Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0432222 (SEM)
 47,337 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

We performed 22 canine orthotopic partial liver transplantations (PLTs) with three different revascularization methods; portal vein arterialization (PVA group, n = 11), hepatic arterial shunt (HAS group, n = 5), and conventional portal vein reperfusion (control group, n = 6). Our purpose was to evaluate the feasibility of PVA as a revascularization technique in PLT assessing the changes in arterial ketone body ratio (KBR) as an index of hepatic energy status. After the first anastomosis (left hepatic vein), the ischemic partial liver graft was revascularized with arterial blood flow shunted from the external iliac artery to the hepatic side of the portal vein (PVA group) or the proper hepatic artery (HAS group). Both anhepatic period and ischemia time were significantly shortened in groups PVA and HAS as compared with those in control. In the PVA group, 10 out of 11 recipients survived for at least 5 days (14.2 +/- 3.8 days, mean +/- SEM), while 3 out of 5 (5.2 +/- 1.0) survived in the HAS group and 4 out of 6 (6.2 +/- 1.3) in the controls. Although portal blood flow during PVA was only about 25% of the total hepatic blood flow at preclamping, the KBR was rapidly restored after PVA and showed almost the same values at preclamping. The KBR values during the arterialization time and initial velocity of KBR recovery in the PVA group were significantly higher than those in the HAS and control groups. These results suggest that PVA presents an attractive option in PLT.
 ...
PMID:Temporary portal vein arterialization as an attractive option in canine orthotopic partial liver transplantation. 178 64

A cationic, high-water-content hydrogel membrane composed of poly(vinyl alcohol) (PVA) and poly(ally-biguanido-co-allylamine) hydrochloride (PAB) with positively charged biguanido groups that resemble arginine residues was developed. The PAB was prepared by reacting poly(allylamine) hydrochloride (PAA) with guanyl-O-methyl isourea. PAB/PVA hydrogel membranes were prepared by repeated freezing and thawing. For comparison, hydrogel membranes composed of PAA and PVA were also prepared. The interaction between these hydrogel membranes and mouse fibroblast (L929) was studied by a cell culture method. The PAB hydrogel blend had a relatively low percentage of initial cell attachment. The cell growth on the PAB hydrogel membranes showed a maximum at 5 mol % PAB content that was as high as commercially available plastic films. However, cells on hydrogel membranes with 50 mol % PAB content and 0 mol % PAB content (only PVA) did not seem to grow; neither did the 5/95 PAA/PVA membranes. Water contact angles of hydrogel membranes did not vary with the PAB content. Morphology of the cell attachment was observed by SEM. On the PAB blend hydrogel surfaces, cells were not spindle-shaped and monolayers, but rather cells aggregated in spherical clusters.
 ...
PMID:Cell growth on poly(vinyl alcohol) hydrogel membranes containing biguanido groups. 800 50

In an attempt to develop blood-contacting tubes that can be applied for short-term uses with a reduced heparin concentration or, ideally, without heparinization, we evaluated the blood compatibility of polymeric materials with a rabbit ex vivo shunt model. The shunt tubes employed were made of silicone, plasticized poly(vinyl chloride) (PVC), and segmented poly(ether urethane) (PU). In addition, two kinds of surface-modified tube were used: poly(vinyl alcohol) (PVA)-coated PVC and poly(dimethylacrylamide) (PDMAA)-grafted PU. The ex vivo shunt results correlated well with protein adsorption and platelet adhesion in vitro. The following order for the extent of platelet deposition was given, irrespective of the blood-contacting duration: PDMAA-grafted PU < PVA-coated PVC < PU < silicone, PVC. It is likely that many platelet aggregates detached from the PVA-coated PVC surface. For PDMAA-grafted PU, no trace of detachment of aggregates could be detected on any of the SEM photographs. The number and morphology of blood cells adhered onto the tube surfaces during ex vivo shunting were dependent on the kind of polymer surfaces, the blood exposure time, and the flow rate of blood.
 ...
PMID:Platelet deposition onto polymeric surfaces during shunting. 836 Feb 3

Aqueous poly(vinyl alcohol) solutions were frozen at -20 degrees C for 6-12 h, and subsequently thawed for 1-2 h. The above mentioned process repeated for 1-3 times. After the specimen was dehydrated in vacuum, a kind of artificial articular cartilage--PVA-hydrogel--was developed. The micromorphology of PVA-hydrogel has been observed by means of optical microscopy and SEM. DSC and mechanical tests have been employed to investigate the influence of freezing, thawing, dehydrating and irradiating upon the crystallinity and the mechanical properties of PVA-hydrogel.
 ...
PMID:The development of artificial articular cartilage--PVA-hydrogel. 983 Sep 90

Body dimensions, birth and organ weights of calves derived from embryos produced in 2 in vitro culture systems (modified SOFaa with 20% cattle serum and co-cultured with oviduct-epithelium cells [IVPserum, n=8], and modified SOFaa with 3 mg/mL PVA [IVPdefined, n=6]) were compared with calves originating from artificial insemination (AI, n=85). Three additional IVP calves were included which had been vitrified as mature oocytes by the open pulled straw (OPS) method, warmed, fertilized and cultured to the blastocyst stage in modified SOFaa with 5% cattle serum, then again OPS-vitrified and warmed prior to transfer (IVPops, n=3). At birth, gestation length and birth weights were registered for all calves. At 1 wk of age all 17 IVP and 7 of the AI calves were killed, and their body dimensions and organ weights recorded. Birth weight was higher for the IVPserum and IVPops calves than for AI control calves (kg +/- SEM: IVPserum 46.9+/-1.8, IVPops 50.6+/-2.4, AI 41.8+/-0.8; P < 0.002). There was no difference between IVP and AI calves regarding gestation length and no effect of culture conditions on body dimensions or organ weights, except for longer hind legs in IVPdefined calves compared with AI calves (cm +/- SEM: IVPdefined 93+/-2, AI 87+/-2; P < 0.04). The IVPops calves had an increased liver weight compared with AI and the other IVP calves (g +/- SEM: IVPops 1.457+/-59; AI 1,117+/-37; IVPserum 1,159+/-34, IVPdefined 1,073+/-39; P < 0.0003). It is concluded that in vitro culture of bovine embryos in the presence of serum and oviduct epithelium cells increased birth weight but not organ weight and body dimension in 1-wk-old calves. However, vitrification of the ova as oocyte and again as blastocysts increased birth weight and liver size. This possible effect of cryopreservation of oocytes on subsequent fetal development awaits further investigation.
 ...
PMID:Body dimensions and birth and organ weights of calves derived from in vitro produced embryos cultured with or without serum and oviduct epithelium cells. 1096 19

Blood chemistry (pH, pCO2, pO2, glucose, lactate) as well as plasma insulin and growth hormone of calves derived from embryos produced under 2 different in vitro culture systems (modified SOFaa with 20% serum and co-culture with bovine oviduct epithelial cells [IVP serum, n=8] or with 3 mg/mL PVA [IVPdefined, n=6]) were compared with those of calves derived from AI (n=5). Calvings were classified according to the ease (unassisted, light traction, heavy traction). Blood samples were taken from the jugular vein of calves at 5, 15, 30 and 60 min, and at 2, 3, 6, 12, 18 and 24 h after delivery, then daily for 6 d. At the second day of life after 4 feedings and a 4-h fasting period, a glucose tolerance test was performed to evaluate glucose metabolism and insulin secretion. Calves in the IVP serum group had higher birth weights than AI calves (LS mean +/- SEM, IVP serum: 45.2 +/- 1.4 kg vs AI: 40.4 +/- 1.7 kg; P < 0.05), while the birth weights of calves in the IVP defined group were in between (IVPdefined: 41.9 +/- 1.6 kg). More IVP serum calves (75%) needed assistance than IVP defined (33%) or AI (40%) calves. The effect of ease of calving vs the effect of embryo culture was compared in relation to blood parameters at birth. There was an effect of ease of calving but not of embryo culture conditions on blood pH, lactate and PCO2. Calves requiring heavy traction had lower pH during the first 3 h after calving, a higher lactate during the first 60 min after calving and a higher pCO2 the first 2 h after calving than calves born unassisted. Calves requiring heavy traction also had lower pH the first 2 h and higher lactate the first 3 h after calving than calves born by light traction. IVP defined calves had lower lactate than IVP serum calves the first 60 min after calving. At 6 h after delivery, all blood parameters had stabilized. There was no effect of either embryo culture or ease of calving on basal insulin and growth hormone level, or the ability of the calves to handle glucose postnatally and during a glucose tolerance test.
 ...
PMID:Ease of calving, blood chemistry, insulin and bovine growth hormone of newborn calves derived from embryos produced in vitro in culture systems with serum and co-culture or with PVA. 1099 Mar 56

In this study, the process included aqueous Poly (vinyl alcohol) solutions frozen at -20 degrees C for 6-12 h, and then thawed for 1-2 h. The same process was repeated 1-3 times. After the specimen was dehydrated in vacuum, a kind of artificial articular cartilage--PVA-hydrogel was made up. Subsequently, the micromorphology of PVA-hydrogel was observed by means of optical microscopy and SEM. DSC and mechanical tests were employed in ivestigating the influence of freesing, thawing, dehydrating and irradiating upon the crystallity and the mechanical properties of PVA-hydrogel.
 ...
PMID:[The development of a kind of artificial articular cartilage-PVA-hydrogel]. 1255 67

Temperature-sensitive diblock copolymers, poly(N-isopropylacrylamide)-b-poly(D,L-lactide) (PNIPAAm-b-PLA) with different PNIPAAm contents were synthesized and utilized to fabricate microspheres containing bovine serum albumin (BSA, as a model protein) by a water-in-oil-in-water double emulsion solvent evaporation process. XPS analysis showed that PNIPAAm was a dominant component of the microspheres surface. BSA was well entrapped within the microspheres, and more than 90% encapsulation efficiency was achieved. The in vitro degradation behavior of microspheres was investigated using SEM, NMR, FTIR, and GPC. It was found that the microspheres were erodible, and polymer degradation occurred in the PLA block. Degradation of PLA was completed after 5 months incubation in PBS (pH 7.4) at 37 degrees C. A PVA concentration of 0.2% (w/v) in the internal aqueous phase yielded the microspheres with an interconnected porous structure, resulting in fast matrix erosion and sustained BSA release. However, 0.05% PVA produced the microspheres with a multivesicular internal structure wrapped with a dense skin layer, resulting in lower erosion rate and a biphasic release pattern of BSA that was characterized with an initial burst followed by a nonrelease phase. The microspheres made from PNIPAAm-b-PLA with a higher portion of PNIPAAm provided faster BSA release. In addition, BSA release from the microspheres responded to the external temperature changes. BSA release was slower at 37 degrees C (above the LCST) than at a temperature below the LCST. The microspheres fabricated with PNIPAAm-b-PLA having a 1:5 molar ratio of PNIPAAm to PLA and 0.2% (w/v) PVA in the internal aqueous phase provided a sustained release of BSA over 3 weeks in PBS (pH 7.4) at 37 degrees C.
 ...
PMID:Preparation and characterization of temperature-sensitive poly(N-isopropylacrylamide)-b-poly(D,L-lactide) microspheres for protein delivery. 1460 9

Non-ionic surfactants have been employed as alternatives to PVA for the emulsification-encapsulation of a conformationally labile protein (FIII9'-10) into PLGA microspheres. FIII9'-10 was encapsulated using a w/o/w double emulsification-evaporation technique and the microspheres fabricated were characterized by SEM and CLSM. The peptide backbone integrity of FIII9'-10 was assayed by SDS-PAGE and the degree of unfolding of FIII9'-10 following emulsification-encapsulation was assessed using a fibroblast cell-attachment assay. The encapsulation efficiency for FIII9'-10 was 25% when using PVA, compared to 50-60% when using Igepal CA-630 or Triton-X100, with values below for the other surfactants. FIII9'-10 released from microspheres promoted cell attachment in a concentration-dependent manner, only Igepal CA-630 and Triton X-100 maintaining near-maximal cell attachment, indicating that the conformation of the relatively unstable FIII9' domain was preserved. All non-ionic surfactants reduced microsphere surface porosity, compared to PVA, and an increasing surface rugosity (leading to minor 'ridges') could be correlated with decreasing surfactant HLB. Low surface porosities did not effect the diffusion of FIII9'-10 from the microspheres' internal pores in a 'burst release', as may have been imagined. In summary, non-ionic surfactants should be considered over PVA for the maintenance of biological activity of conformationally labile proteins during encapsulation.
 ...
PMID:Controlled release of the fibronectin central cell binding domain from polymeric microspheres. 1502 66

The present paper reports on the influence of sintering temperature on the porosity and strength of porous hydroxyapatite (HA). HA powder was first prepared by the sol-gel precipitation method using calcium hydroxide and ortho-phosporic acid. The fine HA powder, measuring <50 microm was then mixed into a slurry with the addition of binder agent, being a mixture of sago and PVA. A small amount of sodium dodecyl sulphate was also used as a foaming agent. Porous HA samples were then prepared via slip casting technique. The surface morphology of the sintered samples was observed under scanning electron microscopy at 20 kV and the compositions were determined via SEM-EDX. A universal testing machine was used to determine the compaction strength of the sintered samples.
 ...
PMID:The influence of sintering temperature on the porosity and strength of porous hydroxyapatite ceramics. 1546 66


1 2 3 4 5 6 7 8 9 10 Next >>