Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0432222 (SEM)
 47,337 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Used rotary nickel-titanium instruments require frequent replacement. This laboratory study evaluated defects of GT Rotary instruments before and after usage. The instruments were fixed into custom-made holders and photographed in an SEM at x 260 to x 12,000 magnification at preset points. Instrument sizes 20 with 1.0, 0.8, and 0.6 taper and instrument sizes 35 with 1.2 taper were used in 12 canals. The used instruments were cleaned and then reexamined in an SEM as before. The presence of 11 types of conditions was scored from the pre- and postusage photographs. No instruments fracturing or plastic deformation was observed during the test. The presence of debris, pitting, and scraping changed significantly. Imperfections were found on used GT Rotary instruments and the presence of defects (pitting, scraping, and blunt-cutting edges) increased in all of the instruments. The behavior of GT Rotary instruments with usage seems to be different, compared with that found in other instruments.
 ...
PMID:Defects in GT rotary instruments after use: an SEM study. 1177 91

1. The aim of the present study was to determine whether or not the class Ia anti-arrhythmic agent quinidine modulates ionic current (INaCa) generated by the sarcolemmal Na+-Ca2+ exchanger of adult ventricular cardiac myocytes. 2. Selective whole-cell voltage-clamp recordings of INaCa were made from guinea-pig ventricular myocytes, with major interfering currents blocked. The INaCa was measured as the ionic current sensitive to 10 mmol/L external Ni2+ during a descending voltage ramp protocol. 3. The effects of quinidine concentrations in the range 10-100 micromol/L were studied. Quinidine produced a concentration-dependent partial blockade of outward INaCa, generated by reverse-mode exchange. At +60 mV, 100 micromol/L quinidine blocked INaCa by 33.0 +/- 4.1% (mean+/-SEM; n = 4). This was the maximal concentration that we were able to test, because concentrations of quinidine higher than 100 micromol/L were found to be toxic to cells under our conditions. The drug did not produce any significant inhibition of inward INaCa (generated by forward-mode exchange). 4. The Ni2+-insensitive residual current was not significantly altered by quinidine at any membrane potential, confirming that the inhibitory effects of quinidine we observed could be attributed to an action on the Na+-Ca2+ exchanger. 5. For the purpose of comparison, quinidine was tested against L-type Ca current (ICa,L). It blocked peak ICa,L at 0 mV, with an IC50 of 14.9 +/- 1.5 micromol/L. Thus, quinidine was less potent against the exchanger than against ICa,L. 6. Our data suggest that quinidine preferentially inhibits the Naout/Cain mode of exchanger function. We conclude that this drug is a weak inhibitor of ventricular INaCa and that the inhibitory effect is mode dependent.
 ...
PMID:Mode-dependent inhibition by quinidine of Na+-Ca2+ exchanger current from guinea-pig isolated ventricular myocytes. 1216 41

In the present paper, a study on laboratory scale to perform a treatment for valuable metals recovery from electronic and galvanic industrial wastes, is reported. The characterisation of the waste, performed by XRD, SEM, EDX and chemical analysis, showed a high metals content in the sludge, such as Cu, Ni, Mn, Pb, Sn, W. A leaching process, coupled by electrowinning, is then proposed in order to reduce the volume of the waste material and to recover selectively valuable metals, such as Cu and Ni. During the leaching step, carried out by using H(2)SO(4), several factors were investigated (acid concentration, temperature and time of treatment). The leached liquor has been successfully treated with an electrowinning process, to recover copper and nickel. The copper and nickel depositions, were performed in acid and alkaline conditions, respectively. The Faraday yield was of about 95%. The energy consumption was 2.13 and 4.43 kWh per kg of copper and nickel recovered, respectively. At the end of the process, about 94-99% of the initial content of Cu and Ni was recovered at the cathode. The experimental results obtained, showed the technical feasibility of the process.
 ...
PMID:Recovery of valuable metals from electronic and galvanic industrial wastes by leaching and electrowinning. 1273 66

A new austenitic stainless steel compound, P558, has been widely recognized to have good mechanical properties, excellent potential for corrosion resistance and negligible nickel ion release, making it a promising substitute for more expensive metallic prostheses with limited machinable features. The effect of P558 was studied in vitro and human osteoblast- like cells (MG63) were cultured directly on P558, Ti6Al4V alloy (Ti), and polystyrene (Control) for 72 hours. Osteoblast functions were evaluated by assaying cell proliferation and synthetic activity after 1.25(OH)2D3 stimulation. Results demonstrated that growth of MG63 on P558 was not negatively affected when compared to the Ti and Control groups and showed no alteration in the production of ALP, NO and PICP. Moreover, IL-6 was lower, whereas OC and TGFbeta1 were significantly higher. SEM images revealed that cells proliferated and differentiated on P558 without any alteration in their morphology. The current findings have demonstrated that P558 promotes osteoblast proliferation, activation and differentiation without negative effects and, thus, its good biocompatibility when used for orthopedic application.
 ...
PMID:Biomaterials in orthopedic surgery: effects of a nickel-reduced stainless steel on in vitro proliferation and activation of human osteoblasts. 1463 13

The metalloprotease ADAMTS-13 cleaves von Willebrand factor (VWF) at the Y842/M843 peptide bond located in the A2 domain. Measurement of ADAMTS-13 activity is a clinical utility for thrombotic diseases, but the current assays used for diagnostic and clinical research are non-physiological and time consuming. We have expressed in bacteria a recombinant VWF-A2 peptide (aa 718-905) that contains both a 6xHis tag at the N-terminal end and a Tag-100 epitope at the C-terminal end. Diluted plasma was mixed with the VWF-A2 peptide and digestion was allowed to proceed in a Ni2+-coated microtiter well plate for 2 h. The immobilized Ni2+ captures the VWF-A2 peptide by its 6xHis tag and cleavage of the A2 peptide is measured by the removal of the C-terminus fragment of the A2 peptide that contains the Tag-100. The cleavage activity for this assay was defined by the low detection of A2 peptide containing the Tag-100 epitope by the antiTag-100 monoclonal antibody. The assay was completed in <5 h. We then used the assay to analyze ADAMTS-13 activity in plasma from 39 healthy donors and 16 samples from patients diagnosed as thrombotic thrombocytopenic purpura. The average of enzyme activity +/- SEM for normal plasmas diluted 1 : 50 was 40 +/- 4.2% while the value obtained for the patients was 2.4 +/- 0.7%. These results were validated by a traditional long incubation assay (24 h). Our assay provides significant advantages over currently used assays because it is quicker, reproducible, cost effective and measures ADAMTS-13 activity under physiological and non-denaturing conditions. This assay is clinically useful and significant in measuring ADAMTS-13 activity in plasma.
 ...
PMID:ADAMTS-13 activity in plasma is rapidly measured by a new ELISA method that uses recombinant VWF-A2 domain as substrate. 1500 67

Nanofiber formation of dipeptide-based bolaamphiphiles, bis (N-alpha-amide--valyl--valine) 1,n-alkane dicarboxylate (n=6, 8, 10, and 12) in water was analyzed by TEM, SEM, IR, and XRD. The bolaamphiphiles proved to be coordinated to divalent transition-metal cations, such as Co2+, Ni2+, Cu2+, and Zn2+, giving precipitates, colloidal dispersions (loose hydrogels), and hydrogels upon self-assembly at 23 or 70 degrees C. Longer oligomethylene chains and strong interaction between the metal cations and the carboxylate anions are responsible for the hydrogel formation. Energy-filtering transmission electron microscopy (EF-TEM) and field-emission scanning electron microscopy (EF-SEM) images revealed that the colloidal dispersions and the hydrogels consist of a large number of nanofibers with widths of 15-20 nm and lengths of several micrometers. FT-IR and powder XRD measurement supported the existence of a beta-sheet structure-based nanofibers complexing with metal cations.
 ...
PMID:Metal-complexed nanofiber formation in water from dicarboxylic valylvaline bolaamphiphiles. 1508 73

Available information on soil contamination by trace elements in the Sudbury Cu/Ni mining and smelting region consists largely of total elemental concentration data. Little is known about the mode of occurrence and behaviour of Cu and Ni (the main metallic contaminants) in the soils of the region. In this study, sequential extraction and Scanning Electron Microscopy and Energy Dispersive X-ray Analysis (SEM/EDX) observations were complementarily used to define Cu and Ni forms in the Sudbury soils, so as to assess metal mobility. Most Cu (on average 75%) was associated with 'non-residual' soil forms, whereas Ni was mainly (on average 60%) associated with inorganic 'residual' forms of a sulphide and oxide nature. Therefore, Cu occurs in the soils in more mobile forms than Ni. Consequently, Cu should be removed from these soils at a faster rate than Ni. This is an unusual finding, because generally Ni is known to be more mobile in soils than Cu. SEM/EDX analysis confirmed the greater Cu mobility by showing that the metal was strongly associated with organic matter and was homogeneously distributed on the clay fraction surfaces. Nickel occurred alone or was associated with Fe oxides in various size fractions. Both elements were found as sulphides but Ni was often included in the silicate matrices of spherical particles in associations with Fe. SEM/EDX observations have shown that Cu and Ni are associated with soil forms which would not have been predicted by the sequential extraction alone, such as carbonaceous material, silicate spheres and carbonate particles, supporting complementary use of the two techniques.
 ...
PMID:Chemical and mineralogical forms of Cu and Ni in contaminated soils from the Sudbury mining and smelting region, Canada. 1509 49

Free-base, nickel(II), zinc(II) and iron(III) mono(4-aniline-ethynyl)biphenylporphines (AEBPPs) were synthesized and their electro-polymerization reactions were studied. Electrochemical and UV-Visible experiments showed that AEBPPs were electro-polymerized onto Pt and indium tin oxide (ITO) surfaces without significantly changing their redox and spectral properties. This suggests that the pi-conjugations of these porphyrins were not greatly affected upon electro-polymerization. SEM images indicated the formation of porphyrin films on the electrode surfaces, while EDS spectra of the metallo-AEBPP films confirmed deposits of the corresponding metals. Upon closer inspection, the AFM images revealed nano-scale fine structure of these porphyrin films. Both SEM and AFM images of the porphyrin films showed similar trends of porphyrin accumulation.
 ...
PMID:Synthesis, electrochemistry, absorption and electro-polymerization of aniline-ethynyl metalloporphyrins. 1561 32

Transition metals like nickel, cobalt and iron have been often used as solvent catalysts in high pressure high temperature (HPHT) synthesis of diamond, and nickel and cobalt ions have been found in diamond lattice. Available studies indicated that nickel and cobalt ions could enter the lattice as interstitial or substitutional impurities and form complexes with nitrogen. Polarized microscopy, SEM-EDS, EPR, PL and FTIR have been used in this study to investigate six fancy color natural and synthetic diamonds in order to determine the spectroscopic characteristics and the existing forms of transition metal ions in colored diamond lattice. Cobalt-related optical centers were first found in natural chameleon diamonds, and some new nickel and cobalt-related optical and EPR centers have also been detected in these diamond samples.
 ...
PMID:[Spectroscopic studies on transition metal ions in colored diamonds]. 1576 67

The chromium(III) phosphate was observed to have a high affinity towards Pb2+ ion and the sorption capacities were found to be in the order: Pb2+ > Cu2+ > Cd2+ > Ni2+. Different characterization methods i.e. FTIR, SEM and EDX were employed to investigate the sorption mechanism of Pb2+ by chromium(III) phosphate, which showed that no new solid phases were present in the residue after sorption of Pb2+. The exchange between protons from the surface and Pb2+ from solutions was found to be responsible for Pb2+ sorption by chromium (III) phosphate.
 ...
PMID:Ion exchange sorption of Pb2+ ions on CrPO4. 1590 86


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>