Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0276640 (TEM)
 20,729 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The aqueous self-assembly of a novel lysine-derived surfactant with a gemini-like architecture, designated here as 12-Lys-12, has been experimentally investigated for the amphiphile alone in water and in a mixture with dodecyltrimethylammonium bromide (DTAB). The neat surfactant forms interesting micrometer-sized rigid tubules in the dilute region, resulting in very viscous solutions. For the catanionic mixture with DTAB, various single and multiphase regions were identified (up to a total surfactant concentration of 1.5 wt %) by means of combined polarizing light microscopy, cryo-TEM, and NMR. In the DTAB-rich side, for a mixing molar ratio in the range 2 < DTAB/12-Lys-12 < 4, a region of stable, unilamellar vesicles can be found. Furthermore, it was found that upon addition of 12-Lys-12 to pure DTAB solutions, the mixed micelles grow and beyond a given mixing ratio, vesicles assemble and coexist with small micelles. The transition is not continuous, since there is a narrow mixing range where phase separation occurs. Self-diffusion measurements and cryo-TEM imaging show that the average vesicle radius is on the order of 30-40 nm.
 ...
PMID:Self-assembly in a catanionic mixture with an aminoacid-derived surfactant: from mixed micelles to spontaneous vesicles. 1697 Apr 32

The EPR spectra of radical surfactant probes embedded in cetyltrimethylammonium bromide (CTAB) and trimethylbenzene (TMB) stable water emulsions (TMB/CTAB = 13) were analyzed to provide information on the kinetics of formation of micelle-templated silicoaluminas (MTSA) at 343 K, obtained by means of silica and alumina, solved in alkaline solutions, at different Si/Al ratios. Textural (surface area, pore volume, pore size, surfactant content) and structural characterization of both as-synthesized and calcined MTSA were performed by means of nitrogen sorption isotherms, TEM, and chemical analysis. This analysis showed that TMB worked as a swelling agent of the CTAB micelles, providing large-pore homogeneous and stable MTSA at TMB/CTAB = 13 for Si/Al from infinity to 10. A demixing of the emulsion occurs at Si/Al < 10: at Si/Al = 7, a double wide-and-narrow pore structure was formed; then, at Si/Al = 5, an amorphous material was obtained. At Si/Al > or = 10, the computer-aided analysis of the EPR spectra as a function of the synthesis time indicated the distribution of the probes in two different environments: "micellar" probes inserted in the surfactant aggregates, whose mobility decreases over the synthesis time, thus reporting on the progressive modification of the surfactant aggregates structure and the solid condensation, and "interacting" probes due to probe-surfactant heads electrostatically interacting with the charged surface sites induced by alumina incorporation in the silica network. This last fraction increases its relative amount over the synthesis time, informing about the condensation and structuration of the MTSA. Without alumina, the "interacting" component is absent in the EPR spectra because TMB preferentially interacts with the surfactant headgroups by cation-pi interactions, thus preventing the interactions of these headgroups with silanols. When alumina is added, the negatively charged silicoaluminate at the surface promotes the interaction of the ammonium headgroups with the surface, and some Na+ cations also interact with TMB by cation-pi interaction and contribute to decreasing the interaction of the headgroups with TMB. Therefore, increasing alumina contents promote electrostatic interactions between the positively charged surfactant heads and the negatively charged silicoaluminate groups. The strong interaction of the surfactants with the silicoaluminate surface allows the formation of a monolayerlike structure of surfactant, which is not observed in the absence of alumina. The synthesis is slowed by increasing alumina contents due to a destructuration effect of alumina in the MTSA formation.
 ...
PMID:Synthesis of large-pore micelle-templated silico-aluminas at different alumina contents. 1703 97

The formation of spontaneous mixed prevesicles and vesicles consisting of a cationic double-chain surfactant, didecyldimethylammonium bromide (di-C(10)DMAB), and a cationic single-chain alkyltrimethylammonium bromide with 10 and/or 14 carbon atoms (decyltrimethylammonium bromide, C(10)TAB, and/or tetradecyltrimethylammonium bromide, C(14)TAB) has been investigated by means of a series of (i) highly precise experimental techniques, such as conductometry, transmission electronic microscopies (TEM and cryo-TEM), laser Doppler electrophoresis (LDE), and steady-state fluorescence spectroscopy and (ii) theoretical models, such as the DLVO theory and two of its main further modifications, Inoues's and Sogami's models. Two new potentials, based on the combination of DLVO or Inoue potentials with that of Sogami, have been proposed and checked. This theoretical analysis has been carried out not only for the aggregates studied in this work but also for other di-C(m)DMAB + C(n)TAB (m = 10, 12 and n = 10, 12, 14) systems previously reported by us. In respect to the experimental study, special emphasis has been devoted to the prevesicle domain. We have confirmed the existence of two critical aggregation concentrations in the very diluted concentration domain, where the conductivity plot shows a zigzag pattern: the so-called mixed critical aggregate concentration, CAC* and the mixed critical vesicle concentration, CVC*. Contrarily, only CVC* is detected. The pre-CAC* nanoaggregates, with a variety of sizes and shapes, do not show a clear aggregation pattern, but even at such low concentrations a small number of nanoaggregates with a clear and ordered aggregation pattern has been visualized. In the postvesicle domain, the aggregates (vesicles) are unilamellar and spherical with a medium polidispersity and a net averaged surface density charge of around 14 x 10(-3) (pure vesicles) and 24 x 10(-3) C m(-2) (mixed vesicles). The hydrophobicities of the lipidic bilayer and the surface of the vesicles resemble those of media with dielectric constants of around 30 and 75, respectively. Finally, theoretical predictions confirm the stability of the pure and mixed vesicles studied in this work and in other works previously reported.
 ...
PMID:Cationic prevesicle and vesicle nanoaggregates: an experimental and theoretical study. 1710 8

para-Nitrophenol adsorbed on hexadecyltrimethylammonium bromide modified montmorillonite has been studied using a combination of X-ray diffraction TEM and infrared spectroscopy. Upon formation of the organoclay, the properties change from hydrophilic to hydrophobic. It is proposed that para-nitrophenol is adsorbed onto the water in the cation hydration sphere of the organoclay. As the cation is replaced by the surfactant molecules the para-nitrophenol replaces the surfactant molecules in the clay interlayer. Significant changes in the water vibrations occur in this process. Bands attributed to CH stretching and bending vibrations in general decrease as the concentration of the surfactant (CEC) increases up to 1.0 CEC. After this concentration the bands increase approaching a value the same as that of the surfactant. Strong changes occur in the HCH deformation modes of the methyl groups of the surfactant. These changes are attributed to the methyl groups locking into the siloxane surface of the montmorillonite. Such a concept is supported by changes in the SiO stretching bands of the montmorillonite siloxane surface. This study demonstrates that para-nitrophenol will penetrate into the untreated clay interlayer and replace the intercalated surfactant in surfactant modified clay, resulting in the change of the arrangement of the intercalated surfactant.
 ...
PMID:Adsorbed para-nitrophenol on HDTMAB organoclay--a TEM and infrared spectroscopic study. 1718 1

The concentration vs composition diagram of aggregate formation of the dodecyltrimethylammonium bromide (DTAB) and didodecyldimethylammonium bromide (DDAB) mixture in aqueous solution at rather dilute region was constructed by analyzing the surface tension, turbidity, and electrical conductivity data and inspected by cryo-TEM images and dynamic light scattering data. Although the aqueous solution of DTAB forms only micelles, the transition from monomer to small aggregates and then to vesicle was found at 0.1 < X2 <or=1, where X2 is the mole fraction of DDAB in the DTAB-DDAB mixture, while vesicle particles were formed directly from monomer solution at 0 < X2 < 0.1. Furthermore, the transition from vesicle to micelle was found at 0 < X2 < 0.4 at higher concentrations. An addition of DTAB to DDAB solution lowered considerably the DDAB concentration of the vesicle formation, which is attributable to asymmetric distribution of DTAB molecules between inner and outer monolayers of the vesicle bilayer. The shape and size of aggregates were obtained from surface tension, cryo-TEM, and light scattering data.
 ...
PMID:Spontaneous vesicle formation of single chain and double chain cationic surfactant mixtures. 1720 34

Synthetic vesicles were prepared by mixing anionic and cationic surfactants, aqueous sodium dodecylsulfate with didodecyltrimethylammonium or cetyltrimethylammonium bromide. The overall surfactant content and the (anionic/cationic) mole ratios allow one to obtain negatively charged vesicles. In the phase diagram, the vesicular region is located between a solution phase, a lamellar liquid crystalline dispersion, and a precipitate area. Characterization of the vesicles was performed by electrophoretic mobility, NMR, TEM, and DLS and we determined their uni-lamellar character, size, stability, and charge density. Negatively charged vesicular dispersions, made of sodium dodecylsulfate/didodecyltrimethylammonium bromide or sodium dodecylsulfate/cetyltrimethylammonium bromide, were mixed with lysozyme, to form lipoplexes. Depending on the protein/vesicle charge ratio, binding, surface saturation, and lipoplexes flocculation, or precipitation, occurs. The free protein in excess remains in solution, after binding saturation. The systems were investigated by thermodynamic (surface tension and solution calorimetry), DLS, CD, TEM, 1H NMR, transport properties, electrophoretic mobility, and dielectric relaxation. The latter two methods give information on the vesicle charge neutralization by adsorbed protein. Binding is concomitant to modifications in the double layer thickness of vesicles and in the surface charge density of the resulting lipoplexes. This is also confirmed by developing the electrophoretic mobility results in terms of a Langmuir-like adsorption isotherm. Charges in excess with respect to the amount required to neutralize the vesicle surface promote lipoplexes clustering and/or flocculation. Protein-vesicle interactions were observed by DLS, indicating changes in particle size (and in their distribution functions) upon addition of LYSO. According to CD, the bound protein retains its native conformation, at least in the SDS/CTAB vesicular system. In fact, changes in the alpha-helix and beta-sheet conformations are moderate, if any. Calorimetric methods indicate that the maximum heat effect for LYSO binding occurs at charge neutralization. They also indicate that enthalpic are by far the dominant contributions to the system stability. Accordingly, energy effects associated with charge neutralization and double-layer contributions are much higher than counterion exchange and dehydration terms.
 ...
PMID:Protein binding onto surfactant-based synthetic vesicles. 1724 34

Three new aliphatic thiol surfactants were synthesized by reacting alkyl bromide with hexamethyldisilathiane under a mild condition. This approach provides an easy access for the direct synthesis of various different length thiol surfactants which play a crucial role in tuning the properties of gold nanoparticles. Gold nanoparticles encapsulated with one of our synthetic thiols were prepared and well characterized by H NMR, UV-vis, FT-IR, and TEM. The hybrid nanoparticles are very stable in both organic solvents and the solid state.
 ...
PMID:A facile synthesis of aliphatic thiol surfactant with tunable length as a stabilizer of gold nanoparticles in organic solvents. 1729 18

The formation of a complex between an anionic spherical polyelectrolyte brush (SPB) and the cationic surfactant cetyltrimethylammonium bromide (CTAB) is investigated. The SPB consists of long chains of the strong polyelectrolyte poly(styrene sulfonate) (PSS), which are bound chemically to a solid poly(styrene) core of 56 nm in radius. The SPB are dispersed in water, and the ionic strength is adjusted by addition of NaBr. The resulting complexes are investigated in dilute solution by dynamic light scattering, by electrophoretic light scattering, and by cryogenic transmission electron microscopy (cryo-TEM). The formation of the complex between the SPB and the surfactant can be monitored by a strong shrinking of the surface layer when adding CTAB to dilute suspensions (0.01 wt %) and by a decrease of the effective charge of the complexes. Complex formation starts at CTAB concentrations lower than the critical micelle concentration of this surfactant. If the ratio r of the charges on the SPB to the charge of the added surfactant is exceeding unity, the particles start to flocculate. Cryo-TEM images of the complexes at r = 0.6 measured in salt-free solution show that the surface layer composed of the PSS chains and the adsorbed CTAB molecules is partially collapsed: A part of the chains form a dense surface layer while another part of the chains or aggregates thereof are still sticking out. This can be deduced from the cryo-TEM micrographs as well as from the hydrodynamic radius, which is still of appreciable magnitude. The 1:1 complex (r = 1.0) exhibits a fully collapsed layer formed by the PSS chains and CTAB. If the complex is formed in the presence of 0.05 M NaBr, r = 0.6 leads to globular structures directly attached to the surface of the core particles. All structures seen in the cryo-TEM images can be explained by a collapse transition of the surface layer brought about by the hydrophobic attraction between the polyelectrolyte chains that became partially hydrophobic through adsorption of CTAB.
 ...
PMID:Binding of oppositely charged surfactants to spherical polyelectrolyte brushes: a study by cryogenic transmission electron microscopy. 1731 35

In the present work, the assembly morphology changes during the solubilization process of the sonicated unilamellar vesicles from dimyristoyl phosphocholine (DMPC) by a cationic surfactant, n-dodecyl triethylammonium bromide (DTEAB) were well characterized with DSC, FF-TEM and DLS and fluorescence probes technique. Based on an analysis on the above results, a primary multi-stage model was brought forward to sketch the assembly morphology changes during the DMPC vesicle solubilization by DTEAB. In comparison with classical models, vesicles division, tubule-like structure formation and fission to vesicle were found in the middle stages of this model. Additionally, it is the first time that the transversally-cut profiles of tubule-like structures were observed during vesicle solubilization process.
 ...
PMID:Characterizing assembly morphology changes during solubilization process of dimyristoyl phosphocholine vesicles by n-dodecyl triethylammonium bromide. 1737 71

A novel class of organic-inorganic hybrids, the so-called cerasomes, which have a bilayer vesicular structure and a silicate surface, has been synthesized by combination of sol-gel reaction and self-assembly of organoalkoxysilanes with a molecular structure analogous to lipids. We have synthesized two cerasome-forming organoalkoxysilanes, N-[N-(3-triethoxysilyl)propylsuccinamoyl]dihexadecylamine (1) and N,N-dihexadecyl-N (alpha)-[6-[(3-triethoxysilyl)propyldimethylammonio]hexanoyl]glycinamide bromide (2), and investigated the synthetic conditions of the cerasomes and their structural characteristics. For the proamphiphilic 1, the cerasome was obtained under restricted pH conditions where acid-catalyzed hydrolysis of the triethoxysilyl moiety proceeded without disturbing the vesicle formation. In contrast, the amphiphilic 2, additionally having a hydrophilic quaternary ammonium group, formed stable dispersions of the cerasome in a wide pH range. The hydrolysis behavior of the triethoxysilyl groups was monitored by (1)H NMR spectroscopy. Morphology of the cerasomes having the liposomal vesicular structure was confirmed by TEM observations. Extent of the development of siloxane networks through condensation among the silanol groups on the cerasome surface was evaluated by using MALDI-TOF-MS spectrometry. Formation of oligomers of the cerasome-forming lipids in the vesicle was clearly confirmed. Due to the siloxane network formation, the cerasome showed remarkably high morphological stability compared with a reference liposome, as evaluated by surfactant dissolution measurements.
 ...
PMID:Preparation and characterization of a novel organic-inorganic nanohybrid "cerasome" formed with a liposomal membrane and silicate surface. 1740 15


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>