Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0432222 (SEM)
 47,337 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Hydrogels composed of collagen and hyaluronic acid are types of crosslinked water-swellable polymers and possess vast potential for applications in the medical industry. Collagen (Co) is the major structural protein of connective tissues such as skin, tendon and cartilage. Hyaluronic acid (HA) is a non-immunogenic, non-adhesive glycosaminoglycan that has a high water absorption property and plays significant roles in several cellular processes. The purpose of this study is to prepare a collagen (Co)-modified hyaluronic acid (MHA) hydrogel and investigate its potential utility for biomedical products such as wound dressing materials. Collagen (Co, type I) was obtained from pig skin and mucopolysaccharide-HA was modified by a poly (ethylene glycol) diglycidyl ether (PEGDGE) crosslinker. Thermal stability, swelling behavior, and mechanical strength of Co-MHA hydrogel according to different mass ratios of Co and MHA in hydrogel networks were investigated. The physical properties of the hydrogel were measured by SEM, Differential Scanning Calorimetry (DSC), Thermal Gravity Analysis (TGA), and a Universal Testing Machine (UTM). The cell viability of Co-MHA hydrogel was also evaluated using an in vitro MTT assay.
 ...
PMID:Preparation and properties of collagen/modified hyaluronic acid hydrogel for biomedical application. 1804 73

Nanocrystalline diamond (NCD) has a great potential for prosthetic implants coating. Nevertheless, its biocompatibility still has to be better understood. To do so, we employed several materials characterization techniques (SEM, AFM, micro-Raman spectroscopy) and cell culture assays using MG63 osteoblast-like and human bone marrow cells. Biochemical routines (MTT assays, Lowry's method, ALP activity) supported by SEM and confocal microscopy characterization were carried out. We used silicon nitride (Si3N4) substrates for NCD coatings based on a previous demonstration of the superior adhesion and tribological performance of these NCD coated ceramics. Results demonstrate an improved human osteoblast proliferation and the stimulation of differentiated markers, like ALP activity and matrix mineralization, compared with standard polystyrene tissue culture plates. The nanometric featuring of NCD, associated to its chemical affinity are key points for bone regeneration purposes.
 ...
PMID:Nanocrystalline diamond: In vitro biocompatibility assessment by MG63 and human bone marrow cells cultures. 1808 49

Covalent immobilization of collagen onto poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) film was achieved to improve its cell compatibility. Amide groups photografted on PHBV films were initially converted into amine groups through Hofmann degradation and collagen was then chemically bonded to amine groups, consequently forming the amide, amine, and collagen-modified PHBV. The structures of these modified PHBV films were confirmed by ATR-FTIR, XPS, and SEM analyses. Compared with that of PHBV film, surface wettability of the modified PHBV films enhanced remarkably. In particular, water contact angle of the collagen-modified PHBV film decreased from 65.0 degrees to 2.1 degrees within 130 s. Sheep chondrocytes cultured on PHBV and modified PHBV films were evaluated by cell adhesion test, MTT assay, and morphological observation under SEM. Results showed that the collagen-modified PHBV film had better cell adhesion and proliferation than other modified PHBV films and PHBV film. Chondrocytes on the collagen-modified PHBV film adhered through filopodia, spread by cytoplasmic webbing, and formed cells layer earlier than other modified ones, indicating that the collagen-modified PHBV is a promising biomaterial for cartilage tissue engineering.
 ...
PMID:Surface engineering of PHBV by covalent collagen immobilization to improve cell compatibility. 1831 94

A biocomposite of hydroxyapatite (HAp) with electrospun nanofibrous scaffolds was prepared by using chitosan/polyvinyl alcohol (CS/PVA) and N-carboxyethyl chitosan/PVA (CECS/PVA) electrospun membranes as organic matrix, and HAp was formed in supersaturated CaCl2 and KH2PO4 solution. The influences of carboxylic acid groups in CECS/PVA fibrous scaffold and polyanionic additive poly(acrylic acid) (PAA) in the incubation solution on the crystal distribution of the HAp were investigated. Field-emission scanning electron microscopy (FE-SEM), energy-dispersive spectroscopy (EDS), wide-angle X-ray diffraction (WAXD), and Fourier transform infrared (FTIR) were used to characterize the morphology and structure of the deposited mineral phase on the scaffolds. It was found that addition of PAA to the mineral solution and use of matrix with carboxylic acid groups promoted mineral growth and distribution of HAp. MTT testing and SEM imaging from mouse fibroblast (L929) cell culture revealed the attachment and growth of mouse fibroblast on the surface of biocomposite scaffold, and that the cell morphology and viability were satisfactory for the composite to be used in bioapplications.
 ...
PMID:In situ mineralization of hydroxyapatite on electrospun chitosan-based nanofibrous scaffolds. 1832 11

The objective of this study was to develop an engineered rat hyaline cartilage by culturing articular chondrocytes on three-dimensional (3D) macroporous poly(DL-lactic-co-glycolic acid) (PLGA) sponges under chondrogenic induction and microgravity bioreactor conditions. Experimental groups consisted of 3D static and dynamic cultures, while a single cell monolayer (2D) served as the control. The effect of seeding conditions (static vs. dynamic) on cellularization of the scaffolds was investigated. MTT assay was used to evaluate the number of viable cells in each group at different time points. Formation of a hyaline-like cartilage was evaluated for up to 4 weeks in vitro. While 2D culture resulted in cell sheets with very poor matrix production, 3D culture was in the favor of tissue formation. A higher yield of cell attachment and spatially uniform cell distribution was achieved when dynamic seeding technique was used. Dynamic culture promoted cell growth and infiltration throughout the sponge structure and showed the formation of cartilage tissue, while chondrogenesis appeared attenuated more towards the outer region of the constructs in the static culture group. Medium supplemented with TGF-beta 1 (5 ng/ml) had a positive impact on proteoglycan production as confirmed by histochemical analyses with Alcian blue and Safranin-O stainings. Formation of hyaline-like tissue was demonstrated by immunohistochemistry performed with antibodies against type II collagen and aggrecan. SEM confirmed higher level of cellularization and cartilage tissue formation in bioreactor cultures induced by TGF-beta 1. The data suggest that PLGA sponge inside rotating bioreactor with chondrogenic medium provides an environment that mediates isolated rat chondrocytes to redifferentiate and form hyaline-like rat cartilage, in vitro.
 ...
PMID:Engineering of rat articular cartilage on porous sponges: effects of tgf-beta 1 and microgravity bioreactor culture. 1843 89

A porous 3D scaffold was developed to support and enhance the differentiation process of mesenchymal stem cells (MSC) into osteoblasts in vitro. The 3D scaffold was made with chitosan, gelatin and chondroitin and it was crosslinked by EDAC. The scaffold physicochemical properties were evaluated. SEM revealed the high porosity and interconnection of pores in the scaffold; rheological measurements show that the scaffold exhibits a characteristic behavior of strong gels. The elastic modulus found in compressive tests of the crosslinked scaffold was about 50 times higher than the non-crosslinked one. After 21 days, the 3D matrix submitted to hydrolytic degradation loses above 40% of its weight. MSC were collected from rat bone marrow and seeded in chitosan-gelatin-chondroitin 3D scaffolds and in 2D culture plates as well. MSC were differentiated into osteoblasts for 21 days. Cell proliferation and alkaline phosphatase activity were followed weekly during the osteogenic process. The osteogenic differentiation of MSC was improved in 3D culture as shown by MTT assay and alkaline phosphatase activity. On the 21st day, bone markers, osteopontin and osteocalcin, were detected by the PCR analysis. This study shows that the chitosan-gelatin-chondroitin 3D structure provides a good environment for the osteogenic process and enhances cellular proliferation.
 ...
PMID:3D chitosan-gelatin-chondroitin porous scaffold improves osteogenic differentiation of mesenchymal stem cells. 1845 45

Poly(lactic acid) (PLA) was modified by maleic anhydride (MAH), then the resultant MAH modified PLA (MPLA) was acylated with ethylenediamine (EDA), so EDA-MAH modified PLA (EMPLA) was prepared. The results of DSC, FT-IR and NMR testified that MAH and EAD were successfully introduced into the original polymer. The hydrophilicity of EMPLA was considerably increased compared with that of PLA. The degradation experiment showed that the introduction of EDA into the original polymer could neutralize the carboxyl end groups of the degradation products. The results of SEM and MTT of rat osteoblasts cultured in vitro showed that the cytocompatibility and cell adhesion of the modified materials were significantly increased compared with the original polymer, especially EMPLA; the number of cells were obviously increased and cells attached firmly to the material; these were ascribed to the EDA neutralizing the carboxyl end groups of the degradation products.
 ...
PMID:Two-step modification of poly(D, L-lactic acid) by ethylenediamine-maleic anhydride. 1845 89

Corneal wound healing is one of the major issues in ocular surface reconstruction and ocular surface diseases. Amniotic membrane (AM) transplantation is an excellent treatment modality to promote corneal wound healing and treat corneal diseases. It is interesting and valuable to search for another synthetic and biocompatible substitute for the study of mechanism of AM and the treatment of ocular surface disorders. Chitosan, the second-most abundant polymer in nature, has many biological advantages such as biocompatibility, biodegradability, hemostatic activity, and wound-healing property to be used as biomedical applications. The purpose of this project is to evaluate the phenotype of cultured corneal epithelial cells in vitro on synthetic chitosan membrane (CM). We cultivated bovine corneal epithelial cells on CM and AM, and then evaluated their phenotypes. The viability of the respective cell cultures was investigated using the 3-[4,5-dimethylrhiazol-2-yl]-2,5-diphenyl tetrazolium bromide (MTT) assay. The cytotoxicity of CM and AM to corneal epithelial cells was evaluated by lactate dehydrogenase (LDH) assay. The morphology of cultivated corneal epithelial cells on CM and AM was observed by scanning electron microscopy. Additionally, immunocytochemical stainings were used to confirm the phenotype of corneal epithelial cells. In MTT and LDH assays we found that the CM can support the growth of cultured corneal epithelial cells in good condition with minimal toxicity. The SEM and immunohistocytochemistry showed that the phenotype of corneal epithelial cells is compatible with that of AM. We conclude that the CM has the potential to be a suitable biomaterial for treating ocular surface disorders.
 ...
PMID:The phenotype of bovine corneal epithelial cells on chitosan membrane. 1848 92

Periodontal tissue engineering is expected to overcome the limitations associated with the existing regenerative techniques for the treatment of periodontal defects involving alveolar bone, cementum, and periodontal ligament. Cell-based tissue engineering approaches involve the utilization of in vitro expanded cells with regenerative capacity and their delivery to the appropriate sites via biomaterial scaffolds. The aim of this study was to establish living periodontal ligament cell-containing structures on electrospun poly(DL-lactic-co-glycolic acid) (PLGA) nanofiber membrane scaffolds, assess their viability and characteristics, and engineer multilayered structures amenable to easy handling. Human periodontal ligament (hPDL) cells were expanded in explant culture and then characterized morphologically and immunohistochemically. PLGA nanofiber membranes were prepared by the electrospinning process; mechanical tensile properties were determined, surface topography, nanofiber size, and porosity status were investigated with SEM. Cells were seeded on the membranes at approximately 50,000 cell/cm(2) and cultured for 21 days either in expansion or in osteogenic induction medium. Cell adhesion and viability were demonstrated using SEM and MTT, respectively, and osteogenic differentiation was determined with IHC and immunohistomorphometric evaluation of osteopontin, osteocalcin, and bone sialoprotein marker expression. At days 3, 6, 9, and 12 additional cell/membrane layers were deposited on the existing ones and multilayered hybrid structures were established. Results indicate the feasibility of periodontal ligament cell-containing tissue-like structures engineering with PDL cells and electrospun nanofiber PLGA scaffolds supporting cell adhesion, viability and osteogenic differentiation properties of cells in hybrid structures amenable to macroscopic handling.
 ...
PMID:Periodontal ligament cellular structures engineered with electrospun poly(DL-lactide-co-glycolide) nanofibrous membrane scaffolds. 1849 92

Electricity has a long history of being used as an alternative clinical treatment and as an effective approach to modifying cellular behaviours in vitro. It has been difficult, however, to take advantage of this modality in tissue generation because of the lack of suitable conductive, biocompatible scaffolding materials. In this study, in order to electrically regulate cell activities, a largely biodegradable conductor made of 5% conductive polypyrrole and 95% biodegradable poly(L-lactide) (PPy/PLLA) was prepared. Human cutaneous fibroblasts were cultured on the conductors in the presence or absence of a direct current (DC) electrical field (EF) of 50 mV/mm. The growth of the cells was characterized using fluorescent staining, SEM, and a MTT assay. The RNA expressions of interleukin-6 (IL-6) and interleukin-8 (IL-8) were assayed by RT-PCR. The amounts of IL-6 and IL-8 secreted by the fibroblasts were quantified by ELISA. The results showed that the PPy/PLLA conductors supported cell adhesion, spreading, and proliferation in both the presence and absence of the EF. Electrical stimulation (ES) applied through PPy/PLLA conductors dramatically enhanced cytokine secretion approximately 10-fold when compared to the non-ES controls. This effect lasted several days after the end of the ES. These findings highlight for the first time the possibility of a potent, effective approach to regulating tissue regeneration in conductive scaffolds through ES-modulated cytokine secretion, and to increasing cytokine productivity for biotechnological applications.
 ...
PMID:The regulation of cell functions electrically using biodegradable polypyrrole-polylactide conductors. 1860 89


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>