Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C1832588 (PSS)
 2,979 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

We present a detailed study on the incorporation of single-walled carbon nanotubes (SWNTs) into lyotropic liquid crystals (LLC) by phase separation in the presence of polyelectrolytes. Two cases were studied in this work: (i) incorporation of SWNTs into the LLC phase formed by an anionic surfactant sodium dodecyl sulfate (SDS) in the presence of an anionic polyelectrolyte poly(sodium styrenesulfonate) (PSS); (ii) incorporation of SWNTs into the LLC phase formed by a cationic surfactant cetyltrimethylammonium bromide (CTAB) in the presence of a cationic polyelectrolyte poly(diallydimethylammonium chloride) (PDADMAC). The SWNTs/LLC composites were characterized by polarized optical microscopy (POM) observations and small-angle X-ray scattering (SAXS) measurements. In both systems, the surfactant phase was condensed into a hexagonal lattice by the polyelectrolyte within the investigated concentration range. Several factors that can influence the property of SWNTs/LLC composite were examined, including concentration of surfactants and polyelectrolytes and temperature. Aggregated SWNTs were not observed, indicating that SWNTs were well dispersed in the LLC phases. SAXS measurements showed the lattice parameter of the host LLC phase changed upon varying the mixing ratio of polyelectrolyte to ionic surfactant. The SWNTs/LLC hybrids showed considerable stability against temperature rise in both systems, and desorption of surfactant from SWNTs was not observed at higher temperature.
 ...
PMID:Single-walled carbon nanotube/lyotropic liquid crystal hybrid materials fabricated by a phase separation method in the presence of polyelectrolyte. 2041 38

The influence of common cationic surfactants on the physical properties of differently composed polyelectrolyte films prepared by the layer-by-layer (LbL) technology was investigated. Free-standing polyelectrolyte films as microcapsules showed a fast, strong response to the addition of less than 1 mM cationic surfactant cetyltrimethylammonium bromide (CeTAB). As a function of the polyelectrolyte composition, the behavior of the capsules varied from negligible changes to complete disintegration via strong swelling. The response of microcapsules consisting of (poly(allylamine hydrochloride)(PAH)/poly(styrene sulfonate)(PSS))(4) was associated with a 5-fold volume increase, a fast switch of permeability, and in the case of fluorescently labeled films a 4-fold increase in fluorescence intensity. The kinetics and strengths of the interaction process were investigated by confocal laser scanning microscopy (CLSM) and fluorescence spectroscopy. Also, the relative stabilities of the polycation/polyanion and surfactant/polyanion complexes were determined. A mechanism was suggested to explain the interactions between the cationic surfactants and polyelectrolyte capsules. The strong response can be exploited in potential applications such as the triggered release of drugs or other encapsulated materials, the fluorescence-based detection of cationic detergents, and a switchable stopper in microchannels. However, the high sensitivity of LbL films to traces of cationic surfactants can also limit their applicability to the encapsulation of drugs or other materials because pharmaceutical or technical formulations often contain cationic surfactants as preservatives such as benzalkonium salts (BAC). It was demonstrated that undesired capsule opening can be effectively prevented by cross-linking the polyelectrolyte multilayers.
 ...
PMID:Strong response of multilayer polyelectrolyte films to cationic surfactants. 2141 52

The quartz crystal microbalance with dissipation technique (QCM-D) and atomic force microscopy (AFM) have been employed to study the interaction of N-tetradecyl trimethyl ammonium bromide (TdTmAB) with polyelectrolyte multilayers containing poly(sodium 4-styrene sulfonate) (PSS) as the polyanion and either poly(allylamine hydrochloride) (PAH) or poly(diallyl dimethyl ammonium chloride) (PDADMAC) as the polycations. The multilayers were exposed to aqueous solutions of TdTmAB. This resulted in a selective removal of PDADMAC PSS layers while layers with PAH as polycation remained stable. It is suggested that PDADMAC/PSS multilayers can be employed as strippable protecting layers.
 ...
PMID:Controlled stripping of polyelectrolyte multilayers by quaternary ammonium surfactants. 2163 50

A cationic hydrolytical-polycarboxybetaine (HPCB), poly(N-ethyl acetate-4-vinylpyridinium bromide) was synthesized by incorporating ester group into the side chain of polycarboxybetaine (PCB). The hydrolytic behaviors of HPCB samples in pH 7.4 phosphate buffer saline (PBS) were investigated by FT-IR and (1)H NMR. The layer-by-layer (LbL) assembly of HPCB/poly (sodium 4-styrenesulfonate) PSS and the disintegration of HPCB/PSS multilayer films were monitored by UV-vis absorption spectroscopy, quartz crystal microbalance (QCM) and atomic force microscopy (AFM). The disintegrated behavior of multilayer films was studied in detail by changing the cationic degree of HPCB and the pH of the immersion solution (PBS) in the disintegration process. The disintegration time of HPCB/PSS multilayer films could be controlled widely from 2 min to 30 days in PBS.
 ...
PMID:Tunable disintegration of layer-by-layer assembly multilayer films based on hydrolytical-polybetaine at wide-range time. 2165 45

The impact of an electrolyte on aqueous mixtures of oppositely charged macromolecules and surfactants is usually explained by assuming an equilibrium association between the components. In this work, it is shown that the nonequilibrium character of polyelectrolyte/surfactant systems plays a crucial role in the interpretation of the effect of salt. Experimental investigations of mixtures of sodium poly(styrenesulfonate) (PSS) and hexadecyltrimethylammonium bromide (CTAB) reveal two distinct effects of added sodium chloride (NaCl). At small and moderate NaCl concentrations, the major impact of the electrolyte is manifested in the reduction of the kinetically stable composition range in which the PSS/CTAB mixtures are trapped in the nonequilibrium colloidal dispersion state. The application of high salt concentrations, however, primarily affects the equilibrium phase properties through considerably decreasing the amount of surfactant bound to the polyelectrolyte.
 ...
PMID:Effect of salt on the equilibrium and nonequilibrium features of polyelectrolyte/surfactant association. 2170 50

Copper nanoparticles are prepared in aqueous solution by reducing copper ions with hydrazine hydrate in the presence of cetyl trimethylammonium bromide (CTAB) and polyvinylpyrrolydone (PVP) as stabilizers. With only CTAB was used as stabilizer, copper nanoparticles are aggregated and partially oxidized to Cu(2)O. When both PVP and CTAB were used, dispersed copper nanoparticles with 56 nm diameter were obtained. Copper nanoparticles are simply mixed with poly (3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT/PSS) in aqueous solution to form conducting composite. The effect of copper weight percent and surfactants on the conductivity and stability of the composite has been investigated.
 ...
PMID:Copper nanoparticles incorporated with conducting polymer: effects of copper concentration and surfactants on the stability and conductivity. 2199 48

This paper studies the impact on the different surfactants and capacity of the oxidant for the synthesis of polypyrrole (PPy). The soluble PPy has also been studied. PPy was characterized mainly from the surface morphology, Fourier transform infrared spectroscopy, and conductivity sigma. First, using cetyltrimethylammonium bromide (CTAB) as the surfactant doped in an acid doping environment and without using ammonium persulfate (APS) as an oxidant, we determined the different capacities of the oxidant to synthesize the PPy. Scanning electron microscopy, Fourier transform infrared spectroscopy, and a four-probe conductivity meter were used to characterize the PPy. The acid doping conductivity was found to be 25 S/cm higher. Then, the solubility of polypyrrole was studied by doping with sodium dodecyl benzene sulfonate (SDBS), polyethylene glycol (PEG), and poly(styrene sulfonate) (PSS), proceeding the above-mentioned characterization.
 ...
PMID:Synthesis and conductive properties of polypyrrole nanocomposites. 2241 5

Macromolecular characteristics and morphology of water-soluble complexes between sodium poly(styrene sulfonate) (PSS) and tetradecyltrimethylammonium bromide have been followed as a function of surfactant-to-polymer charge ratio (S/P) to elicit possible changes in the complexation mechanism. As revealed by light scattering, shorter PSS (30 and 150 repeat units) yield multichain complexes while longer PSS (450 and 5000 repeat units) form single-chain species throughout 0 < S/P < 0.9. Irrespective of PSS chain length, the complexes exist in solution in a swollen coil conformation and undergo a compaction with S/P but never collapse into a globule. Even when the free PSS chain is too short to coil (30 repeat units), the complexes adopt a coiled conformation due to multichain aggregation. Morphological changes (manifested by a hypochromic shift in UV spectra of the complexes at S/P < 0.5 and an increase in the local surfactant mobility observed at S/P > 0.5 by ESR) strongly suggest a change in the formation mechanism of the complexes with a transition near S/P = 0.5.
 ...
PMID:Macromolecular and morphological evolution of poly(styrene sulfonate) complexes with tetradecyltrimethylammonium bromide. 2299 69

The uniform-sized manganese oxide nanoparticles (the oleic-capped MnO NPs) were synthesized by the thermal decomposition of Mn-oleate complex and were transferred into water with the help of cationic surfactant of cetyltrimethyl ammonium bromide (CTAB), then the poly(vinylpyrrolidone) (PVP) membrane was further coated on to them with the aid of anionic dispersant of poly(styrenesulfonate) (PSS) by layer-by-layer electrostatic assembly to render them water soluble and biocompatible. They were characterized by transmission electron microscopy (TEM), dynamic light scattering (DLS), X-ray diffraction (XRD), Fourier-transform infrared (FTIR) and MTT assay. In vitro cellular uptake test revealed the MnO@PVP NPs were low cytotoxic, biocompatible and could be used as a T,-positive contrast agent for passive targeting magnetic resonance imaging (MRI). Interestingly, signal enhancement in cerebral spinal fluid (CSF) spaces in vivo experiment suggested that the MnO@PVP NPs can pass through the blood brain barrier (BBB). These results show that MnO@PVP NPs are good candidates as MRI contrast agents with the lack of cytotoxicity and have great potential applications in magnetic nano-device and biomagnetic field.
 ...
PMID:Water-soluble and biocompatible MnO@PVP nanoparticles for MR imaging in vitro and in vivo. 2385 61

With the development of Au nanorods for a number of biomedical applications, understanding their cellular responses has become increasingly important. In this study, we systematically evaluated the cellular uptake behaviour and cytotoxicity of Au nanorods with various surface coatings, including organic cetyltrimethylammonium bromide (CTAB), poly(sodium 4-styrenesulfonate) (PSS), and poly(ethylene glycol) (PEG), and inorganic mesoporous silica (mSiO2), dense silica (dSiO2), and titanium dioxide (TiO2). The cellular behaviour of Au nanorods was found to be highly dependent on both the surface coating and the cell type. CTAB-, PSS-, and mSiO2-coated Au nanorods exhibit notable cytotoxicity, while PEG-, dSiO2-, and TiO2-coated Au nanorods do not induce cell injury. Optical imaging studies indicated that the cell type plays a preferential role in Au nanorod cellular uptake. Higher cellular uptake of Au nanorods was seen in U-87 MG, PC-3, MDA-MB-231, and RAW 264.7 cells, as opposed to HepG2 and HT-29 cells. In addition, Au nanorod cellular uptake is also highly affected by serum protein binding to the surface coating. mSiO2-, dSiO2-, and TiO2-coated Au nanorods show significantly higher cellular uptake than PSS- and PEG-coated ones, which results in a better photothermal ablation effect for Au nanorods with the inorganic surface coatings. Our study provides valuable insights into the effects of the surface modification on the biocompatibility, cellular uptake, as well as biomedical functions of Au nanorods.
...
PMID:Cellular uptake behaviour, photothermal therapy performance, and cytotoxicity of gold nanorods with various coatings. 2515 43


<< Previous 1 2 3 4 5 Next >>