Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UNIPROT:A7KAX9 (grit)
 1,275 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

1. An experiment was conducted to determine the separate and combined effects of giving insoluble grit during the rearing period and small or large particle size (0.3 mm and 3 to 8 mm in diameter) limestone or oyster shell, as extra sources of calcium, during the laying period. 2. For the entire laying period the extra sources of calcium resulted in improved shell strength but, overall, grit-supplements during the rearing period did not affect either egg shell strength or other performance traits. 3. An analysis for interactions however revealed that limestone of larger particle size coupled with rearing period-grit resulted in improved egg-shell strength during the last quarter of the laying period.
 ...
PMID:Effect on shell strength of feeding supplemental sources of calcium to adult laying hens given insoluble grit during the rearing period. 367 73

A systematic mechanical and histologic evaluation of design variables affecting bone apposition to various biocompatible materials was undertaken. The variables investigated included material elastic modulus, material surface texture, as well as material surface composition. The implant materials included polymethylmethacrylate (PMMA), low-temperature isotropic (LTI) pyrolytic carbon, commercially pure (C.P.) titanium, and aluminum oxide (Al2O3). Implant surface texture was varied by either polishing or grit-blasting the various materials. Implant surface composition was varied by applying a coating of ultra-low temperature isotropic (ULTI) pyrolytic carbon to the various implants. A total of 12 types of implants were evaluated in vivo by placement transcortically in the femora of adult mongrel dogs for a period of 32 weeks. Following sacrifice, mechanical push-out testing was performed to determine interface shear strength and interface shear stiffness. The results obtained from mechanical testing indicate that for implants fixed by direct bone apposition, interface stiffness and interface shear strength are not significantly affected by either implant elastic modulus or implant surface composition. Varying surface texture, however, significantly affected the interface response to the implants. For each elastic modulus group the roughened surfaced implants exhibited greater strengths than the corresponding smooth surfaced implants. Undecalcified histologic evaluation of the implants demonstrated that the roughened implants exhibited direct bone apposition, whereas the smooth implants exhibited various degrees of fibrous tissue encasement. Thus, for implants utilizing direct bone apposition fixation, it appears that of the parameters investigated, implant surface texture is the most significant.
 ...
PMID:An evaluation of variables influencing implant fixation by direct bone apposition. 388 Mar 49

Fusarium moniliforme NRRL 13,163 produced two new fusaric acid analogs, a 10,11-dihydroxyfusaric acid and a diacid of fusaric acid in which the C-11 methyl was oxidized to a carboxyl. Several hundred milligrams of the 10,11-dihydroxyfusaric acid were routinely recovered from a kilogram of corn grit medium. It crystallized as white, irregularly shaped rectangles that melted at 153 to 154 degrees C. The diacid analog of fusaric acid crystallized as white rods that melted at 210 to 211 degrees C. Unlike the consistent recovery experienced with the 10,11-dihydroxyfusaric acid, the diacid analog proved difficult to purify after the initial discovery and was detectable in subsequent fermentations only by mass spectrometry.
 ...
PMID:Isolation and characterization of two new fusaric acid analogs from Fusarium moniliforme NRRL 13,163. 405 83

Two insecticide formulations were evaluated for skin irritation using albino rabbits (Stauffland-White strain). While the active ingredient alone produced only mild skin irritation, corn grit formulation produced severe skin irritation. Corn grit from three sources (A, B, and C) was similarly evaluated for skin irritation and at 24 hr, all samples produced erythema and edema of both the abraded and nonabraded test sites. Eschar was observed in 72 hr in about half of the rabbits and persisted through termination on the 7th day. Histologic examination of skin specimens revealed that all three corn grit samples produced epidermatitis. In addition, rabbits exposed to corn grit from two sources (A and B), developed moderate focal to severe diffuse suppurative necrotizing folliculitis and dermatitis. Large tubular branching nonseptate hyphae compatible with the Mucorales species were seen in hair follicle micropustules of rabbits treated with corn grit from sources A and B. Mycologic culture techniques applied to corn grit from each source revealed a potential pathogen in the genus Rhizopus isolated from samples from sources A and C but not B. The skin irritation test involved application of test material covered with gauze to both abraded and nonabraded skin. Rubber damming was placed over the gauze and secured with tape. After 24-hr exposure all bandaging and visible test material were removed. Skin irritation was evaluated immediately after removal and then periodically until termination at 7 days.
 ...
PMID:Skin irritation testing in rabbits complicated by dermal mucormycosis. 407 Sep 29

A mechanical and histological evaluation of LTI pyrolytic carbon implants was undertaken to determine the effect of various surface treatments on the retention characteristics of the implants. Five types of surfaces were evaluated, including as-deposited, fine grit-blasted, coarse grit-blasted, ground, and plasma oxygenated. The four surface treatments were chosen in an attempt to emulate the morphology of the as-deposited implants. The implants were evaluated in vivo by placement transcortically in the femora of adult mongrel dogs for periods of 12 to 24 weeks. Although the as-deposited implants exhibited the greatest interface strength at 12 weeks the results of mechanical testing after 24 weeks implantation indicated no statistically significant difference among the interface strength values or among the interface stiffness values of the implants. The histologic response of the implants was similar; while all implants exhibited areas of direct implant-bone apposition, the as-deposited implants exhibited this behavior to the greatest extent. Thus the ability to duplicate the biological response to the as-deposited LTI carbon surface appears possible by one or more of the treatments evaluated.
 ...
PMID:The effect of surface treatments on the interface mechanics of LTI pyrolytic carbon implants. 407 77

Reproductivity of pigeons is inhibited with mestranol incorporated in a synthetic grit; continual erosion releases daily doses. Young squabs may be permanently sterilized when fed crop milk by treated birds. A theoretical model of pigeon population dynamics using laboratory-obtained data shows the advantages of chemosterilization over killing as a means of pigeon control.
 ...
PMID:Pigeon control by chemosterilization: population model from laboratory results. 546 35

From 8 to 20 weeks of age crossbred pullets were offered a protein concentrate plus either wheat, millet or paddy rice as crushed or whole grain. These pullets were then fed on three laying diets which differed in either methionine content or bulk density. In the growing period pullets given whole grains were heavier, and ate more protein-concentrate and hard grit than those given crushed grains. In the laying period they matured earlier, laid more eggs and utilised food more efficiently than the others. Pullets fed on wheat consumed more hard grit and utilised food more efficiently than those given millet or paddy rice. Pullets fed on millet had a higher linoleic acid content in their livers and laid larger eggs than those reared on wheat. Pullets reared on paddy rice matured later and laid heavier eggs than those reared on wheat. Methionine content and bulk density of the laying diets had no effect on egg production.
 ...
PMID:Choice feeding of the replacement pullet on whole grains and subsequent performance on laying diets. 671 36

We have become increasingly aware of the presence of a type of image artifact normally appearing in anechoic areas (eg, cyst, bladder, gallbladder) and giving the appearance of "sludge" or "debris." These artifactual echoes may be caused by the fact that the finite width of the transducer beam pattern produces a finite thickness of the patient scan plane. All echoes produced in this "thick" scan plane are misinterpreted as being due to structures in the normally assumed "thin" scan plane. We have tested and verified this hypothesis by simulating soft tissue interfaces with 400 grit silicon carbide sandpaper in a water tank. A set of clues are proposed to enable the rapid identification of these artifacts.
 ...
PMID:Slice-thickness artifacts in gray-scale ultrasound. 679 35

The objective of this research was to investigate some of the potentially controlling factors influencing the atmospheric releases of volatile organic chlorinated compounds from the activated-sludge sewage treatment process. The field study was designed to evaluate the wastewater and airborne concentrations of six chlorinated compounds: hexachlorobicycloheptadiene (hex-BCH), heptachlorobicycloheptene (Hex-VCL), chlordene, chloroform (CHCl3), carbon tetrachloride (CCl4) and tetrachloroethylene (TCE). Analysis of samples consisted of saturating 5 mL aliquots with sodium chloride, extracting with an equal amount of petroleum ether (PE) and subsequent analysis using a gas chromatograph. The air samples collected on Chromsorb 102 were desorbed with 2 mL PE. The study revealed that the highest wastewater concentrations for the water-insoluble hex-BCH, hex-VCL and chlordene were found in the aeration basins, which suggests adsorption of these compounds to the biomass. The plant effluent wastewater concentrations were reduced because of airborne release and suspended solids separation in the clarifiers. In contrast, the wastewater concentrations for the more water-soluble CHCl3, CCl4 and TCE were significantly reduced in the aeration basins. This is because of aerial stripping at the grit-chamber weir. This study suggests that the water-insoluble compounds have prolonged aerial release from the aeration basins. The water-insoluble compounds adhere to the biomass, which is recycled through the plant. The aerial release of these water-insoluble compounds was enhanced by increased aeration rate but depressed by higher suspended solids concentrations.
 ...
PMID:Worker exposure to chlorinated organic compounds from the activated-sludge wastewater treatment process. 683 35

Evaluation were made of the effect of different finishing procedures on the surface textures of a conventional composite material, two newly introduced microfiller composite resins, a visible light polymerized resin, and a glass ionomer cement. The two micro-filler composite materials appeared to be superior in finishability compared with those materials loaded with larger filler particles. The use of fine grit devices particularly resulted in smooth surfaces. This is in contrast to the other materials which always showed rough surface textures with protruding filler particles. The use of a polishing paste improved the surface finish of the micro-filler materials in contrast to the materials with larger filler particles.
 ...
PMID:Effect of finishing procedures on surface textures of some resin restoratives. A comparison between new and old types of composite resins. 693 98


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>