Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0851184 (thinning)
 11,252 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

beta-Aminopropionitrile (beta APN), a peptide found in leguminous plants, is a multifunctional aminonitrile because it has some action on collagen, elastin, and nervous cells. Due to its action on the nervous system, it is very interesting to show its inhibitory effect on cultures of neurons. In the present study, we have demonstrated that beta APN can produce progressive degeneration of neurons and that this effect is dose-dependant. Neuronal cultures were prepared from 14-day-old rat embryos with a cell density of 10(4) cells/cm2 in the control plates. Progressive concentrations of beta APN (from 10(-7) M to 10(-3) M) were added and a 50 Inhibitory Dose (ID50) of 10(-5) M was found. At concentrations of 10(-5) M of beta APN, the neurons showed a loss of synapsis and thinning of neuronal prolongations. Based on the morphological changes observed, we think that beta APN may be used as a neurodegeneration model similar to that obtained with acrylamide, carbon disulfide, beta-beta'-iminodipropionitrile, or aluminum salts.
 ...
PMID:In vitro neuronal changes induced by beta-aminopropionitrile. 765 35

The surgical treatment of internal derangements of the temporomandibular joint (TMJ) often involves disc removal. Alloplastic interpositional implants for disc replacement have been widely used to avoid the development of osteoarthritic changes in the TMJ. This study reports the in vivo wear characteristics of Proplast-Teflon (Vitek Inc, Houston, TX) interpositional implants (PTIPI) in 12 patients who had their implants for 13 to 71 (mean 54.6 +/- 5.8 SEM) months. In all cases, changes in the condyle and fossa were found resulting from resorption and replacement of the articulating bone by granulomatous tissue. All implants showed significant signs of wear, such as thinning, cracks, and tears, and overt perforations were seen in five cases. Scanning electron microscopy (SEM) combined with energy-dispersive x-ray microanalysis (EDAX) showed numerous microfragments of the PTIPI in the peri-implant soft tissues. Microfragments were demonstrated by their aluminum content. In addition to the inflammatory foreign-body reaction, it is suggested that there also were toxic and hypersensitivity reactions to aluminum involved in the pathogenesis of the bone destruction.
 ...
PMID:In vivo deterioration of proplast-teflon temporomandibular joint interpositional implants: a scanning electron microscopic and energy-dispersive X-ray analysis. 849 97

An ultrastructural study of rat hippocampus was performed on young (group 1) and old (group 4) rats receiving daily subcutaneous injections of aluminum L-glutamate and on old untreated rats (group 5). Young controls were treated with sodium L-glutamate (group 2) and physiological saline (group 3). Group 1 showed vacuolated astrocytes with numerous lipofuscin deposits, mitochondrial swelling, a thinning of the myelin sheath, and many multivesicular bodies invading the cytoplasm. Cellular structure did not appear to be affected in groups 2 and 3. Group 4 showed swollen mitochondria, a demyelination process in axonal regions, sizable perivascular oedema with vessel retraction and gliofilament bundles. In this group, lipofuscin deposits in astrocytes were associated with multivesicular bodies that thinned the myelin sheath to the breaking point; however, no excitotoxic glutamate-induced effects were observed. In group 5, extreme cytoplasmic vacuolation was observed, with massive mitochondrial swelling, considerable thinning of the myelin sheath (at times to the breaking point), sizable vacuolar degeneration and gliofilament bundles. These results indicate that ultrastructural alterations in the hippocampus, such as cell vacuolization, massive mitochondrial swelling and the demyelination process, occur with aging and independently of aluminum intoxication. Similar alterations were observed in aluminum L-glutamate-intoxicated young rats, but not in controls. These results are consistent with aluminum-induced acceleration of the aging process.
 ...
PMID:Ultrastructural study of rat hippocampus after chronic administration of aluminum L-glutamate: an acceleration of the aging process. 1122 39

The effect of several deposition parameters on the uniformity of copper electrodeposition through the alumina barrier layer into porous aluminum oxide templates grown in sulfuric or oxalic acid was systematically investigated. A fractional factorial design of experiment was conducted to find suitable deposition conditions among the variables: frequency, voltage, pulsed or continuous deposition, electrolyte concentration, and barrier layer thinning voltage. Continuous ac sine wave deposition conditions yielded excellent uniformity of pore-filling but damaged the porous aluminum oxide templates when deposition was continued to grow bulk copper on the surface. Pulsed electrodeposition yielded comparable uniformity of pore-filling and no damage to the porous aluminum oxide templates, even when bulk copper was deposited on them. Further optimization of pulsed deposition conditions was accomplished by comparing square and sine waveforms and pulse polarity. Pulsed square waveforms produced better pore-filling than pulsed sine waveforms. For sine wave depositions, the oxidative/reductive pulse polarity was more efficient than the commonly used reductive/oxidative pulse polarity. For square wave depositions into sulfuric acid grown pores, the reductive/oxidative pulse polarity produces more uniform pore-filling, likely as a result of enhanced resonant tunneling through the barrier layer and reoxidation of copper in faster filling pores.
 ...
PMID:Effect of ac electrodeposition conditions on the growth of high aspect ratio copper nanowires in porous aluminum oxide templates. 1685 21

High-resolution Rutherford backscattering spectrometry (HRBS) in combination with grazing angle argon sputtering was carried out to characterize the interface of aluminum-nickel (Al-Ni) alloy and amorphous-silicon films in a thin film transistor (TFT) for liquid crystal display (LCD). After thinning the top Al-Ni layer by a 1-keV Ar sputtering, the sensitivity of the interface oxygen was improved to be twice higher than that before sputtering. The results revealed that the oxygen at the interface relates to the contact characteristics.
 ...
PMID:Characterization of interface of Al-Ni/a-Si for thin film transistor using high-resolution Rutherford backscattering spectrometry. 1831 11

This study evaluated in vitro the bond strength of Epiphany sealer prepared with resinous solvent of Epiphany system (Thinning resin) by using a push-out test. Forty maxillary canines were sectioned transversally below the cementoenamel junction to provide 4-mm-thick dentin disks that were centered in aluminum rings and embedded in acrylic resin. Root canals were prepared with tapered diamond bur. Intraradicular dentin was treated with 1% NaOCl for 30 minutes, 17% ethylenediaminetetraacetic acid for 5 minutes, and flushed with distilled water for 1 minute. The specimens were randomly distributed into 4 groups (n = 10) according to the filling material: GI, Epiphany without photoactivation; GII, Epiphany prepared with solvent without photoactivation; GIII, Epiphany followed by photoactivation; and GIV, Epiphany prepared with solvent followed by photoactivation. After the setting time, the specimens were submitted to the push-out test. The highest mean value (14.91 +/- 2.82 MPa) was obtained with Epiphany prepared with solvent followed by photoactivation (GIV), which was statistically different (P < .01) from the other groups. Groups I (8.15 +/- 2.47 MPa), II (9.46 +/- 2.38 MPa), and III (9.80 +/- 2.51 MPa) had inferior bond strength values and were statistically similar among themselves (P > .01). The resinous solvent of Epiphany system increased the bond strength of Epiphany sealer to dentin walls when followed by photoactivation.
 ...
PMID:Bond strength of Epiphany sealer prepared with resinous solvent. 1916 84

The synthesis of horizontal porous anodic alumina (PAA) structures with individually addressable channel systems is demonstrated. This was achieved by developing a multicontact design of aluminum finger structures (two to five contacts) on silicon wafers. These aluminum contacts were electrically isolated from each other, allowing the individual anodization of each contact at different conditions. This way it is possible to synthesize different pore diameters, pore densities, and channel lengths on a single chip. Scanning electron microscopy (SEM) characterization revealed that the neighboring contacts are not significantly altered during the anodization procedure. After successful barrier-layer thinning, the individual finger structures of each contact were filled by electrodeposition and thermal chemical vapor deposition. The resulting metal (Au, Cu, Ni, Co) and semiconductor (Te, Si) nanowires embedded within the porous anodic alumina mold were characterized by SEM and energy dispersive X-ray measurements. The multicontact fabrication results open a new route toward complex nanoelectronic and sensing applications.
 ...
PMID:Multiple nanowire species synthesized on a single chip by selectively addressable horizontal nanochannels. 2029 8

Stokes parameters fully characterize the polarization state of light in an experimentally accessible manner. Photoelastic modulator (PEM) based Stokes polarimetry offers a very high sensitivity which is particularly suitable for the investigation of the magneto-optical properties of nanostructured magnetic materials. In this paper, we shall describe a robust methodology recently developed by us that utilizes a dual PEM setup. As an example of its application, we report on the magneto-optical characteristics of focused Ga ion beam patterned Fe films. We have investigated Ga ion irradiation of single-layer polycrystalline Fe films deposited on Si3N4 substrates, which allows us to study the effects of ion implantation with minimum added complications. Complemented by structural and other characterization techniques, the absolute measurement of magneto-optical effects through the determination of Stokes parameters has enabled us to effectively separate the various contributions from film thinning due to sputtering, structural modifications and compositional changes caused by Ga incorporation. A comparison is also made between the magneto-optical behavior of patterned thin films and that of anodic aluminum oxide embedded magnetic nanowire arrays.
 ...
PMID:Magneto-optical stokes polarimetry and nanostructured magnetic materials. 2262 97

Here we report a strategy for combining techniques for pore branching and barrier layer thinning to produce 3D porous anodized aluminum oxide films with direct ohmic contact to the native aluminum. This method provides an example of a rationally designed template which need not be removed from the aluminum, but which is also not constrained to traditional 2D pore geometry. We first demonstrate the barrier layer removal and pore branching techniques independently, and then combine them to produce free standing arrays of interconnected Ni nanostructures. Nickel nanostructures are deposited directly onto the aluminum to demonstrate the success of the structural modification, and showcase the potential for these films to be used as templates. This approach is the first to demonstrate the design and execution of multiple pore modification techniques in the same membrane, and demonstrates the first directly deposited 3D structures on aluminum substrates.
...
PMID:Anodization control for barrier-oxide thinning and 3D interconnected pores and direct electrodeposition of nanowire networks on native aluminium substrates. 2556 70

To observe the fine distribution of minor aluminum and germanium dopants in the erbium-doped fiber (EDF) core of an optical amplifier, a sample thinning technique was applied for field emission electron probe microanalysis (FE-EPMA) together with wavelength-dispersive X-ray spectrometry. This technique significantly improved the spatial resolution without much degradation of the minimum detection limit for FE-EPMA. As such, this enabled us to observe the distribution of minor dopants in EDF. Moreover, we propose a very simple sample preparation to prevent electron-beam radiation damage, a problem involved with FE-EPMA of low-conductivity materials such as SiO2 glass, which is the main component of EDF.
 ...
PMID:Observation of Fine Distribution of Minor Dopants in an Erbium-Doped Fiber Core using a Sample Thinning Technique for Field Emission Electron Probe Microanalysis. 2657 81


1 2 Next >>