Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C1832588 (PSS)
 2,979 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Progressive systemic sclerosis is characterized by extensive generalized fibrotic destruction associated with increased accumulation of collagen and other extracellular macromolecules in the skin and other involved organs. It has been suggested that mediators released from mononuclear or endothelial cells play a critical role in the initial activation of connective tissue metabolism. Transforming growth factors beta(TGF-beta 1, TGF-beta 2) mediate the inhibition of epithelial cell proliferation and the induction of fibronectin and collagen gene expression. Therefore, we investigated the distribution of both TGF-beta 1 and TGF-beta 2 mRNA and the final proteins in PSS skin in comparison with other inflammatory dermatoses and healthy controls by means of in situ hybridization and immunohistochemistry. Our studies revealed TGF-beta 1 and -beta 2 mRNA in dermal and subcutaneous infiltrating cells in both acute and chronic PSS, but also in the other inflammatory skin disorders. In the vicinity of this infiltrate single TGF-beta positive fibroblasts could be found in acute PSS. The cytoplasm of epithelial cells of all skin adnexa showed TGF-beta transcripts and no apparent differences were seen in the distribution and number of autoradiographic grains between diseased and healthy skin samples. Especially, we could demonstrate abundant expression of TGF-beta 1/2 in epithelial hair follicle cells of the outer root sheath. Generally, the expression of TGF-beta 2 was less abundant than TGF-beta 1. Immunohistochemical studies revealed the same distribution pattern of the final proteins. Our data indicate that TGF-beta expression in infiltrating cells is not a specific feature of fibrotic disease, but seems to be associated with highly proliferating cells in general, perhaps functioning as common mediator in regulation of cellular physiology with special importance for negative control of cell growth.
 ...
PMID:Transcription and expression of transforming growth factor type beta in the skin of progressive systemic sclerosis: a mediator of fibrosis? 229 95

Electrostatic layer-by-layer (LbL) self-assembly, a novel method for ultrathin film coating has been applied to silicone rubber to encourage nerve cell adhesion. The surfaces studied consisted of precursor layers, with alternating cationic poly(ethyleneimine) (PEI) and anionic sodium poly(styrenesulfonate) (PSS) followed by alternating laminin and poly-D-lysine (PDL) layers or fibronectin and PDL layers. Film growth increased linearly with the number of layers. Every fibronectin/PDL and laminin/PDL bilayer was 4.4 and 3.5 nm thick, respectively. All layers were more hydrophilic than the unmodified silicone rubber surface, as determined from contact angle measurements. Of the coatings studied, a PDL layer was the most hydrophilic. A multilayer film with composition [PSS/PEI]3+[fibronectin/PDL]4 or [PSS/PEI]3+[laminin/PDL]4 was highly favorable for neuron adhesion, in contrast to bare silicone rubber substrate. The film coated on silicone rubber is biocompatible for cerebellar neurons with active viability, as shown by lactate dehydrogenase (LDH) assay and fluorescence cellular metabolism observations. These results demonstrate that LbL self-assembly provides an effective approach to apply films with nanometer thickness to silicone rubber. Such only few nanometer thick films are biocompatible with neurons, and may be used to coat devises for long-term implant in the central nervous system.
 ...
PMID:Biocompatibility of layer-by-layer self-assembled nanofilm on silicone rubber for neurons. 1294 43

The Layer-by-layer deposition of positively and negatively charged macromolecular species is an ideal method for constructing thin films incorporating biological molecules. We investigate the adsorption of fibronectin onto polyelectrolyte multilayer (PEM) films using optical waveguide lightmode spectroscopy (OWLS) and atomic force microscopy (AFM). PEM films are formed by adsorption onto Si(Ti)O2 from alternately introduced flowing solutions of anionic poly(sodium 4-styrenesulfonate) (PSS) and cationic poly(allylamine hydrochloride) (PAH). Using OWLS, we find the initial rate and overall extent offibronectin adsorption to be greatest on PEM films terminated with a PAH layer. The polarizability density of the adsorbed protein layer, as measured by its refractive index, is virtually identical on both PAH- and PSS-terminated films; the higher adsorbed density on the PAH-terminated film is due to an adsorbed layer of roughly twice the thickness. The binding of monoclonal antibodies specific to the protein's cell binding site is considerably enhanced to fibronectin adsorbed to the PSS layer, indicating a more accessible adsorbed layer. With increased salt concentration, we find thicker PEM films but considerably thinner adsorbed fibronectin layers, owing to increased electrostatic screening. Using AFM, we find adsorbed fibronectin layers to contain clusters; these are more numerous and symmetric on the PSS-terminated film. By considering the electrostatic binding of a segmental model fibronectin molecule, we propose a picture of fibronectin adsorbed primarily in an end-on-oriented monolayer on a PAH-terminated film and as clusters plus side-on-oriented isolated molecules onto a PSS-terminated film.
 ...
PMID:Fibronectin adsorption onto polyelectrolyte multilayer films. 1587 70

This study was performed to determine the stability of the adherens junction (AJ)-associated proteins at the smooth muscle cell (SMC) plasma membrane during relaxing and activating conditions. Dog stomach, ileum, colon, and trachea tissues were stored in Ca2+-free PSS or regular PSS or were activated in 10 muM carbachol in PSS before rapid freezing. The tissues were subsequently sectioned and immunoreacted using antibodies for vinculin, talin, fibronectin, and caveolin to determine their cellular distribution in these tissues under these conditions. In all four tissues and under all three conditions, the distribution of these four proteins remained localized to the periphery of the cell. In transverse tissue sections, the AJ-associated proteins formed a distinct punctate pattern around the periphery of the SMCs at the plasma membrane. These domains alternated with the caveolae (as identified by the presence of caveolin). In longitudinal tissue sections, the AJ-associated proteins formed continuous tracks or staves, while the caveolae remained punctate in this dimension as well. Caveolin is not present in the tapered ends of the SMCs, where the AJ-associated proteins appear continuous around the periphery. Densitometry of the fluorophore distribution of these proteins showed no shift in their localization from the SMC periphery when the tissues were relaxed or when they were activated before freezing. These results suggest that under physiologically relaxing and activating conditions, AJ-associated proteins remain stably localized at the plasma membrane.
 ...
PMID:Smooth muscle adherens junctions associated proteins are stable at the cell periphery during relaxation and activation. 1603 7

Surface engineering is a critical effort in defining substrates for cell culture and tissue engineering. In this context, multilayer self-assembly is an attractive method for creating novel composites with specialized chemical and physical properties that is currently drawing attention for potential application in this area. In this work, effects of thickness, surface roughness, and surface material of multilayer polymer nanofilms on the growth of rat aortic smooth muscle cells were studied. Polyelectrolyte multilayers (PEMs) electrostatically constructed from poly(allylamine hydrochloride) and poly(sodium 4-styrenesulfonate) (PSS) with gelatin, fibronectin, and PSS surface coatings were evaluated for interactions with smooth muscle cells (SMCs) in an in vitro environment. The results prove that PEMs terminated with cell-adhesive proteins promote the attachment and further growth of SMCs, and that this property is dependent upon the number of layers in the underlying multilayer film architecture. Cell roundness and number of pseudopodia were also influenced by the number of layers in the nanofilms. These findings are significant in that they demonstrate that both surface coatings and underlying architecture of nanofilms affect the morphology and growth of SMCs, which means additional degrees of freedom are available for design of biomaterials. This work supports the excellent potential of nanoassembled ultrathin films for biosurface engineering, and points to a novel perspective for controlling cell-material interaction that can lead to an elegant system for defining the extracellular in vitro environment.
 ...
PMID:Cellular response to gelatin- and fibronectin-coated multilayer polyelectrolyte nanofilms. 1611 25

Tissue engineering research has been on going for many years, people are making all the effort to explore the cell functions in cellular level and even in molecular level. Making the cells functional in an in vitro environment is a preliminary goal for the implantation and repair of complicated tissues/organs. Fabricating artificial ECM to mimic the in vivo environment is an essential approach in tissue engineering. The work in this paper is to study how rat aorta smooth muscle cells (RASMCs) behave in two engineered cell culture scaffolds: gelatin- and fibronectin (FN)-coated micropatterns. The investigation on the initial attachment and further growth of SMCs cultured on gelatin- and FN-coated micropatterns was addressed. This study focused on both the characterization of gelatin and fibronectin assembly properties and cell responses to these two protein-coated micropatterns. Thin film patterns with gelatin and fibronectin coatings were fabricated on microscope glass slides using photolithography, electrostatic layer-by-layer self-assembly and lift-off (LbL-LO) technologies. In this work, the scaffolds were built up by commonly used polyelectrolyte materials and proteins through LbL process, containing cationic poly(diallyldimethylammonium chloride) (PDDA), poly(allylamine hydrochloride) (PAH), anionic poly(sodium 4-styrenesulfonate) (PSS), gelatin and fibronectin. The resulting polyelectrolyte thin films were characterized by contact angle (CA), quartz crystal microbalance (QCM), atomic force microscopy (AFM), and fluorescence microscopy. CA measurement shows the consistent hydrophylicity of gelatin surfaces in different number of layers with LbL deposition method. Different from our previous QCM measurement of gelatin, fibronectin does not show high electrostatic attraction to either positively or negatively charged polyelectrolytes, although it can be weakly assembled to both polyelectrolyte surfaces. AFM images show Gelatin- and FN-coated micropatterns are around 50-60 nm thick. RASMCs were cultured on these gelatin- and FN-coated micropatterns. It was observed that, for the cells cultured on gelatin-coated micropatterns, they initially landed on the gelatin-coated surface, not on the PDDA-coated surface in between. But further growth of the cells was affected by the shape of the patterns: strip pattern limited cell growth beyond the patterns, but square patterns could not. While, it was found interestingly, for the cells cultured on FN-coated micropatterns, SMCs initially landed on PDDA-coated surface, and then migrated to FN-coated both square and strip patterns. These findings indicate that both gelatin and fibronectin are adhesive proteins, but they have different effects on the initial attachment and later growth for SMCs.
 ...
PMID:Comparison of selective attachment and growth of smooth muscle cells on gelatin- and fibronectin-coated micropatterns. 1643 14

In tissue engineering, surface characteristics of a biomaterial are one of most important factors determining the compatibility with the environment. They influence attachment and growth of cells onto the material. In many cases, the surface should to be modified and engineered in the desired direction. The modification of non-adhesive surfaces with polyelectrolyte multilayer films (PMF) was recently depicted as a powerful technique to promote the growth of different cell lines. In this study, we evaluated the possible use of two different PMF as surface modification for the culture of mesenchymal stem cells (MSC). We used two types of PMF which differed by the nature of the initial anchoring layer which was poly(ethylenimine) (PEI) or poly(allylamine hydrochloride) (PAH). This initial polyelectrolytes adsorption was followed by the alternated deposition of poly(sodium 4-styrenesulfonate) (PSS) and (PAH) in order to obtain a PEI-(PSS-PAH)(3) film or a PAH-(PSS-PAH)(3) film. In order to control the behaviour of MSC, the cell viability was evaluated by Alamar Blue assay and the actin cytoskeleton was labelled and visualised in a confocal microscope. The behaviour of cells on the two PMF was compared to cells cultivated on surfaces treated with fibronectin. The results showed that PAH-(PSS-PAH)(3) PMF improve the growth of cells, inducing a higher cell viability compared to PEI-(PSS-PAH)(3) PMF and fibronectin at 2, 3 and 7 days of culture. Moreover, those cells showed a well-organized actin cytoskeleton. In conclusion, PAH-(PSS-PAH)(3) polyelectrolyte multilayer film seems to constitute an excellent material for MSC seeding.
 ...
PMID:Polyelectrolyte multilayer films: effect of the initial anchoring layer on the cell growth. 1906 22

Human mesenchymal stem cells (hMSCs) are colony-forming unit fibroblasts (CFU-F) derived from adult bone marrow and have significant potential for many cell-based tissue-engineering applications. Their therapeutic potential, however, is restricted by their diminishing plasticity as they are expanded in culture. In this study, we used N-isopropylacrylamide (NIPAM)-based thermoresponsive polyelectrolyte multilayer (N-PEMU) films as culture substrates to support hMSC expansion and evaluated their effects on cell properties. The N-PEMU films were made via layer-by-layer adsorption of thermoresponsive monomers copolymerized with charged monomers, positively charged allylamine hydrochloride (PAH), or negatively charged styrene sulfonic acid (PSS) and compared to fetal bovine serum (FBS) coated surfaces. Surface charges were shown to alter the extracellular matrix (ECM) structure and subsequently regulate hMSC responses including adhesion, proliferation, integrin expression, detachment, and colony forming ability. The positively charged thermal responsive surfaces improved cell adhesion and growth in a range comparable to control surfaces while maintaining significantly higher CFU-F forming ability. Immunostaining and Western blot results indicate that the improved cell adhesion and growth on the positively charged surfaces resulted from the elevated adhesion of ECM proteins such as fibronectin on the positively charge surfaces. These results demonstrate that the layer-by-layer approach is an efficient way to form PNIPAM-based thermal responsive surfaces for hMSC growth and removal without enzymatic treatment. The results also show that surface charge regulates ECM adhesion, which in turn influences not only cell adhesion but also CFU-forming ability and their multi-lineage differentiation potential.
 ...
PMID:N-isopropylacrylamide-based thermoresponsive polyelectrolyte multilayer films for human mesenchymal stem cell expansion. 2057 92

The cell migration plays a crucial role in a variety of physiological and pathological processes and can be regulated by the cell-substrate interactions. We found previously that the poly(sodium 4-styrenesulphonate) (PSS)/poly(diallyldimethylammonium) chloride (PDADMAC) multilayers post-treated in 1-5 M NaCl solutions result in continuous changes of their physico-chemical properties such as thickness, chemical composition, surface charge, swelling ratio and wettability. In this study, the responses of human smooth muscle cells (SMCs) on these salt-treated multilayers, particularly the governing factors of cellular migration that offer principles for designing therapeutics and implants, were disclosed. The cell migration rate was slowest on the 3 M NaCl-treated multilayers, which was comparable with that on tissue culture plates, but it was highest on 5 M NaCl-treated multilayers. To elucidate the intrinsic mechanisms, cell adhesion, proliferation, adhesion and related gene expressions were further investigated. The SMCs preferred to attach, spread and proliferate on the PSS-dominated surfaces with well-organized focal adhesion and actin fibres, especially on the 3 M NaCl-treated multilayers, while were kept round and showed low viability on the PDADMAC-dominated surfaces. The relative mRNA expression levels of adhesion-related genes such as fibronectin, laminin and focal adhesion kinase, and migration-related genes such as myosin IIA and Cdc42 were compared to explain the different cellular behaviours. These results reveal that the surface chemistry and the swelling of the salt-treated multilayers govern the cell migration behaviours.
 ...
PMID:Influences of surface chemistry and swelling of salt-treated polyelectrolyte multilayers on migration of smooth muscle cells. 2289 70

The behaviour of cancerous epithelial prostatic cells (PC3) growing on polyelectrolytes (PE) coatings was compared to the behaviour of immortalized normal prostatic cells (PNT-2). The cell behaviour was evaluated and quantified in terms of initial cell attachment, growth, metabolic activity, morphometry, adhesion, apoptosis and stress related gene expression. Both the anionic PSS (poly(sodium 4-styrenesulphonate))-terminated surface and cationic PAH (poly(allylamine hydrochloride))-terminated surfaces were not cytotoxic. The initial attachment of cells was better on the PAH-terminated surface compared to fibronectin. However, the proliferation rate of PC3 cells was reduced on the PAH-terminated surface and slightly increased on the PSS coatings. Only PAH prevented the clustering phenotype of PC3 and reduced the number of focal adhesion points as compared to fibronectin or PSS coatings. In contrast, none of the PE surfaces significantly affected the biological responses of PNT-2 cells. PAH-terminating films provide a tool to preferentially modulate the growth of some cancerous phenotypes, in this case as a micro-environment that reduces the growth of metastatic PC3 cells.
...
PMID:The modulation of attachment, growth and morphology of cancerous prostate cells by polyelectrolyte nanofilms. 2406 Apr 21


1 2 Next >>