Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0276640 (TEM)
 20,729 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

This paper reports in vivo protein adsorption onto polymers, including Biomer, PEO grafted Biomer (B-PEO-4K), heparin immobilized Biomer with PEO spacers (B-PEO-4K-HEP), and HEMA-Styrene block copolymer (H-S). Vascular grafts (6 mm ID, 7 cm in length) were fabricated with Biomer, coated on their luminal surfaces with test polymers, and implanted into the abdominal aorta of dogs. After 3 weeks-1 month, the grafts were retrieved and processed for TEM and SEM. TEM measured the thickness of adsorbed protein layers stained with a OsO4 solution, and the distribution pattern of adsorbed proteins (albumin, IgG and fibrinogen) using the immunoperoxidase technique. Retrieved grafts of Biomer and B-PEO-4K showed mural thrombi along the graft length, while thrombus formation on B-PEO-4K-HEP and H-S grafts was limited to the anastomotic sites. SEM pictures of B-PEO-4-HEP and H-S surfaces demonstrated clear morphology, with minimal platelet adhesion and activation, and microthrombi. Biomer and B-PEO-4K demonstrated a thick proteinaceous layer (1000-2000 A), whereas B-PEO-4K-HEP and H-S showed what can be described as a monolayer protein thickness (200-300 A). B-PEO-4K-HEP and H-S showed a monolayer-like adsorbed protein pattern, with high concentrations of albumin and IgG, and less fibrinogen, while Biomer and B-PEO-4K showed multilayered patterns with relatively high concentrations of fibrinogen, and less albumin. These results suggest that the surface properties of polymer may control protein adsorption pattern, and the composition of adsorbed protein is essential to in vivo long-term blood compatibility.
 ...
PMID:In vivo protein adsorption onto polymers: a transmission electron microscopic study. 268 16

Polyactive, a polyethylene oxide/polybutylene terephthalate (PEO/PBT) copolymer, has been reported to display bone-bonding behavior. Although a detailed description of the in vivo bone/Polyactive interface is available, the underlying bone-bonding mechanism is still largely unknown. In this in vitro study, a calvarial envelope method has been adopted to reproduce the in vivo bone-bonding phenomenon and subsequently to obtain information on the biological effect of varying PEO/PBT segment ratios. The following PEO/PBT ratios were examined: 70/30, 60/40, 55/45, 40/60, and 30/70. Light microscopy (LM) and scanning (SEM), transmission (TEM), and backscatter electron microscopy (BSE), as well as X-ray microanalysis (XRMA), were employed. Within the period of analysis (3 weeks), an intimate contact between mineralized deposition and the 70/30, 60/40, and, to a lesser extent, the 55/45 surface was observed. Calcified areas developed within the surface of these PEO/BPT proportions during the culture period. Needle-shaped crystals from the mineralized tissue compartment and from calcified areas within the materials surface were intermingled at the interface, providing a morphologic continuity. A cellular layer was interposed with the mineralization front and the noncalcified 40/60 and 30/70 substrates. Apparently, the percentage of PEO is important for calcification within the near surface of the polymer. This relation is such that the higher the PEO content in PEO/PBT ratios, the more rapid the calcification. The occurrence of material calcification is considered to be largely responsible for the subsequent interfacial interactions. The calvarial envelope culture method allows not only reproduction of the in vivo bone/Polyactive interface, but also a relatively rapid differentiation within the range of PEO/PBT ratios.(ABSTRACT TRUNCATED AT 250 WORDS)
 ...
PMID:Interfacial behavior of PEO/PBT copolymers (Polyactive) in a calvarial system: an in vitro study. 2690 52

Block copolymers consisting of poly(gamma-benzyl L-glutamate) (PBLG) as the hydrophobic block and poly(ethylene oxide) (PEO) as the hydrophilic block were synthesized and characterized. Core-shell type nanoparticles of the block copolymers (abbreviated as GE) were prepared by the diafiltration method. The particle size diameter obtained by dynamic light scattering of GE-1 (PBLG content: 60.5 mol%), GE-2 (PBLG content: 40.0 mol %), GE-3 (PBLG content: 124.4 mol %) copolymer was 309.9 +/- 160.9, 251.9 +/- 220.6 and 200.5 +/- 177.1nm, respectively. The shape of the nanoparticles by SEM or TEM was almost spherical. The critical micelle concentration of the block copolymers obtained by fluorescence spectroscopy was dependent on the chain length of hydrophobic PBLG. The micelle structure of the copolymers nanoparticle was very stable against sodium dodecyl sulfate. Clonazepam (CZ) was loaded onto the core part of the nanoparticle as the crystalline state. Release of CZ from the nanoparticles in vitro was dependent on the drug loading contents and PBLG chain length.
 ...
PMID:Clonazepam release from core-shell type nanoparticles in vitro. 968 14

Type I collagen-PEO fibers and non-woven fiber networks were produced by the electrospinning of a weak acid solution of purified collagen at ambient temperature and pressure. As determined by high-resolution SEM and TEM. fiber morphology was influenced by solution viscosity, conductivity, and flow rate. Uniform fibers with a diameter range of 100-150 nm were produced from a 2-wt% solution of collagen-PEO at a flow rate of 100 microl min(-1). Ultimate tensile strength and elastic modulus of the resulting non-woven fabrics was dependent upon the chosen weight ratio of the collagen-PEO blend. 1H NMR dipolar magnetization transfer analysis suggested that the superior mechanical properties, observed for collagen-PEO blends of weight ratio 1:1, were due to the maximization of intermolecular interactions between the PEO and collagen components. The process outlined herein provides a convenient, non-toxic, non-denaturing approach for the generation collagen-containing nanofibers and non-woven fabrics that have potential application in wound healing, tissue engineering, and as hemostatic agents.
 ...
PMID:Engineered collagen-PEO nanofibers and fabrics. 1178 24

We report the detailed characterization of micelles formed by two nonionic, amphiphilic ABC triblock copolymers. Poly(ethylene oxide)-b-poly(styrene)-b-1,2-poly(butadiene) (PEO-b-PS-b-PB) triblock copolymer "OSB" forms core-corona spherical micelles in aqueous solution, and the two hydrophobic blocks S and B are mixed homogeneously within the micelle core. PEO-b-PS-b-PB:C6F13I triblock copolymer "OSF" was prepared by selective fluorination of the B block in OSB with n-perfluorohexyl iodide. Fluorination of the B block induces internal segregation into an inner F core and an intermediate S shell. Furthermore, the strong incompatibility that results from fluorination drives a shape change into an oblate ellipsoid. These micellar morphologies are confirmed by combined light, neutron, and X-ray scattering measurements, as well as TEM imaging.
 ...
PMID:Micellar shape change and internal segregation induced by chemical modification of a tryptych block copolymer surfactant. 1292 35

The diblock copolymers based on PBLG and PEO (GE) were synthesized and characterized. Nanoparticles showed spherical shape from the observations of TEM and approved core-shell structure. Drug contents were increased with use of higher initial drug concentration and higher Mw of GE. Nifedipine (NFD) release rate was slower in longer PBLG chain length and higher NFD contents than short PBLG chain length and lower drug contents of NFD due to the hydrophobic interaction between PBLG domain and NFD.
 ...
PMID:Nifedipine encapsulated core-shell type nanoparticles based on poly(gamma-benzyl L-glutamate)/poly(ethylene glycol) diblock copolymers. 1551 50

Dynamic light scattering, potentiometric titration, transmission electron microscopy and atomic force microscopy have been used to investigate the micellar behaviour and metal-nanoparticle formation in poly(ethylene oxide)-block-poly(2-vinylpyridine), PEO-b-P2VP, poly(hexa(ethylene glycol) methacrylate)-block-poly(2-(diethylamino)ethyl methacrylate), PHEGMA-b-PDEAEMA, and PEO-b-PDEAEMA amphiphilic diblock copolymers in water. The hydrophobic block of these copolymers (P2VP or PDEAEMA) is pH-sensitive: at low pH it can be protonated and becomes partially or completely hydrophilic leading to molecular solubility whereas at higher pH micelles are formed. These micelles consist of a P2VP or PDEAEMA core and a PEO or PHEGMA corona, respectively, where the core forming amine units can incorporate metal compounds due to coordination. The metal compounds (e.g., H2PtCl6, K2PtCl6) can either be introduced in a micellar solution, where they are incorporated within the micelle core via coordination with functional groups, or can be added to a unimer solution at low pH, where they lead to a metal-induced micellization. In these micellar nanoreactors, metal nanoparticles nucleate and grow upon reduction with sizes in the range of a few nanometers as observed by TEM. The effect of the metal incorporation method on the characteristics of the micelles and of the synthesized nanoparticles is investigated.
 ...
PMID:Micellization in pH-sensitive amphiphilic block copolymers in aqueous media and the formation of metal nanoparticles. 1565 71

Four amphiphilic poly((1,2-butadiene)-block-ethylene oxide) (PB-PEO) diblock copolymers were shown to aggregate strongly and form micelles in an ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF(6)]). The universal micellar structures (spherical micelle, wormlike micelle, and bilayered vesicle) were all accessed by varying the length of the corona block while holding the core block constant. The nanostructures of the PB-PEO micelles formed in an ionic liquid were directly visualized by cryogenic transmission electron microscopy (cryo-TEM). Detailed micelle structural information was extracted from both cryo-TEM and dynamic light scattering measurements, with excellent agreement between the two techniques. Compared to aqueous solutions of the same copolymers, [BMIM][PF(6)] solutions exhibit some distinct features, such as temperature-independent micellar morphologies between 25 and 100 degrees C. As in aqueous solutions, significant nonergodicity effects were also observed. This work demonstrates the flexibility of amphiphilic block copolymers for controlling nanostructure in an ionic liquid, with potential applications in many arenas.
 ...
PMID:Self-assembly of block copolymer micelles in an ionic liquid. 1649 63

The aggregation behavior and the thermodynamics of binding between poly(ethylene oxide)-block-poly(2-(diethylamino)ethyl methacrylate) (PEO-b-PDEAEMA) block copolymers and plasmid DNA were examined. Binding between the polymer and DNA were confirmed by gel electrophoresis. The high affinity between the polymer and DNA was demonstrated through the ethidium bromide (EtBr) displacement assay, and the binding was found to be related to the stoichiometric balance between the amine group of the polymer and the DNA nucleotide molar ratio (N/P molar ratio). The light scattering and TEM results showed that, at low polymer concentration, the hydrodynamic radii (R(h)) of the polymer/DNA complexes was around 90 nm; however, at sufficiently high polymer concentration, the complexes condensed to around 35 nm induced by a structural rearrangement of the amphiphilic nature of the block copolymer. The isothermal titration calorimetric results showed that the binding between the polymer and DNA is driven by a large favorable enthalpy.
 ...
PMID:Aggregation behavior and thermodynamics of binding between poly(ethylene oxide)-block-poly(2-(diethylamino)ethyl methacrylate) and plasmid DNA. 1658 51

The pH-induced release of hydrophilic dyes from poly(2-vinylpyridine-b-ethylene oxide) (P2VP-PEO) block copolymer vesicles is investigated. The structure of the vesicles is characterized using small-angle neutron scattering (SANS) and cryo-electron microscopy (cryo-TEM). A decrease of the pH below 5 leads to protonation and dissolution of the poly-2-vinylpyridine blocks which induces rupture and dissolution of the vesicle membrane. Details of the rupture, dissolution, and release process are studied by fluorescence video microscopy, gel electrophoresis, and high-performance ultrafiltration.
 ...
PMID:pH-induced release from P2VP-PEO block copolymer vesicles. 1676 17


1 2 3 4 5 6 7 8 Next >>