Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0432222 (SEM)
 47,337 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Indian fly ash has been completely converted to crystalline porous 13X zeolite by NaOH fusion at 600 degrees C followed by hydrothermal treatment at 105 degrees C for 20 h. Obtained materials were characterized by XRD, SEM and surface area measurement. Prepared material was used for the sorption study of different metal ions (Cu(2+), Co(2+) and Ni(2+)) at different pH, temperature. Thermodynamic data (DeltaS, DeltaH and DeltaG) corresponding to different metal ion uptake were evaluated from Langmuir equation. In all the experiment sorption capacity of prepared zeolite was found to be quite high than that of fly ash at acidic pH. However, the uptake selectivity order for both the materials is Cu(2+)>Co(2+)>Ni(2+).
 ...
PMID:Studies on sorption properties of zeolite derived from Indian fly ash. 1656 13

Element distribution in a combined fly ash and bottom ash from combustion of copper chromate arsenate (CCA) treated wood waste was investigated by scanning electron microscopy (SEM/EDX) before and after electrodialytic extraction. The untreated ash contained various particles, including pieces of incompletely combusted wood rich in Cr and Ca, and irregular particles rich in Si, Al and K. Cr was also found incorporated in silica-based matrix particles. As was associated with Ca in porous (char) particles, indicating that Ca-arsenates had been formed during combustion. Cu was associated with Cr in the incompletely combusted wood pieces and was also found in almost pure form in a surface layer of some matrix particles - indicating surface condensation of volatile Cu species. In treated ash, Ca and As were no longer found together, indicating that Ca-arsenates had been dissolved due to the electrodialytic treatment. Instead particles rich in Ca and S were now found, indicating precipitation of Ca-sulphates due to addition of sulphuric acid in connection with the electrodialytic treatment. Cu and Cr were still found associated with incompletely combusted wood particles and incorporated in matrix particles. Chemical analyses of untreated and treated ash confirmed that most As, but only smaller amounts of Cu and Cr was removed due to the electrodialytic extraction. Overall metal contents in the original ash residue were: 1.4 g As, 2.76 g Cu and 2.48 g Cr, after electrodialytic extraction these amounts were reduced by 86% for As, 15% for Cu and 33% for Cr.
 ...
PMID:Elemental analysis of ash residue from combustion of CCA treated wood waste before and after electrodialytic extraction. 1658 55

Osteoporosis, characterized by reduction in bone density, is a significant source of mortality among the elderly, particularly in oestrogen-deficient women. We studied the effect of Withania somnifera (WS) root extract (ethanolic), which contains oestrogen-like withanolides for anti-osteoporotic activity. Female Sprague-Dawley rats were either sham operated (n = 12) or ovariectomized (n = 12) and treated with WS/vehicle (65 mg kg(-1)), orally for 16 weeks (n = 12). All rats were allowed free access to a calcium-deficient diet (0.04% Ca) and distilled water. At termination, urinary excretion of calcium (Ca) and phosphorus (P) and serum levels of Ca, P and alkaline phosphatase (ALP) were measured. Femur and tibia bones were processed for histological (histology), morphological (scanning electron microscopy, SEM), biomechanical strength (impact test) and mineral composition (ash) analysis. Ovariectomized (OVX) rats showed a significant increase in serum ALP levels and urinary Ca and P excretion. Histological findings revealed narrowed, and disappearance of, trabeculae with widened medullary spaces in the OVX group. Ash analysis showed a reduction in ash weight, percent ash, ash Ca, ash P and ash magnesium levels in the OVX group. Further, SEM examination revealed metaphyseal bone loss in femurs and impact test showed a reduction in biomechanical strength of tibias in OVX rats. WS treatment markedly prevented the above changes in OVX rats and thus may be a potential agent in the treatment of osteoporosis.
 ...
PMID:Withania somnifera improves bone calcification in calcium-deficient ovariectomized rats. 1659 69

An experiment was conducted to study the effect of egg size on embryo development, heat production, and energy partitioning between egg and hatchling. Small (56.1 +/- 0.12 g SEM) and large (70.0 +/- 0.11 g SEM) hatching eggs were incubated in climate respiration chambers, and eggshell temperature was maintained constant at 37.8 degrees C in both egg weight classes by adjusting machine temperature. Dry matter, ash, protein, and fat contents were determined in albumen, yolk, yolk-free body (YFB), and residual yolk (RY), and carbohydrate contents and caloric values were calculated. To achieve a constant eggshell temperature, machine temperature needed to be set lower from d 15 onward, coinciding with increased heat production in large eggs compared with small eggs. Selective nutrient uptake resulted in higher fat content and lower protein content in RY in chicks that hatched from small eggs compared with large eggs. The respiration quotient in small and large eggs was the same, and embryos in small and large eggs were equally efficient in the transfer of energy from egg to YFB. The surplus availability of nutrients in large eggs was therefore held responsible for the absolute and relative higher weight of RY in chicks that hatched from large eggs compared with small eggs.
 ...
PMID:Effect of egg size on heat production and the transition of energy from egg to hatchling. 1661 62

The present study reports a green synthesis method for preparing pure (free of fly ash) and ordered MCM-41 materials from coal fly ash at room temperature (25 degrees C) during 24 h of reaction. It was shown that the impurities in the coal fly ash were not detrimental to the formation of MCM-41 at the tested conditions. The influence of initial synthesis pH on material properties of calcined MCM-41 samples was investigated by various techniques such as XRF, XPS, XRD, FTIR, DR-UV-vis, solid state NMR, N2 physisorption, TG-DTA, SEM and TEM. The experimental results showed that the amount of trace elements such as Al, Na, Ti and Fe incorporated into the sample increased with synthesis pH value. More aluminum species were incorporated with tetrahedral coordination in the framework under a high pH value. The particle size of the sample decreased with the synthesis pH value. Samples synthesized at high pH values had a larger pore size and were more hydrothermally stable than those at low pH values. From thermal analysis, it was observed that the synthesized MCM-41 samples showed a high thermal stability. These properties made the synthesized MCM-41 suitable for further processing into more useful materials in a wide range of applications.
 ...
PMID:Synthesis of MCM-41 from coal fly ash by a green approach: influence of synthesis pH. 1664 13

The influences of coal ash on the degradation of phenol in water were investigated under the stirring or ultrasonic irradiation conditions. Phenol solution (10mg/L, 100mL) was sonicated at 200 kHz and 200 W with or without coal ash (53-106 microm in particle size and concentration of 0.0-1.5 wt%). It was found that the sonochemical degradation of phenol in the presence of coal ash was faster than that in the absence of coal ash, and the optimum amount of coal ash was a maximum at 0.4-0.6 wt%. It was confirmed that the phenol degradation did not occur by the addition of hydrogen peroxide and nitric acid under the stirring conditions. The sonochemical degradation with coal ash was depressed by the addition of tertiary butyl alcohol as a radical scavenger. These results indicated that the coal ash accelerated the phenol degradation due to the increase in the amount of hydroxyl radicals under the ultrasonic irradiation. Since the coal ash used had a porous and uneven surface, which was observed by SEM, it was assumed that the coal ash led to the increase in the nucleation site for cavitation bubble due to its surface roughness.
 ...
PMID:Effect of coal ash on sonochemical degradation of phenol in water. 1673 37

PM(2.5) samples were collected simultaneously at three representative areas (central city, industrial area and clean air suburban) of Shanghai City. Their morphologies and elemental compositions were determined by scanning electron microscopy coupled with energy analysis (SEM-EDX). The particles were classified into four groups based on morphology and elemental composition. Soot aggregates and spherical fly ash particles were the two dominant types and they were identified as originating from automobile exhaust, metallurgical industry and coal combustion. The size distribution of the particles showed that most had diameters in the range of 0.2-1.4 microm. Individual particles were measured by synchrotron radiation micro-beam X-ray fluorescence (micro-SXRF) and the micro-SXRF spectra were obtained. Pattern recognition techniques, which took the micro-SXRF spectrum of a single aerosol particle as its fingerprint, were used to identify the origins of the particles. Seven source types were identified. They were: metallurgical industry, vehicle exhaust, soil dust, coal combustion, diesel exhaust, oil combustion and motorcycle exhaust. Metallurgical industry, automobile exhaust, and coal combustion were recognized to be the main pollution sources of PM(2.5) in the air of Shanghai City.
 ...
PMID:Characterization of PM(2.5) in the ambient air of Shanghai City by analyzing individual particles. 1678 73

An effective process for hazardous element extraction from municipal solid waste incinerator fly ash was developed. The key trait of the process was to extract most of the hazardous elements out of the ash but leave Ca and Si inside the residue. In the extraction process, the ash was firstly pre-washed with water, then subjected to subcritical water (SC water) treatment and nitrilotriacetic acid (NTA) extraction. SEM images indicated that SC water is strong enough to destroy the ash particles, thus greatly improving hazardous elements extraction efficiency in the subsequent NTA extraction process. The extraction percentages for Cr, As, Se, Cd and Pb under SC water+NTA treatment were around 2-6 times higher than those treated by NTA at room conditions. The preferable SC treatment temperature was 573 K and the treatment time was 3 h. The optimum NTA concentration, vibration time and liquid/solid ratio were 0.8 M, 5 h and 10:1 (ml/g), respectively. Furthermore, it was found that introduction of a suitable amount of sulfuric acid into the extraction solution could extract more than 90% of most of the hazardous elements out of the ash.
 ...
PMID:A novel process utilizing subcritical water and nitrilotriacetic acid to extract hazardous elements from MSW incinerator fly ash. 1681 48

In this work, MSWI (municipal solid waste incineration) fly ash is used as a blending in production of ceramic tile by taking advantage of its high contents of SiO(2), Al(2)O(3) and CaO. Besides, macro-performance and microstructure of the product as well as its leaching toxicity in practical application were studied by means of XRD, IR and SEM analysis, and leaching toxicity and sequential chemical extraction analysis of the product. It is found that when 20% fly ash is added, the product registers a high compressive strength of 18.6MPa/cm(2) and a low water absorption of 7.4% after being sintered at 960 degrees C. It is found that the glazed tile shows excellent resistance against leaching, in accordance with HVEP stand, of heavy metals with Cd<0.0002ppm, Pb<0.0113ppm and Zn<0.0749ppm, and Hg below the low detection limit. These results show that heavy metals are cemented among the solid lattice in the product and can hardly be extracted. Leaching toxicity of heavy metals in the product, especially Hg, Pb, Zn and Cd, is substantially reduced to less than one-tenth of that in fly ash. In addition, specifications of Hg, Pb, Zn and Cd are largely changed and only a small portion of these heavy metals exists in soluble phases. These results as a whole suggest that the use of MSWI fly ash in ceramic tile constitutes a potential means of adding value.
 ...
PMID:Study on use of MSWI fly ash in ceramic tile. 1688 89

Silica supported iron catalyst was prepared from rice husk ash (RHA) via the sol-gel technique using an aqueous solution of iron(III) salt in 3.0 M HNO3. The sample was dried at 110 degrees C and labeled as RHA-Fe. A sample of RHA-Fe was calcined at 700 degrees C for 5 h and labeled as RHA-Fe700. X-ray diffraction spectrogram showed that both RHA-Fe and RHA-Fe700 were amorphous. The SEM/EDX results showed that the metal was present as agglomerates and the Fe ions were not homogeneously distributed in RHA-Fe but RHA-Fe700 was shown to be homogeneous. The specific surface areas for RHA-Fe and RHA-Fe700 were determined by BET nitrogen adsorption studies and found to be 87.4 and 55.8 m(2) g(-1), respectively. Both catalysts showed high activity in the reaction between toluene and benzyl chloride. The mono-substituted benzyltoluene was the major product and both catalysts yielded more than 92% of the product. The GC showed that both the ortho- and para-substituted monoisomers were present in about equal quantities. The minor products consisting of 16 di-substituted isomers were also observed in the GC-MS spectra of both catalytic products. The catalyst was found to be reusable without loss of activity and with no leaching of the metal.
 ...
PMID:Iron incorporated heterogeneous catalyst from rice husk ash. 1699 77


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>