Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0432222 (SEM)
 47,337 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The N(2)O-mediated oxidative dehydrogenation of propane (ODHP) to propylene has been investigated in the temperature range of 673-773 K over steam-activated FeMFI zeolites with different framework compositions (Si-Al, Si-Ga, Si-Ge, and pure Si). The catalysts, which were characterized by ICP-OES, XRD, SEM, N(2) adsorption, NH(3)-TPD, and FTIR of pyridine adsorbed, HRTEM, and UV/vis, have a very similar iron content (0.6-0.7 wt %). A tapered element oscillating microbalance (TEOM) coupled to on-line analysis of products has been applied to simultaneously monitor activity and mass changes during the ODHP reaction. FeAlMFI and FeGaMFI zeolites display higher propylene yields (up to 25%) and a much slower deactivation due to coking than do FeGeMFI and FeMFI zeolites. The higher density and strength of acid sites in the former samples did not induce a faster catalyst deactivation. In general, catalyst deactivation was accelerated upon decreasing the reaction temperature. The total amount of coke formed in the samples during 400 min on stream ranged from 6 to 23 wt %, increasing linearly with the amount of propylene produced. The distinct performance of both groups of zeolites is likely related to the different iron speciation, which is influenced by the composition of the framework. The smaller primary crystallites of FeAlMFI and FeGaMFI, as well as the presence of mesopores in these samples, which are created by dislodgement of aluminum and gallium to extraframework positions, appear to be also beneficial for higher catalyst effectiveness and a reduced deactivation.
 ...
PMID:Framework composition effects on the performance of steam-activated FeMFI zeolites in the N2O-mediated propane oxidative dehydrogenation to propylene. 1685 57

A series of Cr-incorporated PKU-1 molecular sieves (Cr-PKU-1) were synthesized by using boric acid as a flux, and the physicochemical properties were characterized by XRD, ICP, SEM, XPS, UV-vis, and NH3-TPD methods. The morphology of Cr-PKU-1 is a needlelike hexagonal prism with uniform size of about 2 microm in diameter and 20-50 microm in length. XRD and UV-vis provide direct evidence that Cr ions have been successfully incorporated into the framework of PKU-1. NH3-TPD shows a dramatic increase of acidic sites in the Cr-PKU-1 in comparison with PKU-1, indicating that the Cr incorporation can significantly modify the acidity of the compound. In addition, the incorporated Cr ions may act as redox centers, thus catalytic performance of Cr-PKU-1 molecular sieve was investigated by the selective oxidation of styrene under mild reaction conditions.
 ...
PMID:Synthesis, characterization, and catalytic performance of Cr-incorporated aluminoborate octahedral molecular sieves. 1685 67

The influence of yttrium oxide on the bioactivity of glasses in the system SiO(2)-Na(2)O-P(2)O(5)-CaO-B(2)O(3)-K(2)O-MgO was studied in a simulated body fluid (SBF). Two series of glasses with different bioactivity were investigated. The reaction layers formed on the surface of the exposed glasses were evaluated by means of back scattered electron imaging of scanning electron microscopy equipped with energy dispersive X-ray analysis (BEI-SEM/EDXA). The concentration of Y, Ca and P released from the glasses into SBF, during 21 days was determined using inductively coupled plasma-emission spectroscopy ICP-AES and inductively coupled plasma-mass spectroscopy ICP-MS. Introducing yttrium in the selected bioactive glass tended to diminish the bioactivity of the glasses. The thickness of the calcium phosphate layer decreased with increasing yttrium oxide content. The same effect was also observed when yttrium oxide partially replaced only calcium, magnesium and phosphorous oxide in the precursor glass. The data show that we can produce bioactive glasses with yttrium oxide as a component. By suitable tailoring of the rest of the glasses the yttrium effect on the glass behavior in SBF should be possible to control and thus produce yttrium containing glasses with desired bioactivity.
 ...
PMID:Study of yttrium containing bioactive glasses behaviour in simulated body fluid. 1689 63

The mesoporous MnSBA-15 materials with different n(Si)/n(Mn) ratios of 4, 8, 20, and 50 have been synthesized, for the first time, using manganese nitrate tetrahydrate and Pluronic 123 triblock polymer [(EO)20(PO)70(EO)20] by simply adjusting the molar ratio of water to hydrochloric acid (n(H2O)/n(HCl)) under direct hydrothermal conditions. For the effect of structural and textural properties with incorporation of manganese, the MnSBA-15 has been synthesized with different synthesis temperatures at the fixed molar ratios of n(Si)/n(Mn) = 4 and n(H2O)/n(HCl) = 295 in the synthesis gel. The hydrothermal and thermal stabilities of MnSBA-15 have also been investigated. The calcined MnSBA-15 materials prepared have been characterized by ICP-AES, XRD, N2 adsorption, ESR, FE-SEM, and TEM. The ICP-AES studies show a higher amount of manganese incorporation on the silica pore walls, as MnSBA-15 with a n(Si)/n(Mn) ratio up to 2.2 can be successfully prepared at a fixed n(H2O)/n(HCl) molar ratio of 295 by adjusting the ratios of n(Si)/n(Mn) in the synthesis gel. The structural and textural properties of calcined MnSBA-15 prepared can be found by the results of XRD and N2 adsorption. The investigation of ESR results clearly describe the effect of structure and Mn species coordination on the SBA-15 silica pore walls while the uniform pore diameter and rope-like hexagonal mesoporous structure of MnSBA-15 can be identified by TEM and FE-SEM images. With increasing synthesis temperature, an increase the unit cell parameter, pore size, and pore volume and a decrease the specific surface area and pore wall thickness of MnSBA-15 can be obviously noted by the results of XRD and N2 adsorption. The hexagonal MnSBA-15 materials prepared could be tested as catalysts in epoxidation of trans-stilbene to produce trans-stilbene oxide under various optimal conditions while their catalytic properties could also be compared to the results of MnMCM-41 and ZrMnMCM-41.
 ...
PMID:Direct synthesis of well-ordered and unusually reactive MnSBA-15 mesoporous molecular sieves with high manganese content. 1706 42

XAD copolymer resins may be functionalized with heavy metal ion-selective ligands either by covalent linkage to the polymer backbone or by impregnation. These resins may be tailored to be specific for certain heavy metals by adjusting the retention and elution parameters. For the synthesis of immobilized Amberlite XAD-4 copolymer resins that are expected to preconcentrate a number of transition and heavy metals, the Schiff base method was chosen. For this purpose the copolymer was nitrated, reduced to the corresponding amine and converted to the imine compounds via a Schiff base reaction using different organic aldehyde compounds. The interactions of 8 elements (Cd, Co, Cu, Mn, Ni, Pb, U and Zn) with the resins were qualitatively investigated. Optimal pH for retention was typically 6-8 for most resins although one could be used at pH 5 and elution was achieved using 0.1 M HNO3. The resins were characterized by FTIR, SEM and elemental analysis. It was demonstrated that the resins could be used to preconcentrate ultra-trace analytes from natural waters, and analysis of environmental certified reference materials using FI-ICP-MS showed good agreement with the certified values. Metal retention capacities were also calculated using a batch system and were found to compare favorably with other resins reported in the literature.
 ...
PMID:Comparison of some newly synthesized chemically modified Amberlite XAD-4 resins for the preconcentration and determination of trace elements by flow injection inductively coupled plasma-mass spectrometry (ICP-MS). 1706 92

The apatite forming ability of biopolymer bacterial cellulose (BC) has been investigated by soaking different BC specimens in a simulated body fluid (1.5 SBF) under physiological conditions, at 37 degrees C and pH 7.4, mimicking the natural process of apatite formation. From ATR-FTIR spectra and ICP-AES analysis, the crystalline phase nucleated on the BC microfibrils surface was calcium deficient carbonated apatite through initial formation of octacalcium phosphate (OCP) or OCP like calcium phosphate phase regardless of the substrates. Morphology of the deposits from SEM, FE-SEM, and TEM observations revealed the fine structure of thin film plates uniting together to form apatite globules of various size (from <1 mum to 3 mum) with respect to the substrates. Surface modification by TEMPO (2,2,6,6-tetramethylpyperidine-1-oxyl)-mediated oxidation, which can readily form active carboxyl functional groups upon selective oxidation of primary hydroxyl groups on the surface of BC microfibrils, enhanced the rate of apatite nucleation. Ion exchanged treatment with calcium chloride solution after TEMPO-mediated oxidation was found to be remarkably different from other BC substrates with the highest deposit weight and the smallest apatite globules size. The role of BC substrates to induce mineralization rate differs according to the nature of the BC substrates, which strongly influences the growth behavior of the apatite crystals.
 ...
PMID:Surface functional group dependent apatite formation on bacterial cellulose microfibrils network in a simulated body fluid. 1711 6

The use of recycling aluminum from beverage containers and rice-hull ash (RHA) offers to be an attractive alternative for the economic production of Al/SiCp composites. However, corrosion phenomena in the composites represent technological barriers yet to be resolved before they can be exploited to their full potential. A simple methodology involving characterization by XRD, SEM, EDX, FTIR and ICP was designed in order to investigate the causes of the rapid degradation in a humid environment of Al/SiCp composites produced with RHA and aluminum cans. Results reveal that the use of RHA was beneficial to avoid degradation through the formation and subsequent hydration of the Al4C3 phase. However with condensed moisture acting as an electrolyte, localized corrosion took place with aggressive damage manifested by the disintegration of the composite into a powdery mixture. The relevant corrosion mechanism was mainly attributed to microgalvanic coupling between the Mg2Si intermetallic compound and the matrix (although other phases such as SiC, Si, MgAl2O4 could also work as microcathodes).
 ...
PMID:Degradation of Al/SiCp composites produced with rice-hull ash and aluminum cans. 1732 Mar 70

Apatite and Portland/apatite composite cements containing steelwork dusts have been prepared using a low temperature hydrothermal method (200 degrees C, 48h). The produced solids were characterized by means of XRD, IR, and SEM-EDX, and the remaining liquid was analyzed by ICP. The results clearly show the capability of these cements to inertise the heavy metals contained in steelwork dusts, that is Fe, Pb, Mo, Cr, Mn, Ni, and Zn. In the case of apatitic cements, Fe, Mg, Cr, Mn, and Pb coming from steel dust replaced Ca in the divalent cation position of the apatite structure, while Si and Mo replaced P in tetrahedral position. The average crystal size of the apatite-containing dust is smaller than in pure apatite synthesized using the same procedure, which is related to the magnesium content of the dust, since magnesium seems to inhibit the crystal growth. XRD diagrams of composite cements show only peaks corresponding to phases observed in the single cements, and in that no new phases are found. However, EDX analysis reveals the introduction of cations coming from Portland cement into the apatite structure. From the results of water analysis it could be concluded that the capability of retention is higher in composite matrices than in the pure apatite one. In conclusion, the obtained data allow stating that the proposed method, the hydrothermal synthesis of steelwork dust containing cement, is a reliable one for immobilization of toxic residues containing heavy leachable cations.
 ...
PMID:Apatite and Portland/apatite composite cements obtained using a hydrothermal method for retaining heavy metals. 1753 19

Several different methods can be employed to test for gunshot residue (GSR) on a decedent's hands, including scanning electron microscopy with energy dispersive x-ray (SEM/EDX) and inductive coupled plasma-atomic emission spectrometry (ICP-AES). In part I of this 2-part series, GSR results performed by SEM/EDX in undisputed cases of suicidal handgun wounds were studied. In part II, the same population was studied, deceased persons with undisputed suicidal handgun wounds, but GSR testing was performed using ICP-AES. A total of 102 cases were studied and analyzed for caliber of weapon, proximity of wound, and the results of the GSR testing. This study found that 50% of cases where the deceased was known to have fired a handgun immediately prior to death had positive GSR results by ICP/AES, which did not differ from the results of GSR testing by SEM/EDX. Since only 50% of cases where the person is known to have fired a weapon were positive for GSR by either method, this test should not be relied upon to determine whether someone has discharged a firearm and is not useful as a determining factor of whether or not a wound is self-inflicted or non-self-inflicted. While a positive GSR result may be of use, a negative result is not helpful in the medical examiner setting as a negative result indicates that either a person fired a weapon prior to death or a person did not fire a weapon prior to death.
 ...
PMID:Gunshot residue testing in suicides: Part II: Analysis by inductive coupled plasma-atomic emission spectrometry. 1772 Nov 64

A novel method for the determination of Al, Ca, Cr, Cu, Fe, Mg, Mn, Ni and Ti in high purity silicon carbide (SiC) using slurry introduction axial viewed inductively coupled plasma optical emission spectrometry (ICP-OES) was described. The various sizes of SiC slurry were dispersed by adding dispersant polyethylene imine (PEI). The stability of slurry was characterized by zeta potential measurement, SEM observation and signal stability testing. The optimal concentration of PEI was found to be 0.5 wt% for the SiC slurry. Analytical results of sub-mum size SiC by the slurry introduction were in good accordance with those by the alkaline fusion method which verified that determination could be calibrated by aqueous standards. For mum size SiC, results of most elements have a negative deviation and should be calibrated by the Certified Reference Material slurry. Owing to a rather low contamination in the sample preparation and stability of the slurry, the limits of detection (LODs), which are in the range of 40-2000 ng g(-1), superior to those of the conventional nebulization technique by ICP-OES or ICP-MS.
 ...
PMID:Direct determination of impurities in high purity silicon carbide by inductively coupled plasma optical emission spectrometry using slurry nebulization technique. 1772 86


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>