 77K, accelerated the rate of interface degradation in vitro. In conclusion, an effective new visual characterization method was developed using LSCM, and it was used to show that (a) moderate strain could accelerate the degradation of the interface, (b) fiber-matrix interface wicking could accelerate the rate of degradation of the interface, (c) the rate of interface degradation depends on the type of fiber used, and (d) gamma-irradiation could accelerate the rate of interface degradation. Furthermore, the results of LSCM analysis of different reinforcing fibers with a PLLA matrix agree with measurements of interfacial shear strength (IFSS) and single-fiber tensile strength reported in Part I of this study.
J Biomed Mater Res 1997 Dec 05
PMID:Fiber-matrix interface studies on bioabsorbable composite materials for internal fixation of bone fractures. II. A new method using laser scanning confocal microscopy. 936 40

Since the early 1970s, bioabsorbable polymers have been used increasingly as suture and device materials. Bioabsorbable materials are high-molecular-weight polymers of polylactide (PLA; poly[lactic acid]) or polyglycolide (PGA; poly[glycolic acid]). The mechanical properties of self-reinforced (SR) devices (SR-PGA, SR-PLLA, and SR-PLA96 spiral stents) are acquired by special processing methods from polymer materials. As a result, the spiral stent has an expansion property of up to 70% of its original outer diameter, 50% of which may occur in 30 minutes. The stent may also have variable degradation properties in different parts of the device. The use of bioabsorbable devices in urology is novel. Today, SR-PGA spirals (Biofix) to be used for the prostatic urethra are commercially available but with restrictions. Their indications are the prevention of urinary retention after thermal therapy of prostatic hyperplasia, temporary treatment of urinary retention in patients waiting for surgery, and the early-phase resolution of bladder outlet obstruction in patients waiting for the effect of medical therapy. Stents can be also used to observe the effects of prostatic surgery on bladder function. The SR-PLLA and SR-PLA96 spiral stents are still under development for use in the anterior urethra, prostatic urethra, and ureters. Further experimental and controlled clinical studies are needed to find out the suitability of bioabsorbable devices in urology. Many efforts have been made to discover the best possible materials, models, coating materials, and additives of bioabsorbable stents in urology.
J Endourol 1997 Dec
PMID:Bioabsorbable and biodegradable stents in urology. 944 Aug 46

New cell culture techniques raise the possibility of creating cartilage in vitro with the help of tissue engineering. In this study, we compared two resorbable nonwoven cell scaffolds, a polyglycolic acid/poly-L-lactic acid (PGA/PLLA) (90/10) copolymer (Ethisorb) and pure PLLA (V 7-2), with different degradation characteristics in their aptitude for cartilage reconstruction. Chondrocytes were isolated enzymatically from human septal cartilage. The single cells were resuspended in agarose and transferred into the polymer scaffolds to create mechanical stability and retain the chondrocyte-specific phenotype. The cell-polymer constructs were then kept in perfusion culture for 1 week prior to subcutaneous transplantation into thymusaplastic nude mice. After 6, 12, and 24 weeks, the specimens were explanted and analyzed histochemically on the presence of collagen (azan staining), proteoglycans (Alcian blue staining), and calcification areas (von Kossa staining). Furthermore, different collagen types (collagen type I, which is found in most tissues, but not in hyaline cartilage matrix; and collagen type II, which is cartilage specific) were differentiated immunohistochemically by the indirect immunoperoxidase technique. Vascular ingrowth was investigated by a factor VIII antibody, which is a endothelial marker. Quantification of several matrix components was performed using the software Photoshop. Significant differences were found between both nonwoven structures concerning matrix synthesis and matrix quality as well as vascular ingrowth. Ethisorb, with a degradation time of approximately 3 weeks in vitro, showed no significant differences from normal human septal cartilage in the amount of collagen types I and II 24 weeks after transplantation. Thin fibrous tissue layers containing blood vessels encapsulated the transplants. V 7-2 constructs, which did not show strong signs of degradation even 24 weeks after transplantation, contained remarkably smaller amounts of cartilage-specific matrix components. At the same time, there was vascular ingrowth even in central parts of the transplants. In conclusion, polymer scaffolds with a short degradation time are suitable materials for the development of cartilage matrix products, while longer stability seems to inhibit matrix synthesis. Thus, in vitro engineering of human cartilage can result in a cartilage-like tissue when appropriate nonwovens are used. Therefore, this method could be the ideal cartilage replacement method without the risk of infection and with the possibility of reconstructing large defects with different configurations.
J Biomed Mater Res 1998 Dec 05
PMID:Cartilage reconstruction in head and neck surgery: comparison of resorbable polymer scaffolds for tissue engineering of human septal cartilage. 978 96

A procedure for surface hydrolysis of poly(glycolic acid) (PGA) meshes was developed to increase cell seeding density and improve attachment of vascular smooth muscle cells. Hydrolysis of PGA in 1N NaOH transformed ester groups on the surface of PGA fibers to carboxylic acid and hydroxyl groups. After hydrolysis, the polymer scaffold retained its original gross appearance and dimensions while the fiber diameter decreased. A plot of fiber diameter versus the hydrolysis time showed a linear relationship, with a rate of decrease in fiber diameter of 0.65 microm/min. The molecular weight and thermal properties of the polymer did not change significantly following surface hydrolysis. In cell seeding experiments, surface-hydrolyzed mesh was seeded with more than twice as many cells as unmodified PGA mesh. Vascular smooth muscle cells attached to the surface-hydrolyzed PGA mesh both as individual cells and as cell aggregates while only cell aggregates were observed on the unmodified mesh. Control experiments indicated that adsorption of serum proteins onto the surface-hydrolyzed PGA fibers was correlated with the increase in cell seeding density. These results demonstrate that optimization of biomaterial-cell interactions provides a strategy for increasing the initial cell seeding density for the engineering of tissues of high cell density.
J Biomed Mater Res 1998 Dec 05
PMID:Surface hydrolysis of poly(glycolic acid) meshes increases the seeding density of vascular smooth muscle cells. 978 5

The effect of the helical sense and the helical macrodipole moment of poly(glutamic acid) (PGA) amphiphiles on miscibility in their binary surface monolayers was examined by means of the surface pressure-area isotherm and spectroscopic measurements. Four types of PGA amphiphiles, having different chirality (l or d) and two long alkyl chains at the C- or N-terminus (1 or 2), were successfully prepared by polymerization of the corresponding NCAs. In acidic solutions, these amphiphiles were found to take right-handed or left-handed helical conformation, depending upon the chirality of the glutamic acid unit, and are dispersed in water molecularly without aggregation. On the other hand, the binary mixed monolayer of 1L and 1D provided a marked positive deviation from an ideal mixing curve, while that of the combination of 1L and 2L gave a much smaller negative deviation, suggesting that helical sense would play a more important role in monolayer miscibility. Copyright 1999 Academic Press.
J Colloid Interface Sci 1999 Dec 15
PMID:Effects of Helical Sense and Macrodipole on Helix Interaction in Poly(glutamic acid) Monolayers at the Air-Water Interface. 1060 53

The effect of polymer chemistry on adhesion, proliferation, and morphology of human articular cartilage (HAC) chondrocytes was evaluated on synthetic degradable polymer films and tissue culture polystyrene (TCPS) as a control. Two-dimensional surfaces of poly(glycolide) (PGA), poly(L-lactide) (L-PLA), poly(D,L-lactide) (D,L-PLA), 85:15 poly(D,L-lactide-co-glycolide) (D,L-PLGA), poly(epsilon-caprolactone) (PCL), 90:10 (D,L-lactide-co-caprolactone) (D,L-PLCL), 9:91 D,L-PLCL, 40:60 L-PLCL, 67:33 poly(glycolide-co-trimethylene carbonate) (PGTMC), and poly(dioxanone) (PDO) were made by spin-casting into uniform thin films. Adhesion kinetics were studied using TCPS and PCL films and revealed that the rate of chondrocyte adhesion began to level off after 6 h. Degree of HAC chondrocyte adhesion was studied on all the substrates after 8 h, and ranged from 47 to 145% of the attachment found on TCPS. The greatest number of chondrocytes attached to PGA and 67:33 PGTMC polymer films, and attachment to PCL and L-PLA films was statistically lower than that found on PGA (p < 0.05). There was no correlation between amount of chondrocyte attachment to the substrates and the substrates' water contact angle. Chondrocytes proliferated equally well on all the substrates resulting in equivalent cell numbers on all the substrates at both day 4 and day 7 of the culture. However, these total cell numbers were reached as a result of a 88- and 42-fold expansion on PDO and PLA, respectively, which was significantly higher than the 11-fold expansion found on TCPS (p < 0.05). The greater fold expansion of the cells on PDO and L-PLA films may be attributed to the availability of space for cells to grow, since their numbers at the start of culture were fewer following the 8 h attachment period. This suggests that regardless of initial seeding density on these degradable polymer substrates (i.e., if some minimum number of cells are able to attach), they will eventually populate the surfaces of all these polymers given sufficient space and time.
Biomaterials 1999 Dec
PMID:Human articular chondrocyte adhesion and proliferation on synthetic biodegradable polymer films. 1061 31

The use of high-performance liquid chromatography for the determination of folates is well documented. The methods used are based on reversed-phase chromatography with UV and/or fluorescence detection. In many instances it is difficult to reach the required detection limits and many of the methods lack specificity. High-performance liquid chromatography-mass spectrometry (LC-MS) has become a well established analytical tool in modern laboratories. It can offer superior specificity and often lower detection limits than conventional LC detection methods and thus is ideally suited to the analysis of folates. A system capable of separating the four main folates [folic acid (pteroylglutamic acid, PGA)], 5-methyltetrahydrofolic acid, terahydrofolic acid and 5- and/or 10-formyltetrahydrofolic acid [folinic acid (CHOTHF)] using LC-MS with negative ion electrospray has been developed. After optimisation, a system using a 12.5 cm x 3 mm, 3 microm Hypersil ODS column and a mobile phase of 2.5 mM acetic acid-acetonitrile (88:12, v/v) was developed which was capable of separating the four folates in under 10 min without the use of a gradient system. Extraction of the folates is by heat treatment and sample clean-up is by solid-phase extraction (C18). On column limits of confirmation are 0.6 ng for PGA and CHOTHF.
J Chromatogr A 1999 Dec 09
PMID:Analysis of some folate monoglutamates by high-performance liquid chromatography-mass spectrometry. I. 1063 Aug 71

Pepsin-solubilized elastin (PSE)-conjugated collagen film was prepared from a collagen matrix with PSE by drying it and crosslinking the constituents with water-soluble carbodiimide or microbial transglutaminase to improve the physical properties of the collagen film. The crosslinking reduced the solubility and improved the thermal stability, the thermal transition properties, and the elasticity of the control film in water. In particular, water-soluble carbodiimide strongly influenced these properties. The PSE-conjugated collagen film showed good permeation by water-soluble tasting substances such as oligosaccharides and amino acids, but poor permeation by polysaccharide, protein, and hydrophobic substances such as retinol and cholesterol.
Biosci Biotechnol Biochem 1999 Dec
PMID:Improvement of the physical properties of pepsin-solubilized elastin-collagen film by crosslinking. 1066 47


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>