Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UNIPROT:P00750 (PLA)
 16,800 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The tissue engineering area henceforth calls more and more for bioabsorbable substrata made of biopolymers (collagen, laminin...) or polymers (PLA, PLGA, PGA...) to realize the three-dimensional culture of tissue equivalents. The poly (beta-hydroxybutyrate-beta-hydroxyvalerate), a biopolymer considered as being biodegradable and biocompatible, has been recently introduced for orthopaedic biomaterials and regeneration purposes. In our study, a PHB/9% HV polymer was transformed into 3D foams, then applied to the culture 3D of ovine chondrocytes (fibrous rings & growth plates) and osteoblasts (periostum). Sponges made of bovine type I collagen were used as references. Orthopaedic cells were isolated, prepared and sown by simple injection to the geometrical center of the substrata, then incubated from 0 to 35 days by changing the culture medium all 4 days. Maximal densities were reached after 21 days: 18-24.10(6) cells/g for the chondrocytes, 8-10.10(6) cells/g for the osteoblasts. The cellular proliferation was more marked, with highest cell densities, for the collagen sponges. Laser confocal microscopy shows that the cellular diffusion take place throughout the entire volume of the porous artificial substrata. Future studies will allow to apply the porous bioabsorbable substrata to high-density cell cultures, to the tissue engineering and regeneration, for example for orthopaedic tissues: cartilage, fibrocartilage and bone.
 ...
PMID:[Bio-absorbable synthetic polyesters and tissue regeneration. A study of three-dimensional proliferation of ovine chondrocytes and osteoblasts]. 903 39

The aerosol solvent extraction system (ASES) is a method based on solvent extraction using supercritical carbon dioxide for the preparation of microspheres. The ASES technology seems to be strongly affected by physico-chemical properties of biodegradable polymers, leading to incomplete or unsuccessful microsphere formation. The number of suitable polymers for ASES, such as poly(L-lactide) (L-PLA) and poly(beta-hydroxy-butyric acid) (PHB) is rather limited for unknown reasons. Therefore linear and novel branched polyesters were synthesized and subjected to the ASES process to explore the function property relationship. The properties of these polymers as well as of the ASES products were characterized by NMR spectroscopy, differential scanning calorimetry, light scattering, wide-angle X-ray scattering and scanning electron microscopy. It appears that high degrees of polymer crystallinity are the key factor for successful microsphere formation using the ASES process. Under the conditions investigated two types of polymers were especially suitable: semi-crystalline comb polyesters as well as comb polyesters in which crystallinity could be induced. These novel polymers are of particular interest for the ASES encapsulation technology since they combine beneficial properties both controlling drug release due to their three-dimensional architecture and faster biodegradability with sufficient mechanical stability to allow particle formation using supercritical carbon dioxide.
 ...
PMID:Biodegradable semi-crystalline comb polyesters influence the microsphere production by means of a supercritical fluid extraction technique (ASES). 1064 May 80

The phase structure and biodegradability were investigated for amorphous blends of chemosynthetic fully amorphous atactic poly(R,S-3-hydroxybutyrate) (a-PHB) with atactic poly(methyl methacrylate) (PMMA) and atactic poly(R,S-lactide) (a-PLA). The differential scanning calorimetry thermal analysis indicated that a-PHB/PMMA blends were partially miscible while a-PHB/a-PLA blends were miscible in the studied composition range. The biodegradations of the blends were carried out in phosphate buffer solution in the presence of bacterial poly(R-3-hydroxybutyrate) extracellular depolymerases purified from Alcaligenes faecalis T1 and P. stutzeri. Although a-PHB in the pure state was not degraded by these depolymerase, it was degraded by blending with PMMA and a-PLA. The results demonstrated that the enzymatic degradation of a-PHB can be induced by amorphous polymers such as PMMA and a-PLA. Also, the biodegradation rate of a-PHB in the blends decreased drastically when the degradation temperature is too much away from the polymer glass transition temperatures. On the basis of these results, a temperature window of the enzymatic degradation was first proposed for the blend and the essence of induced degradation was discussed.
 ...
PMID:Enzymatic degradation of atactic poly(R,S-3-hydroxybutyrate) induced by amorphous polymers and the enzymatic degradation temperature window of an amorphous polymer system. 1171 8

Commercial lipases were examined for their degradation efficiency of aliphatic polyester films. In 100 days immersion of polyester films in lipase solutions at 37 degrees C at pH 7.0, Lipase Asahi derived from Chromobacterium viscosum degraded polybutylene succinate-co-adipate (PBSA), poly (e-caprolactone) (PCL) and polybutylene succinate (PBS), and Lipase F derived from Rhizopus niveus degraded PBSA and PCL during 4-17 days. Lipase F-AP15 derived from Rhizopus orizae could degrade PBSA in 22 days. In these cases, PBS and PBSA were mainly degraded to dimers, whereas PCL was mainly degraded to monomers. Only poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHB/V) and poly (L-lactide) (PLA) were not degraded in the experiments. However, PLA degraded completely at 55 degrees C, pH 8.5 with Lipase PL during 20 days. This result could be explained with the sequential reactions of the chemical hydrolysis of the polymer to oligomers at higher pH and temperature, and the succeeding enzymatic hydrolysis of oligomers to the monomers.
 ...
PMID:Degradation of aliphatic polyester films by commercially available lipases with special reference to rapid and complete degradation of poly(L-lactide) film by lipase PL derived from Alcaligenes sp. 1244 16

Rabbit bone marrow cells were inoculated on 3D scaffolds of poly(lactic acid) (PLA), poly(3-hydroxybutyrate) (PHB) and poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) to evaluate their in vitro biocompatibilities. It was found that PHBHHx had the best performance on attachment, proliferation of bone marrow cells. The cells on PHBHHx scaffolds presented typical osteoblast phenotypes: round cell shape, high alkaline phosphotase (ALP) activity, strong calcium deposition, and fibrillar collagen synthesis. After incubation for 10 days, cells grown on PHBHHx scaffolds were approximately 2x10(5)ml(-1), 40% more than that on PHB scaffolds and 60% more than that on PLA scaffolds. ALP activity of the cells grown on PHBHHx scaffolds was up to about 65U/g scaffolds, 50% higher than that of PHB and PLA, respectively. The scanning electronic microscopy (SEM) results showed that PHBHHx scaffolds had the appropriate roughness for osteoblast attachment and proliferation comparing with PHB and PLA. All these indicated that PHBHHx was a suitable biomaterial for osteoblast attachment, proliferation and differentiation from bone marrow cells.
 ...
PMID:Attachment, proliferation and differentiation of osteoblasts on random biopolyester poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) scaffolds. 1460 5

Films made of poly (3-hydroxybutyrate) (PHB), poly(3-hydroxybutyrate- co-3-hydroxyhexanoate) (PHBHHx) consisting of 5%, 12% and 20% hydroxyhexanoate (HHx), respectively, were evaluated for biomedical application in comparison with poly (L-Lactide) (PLA). With the increase of HHx content in PHBHHx, the polymer surface properties changed accordingly. P(HB-co-20%-HHx) had the smoothest surface while PHB surface was most hydrophilic among the evaluated PHB and all the PHBHHx. All PHBHHx also showed strong protein affinity and biocompatibility. It was found that fibroblast and osteoblast had different responses to these polymers: fibroblast cells favored P(HB-co-20%-HHx), yet osteoblast cells preferred P(HB-co-12%-HHx). PHB and all PHBHHx appeared to have better biocompatibility for fibroblast and osteoblast compared with PLA. Polymers possessing different surface properties may help meet different cellular requirements. Combined with their good mechanical properties for elongation and adjustable biocompatibility, PHBHHx may meet the needs of growth requirements of different tissues and cells.
 ...
PMID:Effect of composition of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) on growth of fibroblast and osteoblast. 1535 Jul 80

A highly sensitive analytical method for evaluation of poly(L-lactide) (PLA), poly(epsilon-caprolactone) (PCL), poly(beta-hydroxybutyrate) (PHB), and poly(butylene succinate) (PBS) degradability was developed using coated cellulose paper, prepared by penetration and adhesion of these plastics into/onto the cellulose paper. Enzymatic degradability of the obtained plastic coated papers was evaluated using various commercial proteases and lipases. PLA coated paper was highly susceptible to subtilisin and mammalian enzymes, alpha-chymotrypsin, elastase and trypsin. To our knowledge, this is the first report on the degradation of PLA coated paper using subtilisin and mammalian enzymes. Almost all lipase preparations degraded PCL and PHB coated papers but not PBS coated paper. The biodegradability of plastic coated paper was greater than that of plastic powder. The penetration of plastic into cellulose paper by coating improved the plastic degradability, and can be regulated easily.
 ...
PMID:A new method for the evaluation of biodegradable plastic using coated cellulose paper. 1546 96

The substrate specificity of alpha-chymotrypsin and other serine proteases, trypsin, elastase, proteinase K and subtilisin, towards hydrolysis of various polyesters was examined using poly(L-lactide) (PLA), poly(beta-hydroxybutyrate) (PHB), poly(ethylene succinate) (PES), poly(ethylene adipate) (PEA), poly(butylene succinate) (PBS), poly(butylene succinate-co-adipate) (PBS/A), poly[oligo(tetramethylene succinate)-co-(tetramethylane carbonate)] (PBS/C), and poly(epsilon-caprolactone) (PCL). alpha-Chymotrypsin could degrade PLA and PEA with a lower activity on PBS/A. Proteinase K and subtilisin degraded almost all substrates other than PHB. Trypsin and elastase had similar substrate specificities to alpha-chymotrypsin.
 ...
PMID:Hydrolysis of polyesters by serine proteases. 1592 50

The in vivo tissue reactions and biodegradations of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx), poly(lactide) (PLA), poly(3-hydroxybutyrate) (PHB), blends of PHBHHx (X) and poly(ethylene glycol) (PEG) (E) with ratios of 1:1 (E1X1) and 1:5 (E1X5), respectively, were evaluated by subcutaneous implantation in rabbits. Results revealed that the degradation rate increased in the order of PHB < PHBHHx < PLA. During the implantation period, crystallinity of PHBHHx increased from 19% to 22% and then dropped to 14%. Gel permeation chromatography (GPC) displayed increasing polydispersity and typical bimodal distribution from 3 to 6 months. The above results suggested that rapid PHBHHx degradation occurred in amorphous region rather than in crystalline region. While the in vivo hydrolysis of PHB was found to start from a random chain scission both in amorphous and crystalline regions of the polymer matrix, as demonstrated by its hydrolysis process accompanied by a decrease in molecular weight with unimodal distribution and relatively narrow polydispersity. Compared to pure PHBHHx, PHBHHx-PEG blends showed accelerated weight loss of PHBHHx with weak molecular weight reduction. In general, PHBHHx elicited a very mild tissue response during implantation lasting 6 months compared with relative acute immunological reactions observed among PHB and PLA objects, respectively. Pronounced tissue responses were observed in the capsule surrounding E1X1 and E1X5 as characterized by the presence of lymphocytes, eosinophils and vascularization, which might be resulted from the continuous leaching of PEG.
 ...
PMID:In vivo studies of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) based polymers: biodegradation and tissue reactions. 1654 19

The objective of this study was to develop novel absorbable films suitable for use as a tissue-engineering scaffold for keratinocytes as a therapy for replacement of damaged skin. Poly(4-hydroxybutyrate) (P(4HB)) and poly (3-hydroxybutyrate) (P(3HB)) were blended with small amounts of the polysaccharides hyaluronic acid (HA), chitosan (CH), pectin and alginic acid, and were solution cast to produce porous films. The resulting composites had favorable mechanical properties, and these films were compared with two commercially available implantable films made of poly(L-lactide-co-D,L-lactide) (PLA copolymer) and HA benzyl ester. Tensile testing demonstrated that a high level of flexibility of P(4HB) was retained in the P(4HB)-polysaccharide composite films, whereas the P(3HB) film and its polysaccharide composites were stiffer and more brittle. The proliferation kinetics of adherent HaCaT keratinocytes on the films was examined in vitro. The porous surface of the P(4HB) and P(3HB) films blended with HA or CH promoted the growth of keratinocytes significantly. The order of maximum cell numbers on these films was P(4HB)/HA > P(4HB)/CH > P(3HB)/HA > P(3HB)/CH > P(3HB)/pectin > P(3HB)/alginic acid. Scanning electron microscopy and confocal laser scanning microscopy revealed differences in cell growth. Cells formed clusters on P(3HB) and its composites, while the cells grew as a confluent layer on P(4HB) and its composites. HaCaT cells formed large numbers of filaments only on P(4HB) films, indicating the excellent biocompatibility of this material. For the nonporous PHB films, the proliferation rate of cells was found to increase with decreasing hydrophobicity in the order: P(4HB) > P(3HB)/P(4HB) blend > P(3HB).
 ...
PMID:Growth of keratinocytes on porous films of poly(3-hydroxybutyrate) and poly(4-hydroxybutyrate) blended with hyaluronic acid and chitosan. 1793 18


1 2 3 4 Next >>