Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UNIPROT:P00750 (PLA)
 16,800 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Macrophages were obtained from seven-day-old bone marrow liquid cultures to which a colony-stimulating factor from L-cell-conditioned medium had been added. It was found that the yield of macrophages from the bone marrow liquid culture was dependent on the type and brand of culture dishes. Highest yields were obtained in teflon membrane bag cultures. The cumulative yield after serial passage of macrophages was 700-fold of the cell input after two months. After mechanical detachment from plastic culture dishes, the survival rate of cells was related to the brand of the plastic dish. Viability also varied greatly after pretreatment of cells with scandicain (28%), proteinase K (78%), or pronase (99%). After mechanical detachment of macrophages or pretreatment with scandicain, adherence to plastic, latex phagocytosis and chemotaxis was not or only slightly impaired, whereas the same functions after protease treatment were greatly reduced or even abolished and were only recovered after another culture period. Scandicain, proteinase K, and pronase treatment was mitogenic to macrophages in contrast to mechanical detachment. Pronase treatment also induced release of plasminogen activator activity. The results demonstrate that macrophages respond extremely sensitive to environmental conditions and to various insults by changing their functional state.
 ...
PMID:Influence of various detachment procedures on the functional state of cultured murine macrophages. 679 4

Nonblended poly(L-lactide) (PLLA) films having different molecular weights and nonblended poly(lactide) (PLA) films, enantiomeric blend films from PLLA and poly(D-lactide) (PDLA), and diastereoisomeric blend films of poly(DL-lactide) (PDLLA) with either PLLA or PDLA, having different L-lactide (LLA) contents (X(LLA)s) in the range of 0-0.99, were amorphous made by melt-quenching. The effects of molecular weight, X(LLA), and average L- and D-lactyl unit sequence length (l(L) and l(D), respectively) on the enzymatic hydrolysis of the films were investigated in the presence of proteinase K. The enzymatic hydrolysis rate (R(EH)) of PLLA estimated by gravimetry increased monotonically with the inverse of number-average molecular weight (M(n)). The extrapolation of R(EH) of PLLA to M(n)(-1) = 0, where no exo-chain-scission takes place, gave a positive R(EH) value (1.75 microg/(mm(2).h)), meaning that the enzymatic hydrolysis of PLLA proceeds via both endo- and exo-chain-scission. The R(EH) of the nonblended films as well as the enantiomeric and diastereoisomeric blend films decreased monotonically with the decease in X(LLA) and finally became zero for X(LLA) below 0.3. The R(EH) values of the blend films of PLLA and PDLLA with PDLA (l(D) = infinity) were lower than expected, while the R(EH) values of the blend films of PLLA with PDLLA (l(D) = 4) agreed completely with the expected values. These results reveal that the nonblended PLA films are enzymatically hydrolyzable when X(LLA) and l(L) are higher than 0.3 and 3, respectively, and l(D) is lower than 10 and that the presence of long D-lactyl unit sequences (l(D) > 4) as in PDLA hinders the enzymatic hydrolysis of long L-lactyl unit sequences even when long D- and L-lactyl unit sequences are present in the different molecules.
 ...
PMID:Enzymatic hydrolysis of poly(lactide)s: effects of molecular weight, L-lactide content, and enantiomeric and diastereoisomeric polymer blending. 1174 26

In order to discover novel invertebrate cytokines from the budding tunicate, Polyandrocarpa misakiensis, we treated the water-insoluble fraction of tunicate homogenates with trypsin. The extracts showed remarkable activities to promote the growth and motility of tunicate cells. The activities were heat-stable and proteinase K-resistant. After anion exchange chromatography, the activities were eluted with detergents such as 0.1% deoxycholic acid. The Fourier transform infrared spectrum indicated large amounts of fatty acids and phospholipids instead of polypeptides in the extracts. Consistently, the activities were extractable with organic solvents such as chloroform. Long chains of n-3 polyunsaturated free fatty acids (FFA), phosphatidylinositol (PI), phosphatidylcholine (PC), phosphatidylethanolamine (PE) and phosphatidylserine (PS) were the major components in the lipid-soluble fraction. A cDNA for FFA-releasing enzyme phospholipase A(2) (PLA(2)) was cloned. The expression of this gene could be seen in epidermal cells during budding. The recombinant protein, as in the case of the authentic PLA2, preferred PC and PE as substrates, followed by PS and PI. The resultant FFAs only promoted cell growth, while the remaining lysophospholipids stimulated cell motility. The former contained unsaturated fatty acids (C18:1, C20:5, and C22:6) while the latter did not, suggesting that unsaturated fatty acids are responsible for mitogenic activity in tunicate cells. These results show for the first time that phospholipids and their derivatives are bio-mediators promoting cell growth and cell motility in invertebrates.
 ...
PMID:Phospholipids and their derivatives as mitogen and motogen of budding tunicates. 1499 11

Physical properties associated with molecular mobility on the surface of thin films with 300 nm thickness for poly(lactide)s (PLAs) were studied under vacuum conditions as well as under aqueous conditions by using friction force mode atomic force microscopy (AFM). Two types of PLAs were applied for the experimental samples as uncrystallizable PLA (uc-PLA) and crystallizable PLA (c-PLA). The friction force on the surface of thin films was measured as a function of temperature to assess the surface molecular mobility both under vacuum and under aqueous conditions. A lower glass-transition temperature of the uc-PLA surface in water was detected than that under vacuum conditions. In the case of the c-PLA thin film, change in friction force was detected at a lower temperature under aqueous conditions than in vacuo. A morphological change was observed in the c-PLA thin film during heating process from room temperature to 100 degrees C by temperature-controlled AFM. The surface of the c-PLA thin film became rough due to the cold crystallization, and the crystallization of c-PLA molecules in water took place at a lower temperature than in vacuo. These friction force measurements and AFM observations suggest that molecular motion on the surface of the both uc- and c-PLA thin films is enhanced in the presence of water molecules. In addition, in situ AFM observation of the enzymatic degradation process for the c-PLA thin film crystallized at 160 degrees C was carried out in buffer solution containing proteinase K at room temperature. The amorphous region around the hexagonal crystal was eroded within 15 min. It has been suggested that the adsorption of water molecules on the PLA film surface enhances the surface molecular mobility of the glassy amorphous region of PLA and induces the enzymatic hydrolysis by proteinase K.
 ...
PMID:Effect of water on the surface molecular mobility of poly(lactide) thin films: an atomic force microscopy study. 1524 29

The biodegradation of poly(L-lactide) (PLA) is reviewed. The important role of actinomycetes in PLA degradation is emphasized. These PLA-degrading actinomycetes belong phylogenetically to the Pseudonocardiaceae family and related genera, including Amycolatopsis, Lentzea, Streptoalloteichus, Kibdelosporangium and Saccharothrix. A PLA-degrading enzyme purified from an isolated Amycolatopsis strain-41 has substrate specificity on PLA higher than proteinase K. The application of these strains and their enzymes can be effectively used for biological treatment of plastic wastes containing PLA.
 ...
PMID:Biodegradation of poly(L-lactide). 1527 45

Degradable copolymers were synthesized by ring opening polymerization of lactide in the presence of poly(ethylene glycol) (PEG), using CaH2 as a biocompatible initiator. The resulting PLA/PEO/PLA triblock copolymers were dissolved in a biocompatible solvent, namely tetraglycol. Physically crosslinked hydrogels were then prepared by introducing small amounts of water into the thus obtained solutions. Hydrolytic degradation of the highly swollen hydrogels was realized in 0.13 M pH=7.4 phosphate buffer, while the enzymatic degradation was carried out in 0.05 M pH=8.6 Tris buffer containing a PLA-degrading enzyme, proteinase K. In both cases, degradation was initially very fast with dramatic weight loss. The LA/EO ratio of the remaining material increased rapidly, in agreement with the release of PEO-rich segments. In a second phase, the degradation rate slowed down. The presence of proteinase K strongly accelerated the degradation rate of the hydrogels, indicating that the enzyme was able to penetrate inside and attack the PLA domains which constituted nanometric nodes in the gel network.
 ...
PMID:Hydrolytic and enzymatic degradations of physically crosslinked hydrogels prepared from PLA/PEO/PLA triblock copolymers. 1534 10

The substrate specificity of alpha-chymotrypsin and other serine proteases, trypsin, elastase, proteinase K and subtilisin, towards hydrolysis of various polyesters was examined using poly(L-lactide) (PLA), poly(beta-hydroxybutyrate) (PHB), poly(ethylene succinate) (PES), poly(ethylene adipate) (PEA), poly(butylene succinate) (PBS), poly(butylene succinate-co-adipate) (PBS/A), poly[oligo(tetramethylene succinate)-co-(tetramethylane carbonate)] (PBS/C), and poly(epsilon-caprolactone) (PCL). alpha-Chymotrypsin could degrade PLA and PEA with a lower activity on PBS/A. Proteinase K and subtilisin degraded almost all substrates other than PHB. Trypsin and elastase had similar substrate specificities to alpha-chymotrypsin.
 ...
PMID:Hydrolysis of polyesters by serine proteases. 1592 50

A novel biodegradable amphiphilic triblock copolymer bearing pendant carboxyl groups PLGG-PEG-PLGG was successfully prepared by ring-opening copolymerization of l-lactide (LA) with (3s)-benzoxylcarbonylethyl-morpholine-2, 5-dione (BEMD) in the presence of dihydroxyl poly(ethylene glycol) (PEG) as a macroinitiator in bulk at 130 degrees C using SnOct(2) as catalyst and by subsequent catalytic hydrogenation. The copolymer could form micelles in aqueous solution with the cmc dependent on the composition of the copolymer. The micelles exhibited a homogeneous spherical morphology and a unimodal size distribution. Their degradation rate in the presence of proteinase K was faster than that of PLA, and they showed a low degree of cytotoxicity to the articular cartilage cells. This biodegradable amphiphilic block copolymer with pendant carboxyl groups is capable of further modification and is expected to facilitate a variety of potential biomedical applications, such as drug carriers, tissue engineering, etc.
 ...
PMID:Synthesis and characterization of biodegradable amphiphilic triblock copolymers containing L-glutamic acid units. 1600 33

The Langmuir film balance technique was used to determine the hydrolytic kinetics of monolayers of the stereocomplex formed from mixtures of enantiomeric polylactides, poly(L-lactide) (L-PLA) and poly(D-lactide) (D-PLA), spread at the air-water interface. The present study investigated parameters such as degradation medium, mixture composition, and time on the relative degradation rate. The pi-A isotherms of monolayers of the mixtures provide clear evidence for the presence of a stereocomplex; the isotherms of monolayers of individual polyenantiomer show a transition at about 8.5 mN/m, whereas the transition of monolayers containing a stereocomplex formed from the equimolar mixture shifted to higher surface pressure, about 11 mN/ m. The rate of hydrolysis was recorded by a change in occupied area when the monolayer is maintained at a constant surface pressure. The hydrolysis of the mixture monolayers under basic conditions was slower than that of individual polyenantiomer monolayers, depending on the composition or the degree of complexation. In the presence of proteinase K, the enzymatic hydrolysis rate of mixture monolayers with >50 mol % l-PLA was much slower than that of the single-component L-PLA monolayer. The monolayers formed from mixtures with < or =50 mol % L-PLA did not show any change of occupied areas. This result is explained by the inactivity of D-PLA and stereocomplexed chains to the enzyme. From both results, it can be concluded that the retardation of the hydrolysis of mixture monolayers is mainly due to a strong interaction between D- and L-lactide unit sequences, which prevents the penetration of water or enzyme into the bulk.
 ...
PMID:Hydrolytic behavior of enantiomeric poly(lactide) mixed monolayer films at the air/water interface: stereocomplexation effects. 1628 88

Poly(lactide) (PLA) has been developed and made commercially available in recent years. One of the major tasks to be taken before the widespread application of PLA is the fundamental understanding of its biodegradation mechanisms. This paper provides a short overview on the biodegradability and biodegradation of PLA. Emphasis is focused mainly on microbial and enzymatic degradation. Most of the PLA-degrading microorganisms phylogenetically belong to the family of Pseudonocardiaceae and related genera such as Amycolatopsis, Lentzea, Kibdelosporangium, Streptoalloteichus, and Saccharothrix. Several proteinous materials such as silk fibroin, elastin, gelatin, and some peptides and amino acids were found to stimulate the production of enzymes from PLA-degrading microorganisms. In addition to proteinase K from Tritirachium album, subtilisin, a microbial serine protease and some mammalian serine proteases such as alpha-chymotrypsin, trypsin, and elastase could also degrade PLA.
 ...
PMID:Biodegradability and biodegradation of poly(lactide). 1682 51


1 2 3 Next >>