Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UNIPROT:P00790 (PGA)
 2,475 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The aim of this study was to develop new biocompatible coatings for bone implants by the alternating deposition of oppositely charged polyelectrolytes. Polyelectrolyte films were built up with different terminating layers on which SaOS-2 osteoblast-like cells and human periodontal ligament (PDL) cells were grown. The terminating layer was made of one of the following polyelectrolytes: poly(ethylene imine) (PEI), poly(sodium 4-styrenesulfonate) (PSS), poly(allylamine hydrochloride) (PAH), poly(L-glutamic acid) (PGA), or poly(L-lysine) (PLL). Cell adherence, viability, stability of osteoblast phenotype, and inflammatory response were studied. Adherence and viability were good on all terminating layers except the PEI-terminating layer, which was cytotoxic. Maintenance of osteoblast phenotype marker expression was observed on PSS- and PGA-terminating films for both cell types, whereas downregulation, associated with the induction of Interleukin-8 (IL-8) secretion, was detected on PEI and PAH for both cell types and on PLL for PDL cells. These results suggested a good biocompatibility of PSS- and PGA-ending films for PDL cells and of PSS-, PGA-, and PLL-terminating films for SaOS-2 cells. As a result, polyelectrolyte multilayer films could emerge as new alternatives for implant coatings.
 ...
PMID:Viability, adhesion, and bone phenotype of osteoblast-like cells on polyelectrolyte multilayer films. 1194 25

Endothelial cell seeding constitutes an appreciated method to improve blood compatibility of small-diameter vascular grafts. In this study, we report the development of a simple innovative technique based on multilayered polyelectrolyte films as cell adhesive substrates. Polyelectrolyte multilayered films ending by poly(sodium-4-styrenesulfonate)/poly(allylamine hydrochloride) (PSS/PAH) or poly(L-glutamic acid)/poly(D-lysine) (PGA/PDL) could enhance cell adhesion by modification of the physico-chemical properties of the surface. The biological responses of human umbilical vein endothelial cells seeded on the polyelectrolyte multilayer films, on PDL or PAH monolayers, and on control surfaces, were evaluated in terms of initial attachment, growth, cellular metabolic activity, endothelial phenotype, and adhesion. The results showed that polyelectrolyte multilayers neither induce cytotoxic effects nor alter the phenotype of the endothelial cells. The polyelectrolyte multilayered films enhanced initial cell attachment as compared to the polyelectrolyte monolayer. Cell growth observed on the films was similar to that on TCPS. Among the different coating tested, the film ending by PSS/PAH exhibited an excellent cellular biocompatibility and appeared to be the most interesting surface in terms of cellular adhesion and growth. Such films could be used to cover hydrophobic (cell resistant) substrates in order to promote cell colonization, thereby constituting an excellent material for endothelial cell seeding.
 ...
PMID:Endothelial cells grown on thin polyelectrolyte mutlilayered films: an evaluation of a new versatile surface modification. 1280 81

We studied in vitro cell-substrate interaction of motoneurons with functionalized polylectrolyte films. Thin polylectrolyte films were built on glass by alternating polycations, poly(ethylene-imine) PEI, poly(L-lysine) PLL, or poly(allylamine hydrochloride) PAH, and polyanions, poly(sodium-4-styrenesulfonate) PSS or poly(L-glutamic acid) (PGA). These architectures were functionalized with Brain Derived Neurotrophic Factor (BDNF) or Semaphorin 3A (Sema3A). We used Optical Waveguide Lightmode Spectroscopy (OWLS) and Atomic Force Microscopy (AFM) to characterize the architectures. The viability of motoneurons was estimated by the acid phosphatase method, and morphometrical measures were performed to analyse the influence of different architectures on cell morphology. Motoneurons appeared to adhere and spread on all the architectures tested and preferentially on PSS ending films. The viability of motoneurons on polyelectrolyte multilayers was higher compared to polyelectrolyte monolayers. BDNF and Sema3A embedded in the films remained active and thereby create functionalized nanofilms.
 ...
PMID:Effect of functionalization of multilayered polyelectrolyte films on motoneuron growth. 1527 62

We show, in this paper that multivalent ferrocyanide anions can penetrate into exponentially growing (PGA/PAH)n multilayer films whatever the nature of the last deposited layer. These ions are not able to diffuse out of the film when it is brought in contact with a pure buffer solution. However, the contact of this film with a poly(allylamine) (PAH) or a poly(L-glutamic acid) (PGA) solution leads to the release of ferrocyanide ions from the multilayer. It is shown that the release of ferrocyanide anions, when the film is in contact with a PGA solution, is due to the diffusion of the PGA chains into the film so that an exchange between ferrocyanide ions and PGA chains takes place inside the film. On the other hand, PAH chains do not diffuse into PGA/PAH multilayers. When the film is then brought in contact with a PAH solution, the PAH chains from the solution are expected to strongly interact with the ferrocyanide ions and thus induce a diffusion mechanism of the multivalent anions out of the film, the film/solution interface playing the role of a sink for these ions. This work thus shows that interactions between multivalent ions and exponentially growing films are much more complex than expected at first sight and that polyelectrolyte multilayers must be seen as dynamic entities in which diffusion and exchange processes can take place.
 ...
PMID:Multivalent ion/polyelectrolyte exchange processes in exponentially growing multilayers. 1580 18

In a previous paper (Michel, M.; Vautier, D.; Voegel, J.-C.; Schaaf, P.; Ball, V. Langmuir 2004, 20, 4835), we showed that phospholipid vesicles can be incorporated into poly(glutamic-acid)/poly(allylamine) (PGA/PAH) multilayered polyelectrolyte films built by the alternated dipping of a surface in polyanion and polycation solutions. AFM imaging, quartz crystal microbalance, and ellipsometry suggested that the vesicles remain intact when adhering on the surface. In the present paper, we show that such films can also be realized by spraying both the polyelectrolyte solutions and the vesicles onto the surface. Using such vesicles filled with ferrocyanide ions, we prove by cyclic voltammetry that the sprayed vesicles remain intact when embedded in the multilayers. We show that multilayers containing two distinct layers of intact vesicles separated by several polyanion/polycation bilayers can also be constructed. Polyelectrolyte multilayers containing layers of phospholipid vesicles could act as reservoirs for drug or other biologically active molecules in controlled release bioactive coatings.
 ...
PMID:Layer by layer self-assembled polyelectrolyte multilayers with embedded phospholipid vesicles obtained by spraying: integrity of the vesicles. 1608 92

The development of chemical reactions in nanospaces is of paramount importance for the development of active nanodevices, particularly in nanofluidics. It has been shown in a previous paper that phospholipid vesicles can be incorporated without spontaneous bilayer rupture into poly-L-glutamic acid/poly(allylamine) (PGA/PAH) multilayered polyelectrolyte films. The aim of the present study was to use such a system as an "embedded submicronic reactor" able to trigger precipitation of calcium phosphates within closed spaces through an enzymatic reaction, the enzyme also being encapsulated in the vesicle interior. To this aim, large unilamellar vesicles (LUVs) were produced containing calcium ions as active ions in the mineralization process, spermine as an activator of crystal growth, and alkaline phosphatase as a catalyst to convert phosphate esters into phosphates. After stabilization by adding a layer of poly-(D-lysine), these vesicles were embedded in a (PGA-PAH)n film. A paranitrophenyl phosphate containing solution was then put in contact with this film. It is shown by means of infrared spectroscopy in the attenuated total reflection mode that, consecutively to this contact, calcium phosphates are growing inside the embedded vesicles. By using scanning near-field fluorescence microscopy, it is demonstrated that the alkaline phosphatase enzymes are most probably located inside the vesicles after their embedding. In addition, atomic force microscopy was used to show, after chemical removal of the organic top layer of the film, that the inorganic platelets produced after the precipitation reaction are localized in volumes of similar size and shape as that of the vesicles into which the phosphate ester hydrolysis and subsequent precipitation reaction did occur.
 ...
PMID:Layer-by-layer self-assembled polyelectrolyte multilayers with embedded liposomes: immobilized submicronic reactors for mineralization. 1648 29

Alternated deposition of polyanions and polycations on a charged solid substrate leads to the buildup of polyelectrolyte multilayer (PEM) films. Two types of PEM films were reported in the literature: films whose thickness increases linearly and films whose thickness increases exponentially with the number of deposition steps. However, it was recently found that, for exponentially growing films, the exponential increase of the film thickness takes place only during the initially deposited pairs of layers and is then followed by a linear increase. In this study, we investigate the growth process of hyaluronic acid/poly(L-lysine) (HA/PLL) and poly(L-glutamic acid)/poly(allylamine) (PGA/PAH) films, two films whose growth is initially exponential, when the growth process enters the linear regime. We focus, in particular, on the influence of the molecular weight (Mw) of the polyelectrolytes. For both systems, we find that the film thickness increment per polyanion/polycation deposition step in the linear growth regime is fairly independent of the molecular weights of the polyelectrolytes. We also find that when the (HA/PLL)n films are constructed with low molecular weight PLL, these chains can diffuse into the entire film during each buildup cycle, even for very thick films, whereas the PLL diffusion of high molecular weight chains is restricted to the upper part of the film. Our results lead to refinement of the buildup mechanism model, introduced previously for the exponentially growing films, which is based on the existence of three zones over the entire film thickness. The mechanism no longer needs all the "in" and "out" diffusing polyanions or polycations to be involved in the buildup process to explain the linear growth regime but merely relies on the interaction between the polyelectrolytes with an upper zone of the film. This zone is constituted of polyanion/polycation complexes which are "loosely bound" and rich in the polyelectrolyte deposited during the former deposition step.
 ...
PMID:Influence of the polyelectrolyte molecular weight on exponentially growing multilayer films in the linear regime. 1727 72

Layer-by-layer (LBL) polyelectrolyte films offer extensive potentials to enhance surface properties of vascular biomaterials. From the time of implantation, PET prostheses are continuously subjected to multiple mechanical stresses such as important distorsions and blood pressure. In this study, three LBL films, namely (1) poly(sodium 4-styrenesulfonate)/poly(allylamine hydrochloride), (2) poly(L-lysine)/hyaluronan, and (3) poly(L-lysine)/poly(L-glutamic acid) were built on to isolated PET filaments, thread, and vascular prostheses. The three LBL films uniformly covered the surface of the PET samples with rough, totally smooth, and "wrinkled" appearances respectively for (PAH/PSS)(24), (PLL/HA)(24), and (PLL/PGA)(24) systems. We then assessed the behavior of these LBL films, in an aqueous environment [by environmental scanning electronic microscopy (ESEM)], when subjected to unidirectional longitudinal stretches. We found that stretching induces ruptures in the multilayer films on isolated filaments for longitudinal stretches of 14% for (PSS/PAH)(24), 13% for (PLL/PGA)(24), and 30% for (PLL/HA)(24) films. On threads, the rupture limit is enhanced to be respectively 26, 20, and 28%. Most interestingly, we found that on vascular prosthesis no rupture is visible in any of the three multilayers types, even for elongations of 200% (200% undergone by the PET prostheses is representative of those encountered during graft deployment) which by far exceeds elongations observed under physiological conditions (10-20%, blood pressure). In term of mechanical behaviors, these preliminary data constitute a first step toward the possible use of LBL film to coat and functionalize vascular prosthesis.
 ...
PMID:Characterization of polyelectrolyte multilayer films on polyethylene terephtalate vascular prostheses under mechanical stretching. 1761 82

Multilayer nanofilms, formed by the layer-by-layer (LbL) adsorption of positively and negatively charged polyelectrolytes, are promising substrates for tissue engineering. We investigate here the attachment and function of hepatic cells on multilayer films in terms of film composition, terminal layer, rigidity, charge, and presence of biofunctional species. Human hepatocellular carcinoma (HepG2) cells, adult rat hepatocytes (ARH), and human fetal hepatoblasts (HFHb) are studied on films composed of the polysaccharides chitosan (CHI) and alginate (ALG), the polypeptides poly(l-lysine) (PLL) and poly(l-glutamic acid) (PGA), and the synthetic polymers poly(allylamine hydrochloride) (PAH) and poly(styrene sulfonate) (PSS). The influence of chemical cross-linking following LbL assembly is also investigated. We find HepG2 to reach confluence after 7 days of culture on only 2 of 18 candidate multilayer systems: (PAH-PSS)(n) (i.e. nPAH-PSS bilayers) and cross-linked (PLL-ALG)(n)-PLL. Cross-linked PLL-ALG and PLL-PGA films support attachment and function of ARH, independently of the terminal layer, provided collagen is adsorbed to the top of the film. (PAH-PSS)(n), cross-linked (PLL-ALG)(n), and cross-linked (PLL-PGA)(n)-PLL films all support attachment, layer confluence, and function of HFHb, with the latter film promoting the greatest level of function at 8 days. Overall, film composition, terminal layer, and rigidity are key variables in promoting attachment and function of hepatic cells, while film charge and biofunctionality are somewhat less important. These studies reveal optimal candidate multilayer biomaterials for human liver tissue engineering applications.
 ...
PMID:Multilayer nanofilms as substrates for hepatocellular applications. 1865 30

We developed a new platform at the interface of polyelectrolyte multilayers (PEMs) and electroactive polymers (EAPs) by combining the easy buildup of PEM thin films and the deformation characteristics of the EAPs. The PEM films were made of poly(L-glutamic acid) (PGA) and poly(allylamine hydrochloride) (PAH). After [Fe(CN)6]4- ions (FCIV) were added, cyclic voltammetry (CV) was performed, resulting in a reversible expansion and contraction of the film. The shape change as well as the film buildup prior to the cycling were monitored in situ using the electrochemical quartz crystal microbalance with dissipation monitoring (EC-QCM-D). Electrochemical atomic force microscopy (EC-AFM) images confirmed the rapid shape deformation. The process takes place in an aqueous environment under mild conditions (maximum potential of 600 mV and no pH change), which makes it a promising tool for biomedical applications. In addition, the electrochemically active films are produced using the layer-by-layer (LbL) method that is already established in biotechnology and biomaterials science; therefore, the presented approach can be readily adapted in these areas, bringing about a new possibility for the nanoscale dynamic control of coating thickness in various applications.
 ...
PMID:Swelling and contraction of ferrocyanide-containing polyelectrolyte multilayers upon application of an electric potential. 1897 14


1 2 Next >>