Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0920652 (skin irritant)
 188 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Literature from the first half of this century report concern for toxicity from topical use of boric acid, but assessment of percutaneous absorption has been impaired by lack of analytical sensitivity. Analytical methods in this study included inductively coupled plasma-mass spectrometry which now allows quantitation of percutaneous absorption of 10B in 10B-enriched boric acid, borax, and disodium octaborate tetrahydrate (DOT) in biological matrices. This made it possible, in the presence of comparatively large natural dietary boron intakes for the in vivo segment of this study, to quantify the boron passing through skin. Human volunteers were dosed with 10B-enriched boric acid, 5.0%, borax, 5.0%, or disodium octaborate tetrahydrate, 10%, in aqueous solutions. Urinalysis, for boron and changes in boron isotope ratios, was used to measure absorption. Boric acid in vivo percutaneous absorption was 0.226 (SD = 0.125) mean percentage dose, with flux and permeability constant (Kp) calculated at 0.009 microgram/cm2/h and 1.9 x 10(-7) cm/h, respectively. Borax absorption was 0.210 (SD = 0.194) mean percentage of dose, with flux and Kp calculated at 0.009 microgram/cm2/h and 1.8 x 10(-7) cm/h, respectively. DOT absorption was 0.122 (SD = 0.108) mean percentage, with flux and Kp calculated at 0.01 microgram/cm2/h and 1.0 x 10(-7) cm/h, respectively. Pretreatment with the potential skin irritant 2% sodium lauryl sulfate had no effect on boron skin absorption. In vitro human skin percentage of doses of boric acid absorbed were 1.2 for a 0.05% solution, 0.28 for a 0.5% solution, and 0.70 for a 5.0% solution. These absorption amounts translated into flux values of, respectively, 0.25, 0.58, and 14.58 micrograms/cm2/h and permeability constants (Kp) of 5.0 x 10(-4), 1.2 x 10(-4), and 2.9 x 10(-4) cm/h for the 0.05, 0.5, and 5.0% solutions. The above in vitro doses were at infinite, 1000 microliters/cm2 volume. At 2 microliters/cm2 (the in vivo dosing volume), flux decreased some 200-fold to 0.07 microgram/cm2/h and Kp of 1.4 x 10(-6) cm/h, while percentage of dose absorbed was 1.75%. Borax dosed at 5.0%/1000 microliters/cm2 had 0.41% dose absorbed, flux at 8.5 micrograms/cm2/h, and Kp was 1.7 x 10(-4) cm/h. Disodium octaborate tetrahydrate (DOT) dosed at 10%/1000 microliters/cm2 was 0.19% dose absorbed, flux at 7.9 micrograms/cm2/h, and Kp was 0.8 x 10(-4) cm/h. These in vitro results from infinite doses (1000 microliters/cm2) were 1000-fold greater than those obtained in the companion in vivo study. The results from the finite (2 microliters/cm2) dosing were closer (10-fold difference) to the in vivo results. General application of infinite dose percutaneous absorption values for risk assessment is questioned by these results. These in vivo results show that percutaneous absorption of boron, as boric acid, borax, and disodium octaborate tetrahydrate, through intact human skin, is low and is significantly less than the average daily dietary intake. This very low boron skin absorption makes it apparent that, for the borates tested, the use of gloves to prevent systemic uptake is unnecessary. These findings do not apply to abraded or otherwise damaged skin.
 ...
PMID:In vivo percutaneous absorption of boric acid, borax, and disodium octaborate tetrahydrate in humans compared to in vitro absorption in human skin from infinite and finite doses. 984 9

Literature from the first half of this century reports concern for toxicity from topical use of boric acid, but assessment of percutaneous absorption has been impaired by lack of analytical sensitivity. Analytical methods in this study included inductively coupled plasma-mass spectrometry, which now allows quantitation of percutaneous absorption of 10B in 10B-enriched boric acid, borax, and disodium octaborate tetrahydrate (DOT) in biological matrices. This made it possible, in the presence of comparatively large natural dietary boron intakes for the in vivo segment of this study, to quantify the boron passing through skin. Human volunteers were dosed with 10B-enriched boric acid, 5.0%, borax, 5.0%, or disodium octaborate tetrahydrate, 10% in aqueous solutions. Urinalysis, for boron and changes in boron isotope ratios, was used to measure absorption. Boric acid in vivo percutaneous absorption was 0.226 (SD = 0.125) mean percent dose, with flux and permeability constant (Kp) calculated at 0.009 microg/cm2/h and 1.9 x 10(-7) cm/h, respectively. Borax absorption was 0.210 (SD = 0.194) mean percent dose, with flux and Kp calculated at 0.009 microg/cm2/h and 1.8 x 10(-7) cm/h, respectively. DOT absorption was 0.122 (SD = 0.108) mean percent, with flux and Kp calculated at 0.01 microg/cm2/h and 1.0 x 10(-7) cm/h, respectively. Pretreatment with the potential skin irritant 2% sodium lauryl sulfate had no effect on boron skin absorption. These in vivo results show that percutaneous absorption of boron, as boric acid, borax, and disodium octaborate tetrahydrate, through intact human skin is low and is significantly less than the average daily dietary intake. This very low boron skin absorption makes it apparent that, for the borates tested, the use of gloves to prevent systemic uptake is unnecessary. These findings do not apply to abraded or otherwise damaged skin.
 ...
PMID:In vivo percutaneous absorption of boron as boric acid, borax, and disodium octaborate tetrahydrate in humans: a summary. 1005 Sep 12

The main goal of the present study was to investigate the response of the human skin equivalent Apligraf in vitro to the application of irritant substances and its predictivity as a screening tool for cumulative skin irritant potential in humans. Vaseline, calcipotriol, trans-retinoic acid, and sodium lauryl sulfate were applied to Apligraf in vitro for 24 h. Cell viability (lactate dehydrogenase leakage), release and mRNA expression of the proinflammatory cytokines IL-1alpha and IL-8, and morphological changes were assessed. The same products were applied to 30 healthy volunteers in a double-blind, randomized, vehicle-controlled within-subject study. The skin reactions after repeated 24-h applications over 3 weeks under Finn chamber patches were monitored by visual scoring and biophysical methods (trans-epidermal water loss, chromametry, and blood flow). Sodium lauryl sulfate was cytotoxic to Apligraf, and increased the release and expression of cytokines at low (0.2%, 0. 4%), but not at high (0.8%, 1%) concentrations. It induced severe irritancy in vivo. Trans-retinoic acid increased the expression and release of cytokines with no detectable cytotoxicity and showed moderate irritancy in humans. Although calcipotriol did neither affect cell viability nor the production of cytokines, it induced morphological signs of irritation and was mildly irritant for healthy volunteers. Vaseline was innocuous in vivo and induced no changes in Apligraf. In conclusion, the cumulative skin irritation potential of the tested products could be predicted with Apligraf in a sensitive and specific manner, by monitoring cytotoxicity, proinflammatory cytokines, and morphological changes.
 ...
PMID:Use of human skin equivalent Apligraf for in vitro assessment of cumulative skin irritation potential of topical products. 1073 42

It has been reported previously that in vitro treatment of human blood derived dendritic cells (DC) with contact allergens provokes the elevated expression of mRNA for interleukin (IL) 1beta, under conditions where similar treatment of cells with the non-sensitizing skin irritant sodium lauryl sulfate (SLS) did not alter IL-1beta mRNA levels (Reutter et al., 1997). The purpose of the present investigation was to evaluate further this phenomenon and to explore the potential utility of this approach for the purpose of skin sensitization testing. Human peripheral blood progenitor cells prepared from healthy adult volunteers were cultured in the presence of IL-4 and granulocyte/macrophage colony stimulating factor. After 5 days of culture, the majority of cells had a Langerhans cell-like phenotype, with characteristic dendritic morphology and cell surface expression of CD83, major histocompatibility complex class II and CD1a determinants. These blood-derived DC were cultured in the presence of the contact allergen 2,4-dinitrofluorobenzene (DNFB), SLS or vehicle alone and mRNA expression for IL-1beta, IL-6 and IL-18 was analysed by semiquantitative reverse transcriptase polymerase chain reaction. Constitutive expression of all three cytokines was observed for DC isolated from all donors examined. Exposure to DNFB resulted in upregulation of IL-1beta mRNA (two- to threefold) in cells derived from three out of eight donors whereas IL-6 and IL-18 were largely unaffected by allergen exposure. In contrast, SLS treatment did not induce IL-1beta mRNA expression in any of the donors investigated. Analysis of cytokine mRNA expression using the protocol described by Reutter et al. (1997), did not increase the sensitivity of measurement of induced cytokine expression. Although selected upregulation of IL-1beta by blood derived DC has been confirmed, a wider range of contact allergens and irritants need to be assessed before this approach could be considered for hazard identification.
 ...
PMID:Investigation of induced changes in interleukin 1beta mRNA expression by cultured human dendritic cells as an in vitro approach to skin sensitization testing. 1090 42

There is a need to investigate the mechanistic basis of the human skin irritation response if relevant in vitro test systems for the predictive identification of skin irritation hazards are to be developed. Recent progress in genomics technologies mean that tools for the identification and investigation of important biochemical events in the processes of skin irritation are now available. The aim of this work was to identify genes (for further mechanistic investigation) which may be regulated in response to skin irritation, following exposure of the EpiDerm skin model to the known skin irritant sodium lauryl sulphate (SLS). EpiDerm cultures were treated in triplicate with a non-cytotoxic dose of SLS (0.1 mg/ml, as determined by the MTT assay and histological examination) for 15 min, 30 min, 1 h, 2 h, 3 h, 4 h and 24 h. Total RNA was extracted from the pooled EpiDerm cultures and used to probe Atlas human arrays (Clontech) covering approximately 3600 genes. Preliminary data indicated an up-regulation at early time points (15-30 min) of a number of genes involved in transportation (e.g. the sodium and chloride dependent taurine transporter) and receptors (e.g. ZAP70 and protocadherin 42 precursor). The gene encoding the UV excision repair protein and other DNA repair genes (e.g. DNA-directed RNA polymerase II) were up-regulated after 1-3 h, along with TGF beta 3 and other tumour suppressors, which play a role in cellular development and wound healing. At the later time points of 4-24 h, genes involved in protein translation (e.g. Cathepsin D receptor) and metabolism (e.g. CYP27A) were up-regulated. In addition, a number of genes were down-regulated in response to treatment with SLS, although these followed less of a time dependent pattern. These results indicate the differential regulation of a number of genes in response to treatment with SLS, some of which may provide additional clues to the molecular events underpinning the irritation response to this particular surfactant and possibly to other chemical irritants.
 ...
PMID:Gene expression analysis of EpiDerm following exposure to SLS using cDNA microarrays. 1156 69

One of the in vitro models involved in an ECVAM-sponsored prevalidation study for acute skin irritation is the skin integrity function test (SIFT), which utilises full-thickness mouse skin. We have evaluated nine different skin types in order to identify the most useful model for assessing skin barrier function using transepidermal water loss (TEWL), electrical resistance (ER) and tritiated water flux (TWF) and sodium lauryl sulphate (SLS) as a standard skin irritant. Tissues were: human skin (epidermis and whole), reconstituted human epidermis (RHE), pig (dermatomed and whole), rabbit (whole), rat (epidermis and whole) and mouse (whole). Barrier function was measured following sodium lauryl sulphate (SLS) exposure and expressed as a damage ratio. Human epidermis gave good responses at high doses of SLS only. RHE had abnormally high permeability to water and therefore had little or no response to SLS. Pig skin gave low TEWL ratios and rabbit skin was a poor responder to SLS. Mouse whole skin performed best in this study, giving consistent high damage ratios to TEWL, ER and TWF following SLS treatment. Rat whole skin also performed well but was generally less responsive. We conclude that mouse skin is the best and most practical in vitro model for the SIFT approach for skin irritation prediction.
 ...
PMID:Comparison of tissue sources for the skin integrity function test (SIFT). 1156 97

These inorganic polyphosphate salts all function as chelating agents in cosmetic formulations. In addition, Sodium Metaphosphate functions as an oral care agent, Sodium Trimetaphosphate as a buffering agent, and Sodium Hexametaphosphate as a corrosion inhibitor. Only Sodium Hexametaphosphate is currently reported to be used. Although the typical concentrations historically have been less than 1%, higher concentrations have been used in products such as bath oils, which are diluted during normal use. Sodium Metaphosphate is the general term for any polyphosphate salt with four or more phosphate units. The four-phosphate unit version is cyclic, others are straight chains. The hexametaphosphate is the specific six-chain length form. The trimetaphosphate structure is cyclic. Rats fed 10% Sodium Trimetaphosphate for a month exhibited transient tubular necrosis; rats given 10% Sodium Metaphosphate had retarded growth and those fed 10% Sodium Hexametaphosphate had pale and swollen kidneys. In chronic studies using animals, growth inhibition, increased kidney weights (with calcium deposition and desquamation), bone decalcification, parathyroid hypertrophy and hyperplasia, inorganic phosphaturia, hepatic focal necrosis, and muscle fiber size alterations. Sodium Hexametaphosphate was a severe skin irritant in rabbits, whereas a 0.2% solution was only mildly irritating. A similar pattern was seen with ocular toxicity. These ingredients were not genotoxic in bacterial systems nor were they carcinogenic in rats. No reproductive or developmental toxicity was seen in studies using rats exposed to Sodium Hexametaphosphate or Sodium Trimetaphosphate. In clinical testing, irritation is seen as a function of concentration; concentrations as high as 1% produced no irritation in contact allergy patients. Because of the corrosive nature of Sodium Hexametaphosphate, it was concluded that these ingredients could be used safely if each formulation was prepared to avoid skin irritation; for example, low concentration in a leave-on product or dilution of a higher concentration as part of product usage.
 ...
PMID:Final report on the safety assessment of Sodium Metaphosphate, Sodium Trimetaphosphate, and Sodium Hexametaphosphate. 1176 35

Tumor necrosis factor-alpha (TNF-alpha), interleukin (IL)-1beta, and IL-18 are all known to contribute to the regulation of epidermal Langerhans cells (LC) migration and the subsequent accumulation of dendritic cells (DC) in draining lymph nodes following skin sensitization. However, the cytokine signals that control these responses following skin irritation have yet to be defined. We demonstrate that IL-1alpha, a cytokine associated with skin injury and inflammation, is able to stimulate the activation and migration from the epidermis of LC and their subsequent accumulation in skin-draining lymph nodes. Stimulation of these responses by IL-1alpha required the local availability of TNF-alpha. Using specific neutralizing antibodies, LC migration induced following skin sensitization with oxazolone (Ox) was found to be dependent upon IL-1beta and independent of a requirement for IL-1alpha. However, the converse was true following stimulation of responses with the nonsensitizing skin irritant sodium lauryl sulfate (SLS). Here, the loss of LC from the epidermis and the accumulation of DC in draining lymph nodes required IL-1alpha and not IL-1beta. Despite utilizing different IL-1 isoforms for LC mobilization, the phenotypic characteristics of DC arriving in draining lymph nodes in response to Ox and SLS were similar with respect to the membrane determinants MHC class II, B7-1, B7-2, and intercellular adhesion molecule-1. These data suggest that contact sensitization and skin irritation employ subtly different cytokine networks in the regulation of LC migration, both involving TNF-alpha but demonstrating differential requirements for IL-1 cytokines. The proposal is that different forms of cutaneous trauma may achieve LC migration through distinct molecular mechanisms.
 ...
PMID:Differential regulation of epidermal langerhans cell migration by interleukins (IL)-1alpha and IL-1beta during irritant- and allergen-induced cutaneous immune responses. 1214 Jan 76

This report reviews the safety of Aluminum, Calcium, Lithium Magnesium, Lithium Magnesium Sodium, Magnesium Aluminum, Magnesium, Sodium Magnesium, and Zirconium Silicates, Magnesium Trisilicate, Attapulgite, Bentonite, Fuller's Earth, Hectorite, Kaolin, Montmorillonite, Pyrophyllite, and Zeolite as used in cosmetic formulations. The common aspect of all these claylike ingredients is that they contain silicon, oxygen, and one or more metals. Many silicates occur naturally and are mined; yet others are produced synthetically. Typical cosmetic uses of silicates include abrasive, opacifying agent, viscosity-increasing agent, anticaking agent, emulsion stabilizer, binder, and suspending agent. Clay silicates (silicates containing water in their structure) primarily function as adsorbents, opacifiers, and viscosity-increasing agents. Pyrophyllite is also used as a colorant. The International Agency for Research on Cancer has ruled Attapulgite fibers >5 microm as possibly carcinogenic to humans, but fibers <5 microm were not classified as to their carcinogenicity to humans. Likewise, Clinoptilolite, Phillipsite, Mordenite, Nonfibrous Japanese Zeolite, and synthetic Zeolites were not classified as to their carcinogenicity to humans. These ingredients are not significantly toxic in oral acute or short-term oral or parenteral toxicity studies in animals. Inhalation toxicity, however, is readily demonstrated in animals. Particle size, fibrogenicity, concentration, and mineral composition had the greatest effect on toxicity. Larger particle size and longer and wider fibers cause more adverse effects. Magnesium Aluminum Silicate was a weak primary skin irritant in rabbits and had no cumulative skin irritation in guinea pigs. No gross effects were reported in any of these studies. Sodium Magnesium Silicate had no primary skin irritation in rabbits and had no cumulative skin irritation in guinea pigs. Hectorite was nonirritating to the skin of rabbits in a Draize primary skin irritation study. Magnesium Aluminum Silicate and Sodium Magnesium Silicate caused minimal eye irritation in a Draize eye irritation test. Bentonite caused severe iritis after injection into the anterior chamber of the eyes of rabbits and when injected intralamellarly, widespread corneal infiltrates and retrocorneal membranes were recorded. In a primary eye irritation study in rabbits, Hectorite was moderately irritating without washing and practically nonirritating to the eye with a washout. Rats tolerated a single dose of Zeolite A without any adverse reaction in the eye. Calcium Silicate had no discernible effect on nidation or on maternal or fetal survival in rabbits. Magnesium Aluminum Silicate had neither a teratogenic nor adverse effects on the mouse fetus. Female rats receiving a 20% Kaolin diet exhibited maternal anemia but no significant reduction in birth weight of the pups was recorded. Type A Zeolite produced no adverse effects on the dam, embryo, or fetus in either rats or rabbits at any dose level. Clinoptilolite had no effect on female rat reproductive performance. These ingredients were not genotoxic in the Ames bacterial test system. In primary hepatocyte cultures, the addition of Attapulgite had no significant unscheduled DNA synthesis. Attapulgite did cause significant increases in unscheduled DNA synthesis in rat pleural mesothelial cells, but no significant increase in sister chromosome exchanges were seen. Zeolite particles (<10 microm) produced statistically significant increase in the percentage of aberrant metaphases in human peripheral blood lymphocytes and cells collected by peritoneal lavage from exposed mice. Topical application of Magnesium Aluminum Silicate to human skin daily for 1 week produced no adverse effects. Occupational exposure to mineral dusts has been studied extensively. Fibrosis and pneumoconiosis have been documented in workers involved in the mining and processing of Aluminum Silicate, Calcium Silicate, Zirconium Silicate, Fuller's Earth, Kaolin, Montmorillonite, Pyrophyllite, and Zeolite. The Cosmetic Ingredient Review (CIR. The Cosmetic Ingredient Review (CIR) Expert Panel concluded that the extensive pulmonary damage in humans was the result of direct occupational inhalation of the dusts and noted that lesions seen in animals were affected by particle size, fiber length, and concentration. The Panel considers that most of the formulations are not respirable and of the preparations that are respirable, the concentration of the ingredient is very low. Even so, the Panel considered that any spray containing these solids should be formulated to minimize their inhalation. With this admonition to the cosmetics industry, the CIR Expert Panel concluded that these ingredients are safe as currently used in cosmetic formulations. The Panel did note that the cosmetic ingredient, Talc, is a hydrated magnesium silicate. Because it has a unique crystalline structure that differs from ingredients addressed in this safety assessment, Talc is not included in this report.
 ...
PMID:Final report on the safety assessment of aluminum silicate, calcium silicate, magnesium aluminum silicate, magnesium silicate, magnesium trisilicate, sodium magnesium silicate, zirconium silicate, attapulgite, bentonite, Fuller's earth, hectorite, kaolin, lithium magnesium silicate, lithium magnesium sodium silicate, montmorillonite, pyrophyllite, and zeolite. 1285 Nov 64

Potassium Silicate, Sodium Metasilicate, and Sodium Silicate combine metal cations with silica to form inorganic salts used as corrosion inhibitors in cosmetics. Sodium Metasilicate also functions as a chelating agent and Sodium Silicate as a buffering and pH adjuster. Sodium Metasilicate is currently used in 168 formulations at concentrations ranging from 13% to 18%. Sodium Silicate is currently used in 24 formulations at concentrations ranging from 0.3% to 55%. Potassium Silicate and Sodium Silicate have been reported as being used in industrial cleaners and detergents. Sodium Metasilicate is a GRAS (generally regarded as safe) food ingredient. Aqueous solutions of Sodium Silicate species are a part of a chemical continuum of silicates based on an equilibrium of alkali, water, and silica. pH determines the solubility of silica and, together with concentration, determines the degree of polymerization. Sodium Silicate administered orally is readily absorbed from the alimentary canal and excreted in the urine. The toxicity of these silicates has been related to the molar ratio of SiO2/Na2O and the concentration being used. The Sodium Metasilicate acute oral LD50 ranged from 847 mg/kg in male rats to 1349.3 mg/kg in female rats and from 770 mg/kg in female mice to 820 mg/kg in male mice. Gross lesions of variable severity were found in the oral cavity, pharynx, esophagus, stomach, larynx, lungs, and kidneys of dogs receiving 0.25 g/kg or more of a commercial detergent containing Sodium Metasilicate; similar lesions were also seen in pigs administered the same detergent and dose. Male rats orally administered 464 mg/kg of a 20% solution containing either 2.0 or 2.4 to 1.0 ratio of sodium oxide showed no signs of toxicity, whereas doses of 1000 and 2150 mg/kg produced gasping, dypsnea, and acute depression. Dogs fed 2.4 g/kg/day of Sodium Silicate for 4 weeks had gross renal lesions but no impairment of renal function. Dermal irritation of Potassium Silicate, Sodium Metasilicate, and Sodium Silicate ranged from negligible to severe, depending on the species tested and the molar ratio and concentration tested. Sodium Metasilicate was negative in the local lymph node assay (LLNA), but a delayed-type hypersensitivity response was observed in mice. Potassium Silicate was nonirritating in two acute eye irritation studies in rabbits. Sodium Metasilicate (42.4% H2O) was corrosive to the rabbit eye. Sodium Silicate was a severe eye irritant in some eye irritation studies, but was irritating or nonirritating in others. A skin freshener containing Sodium Silicate was nonirritating. Sodium Metasilicate was nonmutagenic in bacterial cells. Rats given Sodium Silicate (600 and 1200 ppm of added silica) in the drinking water in reproductive studies produced a reduced number of offspring: to 67% of controls at 600 ppm and to 80% of controls at 1200 ppm. Three adult rats injected intratesticularly and subcutaneously with 0.8 mM/kg of Sodium Silicate showed no morphological changes in the testes and no effect on the residual spermatozoa in the ductus deferens. Sodium Metasilicate (37% in a detergent) mixed with water was a severe skin irritant when tested on intact and abraded human skin, but 6%, 7%, and 13% Sodium Silicate were negligible skin irritants to intact and abraded human skin. Sodium Silicate (10% of a 40% aqueous solution) was negative in a repeat-insult predictive patch test in humans. The same aqueous solution of Sodium Silicate was considered a mild irritant under normal use conditions in a study of cumulative irritant properties. The Cosmetic Ingredient Review (CIR) Expert Panel recognized the irritation potential of these ingredients, especially in leave-on products. However, because these ingredients have limited dermal absorption and Sodium Metasilicate is a GRAS direct food substance, the Panel deemed the ingredients safe for use in cosmetic products in the practices of use and concentration described in this safety assessment, when formulated to avoid irritation.
 ...
PMID:Final report on the safety assessment of potassium silicate, sodium metasilicate, and sodium silicate. 1598 34


<< Previous 1 2 3 4 Next >>