Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0276640 (TEM)
 20,729 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Small-angle neutron scattering (SANS), cryogenic transmission electron microscopy (cryo-TEM), and dynamic light scattering (DLS) were used to study the metal-dependent phase behavior of microbially produced surfactants-marinobactins B, D, and E (MB, MD, and ME). Marinobactins A-E are siderophores that facilitate Fe(III) acquisition by the source bacterium through the coordination of Fe(III) by the peptidic headgroup. All of the marinobactins have the same six amino acid headgroup but differ in the length and saturation of the monoalkyl fatty acid tail. Fe(III) coordinated to ME (Fe(III)-ME) was found to form micelles with a diameter of approximately 3.5 nm that underwent a supramolecular transformation to produce a monodisperse population of vesicles with an average diameter ranging from approximately 90 to 190 nm upon addition of Cd(II), Zn(II), or La(III). SANS profiles of the transition-metal-induced phase exhibit a Bragg peak at QB approximately 0.11-0.12 A-1 and were fit to a SANS model for multilamellar vesicles that have an interbilayer repeat distance of 2pi/QB approximately 5.6-5.0 nm. Cryo-TEM images of the Zn(II)-induced phase reveals the presence of approximately 100 nm diameter approximately spherical aggregates of uniform electron density. The temperature dependence of the Zn(II)-induced transformation was also investigated as a function of the length and degree of unsaturation of the Fe(III)-marinobactin fatty acid tail. The Cd(II)-, Zn(II)-, and La(III)-induced phase changes have features that are similar to those of the previously reported Fe(III)-induced micelle-to-vesicle transition, and this observation has opened questions regarding the role that Cd(II) and Zn(II) may play in bacterial iron uptake.
 ...
PMID:Metal-dependent self-assembly of a microbial surfactant. 1765 61

Iron oxide nanoparticles (IOnPs) as solid catalyst were prepared using a biotic method, i.e., biomineralization, and abiotic methods, i.e., thermal decomposition and electrochemical methods, for use as solid catalysts in the heterogeneous catalytic ozonation of para-Chlorobenzoic acid (pCBA). It was determined that characteristics of IOnPs, including particle size, morphology, surface area, electrokinetic mobility, basic group content, and chemical composition were significantly influenced by the preparation methods. TEM and FE-SEM analyses showed that the thermal decomposition method produced monodispersed and regularly spherical particles. The smallest iron oxide was also prepared by the thermal decomposition method, whereas the electrochemical method produced the largest iron oxide in terms of mean particle size. The specific surface area was found to be inversely proportional to the mean particle size. In catalytic ozonation at acidic pH levels, it was clearly observed that IOnPs enhanced the degradation of pCBA by the production of *OH radicals resulting from the catalytic decomposition of ozone. Additionally, functional groups and surface area were found to play an important role in the catalytic activity of IOnPs. To this extend, in a comparison of particle types, IOnPs prepared by the thermal decomposition method (IO(TD)) showed the greatest catalytic activity in terms of R(ct) value representing the ratio of hydroxyl radicals and ozone. This result may be due to the relatively higher surface area and basic group content of IO(TD) than other IOnPs.
 ...
PMID:Preparation of biotic and abiotic iron oxide nanoparticles (IOnPs) and their properties and applications in heterogeneous catalytic oxidation. 1769 23

We studied the kinetics of the formation of iron oxide nanocrystals obtained from the solution-phase thermal decomposition of iron-oleate complex via the "heating-up" process. To obtain detailed information on the thermal decomposition process and the formation of iron oxide nanocrystals in the solution, we performed a thermogravimetric-mass spectrometric analysis (TG-MS) and in-situ magnetic measurements using SQUID. The TG-MS results showed that iron-oleate complex was decomposed at around 320 degrees C. The in-situ SQUID data revealed that the thermal decomposition of iron-oleate complex generates intermediate species, which seem to act as monomers for the iron oxide nanocrystals. Extensive studies on the nucleation and growth process using size exclusion chromatography, the crystallization yield data, and TEM showed that the sudden increase in the number concentration of the nanocrystals (burst of nucleation) is followed by the rapid narrowing of the size distribution (size focusing). We constructed a theoretical model to describe the "heating-up" process and performed a numerical simulation. The simulation results matched well with the experimental data, and furthermore they are well fitted to the well-known LaMer model that is characterized by the burst of nucleation and the separation of nucleation and growth under continuous monomer supply condition. Through this theoretical work, we showed that the "heating-up" and "hot injection" processes could be understood within the same theoretical framework in which they share the characteristics of nucleation and growth stages.
 ...
PMID:Kinetics of monodisperse iron oxide nanocrystal formation by "heating-up" process. 1788 58

Janus magnetic nanoparticles (~20 nm) were prepared by grafting either polystyrene sodium sulfonate (PSSNa) or polydimethylamino ethylmethacrylate (PDMAEMA) to the exposed surfaces of negatively charged poly(acrylic acid) (PAA)-coated magnetite nanoparticles adsorbed onto positively charged silica beads. Individually dispersed Janus nanoparticles were obtained by repulsion from the beads on reversal of the silica surface charge when the solution pH was increased. Controlled aggregation of the Janus nanoparticles was observed at low pH values, with the formation of stable clusters of approximately 2-4 times the initial size of the particles. Cluster formation was reversed, and individually dispersed nanoparticles recovered, by restoring the pH to high values. At intermediate pH values, PSSNa Janus nanoparticles showed moderate clustering, while PDMAEMA Janus nanoparticles aggregated uncontrollably due to dipolar interactions. The size of the stable clusters could be controlled by increasing the molecular weight of the grafted polymer, or by decreasing the magnetic nanoparticle surface availability for grafting, both of which yielded larger cluster sizes. The addition of small amounts of PAA-coated magnetic nanoparticles to the Janus nanoparticle suspension resulted in a further increase in the final cluster size. Monte Carlo simulation results compared favorably with experimental observations and showed the formation of small, elongated clusters similar in structure to those observed in cryo-TEM images.
 ...
PMID:Preparation and controlled self-assembly of Janus magnetic nanoparticles. 1791 Apr 50

Maghemite (gamma-Fe2O3) nanoparticles of 15 +/- 3 nm diameter were prepared by nucleation of gelatin/iron oxide followed by growth of gamma-Fe2O3 films onto these nuclei. The gamma-Fe2O3 nanoparticles were coated with polydivinylbenzene (PDVB) by emulsion polymerization of divinylbenzene (DVB) in an aqueous continuous phase containing the gamma-Fe2O3 nanoparticles. The PDVB-coated gamma-Fe2O3 nanoparticles, dispersed in water, were separated from homo-PDVB nanoparticles using the high gradient magnetic field (HGMF) technique. The influence of DVB concentration on the amount of PDVB coating, on the size and size distribution of the coated gamma-Fe2O3 nanoparticles and on their magnetic properties, has been investigated. Air-stable carbon-coated iron (alpha-Fe/C) crystalline nanoparticles of 41 +/- 12 nm diameter have been prepared by annealing the PDVB-coated gamma-Fe2O3 nanoparticles at 1050 degrees C in an inert atmosphere. These nanoparticles exhibit high saturation magnetization value (83 emu g(-1)) and excellent resistance to oxidation. Characterization of the PDVB-coated gamma-Fe2O3 and of the alpha-Fe/C nanoparticles has been accomplished by TEM, HRTEM, DLS, FTIR, XRD, thermal analysis, zeta-potential, and magnetic measurements.
 ...
PMID:Synthesis and characterization of poly(divinylbenzene)-coated magnetic iron oxide nanoparticles as precursor for the formation of air-stable carbon-coated iron crystalline nanoparticles. 1792 99

In this study, temperature-responsive magnetite/polymer nanoparticles were developed from iron oxide nanoparticles and poly(ethyleneimine)-modified poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymer. The particles were characterized by TEM, XRD, DLS, VSM, FTIR, and TGA. A typical product has an approximately 20 nm magnetite core and an approximately 40 nm hydrodynamic diameter with a narrow size distribution and is superparamagnetic with large saturation magnetization (51.34 emu/g) at room temperature. The most attractive feature of the nanoparticles is their temperature-responsive volume-transition property. DLS results indicated that their average hydrodynamic diameter underwent a sharp decrease from 45 to 25 nm while evaluating the temperature from 20 to 35 degrees C. The temperature-dependent evolution of the C-O stretching band in the FTIR spectra of the aqueous nanoparticles solution revealed that thermo-induced self-assembly of the immobilized block copolymers occurred on the magnetite solid surfaces, which is accompanied by a conformational change from a fully extended state to a highly coiled state of the copolymer. Consequently, the copolymer shell could act as a temperature-controlled "gate" for the transit of guest substance. The uptake and release of both hydrophobic and hydrophilic model drugs were well controlled by switching the transient opening and closing of the polymer shell at different temperatures. A sustained release of about 3 days was achieved in simulated human body conditions. In primary mouse experiments, drug-entrapped magnetic nanoparticles showed good biocompatibility and effective therapy for spinal cord damage. Such intelligent magnetic nanoparticles are attractive candidates for widespread biomedical applications, particularly in controlled drug-targeting delivery.
 ...
PMID:Temperature-responsive magnetite/PEO-PPO-PEO block copolymer nanoparticles for controlled drug targeting delivery. 1798 60

We report a direct method for the synthesis of Iron(III) oxyhydroxide (FeOOH) nanowalls using an electrochemical technique at room temperature. The length of the nanowalls can be varied depending on the number of repetitive potentiostatic pulse cycles during the electrochemical process. The samples were characterized by ex-situ techniques such as SEM, XPS, FTIR, and TEM. Field emission performances of these nanowalls are also reported for the first time. The measured turn-on electric field is about 4.8 V/microm, with emission current density of 0.12 mA/cm2 at 7.3 V/microm. This technique provides a simple alternative method for large area synthesis of FeOOH nanowalls.
 ...
PMID:Characterization and field emission performance of electrochemically synthesized FeOOH nanowalls. 1801 64

Monochlorobenzene (MCB), dichlorobenzenes (DCBs), and 1,2,4-trichlorobenzene (124TCB) dechlorination experiments in water were carried out with freshly synthesized Pd/Fe particles. The pre- and postreacted Pd/Fe samples were characterized by applying various analytical techniques (XRD, SEM, TEM, and XPS). Chlorinated benzenes could be completely reduced by the Pd/Fe to benzene and the reaction followed the pseudo-first-order kinetics. The reaction rates followed the order TCB < DCBs < MCB, while among the DCBs the order was 1,4-dichlorobenzene >1,3-dichlorobenzene > or = 1,2-dichlorobenzene. Insignificant reactions were observed with the unpalladized iron, suggesting that Pd was the only reactive site in the Pd/Fe particles. The aged Pd/Fe particles exhibited significant decrease in its dechlorination reactivity. The loss of Pd/Fe reactivity could be due to Pd dislodgment from the aged Pd/Fe particles and Pd islets encapsulation by the iron oxides film developed over aging period. Reactivity of the aged Pd/Fe could be only partially restored after HCI treatment, while regeneration with the NaBH4 reduction method could not restore its activity, although zerovalent state of the iron was reinstated.
 ...
PMID:Catalytic reduction of chlorobenzenes with Pd/Fe nanoparticles: reactive sites, catalyst stability, particle aging, and regeneration. 1804 36

Asbestos crystallizes within rock formations undergoing intense deformation characterized by folding, faulting, shearing, and dilation. Some of these conditions have prevailed during formation of the taconite iron ore deposits in the eastern Mesabi Iron Range of Minnesota. This range includes the Peter Mitchell Taconite Mine at Babbitt, Minnesota. The mine pit is over 8 miles long, up to 1 mile wide. Fifty three samples were collected from 30 sites within areas of the pit where faulting, shearing and folding occur and where fibrous minerals might occur. Eight samples from seven collecting sites contain significant amounts of ferroactinolite amphibole that is partially to completely altered to fibrous ferroactinolite. Two samples from two other sites contain ferroactinolite degraded to ropy masses of fibers consisting mostly of ferrian sepiolite as defined by X-ray diffraction and TEM and SEM X-ray spectral analysis. Samples from five other sites contain unaltered amphiboles, however some of these samples also contain a very small number of fiber bundles composed of mixtures of grunerite, ferroactinolite, and ferrian sepiolite. It is proposed that the alteration of the amphiboles was caused by reaction with water-rich acidic fluids that moved through the mine faults and shear zones. The fibrous amphiboles and ferrian sepiolite collected at the Peter Mitchell Mine composes a tiny fraction of one percent of the total rock mass of this taconite deposit; an even a smaller amount of these mineral fragments enter the ambient air during mining and milling. These fibrous minerals thus do not present a significant health hazard to the miners nor to those non-occupationally exposed. No asbestos of any type was found in the mine pit.
 ...
PMID:The search for asbestos within the Peter Mitchell Taconite iron ore mine, near Babbitt, Minnesota. 1806 Jun 74

Eighteen coarse taconite tailings samples were collected in 2000-2001 from five western Mesabi Range taconite (iron ore) operations located in northern Minnesota, i.e., EVTAC, Hibbing Taconite (Hibtac), USX Minntac, Ispat Inland (Minorca), and National Steel Pellet Company (NSPC), to test their physical, geological, chemical, and mineralogical properties [Zanko, L.M., Niles, H.B., Oreskovich, J.A., 2003. Properties and aggregate potential of coarse taconite tailings from five Minnesota taconite operations, Minnesota Department of Transportation, Local Road Research Board, St. Paul, MN, Report No. 2004-06 (also as Natural Resources Research Institute technical report, NRRI/TR-2003/44)]. The goal was to assemble a body of technical data that could be used to better assess the potential of using a crushed taconite mining byproduct like coarse tailings for more widespread construction aggregate purposes, primarily in roads and highways. An important part of the mineralogical assessment included X-ray diffraction (XRD) analyses and microscopic (polarized light microscopy, scanning electron microscopy, and transmission electron microscopy, i.e., PLM, SEM, and TEM, respectively) evaluation of the size and shape (morphological) characteristics of potentially respirable microscopic mineral particles and fragments. Quantitative mineralogy, based on XRD analyses, showed that the dominant mineral in all samples was quartz (55-60%), followed by much smaller amounts of iron oxides, carbonates, and silicates. Specialized microscopic analyses and testing performed by the RJ Lee Group, Monroeville, PA, on both pulverized (-200 mesh, or 0.075mm) and as-is sample composites showed that no regulated asbestos minerals or amphibole minerals were detected in the western Mesabi Range samples. A small number (26) of non-asbestos and non-amphibole mineral cleavage fragments/mineral fibers were detected by SEM out of 1000 fields analyzed, but most were identified as minnesotaite and talc, silicate minerals common to the Biwabik Iron Formation. Amphibole minerals, absent in coarse tailings samples from the five western Mesabi Range taconite operations, were present in a single eastern Biwabik Iron Formation sample collected in 2003 for Lake County from the Cliffs Northshore operation in Silver Bay, MN. Importantly, the Superfund Method for the Determination of Releasable Asbestos in Soils and Bulk Materials [United States Environmental Protection Agency (USEPA), 1997. Superfund method for the determination of releasable asbestos in soils and bulk materials, EPA 540-R-97-028, U.S. Environmental Protection Agency, Washington], as modified by Berman and Kolk [Berman, D.W., Kolk, A.J., 2000. Modified elutriator method for the determination of asbestos in soils and bulk materials, Revision 1: Submitted to the U.S. Environmental Protection Agency, Region 8, May 23, 2000] failed to generate any protocol fibers, i.e., fibers longer than 5mum and thinner than 0.5mum, from either the western coarse tailings samples or the single eastern Biwabik Iron Formation sample. The combined findings suggest coarse tailings and other taconite mining byproducts should be treated with the same common sense safety and industrial hygiene approach practiced for all mineral-based materials that have the potential to generate respirable dust.
 ...
PMID:Mineralogical and microscopic evaluation of coarse taconite tailings from Minnesota taconite operations. 1816 56


<< Previous 1 2 3 4 5 6 7 8 9 10