Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C1832588 (PSS)
 2,979 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Electrochromic multilayer films consisting of polyoxometalate (POM) cluster alpha-K(10)[P(2)W(17)O(61)].17H(2)O (P(2)W(17)), copper(II) complex [Cu(II)(phen)(2)](NO(3))(2) (phen = 1,10-phenithroline), and iron complex [Fe(II)(phen)(3)](ClO(4))(2) were fabricated on silicon, quartz and ITO substrates by layer-by-layer self-assembly method. The multilayer films, PSS/Cu(II)(phen)(2)/[(P(2)W(17)/Cu(II)(phen)(2))](n) and PSS/Fe(II)(phen)(3)/[(P(2)W(17)/Fe(II) (phen)(3))](n) were characterized by UV-vis spectra, X-ray photoelectron spectra, cyclic voltammetry (CV), chronoamperometric (CA) and in-situ spectral electrochemical measurements. The interesting feature of the electrochromic film is its adjustable color by reduction of both transition metal complex and polyoxometalate at different potentials. The multilayer films also exhibit high optical contrast, suitable response time and low operation potential due to the presence of mono-lacunary-substituted polyoxometalate and transition metal complex. This is the first example that the color of electrochromic film can be adjustable, which gives valuable information for exploring new electrochromic materials with tunable colors.
 ...
PMID:Electrochromic multilayer films of tunable color by combination of copper or iron complex and monolacunary dawson-type polyoxometalate. 1685 64

Siderophores are compounds secreted under low iron stress, that act as a specific ferric iron chelate agents and due to their potentialities in the biological control of phytopathogenic fungi and bacteria, their study has been stimulated in recent years. Siderophores produced by different Pseudomonas species have been widely studied as biological agents and it is an alternative to take into account in the control of phytopathogenic microorganisms in agriculture. The purpose of this paper was to study the influence of some culture medium, and the iron concentration in the production of this metabolite. The experiments were carried out in a conventional batch system in succinate, glucose and glutamate medium. The highest metabolite concentration was obtained in glucose and glutamate medium. The increase of Fe(III) concentration, had a negative effect in siderophores production, especially above 10 microM. The evaluation of the studied media led to the conclusion that it is possible to increase the production of this metabolite by the strain of Pseudomonas aeruginosa PSS, in a glutamate medium without iron addition.
 ...
PMID:Evaluation of the siderophores production by Pseudomonas aeruginosa PSS. 1706 84

The surfaces of nanoscale zerovalent iron (NZVI) used for groundwater remediation must be modified to be mobile in the subsurface for emplacement. Adsorbed polymers and surfactants can electrostatically, sterically, or electrosterically stabilize nanoparticle suspensions in water, but their efficacy will depend on groundwater ionic strength and cation type as well as physical and chemical heterogeneities of the aquifer material. Here, the effect of ionic strength and cation type on the mobility of bare, polymer-, and surfactant-modified NZVI is evaluated in water-saturated sand columns at low particle concentrations where filtration theory is applicable. NZVI surface modifiers include a high molecular weight (MW) (125 kg/mol) poly(methacrylic acid)-b-(methyl methacrylate)-b-(styrene sulfonate) triblock copolymer (PMAA-PMMA-PSS), polyaspartate which is a low MW (2-3 kg/mol) biopolymer, and the surfactant sodium dodecyl benzene sulfonate (SDBS, MW = 348.5 g/mol). Bare NZVI with an apparent zeta-potential of -30 +/- 3 mV was immobile. Polyaspartate-modified nanoiron (MRNIP) with an apparent zeta-potential of -39 +/- 1 mV was mobile at low ionic strengths (< 40 mM for Na+ and < 0.5 mM for Ca2+), and had a critical deposition concentration (CDC) of approximately 770 mM Na+ and approximately 4 mM for Ca2+. SDBS-modified NZVI with a similar apparent zeta-potential (-38.3 +/- 0.9 mV) showed similar behavior (CDC approximately 350 mM for Na+ and approximately 3.5 mM for Ca2+). Triblock copolymer-modified NZVI had the highest apparent zeta-potential (-50 +/- 1.2 mV), the greatest mobility in porous media, and a CDC of approximately 4 M for Na+ and approximately 100s of mM for Ca2+. The high mobility and CDC is attributed to the electrosteric stabilization afforded by the triblock copolymer but not the other modifiers which provide primarily electrostatic stabilization. Thus, electrosteric stabilization provides the best resistance to changing electrolyte conditions likely to be encountered in real groundwater aquifers, and may provide transport distances of 10s to 100s of meters in unconsolidated sandy aquifers at injection velocities used for emplacement.
 ...
PMID:Ionic strength and composition affect the mobility of surface-modified Fe0 nanoparticles in water-saturated sand columns. 1852 17

The surfaces of reactive nanoscale zerovalent iron (NZVI) particles used for in situ groundwater remediation are modified with polymers or polyelectrolytes to enhance colloidal stability and mobility in the subsurface. However, surface modification decreases NZVI reactivity. Here, the TCE dechlorination rate and reaction products are measured as a function of adsorbed polyelectrolyte mass for three commercially available polyelectrolytes used for NZVI surface modification including poly(styrene sulfonate) (PSS), carboxymethyl cellulose (CMC), and polyaspartate (PAP). The adsorbed mass, extended layer thickness, and TCE-polyelectrolyte partition coefficient are measured and used to explain the effect of adsorbed polyelectrolyte on NZVI reactivity. For all modifiers, the dechlorination rate constant decreased nonlinearly with increasing surface excess, with a maximum of a 24-fold decrease in reactivity. The TCE dechlorination pathways were not affected. Consistent with Scheutjens-Fleer theory for homopolymer adsorption, the nonlinear relationship between the dechlorination rate and the surface excess of adsorbed polyelectrolyte suggests that adsorbed polyelectrolyte decreases reactivity primarily by blocking reactive surface sites at low surface excess where they adsorb relatively flat onto the NZVI surface, and by a combination of site blocking and decreasing the aqueous TCE concentration at the NZVI surface due to partitioning of TCE to adsorbed polyelectrolytes. This explanation is also consistent with the effect of adsorbed polyelectrolyte on acetylene formation. This conceptual model should apply to other medium and high molecular weight polymeric surface modifiers on nanoparticles, and potentially to adsorbed natural organic matter.
 ...
PMID:Adsorbed polyelectrolyte coatings decrease Fe(0) nanoparticle reactivity with TCE in water: conceptual model and mechanisms. 1935 Sep 27

Nanosized zerovalent iron (nZVI) is used for in situ remediation of contaminated groundwater. Polyelectrolyte surface coatings are used to inhibit nZVI aggregation and enhance mobility in the subsurface for emplacement. The fate of nZVI is of interest given the uncertainties regarding the effects of nanomaterials on the environment, and depends in part on the stability of these surface coatings against desorption and biodegradation. This study measured the rate and extent of desorption of polyelectrolyte coatings used to stabilize nZVI, including polyaspartate (PAP MW = 2.5 kg/mol and 10 kg/mol), carboxymethyl cellulose (CMC MW= 90 kg/nol and 700 kg/ mol), and polystyrene sulfonate (PSS MW = 70 kg/mol and 1000 kg/mol). The initial adsorbed mass of polyelectrolyte ranged from 0.85 to 3.71 mg/m2 depending on the type and molecular weight (MW). Polyelectrolyte adsorption was confirmed by an increase in nZVI electrophoretic mobility. In all cases, desorption of polyelectrolyte was slow, with less than 30 wt% desorbed after 4 months. The higher MW polyelectrolyte had a greater adsorbed mass and a slower desorption rate for PAP and CMC. nZVI mobility in sand columns after 8 month of desorption was similar to freshly modified nZVI, and significantly greater than unmodified nZVI aged for the same time under identical conditions. Based on these results, polyelectrolyte modified nanoparticles will remain more mobile than their unmodified counterparts even after-aging. Other factors potentially affecting the fate of coated nZVI must be evaluated, especially the potential for biodegradation of coatings.
 ...
PMID:Fe0 nanoparticles remain mobile in porous media after aging due to slow desorption of polymeric surface modifiers. 1954 94

The effect of particle concentration, size distribution (polydispersity) and magnetic attractive forces (Fe(0) content) on agglomeration and transport of poly(styrene sulfonate) (PSS) modified NZVI was studied in water-saturated sand (d(p) = 300 microm) columns. Particle concentrations ranged from 0.03 to 6 g/L in 5 mM NaCl/5 mM NaHCO3 at a pore water velocity of 3.2 x 10(-4) m/s. Three NZVI dispersions with different intrinsic particle size distributions obtained from sequential sedimentation are compared. The influence of magnetic attraction (Fe(0) content) on NZVI agglomeration and deposition in porous media is assessed by comparing the deposition behavior of PSS-modified NZVI (magnetic) having different Fe(0) contents with PSS-modified hematite (nonmagnetic) with the same surface modifier. At low particle concentration (30 mg/L) all particles were mobile in sand columns regardless of size or magnetic attractive forces. At high concentration (1 to 6 g/L), deposition of the relatively monodisperse dispersion containing PSS-modified NZVI (hydrodynamic radius (R(H)) = 24 nm) with the lowest Fe(0) content (4 wt%) is low (attachment efficiency (alpha) = 2.5 x 10(-3)), insensitive to particle concentration, and similar to PSS-modified hematite. At 1 to 6 g/L, the attachment efficiency of polydisperse dispersions containing both primary particles and sintered aggregates (R(H) from 15 to 260 nm) of PSS-modified NZVI with a range of Fe(0) content (10-60%) is greater (alpha = 1.2 x 10(-2) to 7.2 x 10(-2) and is sensitive to particle size distribution. The greater attachment for larger, more polydisperse Fe(0) nanoparticles with higher Fe(0) content is a result of their agglomeration during transport in porous media because the magnetic attractive force between particles increases with the sixth power of particle/agglomerate radius. A filtration model that considers agglomeration in porous media and subsequent deposition explains the observed transport of polydisperse PSS-modified NZVI at high concentration.
 ...
PMID:Particle size distribution, concentration, and magnetic attraction affect transport of polymer-modified Fe(0) nanoparticles in sand columns. 1967 10

Nanoscale zerovalent iron (NZVI) is used for groundwater remediation. Freshly synthesized bare, i.e. uncoated NZVI is bactericidal at low mg/L concentration, but the impact of surface modifiers and aging (partial oxidation) on its bactericidal properties have not been determined. Here we assess the effect that adsorbed synthetic polymers and natural organic matter (NOM) and aging (partial oxidation) have on the bactericidal properties of NZVI to the gram-negative bacterium, Escherichia coli. Exposure to 100 mg/L of bare NZVI with 28% Fe(0) content resulted in a 2.2-log inactivation after 10 min and a 5.2-log inactivation after 60 min. Adsorbed poly(styrene sulfonate) (PSS), poly(aspartate) (PAP), or NOM on NZVI with the same Fe(0) content significantly decreased its toxicity, causing less than 0.2-log inactivation after 60 min. TEM images and heteroaggregation studies indicate that bare NZVI adheres significantly to cells and that the adsorbed polyelectrolyte or NOM prevents adhesion, thereby decreasing NZVI toxicity. The 1.8-log inactivation observed for bare NZVI with 7% Fe(0) content was lower than the 5.2-log inactivation using NZVI with 28% Fe(0) after 1 h; however, the minimum inhibitory concentration (MIC) after 24 h was 5 mg/L regardless of Fe(0) content. The MIC of PSS, PAP, and NOM coated NZVI were much higher: 500 mg/L, 100 mg/L, and 100 mg/L, respectively. But the MIC was much lower than the typical injection concentration used in remediation (10 g/L). Complete oxidation of Fe(0) in NZVI under aerobic conditions eliminated its bactericidal effects. This study indicates that polyelectrolyte coatings and NOM will mitigate the toxicity of NZVI for exposure concentrations below 0.1 to 0.5 g/L depending on the coating and that aged NZVI without Fe(0) is relatively benign to bacteria.
 ...
PMID:Adsorbed polymer and NOM limits adhesion and toxicity of nano scale zerovalent iron to E. coli. 2035 3

We evaluate the potential in vitro cytotoxicity that may arise from metallic and magnetic DNA-templated nanostructures. By using a fluorescence-based assay, the viability of cells was examined after treatment with DNA-templated nanostructures. Inductively coupled plasma mass spectrometry (ICP-MS) was used to quantify the amount of nanoparticles internalized by the cells. Cell uptake of DNA-templated nanostructures was enhanced after encapsulating the nanostructure with layers of polyelectrolytes (PSS and PAH) and targeting ligands. Transmission electron microscope (TEM) images provided evidence that the nanostructures were localized in vesicles in the cytoplasm of the cells. The results from this study suggest that gold, iron oxide, and cobalt iron oxide DNA-templated nanostructures do not induce in vitro toxicity.
 ...
PMID:In vitro cytotoxic evaluation of metallic and magnetic DNA-templated nanostructures. 2042 63

Iron oxide nanoparticles, in the form of sub-100-nm clusters, were synthesized in the presence of poly(acrylic acid) (PAA) or poly(styrene sulfonate-alt-maleic acid) (PSS-alt-MA) to provide electrosteric stabilization. The superparamagnetic nanoclusters were characterized using a superconducting quantum interference device (SQUID), transmission electron microscopy (TEM), dynamic light scattering (DLS), thermogravimetric analysis (TGA), and zeta potential measurements. To anchor the polymer shell on the nanoparticle surface, the polymer was cross-linked for a range of cross-linking densities. For nanoclusters with only 12% (w/w) PSS-alt-MA, electrosteric stabilization was sufficient even in 8 wt % NaCl. For PAA, the cross-linked polymer shell was essentially permanent and did not desorb even upon dilution of the nanoparticles for iron oxide concentrations down to 0.014 wt %. Without cross-linking, over half of the polymer desorbed from the particle surfaces. This general approach of the adsorption of polymer stabilizers onto nanoparticles followed by cross-linking may be utilized for a wide variety of cross-linkable polymers without the need to form covalent bonds between the nanoparticles and polymer stabilizer. Thus, this cross-linking approach is an efficient and inexpensive method of stabilizing nanoparticles for large-scale applications, including the electromagnetic imaging of subsurface reservoirs, even at high salinity.
 ...
PMID:Stabilization of superparamagnetic iron oxide nanoclusters in concentrated brine with cross-linked polymer shells. 2172 68

Polymer coatings on nano-sized remediation agents and subsurface heterogeneity will affect their transport, likely in a pH-dependent manner. The effect of pH on the aggregation of polymer-coated nanoscale zerovalent iron (nZVI) and its deposition onto sand and clay (kaolinite) surfaces was studied. nZVI coatings included a high molecular weight (90 kg/mol) strong polyanion, poly(methacrylic acid)-b-(methy methacrylate)-b-(styrenesulfonate) (PMAA-PMMA-PSS) and a low molecular weight (2.5 kg/mol) weak polyanion, polyaspartate. Aggregation and deposition increased with decreasing pH for both polyelectrolytes. The extent was greater for the low MW polyaspartate coated nZVI. Enhanced deposition at lower pH was indicated because the elutability of polyaspartate-modified hematite (which did not aggregate) also decreased at lower pH. The greater deposition onto clay minerals compared to similar sized silica fines is attributed to charge heterogeneity on clay mineral surfaces, which is sensitive to pH. Heteroaggregation between kaolinite particles and nZVI over the pH range 6-8 confirmed this assertion. Excess unadsorbed polyelectrolyte in solution (100mg/L) enhanced the transport of modified nZVI by minimizing aggregation and deposition onto sand and clay. These results indicate that site physical and chemical heterogeneity must be considered when designing an nZVI emplacement strategy.
 ...
PMID:Effect of kaolinite, silica fines and pH on transport of polymer-modified zero valent iron nano-particles in heterogeneous porous media. 2228 71


1 2 3 Next >>