Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0432222 (SEM)
 47,337 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

A mixture with different compositions of HA and TCP were synthesize in this work by precipitation method using Ca(NO3)2 4H2 and (NH4)2HPO4 as the starting materials. A mixture with HA and TCP phases in different ratios were produced. The powders were sintered from 1000 degrees C to 1250 degrees C. The phase compositions of the mixtures were then studied via XRD. This work shows that the pH value determines the different phase compositions of the HA-TCP mixture. Chemical analyses were carried out by FTIR. The microstructure was observed under SEM.
 ...
PMID:Hydroxapatite and tricalcium phosphate prepared by precipitation method. 1546 65

1. The aim of the present study was to determine whether the steady state NOx concentration reflects NOx formation in vivo. 2. A NO3- load study was performed after achieving NOx steady state. Chronological changes in NOx concentrations in plasma and whole blood samples from nine healthy subjects were determined by the HPLC-Griess system and NOx concentrations in erythrocytes were estimated as a possible NOx compartment influential in regulating plasma NOx concentrations. 3. Analysis was performed using the first-order one-compartment open model and the NOx formation rate was subsequently calculated. 4. The mean (+/-SEM) steady state NOx concentration of plasma (15.5 +/- 1.6 micromol/L), whole blood (12.8 +/- 1.2 micromol/L) and erythrocytes (11.9 +/- 0.7 micromol/L) did not correlate with the NOx formation rate in the compartments (0.50 +/- 0.05, 0.61 +/- 0.04 and 0.91 +/- 0.17 micromol/kg per h, respectively), whereas a significant correlation was found between the steady state NOx concentration and NOx elimination rate (Kel) in plasma (r=-0.69; P=0.04) and whole blood (r=-0.79; P=0.01). 5. Although there was no direct correlation between steady state NOx concentrations and serum creatinine levels, the correlation between half-life and serum creatinine levels was significant (plasma: r=0.60, P=0.02; whole blood: r=0.49, P=0.04). 6. Plasma NOx concentrations correlated significantly with erythrocyte NOx concentrations (r=0.92, P <0.01; erythrocyte NOx=0.66 x plasma NOx). 7. The results of the present study indicate that NOx does not accumulate excessively into erythrocytes at steady state and during a NO3- load and that the steady state NOx concentration in whole blood and plasma preferentially implies NOx elimination (mainly depending on renal function) rather than NOx formation.
 ...
PMID:Implication of steady state concentrations of nitrite and nitrate metabolites of nitric oxide in plasma and whole blood in healthy human subjects. 1547 65

Nano-crystalline Co3O4 and CoO powders have been prepared by a spray pyrolysis approach. The effects of the reaction temperature and initial salts on the crystallinity and phase composition have been studied. Based on the TEM and XRD results, the crystal sizes were in the range of 1-10 nm. SEM and TEM observations also reveal that the nano-powders easily create micron-scale spherical agglomerates. The Co3O4 powders obtained by spraying nitrate solution at 500 degrees C show high specific surface area, which according to the BET method is 82.37 m2/g. The time/temperature phase diagram of cobalt oxides developed from XRD and DTA/TGA analyses shows the existence of a CoO phase at low and high temperature ranges when some specific preparation conditions are applied.
 ...
PMID:In-situ fabrication of nanostructured cobalt oxide powders by spray pyrolysis technique. 1557 Sep 73

The aim of this study was to compare the nanoleakage patterns of the resin-dentin interfaces of three dentin bonding systems at both TEM and field emission in lens SEM (FEI-SEM) levels. A standardized smear layer was created with 180-grit silicon carbide paper (SiC) on dentin disks obtained from 18 noncarious human third molars. Specimens were randomly divided into three groups and bonded with a two-step total etching adhesive (Single Bond, SB), a two-step, self-etching adhesive (Clearfil SE BOND, SEB), and a one-step, self-etching adhesive (XENO III, XEIII). Nanoleakage was evaluated by using an ammoniacal silver-nitrate solution. Specimens were processed for TEM and FEI-SEM observation. The TEM of SB revealed silver deposits in adhesive and hybrid layers (HL). High-magnification FEI-SEM micrographs clearly identified these deposits as spherical clusters mainly associated with nonembedded collagen fibrils. TEM and FEI-SEM examination of SEB revealed some clusters of silver deposits within porosities and small channels of the HL. Additional silver deposits were observed between the peritubular dentin walls and the resin tags. XEIII revealed very fine and diffuse silver grains throughout the entire HL. SEM visualization of nanoleakage at a high level of resolution has not been previously described. FEI-SEM technology supported the TEM visualization with three-dimensional morphological data of the relations between the HL constituents and nanoleakage. The results of the present study confirm the hypothesis that both total- and self-etch adhesives are not able to fully infiltrate the dentin substrate.
 ...
PMID:Nanoleakage within the hybrid layer: a correlative FEISEM/TEM investigation. 1567 95

Composite ceria/silica materials of 10 and 20% (w/w) were prepared by calcination, at 650 degrees C for 3 h, of the xerogels obtained by mixing the corresponding amount of a ceria precursor with freshly prepared sols of spherical silica particles (Stober particles) in their mother liquors. Two different ceria precursors were examined in this investigation. The first was a gel produced by the prehydrolysis of cerium(IV) isopropoxide in isopropanol medium, and the second was an aqueous solution of cerium(IV) ammonium nitrate. Different textural and morphological characteristics that developed by calcination were investigated by TGA, FTIR, XRD, SEM, and analyses of N2 adsorption isotherms. The results indicated that ceria dispersion and formation of mesoporous textural composite materials produced by the second precursor, cerium(IV) ammonium nitrate, are better than those produced by the first precursor, prehydrolyzed cerium(IV) isopropoxide. The results are discussed in terms of the effect of precursors and mixing media on nucleation and growth of ceria particles and their protection from sintering on calcination at the test temperature.
 ...
PMID:Formation and characterization of different ceria/silica composite materials via dispersion of ceria gel or soluble ceria precursors in silica sols. 1592 20

Hydroxylated fullerene reacts rapidly and irreversibly (across a wide pH range) with Fe(NO3)3, Al(NO3)3, CaCl2, CoCl2, CuCl2, KMnO4, Ag(NO3), and ZnCl2 under ambient aqueous conditions to produce insoluble metal-hydroxyfullerene cross-linked polymers (M-fullerenol). Materials have been characterized by SEM, TEM, AFM, XPS, and UV-visible spectroscopy. Molecular mechanics calculations on the model systems, [Fe(C60O2)2] and [Fe(C60O2)3], show that both tetrahedral and octahedral coordination are possible. The rate of precipitation reaction is proportional to the concentration of both reagents. The interaction of hydroxyfullerenes with metals is an important issue with regard to waste treatment, fullerene exposure in the environment, and fullerene-based pharmaceutical agents.
 ...
PMID:Reaction of hydroxyfullerene with metal salts: a route to remediation and immobilization. 1604 11

In this study, both atmospheric particulates and dry deposited particulates were collected at a highway intersection, coastal location and suburban area in Taichung, Taiwan for the characterization of nitrate containing particulates (NCPs) in size distribution and dynamic properties. Collected particulates were placed in contact with nitron (C20H16N4) to form distinctive products of NCPs, which were examined by a SEM. For total atmospheric particulates, the sum of NCP and non-nitrate containing particulate (NNCP), the average shape factor values are 1.69, 1.49, and 1.36 for the highway intersection, coastal area and suburban area, respectively. The calculated shape factors show no significant differences with sizes. Dry deposition fluxes and atmospheric concentrations at various size ranges were estimated. The mass distributed in fine particle range (<or=2.5 microm) were 45%, 40%, and 43% for NCP at the highway intersection, coastal, and suburban areas, respectively. The average dry deposition velocities (Vds) of total particulate are 2.5, 1.5, and 1.2 cm s(-1) for highway intersection, coastal area, and suburban area, respectively. The highest Vd was observed from samples taken at highway intersection, suggesting that dust resuspension and particulates from vehicles in the ambient air is of great significance. The Vds of total particulates range over three orders of magnitude for size ranges from 0.32 to 18 microm. The value of Vd increases with the diameter of particles significantly.
 ...
PMID:Determination of atmospheric nitrate particulate size distribution and dry deposition velocity for three distinct areas. 1605 14

We have studied the phenomenon of calcium complexation by lab synthesized amphiphilic (alpha-aminoalkyl)-phosphonocarboxylic or -phosphonic acids. The electrical conductivity of aqueous solutions of sodium salts of all these acids was measured versus the volume of a calcium salt solution added. It appeared that calcium complexes are formed in a Ca/P atomic ratio close to 1. Calcium phosphonocarboxylates and calcium phosphonates were also precipitated by mixing aqueous solutions of disodium salts of phosphorus amphiphiles and calcium nitrate solutions. Before chemical analysis, these complexes were calcined to remove the organic part. In the mineralized products, calcium and phosphate were assayed: the Ca/P atomic ratio was equal to 1. X-ray diffraction and IR spectroscopy showed that they are made entirely of beta pyrophosphate (Ca2P2O7), a result in agreement with previous chemical analysis. The chemical formula of the starting calcium complexes could be written as CaL2H2O (L=ligand). The SEM micrographs of these complexes show plate-like structures. XRD patterns are characteristic of layered structures. These facts suggest that calcium complexes are composed of alternating bimolecular layers of calcium alkylphosphonocarboxylates or calcium alkylphosphonates, the chains being tilted and partially interdigitated.
 ...
PMID:Preparation and characterization of new hybrid organic/inorganic systems derived from calcium (alpha-aminoalkyl)-phosphonates and -phosphonocarboxylates. 1611 33

This study presents, for the first time, field evidence of complete, irreversible processing of solid calcium carbonate (calcite)-containing particles and quantitative formation of liquid calcium nitrate particles apparently as a result of heterogeneous reaction of calcium carbonate-containing mineral dust particles with gaseous nitric acid. Formation of nitrates from individual calcite and sea salt particles was followed as a function of time in aerosol samples collected at Shoresh, Israel. Morphology and compositional changes of individual particles were observed using conventional scanning electron microscopy with energy dispersive analysis of X-rays (SEM/EDX) and computer controlled SEM/EDX. Environmental scanning electron microscopy (ESEM) was utilized to determine and demonstrate the hygroscopic behavior of calcium nitrate particles found in some of the samples. Calcium nitrate particles are exceptionally hygroscopic and deliquesce even at very low relative humidity (RH) of 9-11% which is lower than typical atmospheric environments. Transformation of non-hygroscopic dry mineral dust particles into hygroscopic wet aerosol may have substantial impacts on light scattering properties, the ability to modify clouds and heterogeneous chemistry.
 ...
PMID:Direct observation of completely processed calcium carbonate dust particles. 1616 98

Atomic force microscopy (AFM) and scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS) have been used for both morphological and elemental mass analysis study of atmospheric particles. As part of the geometrical particle analysis, and in addition to the traditional height profile measurement of individual particles, AFM was used to measure the volume relative to the projection area for each particle separately, providing a particle shape model. The element identification was done by the EDS analysis, and the element mass content was calculated based on laboratory calibration with particles of known composition. The SEM-EDS mass measurements from two samples collected at 150 and 500 m above the surface of the Mediterranean Sea were found to be similar to mass calculations derived from the AFM volume measurements. The AFM results show that the volume of most of the aerosols that were identified as soluble marine sulfate and nitrate aerosol particles can be better estimated using cylindrical shapes than spherical or conical geometry.
 ...
PMID:Atomic force and scanning electron microscopy of atmospheric particles. 1622 85


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>