Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UNIPROT:P00750 (PLA)
 16,800 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Hypoxia was reported to induce a decrease in phosphatidylcholine-hydrolyzing phospholipase activity (PC-PLA) in cultured rat cardiomyocytes. This work was intended to compare the influence of the presence of either eicosapentaenoic acid (EPA) or docosahexaenoic acid (DHA) in the phospholipids on the PC-PLA activity in normoxic and hypoxic conditions. The enrichment of the medium with EPA or DHA resulted in cell phospholipids containing about 2% or 22% DHA, respectively. These cells were then submitted for 3.5 h to either normoxia or hypoxia and the PC-PLA activities were assayed using [1-14C] dioleoyl-PC (pH 8.4 for PC-PLA2 and 4.9 for PC-PLA1). The results show that both enzymic activities are significantly higher in DHA-rich cardiomyocytes. Hypoxia induced a significant decrease in PC-PLA2 (about 25%) which was not statistically different between the two groups of cells. The hypoxia-induced decrease in PC-PLA1 was not found significant. In conclusion, the nature of the long chain n-3 polyunsaturated fatty acids in the phospholipids appears to contribute to the regulation of PC-PLA activity but not to influence its decrease during hypoxia.
 ...
PMID:Eicosapentaenoic and docosahexaenoic acids in cultured rat ventricular myocytes and hypoxia-induced alterations of phospholipase-A activity. 148 Jan 56

A monoclonal antibody, LK-4, has been developed which distinguishes platelet PLA1/PLA1, PLA1/PLA2 and PLA2/PLA2 genotypes on platelet glycoprotein GPIIIa of Triton-solubilized platelet extracts. An ELISA assay has been developed which traps GPIIIa with Concanavalin A, enriching the platelet extract for the PLA antigens. A second monoclonal antibody, DEK-10, which reacts equally with GPIIIa of PLA1/PLA1 and PLA2/PLA2 platelet extracts is employed as an internal standard to correct for individual differences in GPIIIa content, GPIIIa extracted by Triton X-100 and GPIIIa trapped with Concanavalin A. This ELISA assay clearly differentiated 11 different PLA1/PLA1 subjects from eight PLA2/PLA2 women with a history of neonatal alloimmune thrombocytopenia as well as six unrelated obligate heterozygotes and should be useful in evaluating the PLA genotype of pregnant women and their families.
 ...
PMID:Development of a monoclonal antibody capable of differentiating platelet PLA1/PLA1, PLA1/PLA2 and PLA2/PLA2 genotypes. 152 Jun 9

The immunogenic potential of tetanus toxoid (TT) was compared when either adsorbed to aluminium hydroxide (TT-alum) or entrapped in microparticles consisting of poly(D,L-lactic-co-glycolic acid) (PLA:PGA, 55:45) derived polymers. Furthermore, the effect of administering the microparticles in an aqueous buffer or water-in-oil emulsion on the TT immunogenicity was also investigated. When mice were immunized with the different formulations, similar levels of anti-TT antibodies were observed during the primary IgG response. The choice of the carrier seemed to play an important role for both the level and maintenance of the secondary IgG response, attained as a consequence of a booster immunization with TT-alum. The strongest secondary antibody response was obtained by priming with TT-containing microparticles, resuspended in water-in-oil emulsions. As expected, incomplete Freund's adjuvant (IFA) proved to be a more potent adjuvant than peanut oil, whereas resuspension of the microparticles in aqueous solution induced a relatively less efficient antibody response. Overall, microencapsulated TT primed the mice more effectively, since the secondary antibody response was higher and persisted longer compared with TT-alum priming. These results indicate that in addition to TT maintaining its antigenicity after microencapsulation, the microparticles also potentiate its immunogenic properties. This approach should prove very useful for designing more effective vaccines.
 ...
PMID:Parameters affecting the immunogenicity of microencapsulated tetanus toxoid. 152 81

Tumor necrosis factor-alpha (TNF alpha) has been proposed as a mediator of endotoxin-induced lung injury. When given to sheep, TNF alpha mimics endotoxin (LPS) causing hypoxemia, pulmonary hypertension, leukopenia, reduced dynamic compliance (Cdyn), increased resistance to airflow (RL), exudation of lung lymph, and enhanced airway reactivity. TNF alpha also induces rapid release of thromboxane A2 (TxA2), prostaglandin E2 (PGE2), and prostacyclin (PGI2). We hypothesized that the inflammatory effects of TNF alpha are due at least in part to cyclooxygenase products, and therefore cyclooxygenase inhibition would have similar effects on TNF alpha-induced lung injury as has previously been demonstrated for LPS-induced lung damage. Using awake sheep with chronic lung lymph fistulas, we measured Cdyn, RL, and FRC using a whole-body plethysmograph. Pulmonary artery (Ppa), left atrial (PLA), and systemic arterial (Psa) pressures were recorded continuously. Arterial blood gases (for calculating AaPO2), leukocyte counts, and lymph samples (for prostanoid levels) were collected every 30 min. Eleven animals underwent paired random-order experiments receiving ibuprofen (14 mg/kg) 1 h before human recombinant TNF alpha (10 micrograms/kg), or an identical dose of TNF alpha alone. Within 15 min of initiating TNF alpha, Ppa doubled and remained elevated for 4 h. Ibuprofen prevented the early rise in Ppa after TNF alpha. In the group receiving TNF alpha alone, increases in Ppa were accompanied by a 60% decline in leukocyte count and a 50% increase in AaPo2 within 30 min. Ibuprofen prevented increases in AaPo2, but it had no effect on leukopenia or late increases in lymph flow.(ABSTRACT TRUNCATED AT 250 WORDS)
 ...
PMID:The role of cyclooxygenase products in lung injury induced by tumor necrosis factor in sheep. 154 45

Pseudolatexes of the biodegradable polyesters poly(D,L-lactide) (PLA) and poly(epsilon-caprolactone) (PCL) have been developed as potential aqueous coatings for sustained release. Since PLA and PCL are known to hydrolyze, the influence of the surfactant system, temperature, pH, and particle size on the chemical stability of the polymers as aqueous colloidal dispersions was investigated. Pseudolatexes of PLA and PCL formulated with a nonionic surfactant system were the most stable. When these dispersions were stored in unbuffered media for 350 days at 5 degrees C, only small changes in the weight-average molecular weights (Mw) of the polymers were observed. At 37 degrees C there was rapid degradation of both polymers in the dispersions. Arrhenius plots for the degradation of PLA and PCL resulted in a linear relationship for PCL. The nonlinear relationship for PLA was attributed to the polymer being in two different physical states within the 5 to 37 degrees C range which was used for the Arrhenius plots. PCL was in the rubbery state at all temperatures studied. Storage of the pseudolatexes in pH 1.65 buffer at 37 degrees C catalyzed the rates of degradation of both PLA and PCL. However, refrigeration of the pseudolatexes stabilized the polymers even at pH 1.65 for up to 4 months. Particle size had an insignificant effect on PLA and PCL stability in pseudolatexes prepared with either a nonionic or an anionic surfactant system.
 ...
PMID:Biodegradable pseudolatexes: the chemical stability of poly(D,L-lactide) and poly(epsilon-caprolactone) nanoparticles in aqueous media. 155 42

The solvent evaporation technique was employed to prepare poly(L-lactic acid) (PLA) microspheres with 165Ho acetylacetonate (Ho-AcAc). Particle size, percentage Ho-165, percent residual solvent, and retentive ability of the spheres were found to be strongly affected by preparatory conditions. Differential scanning calorimetry (DSC) thermograms suggested that the Ho-AcAc existed in the PLA matrix as a molecular dispersion. High neutron flux irradiations of the PLA spheres in a nuclear reactor produced Ho-166, a therapeutic radionuclide that emits high-energy negatrons (Emax = 1.84 MeV; half-life = 26.9 hr). The gamma radiation dose (53-75 Mrad) from the core of the reactor provided an overkill of all bioburdens in the PLA spheres. Gel permeation chromatography (GPC) analysis showed that these irradiations caused a reduction in PLA molecular weight. Infrared spectra, 13C NMR spectra, 1H NMR spectra, and DSC thermograms further confirmed the presence of lower molecular weight PLA but proved the overall maintenance of PLA structure.
 ...
PMID:Poly(L-lactic acid) microspheres containing neutron-activatable holmium-165: a study of the physical characteristics of microspheres before and after irradiation in a nuclear reactor. 158 1

Five molecular weight grades of poly(DL-lactic acid) were characterized using gel permeation chromatography, differential scanning calorimetry, and viscometry to determine the effect of molecular weight on the glass transition temperature and the intrinsic viscosity. In addition, dynamic mechanical thermal analysis was used to assess the dynamic storage modulus and the damping factor of the polymer samples by detecting motional and structural transitions over a wide temperature range. Significant relationships were found between the molecular weight and these polymer properties. The five grades of poly(DL-lactic acid) were also incorporated as binders into matrix tablet formulations containing the model drug theophylline and microcrystalline cellulose. Dissolution studies showed significant correlations between the properties of the polymer and the matrix release profiles of the tablets. The release of theophylline slowed down progressively as the polymer molecular weight increased. The differences in release became less significant and reached a limiting asymptotic value as the molecular weight increased to 138,000. Further, tablet index testing was utilized to determine the compaction properties of the polymer granulations. Although there was no correlation with the molecular weight of PLA, brittle fracture index testing indicated very low brittleness for all granulations tested. However, bonding index determinations correlated very well with both the physical-mechanical properties of the polymer and drug release profiles.
 ...
PMID:The influence of polymer glass transition temperature and molecular weight on drug release from tablets containing poly(DL-lactic acid). 158 5

Protein release from degradable polymer matrices, composed of poly(L-lactic acid) and its blends with Pluronic surfactant, was investigated with and without the aqueous coating of an adsorptive water-soluble polymer, polyethyleneimine (PEI). PEI is a highly branched cationic polymer containing primary, secondary, and tertiary amino groups in its backbone. The treatment of PEI for PLA/Pluronic blend films exhibited a remarkable decrease in the "burst" release of protein at an initial stage and a significant extension in the protein release period. Protein release profiles could be controlled by varying PEI treatment time and its concentration. Our results suggest that PEI diffuses into the polymer matrices and crosslinks protein molecules by ionic interactions. Such a PEI-protein network near the surface region of matrix may act as a diffusional barrier for further release of protein molecules.
 ...
PMID:Controlled protein release from polyethyleneimine-coated poly(L-lactic acid)/pluronic blend matrices. 158 7

Multi-phase microspheres of poly(D,L-lactic acid) (PLA) or poly(D,L-lactic-co-glycolic acid) (PLGA) containing a water-in-oil (W/O) emulsion were prepared by a multiple emulsion solvent evaporation technique. Acetonitrile was used as the solvent for the polymers and light mineral oil as the dispersion medium for the encapsulation procedure. Process and formulation parameters to optimize the microencapsulation of a W/O emulsion containing water-soluble drugs were investigated. Drug loading efficiencies of 80-100 per cent were obtained under specific preparative conditions. The drug loading efficiency in the microspheres was dependent upon the ratio of the W/O emulsion to polymer and the concentration of surfactant in the mineral oil. Compared to conventional microspheres, in which fine drug particles are homogeneously dispersed in the polymer beads, the multi-phase microspheres permit the higher encapsulation efficiency of water-soluble drugs and eliminate partitioning into the polymer-acetonitrile phase which results in low encapsulation efficiency with conventional solvent evaporation techniques.
 ...
PMID:Preparation of multi-phase microspheres of poly(D,L-lactic acid) and poly(D,L-lactic-co-glycolic acid) containing a W/O emulsion by a multiple emulsion solvent evaporation technique. 159 4

Endothelin-1 (ET-1) is a pulmonary vasodilator in the unventilated fetal lamb. The site and mechanism of this vasodilator response were investigated in isolated blood-perfused lungs from nine fetal lambs delivered at 127-140 days gestation. The vascular occlusion technique was used to partition the total pulmonary pressure gradient into pressure gradients across large and small arteries (delta PLA and delta PSA, respectively) and veins (delta PV). Injection of ET-1 (74 ng/kg) into the pulmonary artery significantly decreased delta PLA from 12.4 +/- 2.1 to 5.2 +/- 1.1 mmHg and delta PSA from 49.2 +/- 2.7 to 31.3 +/- 4.9 mmHg. The pressure measured by double occlusion, an estimate of pulmonary capillary pressure, was not altered by ET-1 (15.5 +/- 1.0 vs. 14.8 +/- 1.0 mmHg), indicating that ET-1 had no effect on pulmonary veins. Addition of N omega-nitro-L-arginine (estimated perfusate concentration 2-6 mM), an analogue of L-arginine that inhibits the production of endothelium-derived relaxing factor (EDRF), significantly attenuated the dilator responses to acetylcholine (10 micrograms) and ET-1 (74 ng/kg) by 35 and 56%, respectively. These results in unventilated fetal lungs indicate that 1) ET-1 dilates both large and small pulmonary arteries with no effect on pulmonary veins, and 2) this effect is mediated in part through the action of the EDRF pathway.
 ...
PMID:Endothelin-1-induced pulmonary arterial dilation is reduced by N omega-nitro-L-arginine in fetal lambs. 160 79


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>