Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0276640 (TEM)
 20,729 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

A sol-gel chemistry approach was used to fabricate nanoparticles of TiO(2) in its anatase form. The particle size is shown to be sensitive to the use of HClO(4) or HNO(3) as acid catalyst. The gold-capped TiO(2) nanocomposites were processed by the reduction of gold on the surface of the TiO(2) nanoparticles via a chemical reduction or a photoreduction method. Different percentages of vanadium-doped TiO(2) nanoparticles, which extended the TiO(2) absorption wavelength from the ultraviolet to the visible region, were successfully prepared. The synthesized nanocomposites have a size of about 12-18 nm and an anatase phase as characterized by XRD, TEM, AFM, and UV-vis spectroscopy. The TiO(2) nanocomposite coatings have been applied on glass slide substrates. The antibacterial activity of TiO(2) nanocomposites was investigated qualitatively and quantitatively. Two types of bacteria, Escherichia coli (DH 5alpha) and Bacillus megaterium (QM B1551), were used during the experiments. Good inhibition results were observed and demonstrated visually. The quantitative examination of bacterial activity for E. coli was estimated by the survival ratio as calculated from the number of viable cells, which form colonies on the nutrient agar plates. The antimicrobial efficiency and inhibition mechanisms are illustrated and discussed.
 ...
PMID:Anatase TiO2 nanocomposites for antimicrobial coatings. 1685 57

Previous studies have shown that when using carbon nanotubes (CNTs) as tapping-mode AFM probes, their tilt angle with respect to vertical (denoted phi) must be close to 0 degrees to obtain high-quality images and that very poor images are obtained for phi > 30 degrees . Here we present a quantitative theoretical investigation of the effect of phi on tapping-mode AFM imaging for single-wall and multiwall nanotube (SWNT and MWNT, respectively) probes of diameters 3.4-5.5 nm and aspect ratio 7.5, which have been found ideal for imaging via TEM. Using molecular and classical dynamics, we investigate the effect of phi on CNT probe stiffness (quantified through the maximum gradient of the tip-sample interaction force) and show that it decreases linearly with increasing phi, becoming negligible at around phi approximately 40 degrees , thus confirming the conclusions of previous studies. We find that MWNT probe stiffness is proportional to the number of walls, but that the difference in stiffness between SWNTs and MWNTs also decreases linearly with increasing phi and becomes negligible at around phi approximately 40 degrees . The simulated cross-sectional scans of a sample SWNT using two different values of phi show that the image can be distorted and shifted laterally when phi is large, in some cases giving measured heights appreciably greater than the sample dimensions. We show analytically that the tip-sample forces that occur during imaging can be significantly lower when CNT probes are used instead of conventional probes, even in the absence of buckling, and that they can be further reduced by increasing phi. On the basis of this result, we propose the design of free-standing kinked probes for the characterization of sensitive samples, whereby the probe approaches the sample at a vertical orientation and possesses a tilted section that regulates the tip-sample interaction forces.
 ...
PMID:Influence of the carbon nanotube probe tilt angle on the effective probe stiffness and image quality in tapping-mode atomic force microscopy. 1685 19

Metal nanoparticles (Pt, Au, or Cu) together with multiwalled and single-walled carbon nanotubes (MWCNT and SWCNT) solubilized in Nafion have been used to form nanocomposites for electrochemical detection of trinitrotoluene (TNT) and several other nitroaromatics. Electrochemical and surface characterization by cyclic voltammetry, AFM, TEM, SEM, and Raman spectroscopy confirmed the presence of metal nanoparticles on CNTs. Among various combinations tested, the most synergistic signal effect was observed for the nanocomposite modified glassy carbon electrode (GC) containing Cu nanoparticles and SWCNT solubilized in Nafion. This combination provided the best sensitivity for detecting TNT and other nitroaromatic compounds. Adsorptive stripping voltammetry for TNT resulted in a detection limit of 1 ppb, with linearity up to 3 orders of magnitude. Selectivity toward the number and position of the nitro groups in different nitroaromatics was very reproducible and distinct. Reproducibility of the TNT signal was within 7% (n = 8) from one electrode preparation to another, and the response signal was stable (+/-3.8% at 95% confidence interval) for 40 repeated analyses with 10 min of preconditioning. The Cu-SWCNT-modified GC electrode was demonstrated for analysis of TNT in tap water, river water, and contaminated soil.
 ...
PMID:Metallic nanoparticle-carbon nanotube composites for electrochemical determination of explosive nitroaromatic compounds. 1687 89

Thermally sensitive micelles self-assembled from poly(N-isopropylacrylamide-co- N,N-dimethylacrylamide)-b-poly(d,l-lactide-co-glycolide)[P(NIPAAm-co-DMAAm)-b-PLGA] are fabricated and used as a carrier for the controlled delivery of paclitaxel. Paclitaxel is efficiently loaded into the micelles by a membrane dialysis method. The lower critical solution temperature (LCST) of the micelles is 39.0 degrees C in PBS. Encapsulation efficiency and loading level of paclitaxel are affected by the initial loading level of paclitaxel, fabrication temperature and polymer composition. The blank and paclitaxel-loaded micelles are characterized by particle size analysis (DLS), morphology (TEM and AFM) and paclitaxel distribution (NMR, DSC and WAXRD). The micelles are spherical in shape, having an average size less than 130 nm. Paclitaxel is molecularly distributed within the core of micelles. Sustained release of paclitaxel is achieved, which is much faster at a temperature above the LCST than at the normal body temperature (37 degrees C). Cytotoxicity of free paclitaxel and paclitaxel-loaded micelles against a human breast carcinoma cell line (MDA-MB-435S) is studied at different temperatures. The cytotoxicity of the paclitaxol-loaded micelles is greater as compared to free paclitaxel. Enhanced cytotoxicity is achieved by the paclitaxol-loaded micelles when the environmental temperature increases slightly above the LCST. Paclitaxel-loaded P(NIPAAm-co-DMAAm)-b-PLGA micelles may provide a good formulation for cancer therapy.
 ...
PMID:Thermally sensitive micelles self-assembled from poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide)-b-poly(D,L-lactide-co-glycolide) for controlled delivery of paclitaxel. 1688 Sep 79

The layer-by-layer assembly of silver nanoclusters with 3,3'-dithiodipropionic acid (DTDPA) as spacers was prepared through self-assembly on a gold foil and has been characterized by cyclic voltammetric and AFM techniques. The DTDPA molecules acting as spacers between the layers of silver serve as molecular interconnects for the four layers prepared in this work. The organization of layers was found to decrease with an increase in the number of layers. The layer-by-layer assembly of silver clusters motivated us to prepare silver nanowires stabilized by the bifunctional molecules DTDPA through template synthesis using cellulose nitrate membranes. The nanostructures formed by this method were characterized by SEM, TEM, AFM, FTIR, CV, and photoluminescence studies. It is observed that the DTDPA molecules, instead of forming molecular interconnects, protect the structures by self-assembling themselves along the edges of the nanostructures. The concept of self-assembly protecting the nanostructures is demonstrated in this work.
 ...
PMID:Templated synthesis of silver nanowires based on the layer-by-layer assembly of silver with dithiodipropionic acid molecules as spacers. 1694 89

SPION with appropriate surface chemistry have been widely used experimentally for numerous in vivo applications. In this study, SPION stabilized by alginate (SPION-alginate) were prepared by a modified coprecipitation method. The structure, size, morphology, magnetic property and relaxivity of the SPION-alginate were characterized systematically by means of XRD, TEM, ESEM, AFM, DLS, SQUID magnetometer and MRI, respectively, and the interaction between alginate and iron oxide (Fe(3)O(4)) was characterized by FT-IR and AFM. The results revealed that typical iron oxide nanoparticles were Fe(3)O(4) with a core diameter of 5-10 nm and SPION-alginate had a hydrodynamic diameter of 193.8-483.2 nm. From the magnetization curve, the Ms of a suspension of SPION-alginate was 40 emu/g, corresponding to 73% of that of solid SPION-alginate. This high Ms may be due to the binding of Fe(3)O(4) nanoparticles to alginate macromolecule strands as visually confirmed by AFM. SPION-alginate of several hundred nanometers was stable in size for 12 months at 4 degrees C. Moreover, T1 relaxivity and T2 relaxivity of SPION-alginate in saline (1.5 T, 20 degrees C) were 7.86+/-0.20 s(-1) mM(-1) and 281.2+/-26.4 s(-1) mM(-1), respectively.
 ...
PMID:Preparation and characterization of superparamagnetic iron oxide nanoparticles stabilized by alginate. 1707 54

The pore structure of chromatographic adsorbents directly influences macromolecular partitioning and transport in chromatography. Quantitative structural characterization of chromatographic media has generally been performed in terms of the mean pore size or, at best, the pore size distribution (PSD), but more detailed information on, e.g., connectivity has been lacking. We have applied electron tomography, a 3D TEM technique that views a sample from multiple perspectives and allows reconstruction of the volumetric structure, to capture the internal details of microporous chromatographic media with nanometer-scale resolution. Visualization of reconstructions of three adsorbents, Toyopearl SP-650 C, SP-550 C, and CM Sepharose FF, provides thorough and direct information on the geometry and the interconnectivity of the pore network. The structures are qualitatively consistent with in situ AFM images, and quantitative data for the porosities and PSDs from the analysis of tomographic data agree reasonably well with inverse size-exclusion chromatography results. For a more straightforward representation of the networking and size features of the disordered pore space, a 3D thinning algorithm was used to derive pore skeletons and consequently quantitative data on distributions of local path lengths, widths, tortuosities, and connectivities. Such enriched structural information can be instrumental in more discriminate structural evaluation and construction of engineered pore models for the study of solute intraparticle transport.
 ...
PMID:Three-dimensional pore structure of chromatographic adsorbents from electron tomography. 1715 96

Frechet-type benzyl ether dendrons of second and third generations with a carboxyl group (G2, G3) at the apex site could attach to poly(4-vinylpyridine) (PVP), forming hydrogen-bonded dendronized polymers (HB denpols) in their common solvent, chloroform. The HB denpols show unique self-assembly behavior, forming vesicles in the common solvent under ultrasonic treatment. The structure and morphology of the vesicles were characterized by dynamic light scattering (DLS), static light scattering (SLS), SEM, TEM, and AFM. The size of the vesicles decreases and the thickness of the vascular membrane increases as the molar ratio of Gx/PVP increases. The hydrogen bonding, pi-pi aromatic stacking of the dendrons, and the considerable difference in architecture between the dendron Gx and PVP are the main factors facilitating the assembly of the HB denpols in the common solvent.
 ...
PMID:Hydrogen-bonded dendronized polymers and their self-assembly in solution. 1720 94

Morphologies of surface micelles of the diblock copolymer polystyrene-block-poly(4-vinylpyridine) (PS-P4VP) at different concentrations were investigated using TEM. Highly-ordered spherical micelles were observed. The morphology was found to depend strongly on the solution concentration. A transformation from spherical to cylindrical micelles and the formation of multilayers of micelles were observed when the concentration was increased. The evolution of the morphology of the diblock copolymer film cast on Si substrates in the presence of different solvents was also investigated using AFM. We find that there is a discrepancy in the structure obtained using TEM and AFM because of the presence of a selective solvent in the TEM sample. The transformation from cylindrical to spherical micelles was observed for the film prepared under a nitrogen atmosphere. Hexagonally ordered holes were observed in the film prepared in air. The presence of moisture in the air may play an important role in the formation of this structure.
 ...
PMID:Morphology evolution in a diblock copolymer film. 1725 50

We report a general and versatile method for controlled synthesis of anisotropic gold nanostructures through the reduction of HAuCl4 by aniline in aqueous solution, without the need for an additional stabilizer or capping agent. In this approach, the reduction kinetics of AuCl-4 can be altered by simply adjusting the initial pH and temperature, inducing the formation of a wide variety of anisotropic nanostructures such as dispersed or multilayered plates, wires with networked or paramecium-like structures, and ginger-shaped particles. AFM, TEM, XRD, EDX, FTIR, and UV-vis-NIR measurements were used to characterize the resulting gold nanostructures. Investigation reveals that in situ formed polyaniline serves effectively as a capping agent to direct the shape of gold nanostructures during the slow growth process. These as-synthesized gold nanostructures exhibit strongly shape-dependent optical properties. This facile approach may be extended to the synthesis of some other anisotropic metal nanostructures such as platinum or palladium.
 ...
PMID:One-step controlled synthesis of anisotropic gold nanostructures with aniline as the reductant in aqueous solution. 1730 Jul 97


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>