Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0432222 (SEM)
 47,337 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The chromosomal translocation t(4;11) marks infant acute lymphoblastic leukemia associated with a particularly dismal prognosis. The leukemogenic role of the corresponding fusion gene MLL-AF4 is not well understood. We show that transient inhibition of MLL-AF4 expression with small interfering RNAs impairs the proliferation and clonogenicity of the t(4; 11)-positive human leukemic cell lines SEM and RS4;11. Reduction of mixed-lineage leukemia (MLL)-ALL-1 fused gene from chromosome 4 (AF4) levels induces apoptosis associated with caspase-3 activation and diminished BCL-X(L) expression. Suppression of MLL-AF4 is paralleled by a decreased expression of the homeotic genes HOXA7, HOXA9, and MEIS1. MLL-AF4 depletion inhibits expression of the stem-cell marker CD133, indicating hematopoietic differentiation. Transfection of leukemic cells with MLL-AF4 siRNAs reduces leukemia-associated morbidity and mortality in SCID mice that received a xenotransplant, suggesting that MLL-AF4 depletion negatively affects leukemia-initiating cells. Our findings demonstrate that MLL-AF4 is important for leukemic clonogenicity and engraftment of this highly aggressive leukemia. Targeted inhibition of MLL-AF4 fusion gene expression may lead to an effective and highly specific treatment of this therapy-resistant leukemia.
 ...
PMID:Targeting MLL-AF4 with short interfering RNAs inhibits clonogenicity and engraftment of t(4;11)-positive human leukemic cells. 1604 33

Based on a survey of the literature on pretreatment of fused silica capillaries, 3 etching procedures and 11 silanization protocols based on the vinylic silane 3-((trimethoxysilyl)propyl) methacrylate (gamma-MAPS) were found to be most representative as a means of ensuring attachment of in situ prepared vinylic polymers. These techniques were applied to fused silica capillaries and the success in establishing the intended surface modification was assessed. X-ray photoelectron spectroscopy (XPS) was used to characterize the chemical state of the surface, providing information regarding presence of the reagent bound to the capillary. Wetting angles were measured and correlated with the XPS results. An adherence test was done by photopolymerization of a 2 mm long plug of 1,6-butanediol dimethacrylate in the prepared capillaries and evaluation of its ability to withstand applied hydraulic pressure. SEM was also performed in cases where the plug was released or other irregularities were observed. Finally, the roughness of the etched surface, considered to be of importance, was assessed by atomic force microscopy. Alkaline etching at elevated temperature provided a surface roughness promoting adhesion. The commonly used silanization protocols involving water in the silanization or washing steps gave inadequate surface treatment. The best silanization procedure was based on toluene as a solvent.
 ...
PMID:A study of surface modification and anchoring techniques used in the preparation of monolithic microcolumns in fused silica capillaries. 1648 5

Acrylate-based monolithic capillary columns were prepared from fused-silica capillaries using UV photopolymerization. The effect of the pretreatment of the capillary wall surface before polymerization was investigated and several procedures were compared. The columns were characterization by van Deemter curves and SEM imaging. The results indicated that a pre-silanization of the capillary wall in order to introduce methacrylate groups at the wall surface gave similar efficiencies but more homogeneous structures than when the silanization agent was introduced in the polymerization mixture. The conditioning of the capillary before silanization, especially the conditions of basic rinsing was also an important factor. The effect of the dose of UV light that was applied for the polymerization had also been investigated. The results demonstrated that the irradiation energy is a critical parameter. The minimum energy threshold required to obtain a suitable monolith was 3 J/cm(2) and the maximum was around 12 J/cm(2). A higher energy destroys the monolith. Within the convenient range of energy, the columns had the same efficiency and a good structure as seen by SEM imaging. Using the optimized procedure for the pretreatment and an adequate energy, the column-to-column repeatability was found good (n = 12). The repeatability was obtained for the plate height at two velocity values, the retention factor and the electroosmotic mobility with RSD values below 10.
 ...
PMID:In situ synthesis of monolithic stationary phases for electrochromatographic separations: study of polymerization conditions. 1654 72

In this study, self-designed bifunctional RGD-containing fusion protein (BFP) was grafted on the petri dish to evaluate its cytotoxicity and attachment efficiency on primary cultured keratinocytes and dermal fibroblasts. Two lengths of the GRGDS sequences were separately fused to the N-terminus and C-terminus of the Trichoderma koningii cellobiohydrolase I gene cellulose-binding domain, to serve as linking molecule between the cell and the substrate. The grafting procedure was no more labor-intensive and could be done just in aqueous condition itself. The epidermal keratinocytes and dermal fibroblasts, harvested and separated from human foreskin, were cultured in serum-free keratinocyte culture medium and DMEM, respectively. The BFP was dissolved in double-deionized water, and was prepared at different concentrations. The BFP solution was subsequently added into the petri dish for grafting. MTT assay, total DNA measurement, and lactate dehydrogenase analysis were used to evaluate the cell viability, cell proliferation, and cytotoxicity. The immunochemical stain and SEM examination were chosen to make sure that the cultured cells still kept in phenotype. The results showed that the self-designed BFP was successfully coated on the petri dish to improve the cells' adhesion. The whole coating procedure was just done in aqueous solution without any organic solvent being involved. This method was much simpler than the traditional one, and there was no possibility to damage the immobilized biomolecules. From the results of the study, BFP could enhance attachment of keratinocytes and dermal fibroblasts without losing normal cell morphology and keep keratinocytes on the desired differentiation pathway. We believe that coating BFP on petri dish not only enhanced the keratinocyte attachment but also promoted keratinocytes proliferation. We suggest that the self-designed BFP has a great potential to apply on surface modification for the tissue-engineering scaffolds in the future.
 ...
PMID:The effect of self-designed bifunctional RGD-containing fusion protein on the behavior of human keratinocytes and dermal fibroblasts. 1664 72

Up to now, the full potential of polymer-based nanoparticles is not yet exploited because of a lack of stability when conserved in aqueous medium. The present paper reports the water elimination from nanocapsules (NC) dispersions by means of the spray-drying technique with the aim to achieve dried solid forms of interest using colloidal silicon dioxide as drying auxiliary. The influence of formulation parameters on the suspension behaviour and on the powders characteristics was also evaluated. Our findings demonstrated that the mixing protocol, the concentrations of both NC and silica are crucial parameters that affect the feed behaviour and the spray-dried particles characteristics. Interactions occurring in the feed are directed by hydrogen bounds and were more sensitive to the silica concentration than that of NC as evidenced by rheological measurements. The NC are entrapped within solid dried matrixes following their interaction with silica particles in the feed. SEM analyses of the obtained powders showed spherical separated microparticles formed by the association of NC and silica when they are mixed at adequate concentrations in the feed before spray-drying. On the other hand, fused agglomerated particles presenting NC at their surface, characterised by irregular shapes and a strong adhesiveness were prepared when the silica concentration was not sufficient. The surface composition of the spray-dried powders was investigated using the ESCA technique and revealed the NC exclusion from the surface to obtain powders suitable for further handling.
 ...
PMID:Spray-dried microparticles containing polymeric nanocapsules: formulation aspects, liquid phase interactions and particles characteristics. 1687 67

Single-walled carbon nanotubes (SWNTs) have high surface area, high adsorption ability, and nanoscale interactions. In this study, capillary columns including SWNTs, ionic liquid (IL), and IL + SWNTs for GC were prepared. The separation results showed that SWNTs possessed a wide selectivity toward alkanes, alcohols, aromatic compounds, and ketones, and a SWNT capillary column was a very useful GC column for the separation of gas samples. Coating the IL stationary phase on the SWNT capillary column, the SWNTs were able to improve chromatographic characteristic of ionic liquid. Comparing the IL coated on three graphite carbon black capillary columns, which were prepared by dynamic coating, static coating, and chemical bonding the Carbopack C with on SWNTs capillary column, the capacity factors were much higher on the SWNT column. The SEM showed that SWNTs could be bonded to the inner surface of capillary tubing, and most of them were linked end-to-end to form a layer of network structure of skeletons resulting in a high surface area, which increased the interactions between stationary phase and analytes. This is the first single-wall carbon nanotubes bonded to the fused-silica capillary tubing. In the first approach, SWNTs assist ionic liquid with enhanced chromatographic characteristic in GC. This work indicates that SWNTs make it possible to extend the application range on the newly prepared chromatographic stationary phases for GC.
 ...
PMID:Single-walled carbon nanotubes used as stationary phase in GC. 1697 Mar 12

The fluorescent proteins ECFP and HcRed were shown to give an easily resolved FRET-signal when expressed as a fusion inside mammalian cells. HeLa-tat cells expressing ECFP, pHcRed, or the fusion protein pHcRed-ECFP were analyzed by flow cytometry after excitation of ECFP. Cells expressing HcRed-ECFP, or ECFP and HcRed, were mixed and FACS-sorted for FRET positive cells: HcRed-ECFP cells were greatly enriched (72 times). Next, cloned human antibodies were fused with ECFP and expressed anchored to the ER membrane. Their cognate antigens (HIV-1 gp120 or gp41) were fused to HcRed and co-expressed in the ER. An increase of 13.5+/-1.5% (mean+/-SEM) and 8.0+/-0.7% in ECFP fluorescence for the specific antibodies reacting with gp120 or gp41, respectively, was noted after photobleaching. A positive control (HcRed-ECFP) gave a 14.8+/-2.6% increase. Surprisingly, the unspecific antibody (anti-TT) showed 12.1+/-1.1% increase, possibly because overexpression in the limited ER compartment gave false FRET signals.
 ...
PMID:Fluorescent protein pair emit intracellular FRET signal suitable for FACS screening. 1712 16

Spider silks exhibit remarkable mechanical properties while dentin matrix protein 1 provides controlled nucleation and hydroxyapatite growth. In the present work, these two attributes were combined via genetic engineering to form a chimera, a clone encoding consensus repeats from the major protein in the spider dragline silk of Nephila clavipes fused to the carboxyl terminal domain of dentin matrix protein 1 (CDMP1). The objective was to exploit the self-assembly and material properties of silk proteins with controlled hydroxyapatite (HA) formation from CDMP1, for novel biomaterial composites. The purified recombinant protein retained native-silk like self-assembly properties and beta-sheet structure when formed into films and treated with methanol. When the chimeric protein in solution was incubated with CaCl(2,) the secondary structure shifted from random coil to alpha-helix and beta-sheet, due to the interactions between the CDMP1 domain and Ca(2+). The control protein without the CDMP1 domain did not undergo a similar transition. Films formed from the recombinant protein were mineralized using simulated body fluids and induced the formation of calcium-deficient carbonated HA, Ca(10)(PO(4))(6)(OH)(2) based on SEM, EDS, FTIR and TEM analysis. This mineral phase was not formed on the films formed from the control spider silk protein without the CDMP1 domain. Considering the osteoconductivity of HA and the novel material features of spider silks, these new hybrid systems offer potential as biomaterials for a number of potential applications.
 ...
PMID:The effect of genetically engineered spider silk-dentin matrix protein 1 chimeric protein on hydroxyapatite nucleation. 1728 41

The arrangement of the lingual muscles in the interior of the human tongue, particularly the course of the posterior muscle bundles of the styloglossus, was studied by gross anatomical examination and SEM, and its relationship with tongue functions was considered. The styloglossus divided into anterior and posterior fiber bundles. The bilateral anterior fiber bundles ran anteriorly, and fused at the median region of the lower surface of the tongue, forming a large arched structure. The posterior bundles divided into 10 or more smaller bundles and entered the interior of the tongue. These muscle bundles passed through the spaces between the inferior longitudinal and genioglossus and inserted in the lingual septum, forming a small arched structure. These posterior muscle bundles passed near the midpoint between the central third and dorsal third of the line between the mental spine and the dorsal surface of the tongue in the upper half of the root of the tongue, showing a multilayer structure. In many of the areas in which posterior muscle bundles were distributed, muscle bundles in the tongue were arranged along the posterior muscle bundles of the styloglossus, glossopharyngeal bundles of the superior pharyngeal constrictor muscle, and transverse muscle of the tongue from the deep layer to the dorsal surface of the tongue.
 ...
PMID:The three-dimensional architecture of the human styloglossus especially its posterior muscle bundles. 1753 33

Electron microscopy (EM) proved a very helpful means that solved a lot of information in different scientific aspects. EM is a very good tool in the hospitals and research centers. It was aimed to pile up available information on the biology in the descriptive morphology of nematodes and their immature stages by scanning (SEM) and transmission (TEM) electron microscopy. Watson (1965a, b) studied Euchromadora vulgaris and Ascaris sp. by using TEM respectively. Lee (1969) investigated the ultra-structure of Nippostrongylus brasiliensis by SEM & TEM, as well as some nematodes by TEM (Lee, 1972). The topography of the adult Baylisascaris procyonis caudal end was illustrated by Snyder (1989). Male tail relatively long, smoothly attenuated, with a small button-like or mucronate termination. Pre-anal papillae situated ventrally in 2 slightly divergent and somewhat irregularly spaced rows. Anterior and posterior to anus 2 slightly raised roughened patches consisting of several rows of small spines. Just anterior to anus along outer margin of pre-anal roughened patch, a large double medio-ventral papilla. Five pairs of post-anal papillae with first pair just posterior to anus doubled and 4 pairs more closely associated in a group near tail end. Second pair with doubled papillae; but, in a few specimens fused as if 2 single closely associated papillae. Three pair single. Fourth pair of caudal papillae phasmids and in centers of each a ringed pore-like opening. Male spicules with a highly sculptured surface with a pincher-like terminal end.
 ...
PMID:Review on electron microscopy in taxonomy and biology of parasitic Nemathelminthes. 1758 May 70


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>