Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C1275122 (TEM)
 21,810 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

We report the first formation of arrays of InN nanorods inside the nanoscale channels of mesoporous silica SBA-15. In(NO3)3 dissolved in methanol was incorporated into SBA-15 powder without prior pore surface functionalization. Formation of InN nanorod arrays was carried out by ammonolysis at 700 degrees C for 8 h. The final products have been characterized by FT-IR spectra, (29)Si MAS NMR spectra, Raman spectra, XRD patterns, TEM images, nitrogen adsorption-desorption isotherm measurements, and optical spectroscopy. The freestanding InN nanorods observed after silica framework removal with HF solution show diameters of 6-7.5 nm and lengths of 25-50 nm. Formation of a trace amount of In2O3 was also verified. The InN nanorods exhibit a broad band centered at around 550-600 nm, and a band gap energy of 1.5 eV was determined. No light absorption in the near-IR region was measured. The nanorods give a weak emission band centered at around 600 nm. These optical properties are believed to be related to the possible incorporation of oxygen during InN nanorod synthesis.
 ...
PMID:Formation of indium nitride nanorods within mesoporous silica SBA-15. 1831 14

Efficient operation of a diode-pumped Nd:YAlO(3) laser on low-gain 1378- and 1385-nm transitions is reported for the first time, to our knowledge. A three-mirror folded cavity with a prism yielded a cw laser output power of 800 mW for an absorbed pump power of 11 W. The laser beam was TEM(00). We managed to eliminate the instabilities in the output power by purging the cavity of water vapor with nitrogen.
 ...
PMID:High-Power Continuous-Wave Diode-Pumped Nd:YAlO(3) Laser that Emits on Low-Gain 1378- and 1385-nm Transitions. 1835 20

The straightforward, efficient, solventless, RAPET (reactions under autogenic pressure at elevated temperature) approach was explored for the fabrication of core-shell nanomaterials. Carbon-encapsulated SnS and SnSe nanorods were synthesized by a one-step thermal decomposition of tetramethyltin in the presence of either S or Se powder in a closed reactor at 700 degrees C for 40 min, under their autogenic pressure in an inert atmosphere. The powder X-ray diffraction measurements provided structural evidence for the formation of pure orthorhombic phases of SnS or SnSe particles. The Raman spectroscopy measurements ensured that the nature of the coated carbon was semigraphitic. The scanning electron micrographs verified the 1D morphology of the formed SnS and SnSe chalcogenides, and their stoichiometry was confirmed by EDAX measurements. The HR-TEM micrographs distinguished between core and shell morphologies. The nitrogen gas adsorption on the surface of core-shell nanostructures was determined by BET surface area analysis. The plausible mechanism for the creation of chalcogenide cores (SnS or SnSe) with a carbon shell was elucidated.
 ...
PMID:Core-shell nanorods of SnS-C and SnSe-C: synthesis and characterization. 1836 19

In this study, nitrogen-doped titanium dioxide (TiO2) powders were synthesized in two ways: by heating of titanium hydroxide with urea and by direct hydrolysis of titanium tetraisopropoxide (TTIP) with ammonium hydroxide. The samples were characterized by structural (XRD), analytical (XPS), optical (UV/Vis absorption/reflection and Raman spectroscopy) and morphological (SEM, TEM) techniques. The characterization suggested that the doped materials have anatase crystalline form without any detectable peaks that correspond to dopants. The absorption threshold of titanium dioxide was moved in the visible range of optical spectrum from 3.2 eV to 2.20 eV. Particle sizes of synthesized powders were obtained from XRD measurements and from TEM data ranging from 6-20 nm. XPS and Raman spectroscopy were used for detection of nitrogen in doped samples.
 ...
PMID:TiO2 doped with nitrogen: synthesis and characterization. 1846 79

In this study, presents an innovative method for nanoparticle synthesis system for nanosized ZnO fabrication with powder or suspension type. The experimental device is primarily composed of a high frequency induction heating system, a pressure control system, a temperature control system and an automatic nanoparticle collection system. This study employs an automatic collection system with liquid nitrogen to condense and collect the nanoparticles. The influence of such process variables such as heating temperature and vacuum pressure are analyzed and compared through experimentation in order to identify the working conditions most conducive to the production of nanoparticles with smaller mean particle size. The prepared ZnO nanoparticles are characterized for nanostructural properties by the TEM and XRD. An Ultraviolet-Visible (UV-Vis) spectrophotometer is used to analyze the optical property of the nanoparticles. The ZnO nanofluid already has good dispersion, so even without dispersant, it can still remain in stable suspension for a fairly long time. Experimental results indicate that the particle size of produced ZnO nanoparticles is around 20 nm and with the production rate of 1.24 g/min.
 ...
PMID:Synthesis of nanosized ZnO by high frequency induction method. 1846 14

A versatile one-step pyrolysis method is successfully employed to fabricate hollow carbon nanospheres (HCNs, ca. 60 nm in diameter) supported with metallic nanoparticle catalyst. The resultant catalyst hybrid was characterized by using TEM, FTIR, TGA measurements. It is confirmed that, as the carbon precursor and hollow core/shell structure template, hollow chitosan nanospheres provide the important adsorption sites for the metallic precursor. The one-step pyrolysis process at 750 degrees C under nitrogen atmosphere results in the simultaneous decomposition of the chitosan nanospheres to HCNs and the adsorbed metal salt complex to metallic nanoparticles. It is found that metallic nanoparticles with an average diameter of ca. 4 nm highly dispersed in the carbon shell of HCNs, and no aggregation phenomenon occurs under the high deposition temperature. As a demonstration, the HCNs-supported Pt catalyst for the electrochemical methanol oxidation was studied.
 ...
PMID:Preparation and characterization of hollow carbon nanospheres supported metallic catalysts by using one-step pyrolysis method. 1846 83

A new carrier matrix for nanoemulsion drug delivery was synthesized from glycine as the raw material, using mesoporous/microporous electron rich carbon-silica composite surface (MAC(800)). MAC(800) was prepared from rice husk in two-stage carbonization. The surface area, pore volume, and pore size distribution of MAC(800) were measured, using nitrogen adsorption isotherms at 77K. The unpaired electron density of MAC(800) was measured in electron spin resonance spectroscopy (ESR), using TEMPOL (4-hydroxy-2,2,6,6-tetramethyl piperidine-1-oxyl) as the reference spin probe. Glycine was converted into ketene at the surface of MAC(800), which further underwent radical polymerization to form a low molecular weight ketene polymer (LMKP) of ester structure. The structure and the properties of LMKP were confirmed through (13)C, (1)H and DEPT nuclear magnetic resonance (NMR) spectroscopy, attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) and size exclusion chromatography (SEC). The two hydrophilic drugs namely ciprofloxacin hydrochloride (CPH) and gentamicin sulphate (GS) were chosen for the nanoemulsion preparation and characterization. They were characterized for morphology, interaction of drugs with the polymer and their crystallinity, using HR-TEM, DSC and XRD, respectively. The encapsulation efficiency of the LMKP towards the drugs ciprofloxacin hydrochloride and gentamicin sulphate were 26% and 12%, respectively. The dissolution studies of the nanoemulsion were carried out for the pH 6.5, 7.4 and 8.0. The cytocompatibility studies were done for LMKP as well as nanoemulsion using Hep2 epithelial cells.
 ...
PMID:Nanoemulsion drug delivery by ketene based polyester synthesized using electron rich carbon/silica composite surface. 1856 42

Depleted uranium (DU) is a kind of radioactive heavy metal which can enter into the body via inhalation (aerosols), ingestion (drinking and eating) and wounds (embedded), and causes chemical and/or radiation-induced toxicities. In this study, male Sprague Dawley rats were surgically implanted in gastrocnemius muscle with DU fragments at three dose levels (low-dose, medium-dose and high-dose), with biologically inert tantalum (Ta) fragments served as controls. At 1 day, 7 days, and 3, 6, and 12 months after implantation, the rats were euthanized and tissue samples were collected, and uranium levels were measured in a variety of tissues by inductively coupled plasma-mass spectrometry (ICP-MS) to analyze the dynamic changes and distribution of uranium in rats. Thereafter, at 3, 6 and 12 months after implantation, the rats were euthanized after the collection of 24 h urine, blood and kidney samples were collected for analysis of DU-induced renal histopathologic changes and renal dysfunction. It was observed that DU concentrations in all the DU implanted groups were higher than that in Ta control group, and DU concentrations in the kidney increased with the implanted times, peaked at the 90 days after implantation, with a high correlation to the implanted DU doses, and then began to decrease gradually and slowly, and the DU concentrations in kidney still maintained at a relatively high level even at the 360 days after implantation. Otherwise, chronic DU contamination could induce the pathological changes of renal glomeruli, tubules and mesenchyme, such as interstitial fibrosis, enlarged interstice of renal tubular epithelial cells, tumefactions and necrosis of epithelial cells, shrinkage and disappearance of cavity of Bowman's capsule. By TEM, it was shown that the basement membrane of glomerulus was incrassated, mitochondrial of kidney proximal tubule had visible tumefaction and became bigger, and the mitochondrial cristae became shorter and disorderly in alignment. Compared to the control group, it was found that there was significant increase in the DU implantation group in terms of their blood urea nitrogen (BUN) and serum creatinine, urinary beta2-microglobulin (beta2-MG) and albumin, with a high correlation to the implanted DU dosage and periods. It was concluded that DU could accumulate in kidneys for a long period, and causes kidney injury by the toxic chemical/radioactive action such as renal dysfunction and structural damage.
 ...
PMID:Renal dysfunction induced by long-term exposure to depleted uranium in rats. 1859 94

Nanoparticles of Zn1-xCuxS with Cu concentrations of x=0.0, 0.1, 0.2, 0.3 and 0.4 were prepared by a co-precipitation reaction method from homogeneous solutions of zinc and copper salts. Both the ZnS and ZnS:Cu nanoparticles excited at about 370 nm exhibits a broad green emission band peaking around 491 nm, which confirms the characteristic feature of Zn2+ as well as Cu2+ ions as luminescent centers in the lattice. The TEM micrographs showed spherical morphology for ZnS nanocrystals and the average size of the particles was estimated to be around 8.5 nm. At liquid nitrogen temperature, ESR signal characteristic of Cu2+ ions was observed in samples of all concentrations. ESR spectra analysis also indicated that Cu2+ ions enter the host lattice by replacing Zn2+ ions with distorted tetrahedral site symmetry.
 ...
PMID:ESR and photoluminescence properties of Cu doped ZnS nanoparticles. 1860 63

The phase transition phenomena of Ge2Sb2Te5 chalcogenides were investigated by in situ dynamic high-resolution transmission electron microscopy (HR-TEM) and electron energy loss spectroscopy (EELS). A 300kV field emission TEM and a 1250kV high voltage TEM were employed for the in situ heating experiments from 20 to 500 degrees C for undoped and 3wt% nitrogen-doped Ge2Sb2Te5 thin films deposited by DC sputtering. Crystallization of amorphous Ge2Sb2Te5 to its cubic structure phase started at 130 degrees C and then rapid crystal growth developed from cubic to hexagonal phase in the range of 130-350 degrees C; finally, the hexagonal crystals started to melt at 500 degrees C. For nitrogen-doped Ge2Sb2Te5, its crystallization from amorphous film occurred at higher temperature of ca. 200 degrees C, and the cubic and hexagonal phases were usually formed simultaneously without significant growth of crystals at further heating to 400 degrees C. EELS measurements showed that the electronic structures of Ge, Sb and Te stayed almost the same regardless of the amorphous, FCC and hexagonal phases. The nitrogen doped in Ge2Sb2Te5 was confirmed to exist as a nitride. Also, the doped nitrogen distributed homogeneously in both amorphous and crystalline phases. Localization of doped nitrogen was not found in the grain boundary of crystallized phases. The dynamic process of phase transition was enhanced by high-energy electron irradiation. Peeling of atomic layers in nitrogen-doped Ge2Sb2Te5 film was detected during heating assisted with electron beam irradiation.
 ...
PMID:In situ dynamic HR-TEM and EELS study on phase transitions of Ge2Sb2Te5 chalcogenides. 1865 7


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>