Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0276640 (TEM)
 20,729 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Nanoparticles have been widely used for a variety of biomedical applications and there is a growing need for highly specific and efficient uptake of the nanoparticles into target cells. Poly(ethylene glycol) (PEG), folic acid (FA), and their conjugate PEG-FA were attached to magnetite nanoparticles to compare their effects on the improvement of intracellular uptake of the nanoparticles to human breast cancer cells, BT-20. AFM and TEM results indicated that the nanoparticles after surface modification were monodisperse, with coatings on individual nanoparticles. The cell culture experiments showed that the PEG-FA coated nanoparticles were internalized into BT-20 cancer cells and exhibited higher efficiency of intracellular uptake than only PEG- or FA-coated nanoparticles. The surface modification protocols can also be used to modify the surfaces of other nanoparticles for targeting intracellular delivery.
 ...
PMID:Surface modification of monodisperse magnetite nanoparticles for improved intracellular uptake to breast cancer cells. 1572 4

In this study, energy-filtered transmission electron microscopy is demonstrated to be a valuable tool for characterizing ultrafine coal fly ash particles, especially those particles encapsulated in or associated with carbon. By examining a series of elemental maps (K-edge maps of C and O, and L-edge maps of Si, Al, Ti and Fe) recorded using the three-window method, considerable numbers of titanium and iron species with sizes from several nanometres to submicrometre were shown to be present, typically as oxides dispersed in the carbonaceous matrix. Crystalline phases, such as rutile and iron-rich oxide spinel, were also identified from electron diffraction patterns and high-resolution TEM images. Information about these ultrafine coal fly ash particles regarding their size, morphology, elemental composition and distribution, and crystalline phases, which has not been available previously in conventional ash studies, should be useful in toxicological studies and related environmental fields.
 ...
PMID:Characterization of ultrafine coal fly ash particles by energy-filtered TEM. 1572 26

A widely applicable solvothermal route to nanocrystalline iron, indium, gallium, and zinc oxide based on the reaction between the corresponding metal acetylacetonate as metal oxide precursor and benzylamine as solvent and reactant is presented. Detailed XRD, TEM, and Raman studies prove that, with the exception of the iron oxide system, where a mixture of the two phases magnetite and maghemite is formed, only phase pure materials are obtained, gamma-Ga(2)O(3), zincite ZnO, and cubic In(2)O(3). The particle sizes lie in the range of 15-20 nm for the iron, 10-15 nm for the indium, 2.5-3.5 nm for gallium, and around 20 nm for zinc oxide. GC-MS analysis of the final reaction solution after removal of the nanoparticles showed that the composition is rather complex consisting of more than eight different organic compounds. Based on the fact that N-isopropylidenebenzylamine, 4-benzylamino-3-penten-2-one, and N-benzylacetamide were the main species found, we propose a detailed formation mechanism encompassing solvolysis of the acetylacetonate ligand, involving C-C bond cleavage, as well as ketimine and aldol-like condensation steps.
 ...
PMID:A general nonaqueous route to binary metal oxide nanocrystals involving a C-C bond cleavage. 1582

Core(Cr)/shell(gamma-Fe(2)O(3)) nanoparticles were synthesized by mixing Fe(CO)(5) and Cr(CO)(6) in the 9:1 ratio. These particles exhibit narrow size distribution with 13.5 nm as mean diameter and uniform spherical shape. The TEM image, which is in good agreement with the synchrotron powder XRD pattern, reveals the heterogeneous nature (core/shell structure). The analysis of the pattern reveals gamma-Fe(2)O(3) structure and a metal crystal structure. Mossbauer spectra, which support the superparamagnetic behavior determined by H-M measurement, do not show any traceable amount of Fe(0). This suggests that the metal component is Cr. EELS analysis and iron mapping suggest controlled stoichiometry and also confirm a core made of Cr and a shell made of gamma-Fe(2)O(3).
 ...
PMID:One-step synthesis of core(Cr)/shell(gamma-Fe(2)O(3)) nanoparticles. 1583 38

Nanoparticles of iron phosphate, iron arsenate, iron molybdate, and iron vanadate were synthesized within the 8 nm interior of ferritin. The synthesis involved reacting Fe(II) with ferritin in a buffered solution at pH 7.4 in the presence of phosphate, arsenate, vanadate, or molybdate. O2 was used as the oxidant to deposit the Fe(III) mineral inside ferritin. The rate of iron incorporation into ferritin was stimulated when oxo-anions were present. The simultaneous deposition of both iron and the oxo-anion was confirmed by elemental analysis and energy-dispersive X-ray analysis. The ferritin samples containing iron and one of the oxo-anions possessed different UV/vis spectra depending on the anion used during mineral formation. TEM analysis showed mineral cores with approximately 8 nm mineral particles consistent with the formation of mineral phases inside ferritin.
 ...
PMID:Nanophase iron phosphate, iron arsenate, iron vanadate, and iron molybdate minerals synthesized within the protein cage of ferritin. 1584 28

Cubic FeS2 crystallites have been synthesized via a single-source approach using iron diethyldithiocarbamate as precursor under hydrothermal conditions. The sample is characterized by XRD, IR, TEM, and FESEM. The optical properties of the as-prepared FeS2 reveal that there exists a red shift compared with that of bulk materials. Meanwhile, the electrochemical properties of FeS2 demonstrate that it delivers a large discharge capacity, which might find possible application as an electrode material in lithium cells. It is also found that the reaction temperature is of importance to the formation of cubic FeS2 crystallites.
 ...
PMID:Single-source approach to cubic FeS2 crystallites and their optical and electrochemical properties. 1585 73

This study examined the potential impact of microbially mediated reduction of Fe in the Fe(III)-(hydr)oxide mineral ferrihydrite on the mobility of As in natural waters. In microcosm experiments, the obligately anaerobic bacterium Geobacter metallireducens reduced on average 10% of the Fe(III) in ferrihydrite with varying sorbed As(V) surface coverages, which resulted in deflocculation of initially micron-sized As-bearing ferrihydrite aggregates to nanometersized colloids. No reduction of As(V) to As(III) was observed in microcosm samples. Measurement of Fe and As within operationally defined particulate, colloidal, and dissolved fractions of microcosm slurry samples revealed that little Fe or As was released from ferrihydrite as dissolved species. Microbially induced deflocculation of ferrihydrite in the presence of G. metallireducens was correlated with more negative zeta potential of ferrihydrite nanoparticles suggesting that G. metallireducens mediated As mobilization through alteration of ferrihydrite surface charge. TEM analysis and solution chemistry conditions suggested formation of a magnetite surface layer through topotactic recrystallization of ferrihydrite (2LFH) driven by sorbed Fe(II). The formation of nanometer-sized As-bearing colloids through microbially mediated reduction of Fe-(hydr)oxides has the potential to increase human As exposure by enhancing As mobility in natural waters and hindering As removal during subsequent drinking water treatment.
 ...
PMID:Arsenic mobilization through microbially mediated deflocculation of ferrihydrite. 1592 53

Dechlorination of TCE and PCBs using bimetallic nanoparticles has received increasing interest in recent years. However, due to the extremely high reactivity, nanoparticles prepared using current methods tend to either react with surrounding media or agglomerate, resulting in the formation of much larger flocs and significant loss in reactivity. To overcome these drawbacks, we developed a simple and green approach for synthesizing palladized iron (Fe-Pd) nanoparticles. We modified the conventional methods by applying a water-soluble starch as a stabilizer. The starched nanoparticles displayed much less agglomeration but greater dechlorination power than those prepared without a stabilizer. TEM analyses indicated that the starched nanoparticles were present as discrete particles as opposed to dendritic flocs for nonstarched particles. The mean particle size was estimated to be 14.1 nm with a standard deviation of 11.7 nm, which translated to a surface area of approximately 55 m2 g(-1). While starched nanoparticles remained suspended in water for days, nonstarched particles agglomerated and precipitated within minutes. The starched nanoparticles exhibited markedly greater reactivity when used for dechlorination of TCE or PCBs in water. At a dose of 0.1 g L(-1), the starched particles were able to destroy 98% of TCE (C0 = 25 mg L(-1)) within 1 h. While trace amounts (<25 microg L(-1)) of 1,1-DCE were detected in the initial stage (<20 min) of degradation, no other intermediate byproducts such as vinyl chloride, cis-, or trans-dichloroethene were detected. The starched nanoparticles at approximately 1 g L(-1) were able to transform over 80% of PCBs (C0 = 2.5 mg L(-1)) in less than 100 h, as compared to only 24% with nonstarched Fe-Pd nanoparticles. The application of an innocuous stabilizer may substantially enhance the performances of palladized iron nanoparticles for environmental applications.
 ...
PMID:Preparation and characterization of a new class of starch-stabilized bimetallic nanoparticles for degradation of chlorinated hydrocarbons in water. 1592 84

The clustering and stability of magnetic nanoparticles coated with random copolymers of acrylic acid, styrenesulfonic acid, and vinylsulfonic acid has been studied. Clusters larger than 50 nm are formed when the coatings are made using too low or too high molecular weight polymers or using insufficient amounts of polymer. Low-molecular-weight polymers result in thin coatings that do not sufficiently screen van der Waals attractive forces, while high-molecular-weight polymers bridge between particles, and insufficient polymer results in bare patches on the magnetite surface. The stability of the resulting clusters is poor, but when an insufficient polymer is used as primary coating, and a secondary polymer is added to coat remaining bare magnetite, the clusters are stable in high salt concentrations (>5 M NaCl), while retaining the necessary cluster size for efficient magnetic recovery. The magnetite cores were characterized by TEM and vibrating sample magnetometry, while the clusters were characterized by dynamic light scattering. The clustering and stability are interpreted in terms of the particle-particle interaction forces, and the optimal polymer size can be predicted well on the basis of these forces and the solution structure and hydrophobicity of the polymer. The size of aggregates formed by limited polymer can be predicted with a diffusion-limited colloidal aggregation model modified with a sticking probability based on fractional coating of the magnetite cores.
 ...
PMID:Controlled clustering and enhanced stability of polymer-coated magnetic nanoparticles. 1595 54

In the current study, amine surface modified iron-oxide nanoparticles of 6 nm diameter without polymer coating were fabricated in an aqueous solution by organic acid modification as an adherent following chemical coprecipitation. Structure and the superparamagnetic property of magnetite nanoparticles were characterized by selected area electron diffraction (SAED) and superconducting quantum interference measurement device (SQUID). X-ray photoelectron spectrometer (XPS) and zeta potential measurements revealed cationic surface mostly decorated with terminal -NH(3)(+). This feature enables them to function as a magnetic carrier for nucleotides via electrostatic interaction. In addition, Fe(3)O(4)/trypsin conjugates with well-preserved functional activity was demonstrated. The nanoparticles displayed excellent in vitro biocompatibility. The NMR and the in vitro MRI measurements showed significantly reduced water proton relaxation times of both T(1) and T(2). Significantly reduced T(2) and T(2)*-weighted signal intensity were observed in a 1.5 T clinical MR imager. In vivo imaging contrast effect showed a fast and prolonged inverse contrast effect in the liver that lasted for more than 1 week. In addition, it was found that the spherical Fe(3)O(4) assembled as rod-like configuration through an aging process in aqueous solution at room temperature. Interestingly, TEM observation of the liver tissue revealed the rod-like shape but not the spherical-type nanoparticles being taken up by the Kupffer cells 120 h after tail vein infusion. Combining these results, we have demonstrated the potential applications of the newly synthesized magnetite nanoparticles in a broad spectrum of biomedical applications.
 ...
PMID:Aqueous dispersions of magnetite nanoparticles with NH3+ surfaces for magnetic manipulations of biomolecules and MRI contrast agents. 1596 22


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>