Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0599766 (functional recovery)
 13,441 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

This report describes a new technique for treatment of a segmental defect in long bones that uses a cylindrical titanium mesh cage, in combination with cancellous bone allograft and demineralized bone matrix putty (Grafton), stabilized with a statically locked intramedullary nail. Two clinical cases of tibia defects treated with this technique are presented. At the one-year follow-up, radiographically both cases demonstrated excellent limb alignment, stability, and bony healing. Immediate full weight-bearing was initiated in each case, and early limb functional recovery was achieved. Preliminary data suggest that this technique may be a reasonable alternative to currently used methods for management of select long bone segmental defects.
 ...
PMID:The cylindrical titanium mesh cage for treatment of a long bone segmental defect: description of a new technique and report of two cases. 1063 Aug 4

For a total of 123 thoracolumbar traumatic lesions treated surgically in 101 patients over approximately 2 years (all monitored clinically and radiographically up to consolidation by follow-ups after from 6 to 26 months, mean 10 months) the technique used, complications and treatment are reported. The treatment procedure included: emergency surgery decompression, osteosynthesis, and fusion (posterior and possibly intersomatic); immediate recovery of function and loading; clinical and radiographic monitoring within 4-6 weeks, and possible anterior fusion in case of insufficient reconstruction of the anterior column. The complications observed out of 123 fractures were: collapse of the implant (4 cases), infection (5 cases), liquoral fistula (1 case), transitory paralysis of the abdominal muscles homolateral to the lombotomic incision (1 case), TVP (2 cases), bronchial pneumonia (2 cases), paralytic ileum (1 case). There was no sagittal deformity (secondary kyphosis) except for 5 cases of mechanical collapse that were resolved with a new operation. Neurologic deficit was caused by fracture in 49 patients (40% of the fractures or 48% of the patients). Six patients out of 30 affected with spinal cord lesion (20%) and 15 out of 19 affected with cone and/or cauda lesion (79%) improved. There was no progression of the neurologic findings after surgery. The authors conclude by proposing a protocol of posterior osteosynthesis for the use of a system in titanium made up of pedicle screws and hooks connected to a pair of cylindrical bars joined together.
 ...
PMID:The treatment of thoracic and lumbar spine fractures: a study of 123 cases treated surgically in 101 patients. 1156 50

This case report describes a Gustilo Anderson type IIIB tibia fracture associated with extensive segmental bone loss at the proximal meta-diaphyseal junction associated with a tibial plateau fracture and an avulsion of the tibial tubercle. After the tibial plateau fracture was stabilized using cannulated lag screws, the shaft fracture was stabilized using a statically locked intramedullary nail in combination with a cylindrical titanium mesh cage and cancellous bone graft. The soft tissue defect was covered with local flaps. Immediate full weight bearing was initiated, and early functional recovery was achieved. At the final follow-up, plain radiographs demonstrated excellent limb alignment, and bony healing with computed tomography examination revealed bony ingrowth through the cage. This technique may be a reasonable alternative in the treatment of segmental bone loss of long bones.
 ...
PMID:Management of a long segmental defect at the proximal meta-diaphyseal junction of the tibia using a cylindrical titanium mesh cage. 1267 95

Soft tissue attachment to a metallic prosthesis is required for the improvement of the functional outcome of endoprosthetic reconstructions. Direct tendon attachment to the metallic surface can be achieved through fibrous ingrowth, but such an attachment has a mechanical strength less than one fifth of that of a normal tendon insertion. Regeneration of a transitional structure between the tendon and the metallic surface similar to the normal morphology of a direct tendon insertion may improve the mechanical strength of the new tendon insertion. The objective of the study was to investigate the effect of placement of an interpositional autogenous cancellous bone plate augmented with bone marrow on the mechanical strength of the soft tissue attachment to the metallic surface. The insertion of the supraspinatus tendon was reattached to a porous titanium prosthesis in a canine shoulder model. An autogenous cancellous bone plate supplemented with bone marrow was positioned between the metallic surface and the tendon. Assessment of load-bearing, as a measure of functional recovery, and radiological analysis were performed at 3, 6, 9, 12, and 15 weeks. The animals were euthanized 16 weeks after surgery, and the specimens were subjected to tensile mechanical testing (six animals) and microradiographic-histologic evaluation (three animals). Functional analysis showed a 90.3% recovery of preoperative weight-bearing by 16 weeks (p < 0.05). The mineralized area around the prostheses increased by 63% over time (p < 0.05). Tensile stiffness and strength of the reconstruction were 43.6% and 42.8% of the intact tendon insertion values, respectively. These results were higher than in previous experiments using the direct tendon attachment (p < 0.01, p < 0.05, respectively) or the interpositional bone plate without marrow supplementation (p < 0.05, p < 0.05, respectively). Morphologically, the tendon reattachment site contained the basic tissue transition zones in normal tendon insertion to bone. Inductive bone grafting, supplemented with bone marrow, in the biologic augmentation of tendon anchoring onto a porous metallic prosthesis was an effective technique to increase the mechanical strength of the tendon attachment to the metallic prosthesis.
 ...
PMID:Biologic tendon fixation to metallic implant augmented with autogenous cancellous bone graft and bone marrow in a canine model. 1238 60

The complications of autogenous bone grafting cause spinal surgeons to seek alternative methods for cervical spinal fusion. This prospective study was conducted to evaluate the safety and efficacy of rectangular titanium cages as compared to the widely performed iliac crest autograft fusion. Thirty-six patients with cervical disc disease in whom an anterior cervical approach was indicated for discectomy were included in a prospective controlled study protocol with 1-year follow-up. The first 18 consecutive patients received iliac crest autograft, while the next 18 received rectangular titanium cages. According to Odom's criteria, 15 of 18 (83%) patients in both groups experienced good to excellent functional recovery. According to the patient satisfaction index, 17 of 18 (94%) in both groups were satisfied. There were no significant differences in neck or arm pain. Fusion was present after 1 year in 16 of 18 (89%) patients in the iliac crest autograft group and 15 of 18 (83%) in the rectangular titanium cage group. In the autograft group, one case of pseudarthrosis was present, and marked hip pain was observed in four patients. There were no implant-related complications in the cage group. The authors conclude that titanium cages in anterior cervical discectomy constitute a safe and efficient alternative to iliac crest bone autograft.
 ...
PMID:A prospective clinical comparison of rectangular titanium cages and iliac crest autografts in anterior cervical discectomy and fusion. 1290 78

Midshaft fractures of the clavicle are mostly treated conservatively. For the few cases in which stabilisation is needed, open reduction and plate fixation is the standard procedure. We report a minimally invasive technique of intramedullary stabilisation using a titanium nail carried out in 35 markedly displaced midclavicular fractures. Twelve fractures were simple and 23 consisted of more than two fragments. A total of 62.9% (22/35) of the patients presented additional injuries; 37.1% (13/35) with additional fractures. There were four ipsilateral scapular neck fractures. In 74.3% (26/35) of patients closed reduction was possible, whereas nine fractures required open reduction before the nail inserted from the sternal end of the clavicle could be introduced into the peripheral fragment. All fractures healed clinically and radiologically within 6 weeks. In contrast to conservatively treated fractures, length discrepancies of 1 cm or more, mainly shortening, could be avoided. Using a visual analog scale, significant pain relief (8.4-2.4 points) was already recorded on the first day after surgery. Patients with an isolated fracture of the clavicle showed a nearly normal range of motion only 1 week after surgery, whereas patients with associated scapular or rib fractures needed up to 3 weeks to reach normal shoulder function. No patient complications requiring interventional procedures occurred. Minimally invasive, elastic, stable intramedullary nailing of midshaft fractures of the clavicle should be recommended as an alternative to conservative treatment because of early pain relief, associated rapid functional recovery and anatomical restoration of the clavicle.
 ...
PMID:[Elastic, stable intramedullary nailing in midclavicular fractures--a change in treatment strategies?]. 1630 78

Sternal malunion can be a significant cause of morbidity in double-lung transplantation when it is performed through a thoracosternotomy or clamshell incision. Some patients experience increased pain with malunion and have delayed or decreased functional recovery. We propose a method of sternal plating to decrease the incidence of sternal malunion encountered with this incision. The transverse sternotomy can be rigidly fixed with two titanium interlocking plates during chest closure, a procedure that offers the potential for timely and consistent union of the sternum. The interlocking plate configuration also affords a unique quality to this closure; a pin securing the two plates can be quickly released allowing expedient access to mediastinal structures if emergent re-entry is necessary.
 ...
PMID:Sternal plating to prevent malunion of transverse sternotomy in lung transplantation. 1880 10

Fiber-reinforced composites (FRC) have the potential for use as load-bearing orthopaedic implants if the high strength and elastic modulus of FRC implant can be matched with local requirements. This study tested the in vivo performance of novel FRC implants made of unidirectional glass fibers (E-glass fibers in Bis-GMA and TEGDMA polymeric matrix). The implant surface was covered with bioactive glass granules. Control implants were made of surface-roughened titanium. Stress-shielding effects of the implants were predicted by finite element modelling (FEM). Surgical stabilization of bone metastasis in the subtrochanteric region of the femur was simulated in 12 rabbits. An oblong subtrochanteric defect of a standardized size (reducing the torsional strength of the bones approximately by 66%) was created and an intramedullary implant made of titanium or the FRC composite was inserted. The contralateral femur served as the intact control. At 12 weeks of healing, the femurs were harvested and analyzed by radiography, torsional testing, micro-CT imaging and hard tissue histology. The functional recovery was unremarkable in both groups, although the final analysis revealed two healed undisplaced peri-implant fractures in the group of FRC implants. FEM studies demonstrated differences in stress-shielding effects of the titanium and FRC implants, but the expected biological consequences did not become evident during the follow-up time of the animal study. Biomechanical testing of the retrieved femurs showed no significant differences between the groups. The torsional strength of the fixed bones had returned the level of contralateral intact femurs. Both implants showed ongrowth of intramedullary new bone. No adverse tissue reactions were observed. Based on these favorable results, a large-scale EU-project (NewBone, www.hb.se/ih/polymer/newbone) has been launched for development of orthopaedic FRC implants.
 ...
PMID:Development of a multi-component fiber-reinforced composite implant for load-sharing conditions. 1910 47

The purpose of this prospective randomised study is to compare the early clinical results of the metal-on-metal hip resurfacing to metal-on-metal THA. Two hundred and ten hips were randomised between August 2003 and January 2006 (191 subjects). One hundred and two hips were implanted with an uncemented titanium tapered stem, and an uncemented titanium acetabular component and 28 mm metal-on-metal bearing (THA group) and 103 hips received a hybrid metal-on-metal surface replacement arthroplasty (SRA group). No significant difference was found with the WOMAC or Merle dAubign-Postel scales. However, a significantly higher activity level was found in the SRA group (UCLA score 6.3 versus 7.1, p= 0.037) and a greater percentage of the SRA patients returned to heavy or moderate activities at one - year postoperatively (72% versus 39%, p=0.007). No patient in either group presented with thigh pain one year after surgery. Both techniques present similar complication rates (0.15). This study supports the theory of better functional recovery in the short-term favouring the SRA when compared to THA. The clear benefit of surface replacement arthroplasty over THA is proximal femoral bone preservation. However, the long term survivorship of the SRA will determine the real value of the theoretical advantage.
 ...
PMID:A prospective randomized clinical trial comparing metal-on-metal total hip arthroplasty and metal-on-metal total hip resurfacing in patients less than 65 years old. 1921 33

Traumatic sternal segments dislocation is a rare pathology that is on the increase because of road accidents. Ideal treatment is controversial as it is a benign non-life-threatening lesion. The few cases reported in the literature do not shed light on any preferred procedure. In the present study, three patients were treated by surgical steel monofilament and eight by titanium screws and plates and demineralized bone matrix. The reduced hospitalization, rapid functional recovery, and excellent aesthetic results of the titanium patients make use of the surgical approach inevitable.
 ...
PMID:Use of demineralized bone matrix and plate for sternal stabilization after traumatic dislocation. 2122 3


1 2 3 Next >>