Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C1832588 (PSS)
 2,979 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The aim of this study was to develop new biocompatible coatings for bone implants by the alternating deposition of oppositely charged polyelectrolytes. Polyelectrolyte films were built up with different terminating layers on which SaOS-2 osteoblast-like cells and human periodontal ligament (PDL) cells were grown. The terminating layer was made of one of the following polyelectrolytes: poly(ethylene imine) (PEI), poly(sodium 4-styrenesulfonate) (PSS), poly(allylamine hydrochloride) (PAH), poly(L-glutamic acid) (PGA), or poly(L-lysine) (PLL). Cell adherence, viability, stability of osteoblast phenotype, and inflammatory response were studied. Adherence and viability were good on all terminating layers except the PEI-terminating layer, which was cytotoxic. Maintenance of osteoblast phenotype marker expression was observed on PSS- and PGA-terminating films for both cell types, whereas downregulation, associated with the induction of Interleukin-8 (IL-8) secretion, was detected on PEI and PAH for both cell types and on PLL for PDL cells. These results suggested a good biocompatibility of PSS- and PGA-ending films for PDL cells and of PSS-, PGA-, and PLL-terminating films for SaOS-2 cells. As a result, polyelectrolyte multilayer films could emerge as new alternatives for implant coatings.
 ...
PMID:Viability, adhesion, and bone phenotype of osteoblast-like cells on polyelectrolyte multilayer films. 1194 25

Endothelial cell seeding constitutes an appreciated method to improve blood compatibility of small-diameter vascular grafts. In this study, we report the development of a simple innovative technique based on multilayered polyelectrolyte films as cell adhesive substrates. Polyelectrolyte multilayered films ending by poly(sodium-4-styrenesulfonate)/poly(allylamine hydrochloride) (PSS/PAH) or poly(L-glutamic acid)/poly(D-lysine) (PGA/PDL) could enhance cell adhesion by modification of the physico-chemical properties of the surface. The biological responses of human umbilical vein endothelial cells seeded on the polyelectrolyte multilayer films, on PDL or PAH monolayers, and on control surfaces, were evaluated in terms of initial attachment, growth, cellular metabolic activity, endothelial phenotype, and adhesion. The results showed that polyelectrolyte multilayers neither induce cytotoxic effects nor alter the phenotype of the endothelial cells. The polyelectrolyte multilayered films enhanced initial cell attachment as compared to the polyelectrolyte monolayer. Cell growth observed on the films was similar to that on TCPS. Among the different coating tested, the film ending by PSS/PAH exhibited an excellent cellular biocompatibility and appeared to be the most interesting surface in terms of cellular adhesion and growth. Such films could be used to cover hydrophobic (cell resistant) substrates in order to promote cell colonization, thereby constituting an excellent material for endothelial cell seeding.
 ...
PMID:Endothelial cells grown on thin polyelectrolyte mutlilayered films: an evaluation of a new versatile surface modification. 1280 81

We studied in vitro cell-substrate interaction of motoneurons with functionalized polylectrolyte films. Thin polylectrolyte films were built on glass by alternating polycations, poly(ethylene-imine) PEI, poly(L-lysine) PLL, or poly(allylamine hydrochloride) PAH, and polyanions, poly(sodium-4-styrenesulfonate) PSS or poly(L-glutamic acid) (PGA). These architectures were functionalized with Brain Derived Neurotrophic Factor (BDNF) or Semaphorin 3A (Sema3A). We used Optical Waveguide Lightmode Spectroscopy (OWLS) and Atomic Force Microscopy (AFM) to characterize the architectures. The viability of motoneurons was estimated by the acid phosphatase method, and morphometrical measures were performed to analyse the influence of different architectures on cell morphology. Motoneurons appeared to adhere and spread on all the architectures tested and preferentially on PSS ending films. The viability of motoneurons on polyelectrolyte multilayers was higher compared to polyelectrolyte monolayers. BDNF and Sema3A embedded in the films remained active and thereby create functionalized nanofilms.
 ...
PMID:Effect of functionalization of multilayered polyelectrolyte films on motoneuron growth. 1527 62

Multilayer thin films formed by sequential deposition of oppositely charged polypeptides on a charged surface are known from previous studies to comprise a mixture of types of secondary structure. Here, study of the perturbation of polypeptide film structure by deposition of poly(allylamine hydrochloride) (PAH) and poly(styrenesulfonate) (PSS) on the film surface has revealed differences in behavior attributable to physical properties of the peptides. The methods of analysis were circular dichroism spectroscopy (CD), ultraviolet spectroscopy (UVS), and quartz crystal microbalance (QCM). Films made of poly(L-lysine) (PLL) and poly(L-glutamic acid) (PLGA) with an average charge per monomer of about 1 were substantially more susceptible to perturbation of structure than films made of designed polypeptides with an average charge per monomer of about 0.5, despite preparation under identical conditions. PLL-PLGA films showed loss or gain of material and change in secondary structure content on perturbation, whether made of high molecular mass (ca. 90 kDa) or low molecular mass (ca. 14 kDa) polymers. By contrast, films made of very low molecular mass (ca. 3.5 kDa) designed polypeptides showed little change in secondary structure content. The data suggest that the penetrability of PSS or PAH into a film and therefore film density can depend substantially on the polypeptides of which it is made and the character of intermolecular interactions.
 ...
PMID:Perturbation of nanoscale structure of polypeptide multilayer thin films. 1592 73

Multilayer assemblies of polyelectrolytes, for protein immobilization, have been created within the membrane pore domain. This approach was taken for two reasons: (1) the high internal membrane area can potentially increase the amount of immobilized protein, and (2) the use of convective flow allows uniform assembly of layers and eliminates diffusional limitations after immobilization. To build a stable assembly, the first polyelectrolyte layer was covalently attached to the membrane surface and inside the pore walls. Either poly(L-glutamic acid) (PLGA) or poly(L-lysine) (PLL) was used in this step. Subsequent deposition occurs by multiple electrostatic interactions between the adsorbing polyelectrolyte [poly(allylamine) hydrochloride (PAH) or poly(styrenesulfonate) (PSS)] and the oppositely charged layer. Three-layer membranes were created: PLL-PSS-PAH or PLGA-PAH-PSS, for an overall positive or negative charge, respectively. The overall charge on both the protein and membrane plays a substantial role in immobilization. When the protein and the membrane are oppositely charged, the amount immobilized and the stability within the polyelectrolyte assembly are significantly higher than for the case when both have similar charges. After protein incorporation in the multilayer assembly, the active site accessibility was comparable to that obtained in the homogeneous phase. This was tested by affinity interaction (avidin-biotin) and by carrying out two reactions (catalyzed by glucose oxidase and alkaline phosphatase). Besides simplicity and versatility, the ease of enzyme regeneration constitutes an additional benefit of this approach.
 ...
PMID:Layer-by-layer-assembled microfiltration membranes for biomolecule immobilization and enzymatic catalysis. 1710 8

Layer-by-layer (LBL) polyelectrolyte films offer extensive potentials to enhance surface properties of vascular biomaterials. From the time of implantation, PET prostheses are continuously subjected to multiple mechanical stresses such as important distorsions and blood pressure. In this study, three LBL films, namely (1) poly(sodium 4-styrenesulfonate)/poly(allylamine hydrochloride), (2) poly(L-lysine)/hyaluronan, and (3) poly(L-lysine)/poly(L-glutamic acid) were built on to isolated PET filaments, thread, and vascular prostheses. The three LBL films uniformly covered the surface of the PET samples with rough, totally smooth, and "wrinkled" appearances respectively for (PAH/PSS)(24), (PLL/HA)(24), and (PLL/PGA)(24) systems. We then assessed the behavior of these LBL films, in an aqueous environment [by environmental scanning electronic microscopy (ESEM)], when subjected to unidirectional longitudinal stretches. We found that stretching induces ruptures in the multilayer films on isolated filaments for longitudinal stretches of 14% for (PSS/PAH)(24), 13% for (PLL/PGA)(24), and 30% for (PLL/HA)(24) films. On threads, the rupture limit is enhanced to be respectively 26, 20, and 28%. Most interestingly, we found that on vascular prosthesis no rupture is visible in any of the three multilayers types, even for elongations of 200% (200% undergone by the PET prostheses is representative of those encountered during graft deployment) which by far exceeds elongations observed under physiological conditions (10-20%, blood pressure). In term of mechanical behaviors, these preliminary data constitute a first step toward the possible use of LBL film to coat and functionalize vascular prosthesis.
 ...
PMID:Characterization of polyelectrolyte multilayer films on polyethylene terephtalate vascular prostheses under mechanical stretching. 1761 82

Multilayer nanofilms, formed by the layer-by-layer (LbL) adsorption of positively and negatively charged polyelectrolytes, are promising substrates for tissue engineering. We investigate here the attachment and function of hepatic cells on multilayer films in terms of film composition, terminal layer, rigidity, charge, and presence of biofunctional species. Human hepatocellular carcinoma (HepG2) cells, adult rat hepatocytes (ARH), and human fetal hepatoblasts (HFHb) are studied on films composed of the polysaccharides chitosan (CHI) and alginate (ALG), the polypeptides poly(l-lysine) (PLL) and poly(l-glutamic acid) (PGA), and the synthetic polymers poly(allylamine hydrochloride) (PAH) and poly(styrene sulfonate) (PSS). The influence of chemical cross-linking following LbL assembly is also investigated. We find HepG2 to reach confluence after 7 days of culture on only 2 of 18 candidate multilayer systems: (PAH-PSS)(n) (i.e. nPAH-PSS bilayers) and cross-linked (PLL-ALG)(n)-PLL. Cross-linked PLL-ALG and PLL-PGA films support attachment and function of ARH, independently of the terminal layer, provided collagen is adsorbed to the top of the film. (PAH-PSS)(n), cross-linked (PLL-ALG)(n), and cross-linked (PLL-PGA)(n)-PLL films all support attachment, layer confluence, and function of HFHb, with the latter film promoting the greatest level of function at 8 days. Overall, film composition, terminal layer, and rigidity are key variables in promoting attachment and function of hepatic cells, while film charge and biofunctionality are somewhat less important. These studies reveal optimal candidate multilayer biomaterials for human liver tissue engineering applications.
 ...
PMID:Multilayer nanofilms as substrates for hepatocellular applications. 1865 30

Chiral polyelectrolyte multilayers (PEMs) consisting of poly(l-lysine) (PLL), poly(N-(S)alkylated 4-vinylpyridinium iodide), or poly(ethyleneimine maltose) (PEI-m) as polycations and poly(styrenesulfonic acid) sodium salt (PSS) or poly(vinyl sulfate) as polyanions, as well as a nonchiral PEM composed of poly(ethyleneimine) (PEI) and PSS were deposited on silicon substrates and poly(tetrafluoroethylene) membranes using the layer-by-layer method. For these PEMs, enantiospecific interaction toward one enantiomer of either l/d-glutamic acid (l/d-GLU), l/d-tryptophan, or l/d-ascorbic acid (l/d-ASC), respectively, was studied under variation of the concentration, pH, and ionic strength. Both deposition and enantiospecific interaction were analyzed by attenuated total reflection Fourier transform infrared spectroscopy. Our results show a significant enantiospecific preference of d-GLU over l-GLU at PEMs containing PLL and of d-ASC over l-ASC at PEMs containing PEI-m. No such enantiospecific preference was found for nonchiral PEMs containing PEI. The enantiospecificity of PEMs of PLL/PSS toward l/d-GLU could be significantly influenced by the ionic strength and pH values, so that increasing attractive electrostatic interactions resulted in higher enantiospecificity.
 ...
PMID:In situ ATR-FTIR investigation on the preparation and enantiospecificity of chiral polyelectrolyte multilayers. 2035 70

The aim of this work was to encapsulate the CdTe quantum dots within the nanocapsules that were prepared by the layer-by-layer adsorption of polyelectrolytes. Two different polyelectrolyte pairs were used as components of the shell: synthetic polycation poly(allyamine hydrochloride) (PAH), together with anionic poly(sodium styrene sulfonate) (PSS), and biocompatible cationic poly-L-lysine hydrobromide in a pair with biocompatible anionic poly-D-glutamic acid sodium salt (PGA). The saturation method was used for formation of consecutive layers on the initial CdTe-polyelectrolyte complex. A growth of the polyelectrolyte shell was followed with the electrophoretic mobility and light scattering measurements, in order to determine the zeta potential and the size of capsules, respectively. The fluorescent spectra of the quantum dots, which are embedded within the capsules, were characterized with spectrofluorimeter. Later on, they were deposited on a negatively charged mica surface and studied by the means of atomic force microscopy (AFM). In order to estimate the cytotoxicity of capsules, their influence on the B-lymphoblastoid cell line proliferation and on unspecific binding to the P-blood mononuclear cells was examined using the flow cytometry.
 ...
PMID:Polyelectrolyte multilayer capsules with quantum dots for biomedical applications. 2207 25

The adsorption behavior of neurotransmitter biomolecule, glutamate, on terminal poly-(allylamine)hydrochloride (PAH) polyelectrolyte multilayer is compared with its adsorption on a terminal poly(styrenesulfonate) (PSS) polyelectrolyte multilayer. Using X-ray and neutron reflectivity experiments, the internal structure of such a supramolecular film has been revealed with high resolution and the volume fraction of the adsorbed glutamate is determined. It has been shown that the glutamate binds only to the terminal PAH multilayer. Multiple attenuated total reflection infrared spectroscopy indicates that glutamate is electrostatically physisorbed on PAH surface in the zwitterionic form. Index matching neutron experiments have been done where the scattering length density of the solvent is varied, by changing the ratio of heavy water and light water, until it completely matches with that of the polyelectrolyte layer. The resulting absorption of the glutamic acid leads to changes in scattering profile which are analyzed and it is seen that the adsorption is restricted only to the surface layers. On the other hand, terminal poly(styrenesulfonate) multilayers show resistance toward glutamate. Such repulsion and adsorption between the neurotransmitter and polyelectrolytes could be potentially used in a variety of medicinal applications.
 ...
PMID:Selective self assembly of glutamate molecules on polyelectrolyte multilayers. 2242 18


1 2 Next >>