Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0268596 (EMA)
 2,520 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Jejunal histology and the presence of serum IgA antibodies (JAB) binding to human jejunum in vitro were studied in 139 children with severe malabsorptive symptoms. Among 33 children with confirmed coeliac disease (ESPGAN criteria), 13 (93%) of 14 sampled before starting on a gluten-free diet had JAB, none of 21 sampled had JAB while on a gluten-free diet of long duration, and 90% of 30 sampled during gluten challenge had JAB. 53 children had severe jejunal villous atrophy (probable coeliac disease): 71% of those younger than 2 years and 94% of those aged 2-18 years had JAB during gluten intake. JAB could not be detected in 53 disease control patients (normal jejunal histology) and in 3 coeliac disease patients with selective IgA deficiency. Simultaneous determination of antigliadin (AGA) and antiendomysium (EMA) levels, and gliadin and tissue absorption studies, showed that JAB and AGA are different, whereas JAB and EMA are probably identical. IgA JAB could be the target-organ-related autoantibodies in coeliac disease.
 ...
PMID:Binding to human jejunum of serum IgA antibody from children with coeliac disease. 197 62

A case of intracranial fibrous xanthoma (xanthofibroma) is reported. Intracranial fibrous xanthoma in infancy under the age of 1 year is extremely rare. This patient was a 8-month-old boy with a history of convulsive seizure. He had a previously known chest wall tumor which was diagnosed as fibrous xanthoma of the skin. Plain CT scan revealed a well defined high density area in the left temporal lobe. The area was well enhanced with contrast media. At operation, it was found that the tumor did not attach to dura mater and was almost well demarcated. Total removal of the tumor was performed. The patient has been doing well for these 6 months following craniotomy, with no sings of recurrence and no neurological deficits. Histologically, the tumor was composed of fibroblastic cells and foamy phagocytic cells in storiform pattern. Some multinucleated giant cells were found. Immunohistochemistry technique revealed that the tumor cells were negative for GFAP, positive for Vimentin, positive for S-100 protein and negative for EMA. Our studies support the diagnosis of intracranial fibrous xanthoma coexistent with the same tumor found in the subcutaneous space of the chest wall of a boy under 1 year of age. We regard it as a rare incidence. Differential diagnosis and the characteristics of fibrous xanthoma were discussed.
 ...
PMID:[Intracranial fibrous xanthoma (xanthofibroma) in an infant: a case report]. 203 18

Ten dental casting alloys were tested for alloy-element release into cell-culture medium, and this release was related to alloy composition, alloy microstructure, and alloy cytotoxicity (previously determined). Cell-culture medium was analyzed for alloy elements by flame atomic absorption. Concentrations of elements in the medium were normalized by dividing them by their atomic abundance in the alloy, giving element medium-alloy ratios (EMA ratios). Results showed that Au, In, and Pd generally did not dissolve into the medium, but that Ag, Cd, Cu, Ga, Ni, and Zn frequently dissolved. Comparison of EMA ratios for Ag, Cu, and Zn showed that each element retained a behavioral identity in diverse metallurgical environments, but that these environments influenced the release behavior to some degree. Some EMA ratios in multiphase alloys were greater than those in solid solutions, and EMA ratios showed great diversity within all the alloys. Nominal composition seemed to be of little value in the prediction of metal release unless the composition supported multiple-phase formation. In addition, release of alloy elements did not, in itself, completely predict alloy cytotoxicity measured previously. However, cytotoxicity was associated with metal release in each case. The commercial alloys used in this study exhibited more complex and less predictable release behavior than did the simpler ternary alloy systems used by previous investigators. It is believed that the use of commercial preparations is necessary for their in vivo behavior to be modeled.
 ...
PMID:The release of elements of dental casting alloys into cell-culture medium. 204 70

This study was devoted to a peculiar population of argyrophilic cells present among various stratified squamous epithelia. The purpose of the study was to determine the distribution and the nature of these argyrophilic cells, and to reappraise their degree of analogy with the Merkel cells of epidermis. Examples of squamous epithelia from skin, exocervix, anal canal and dermoid cyst of ovary were investigated using histochemical, immunohistochemical and ultrastructural techniques. Melanin-containing cells as well as peculiar argyrophilic cells were revealed in each series of specimens. These peculiar argyrophilic cells expressed EMA, chromogranin A and NCL-5D3 (cytokeratins 19, 18, 8) immunoreactivities. By contrast, they were serotonin negative. An intense staining for EMA was observed. These cells were obviously endocrine cells. Ultrastructural studies confirmed the presence of endocrine cells within the anal canal and the exocervix; moreover, in anal canal, some of these cells appeared to have contacts with a nerve terminal. Through the epidermis, these cells can only correspond to Merkel cells, because of their chromogranin positivity. Throughout other squamous epithelia, this population of endocrine cells (serotonin negative) bear some analogies with Merkel cells of epidermis. Their distribution, morphology, EMA immunoreactivity and ultrastructural appearance were reminiscent of those of the Merkel cells. They could be named Merkel-type cells. Additional studies, using other characteristic or specific markers of Merkel cells, are clearly required to determine the exact degree of analogy between these types of cells. Merkel-type cells could be largely distributed through stratified squamous epithelia from various tissues. They can be easily visualized by their strong EMA immunoreactivity and must be distinguished from Paget cells.
 ...
PMID:[Endocrine cells and Malpighian epithelium. Merkel-type cells? Immunohistochemical and ultrastructural study]. 208 58

Three cases of neuroendocrine carcinoma of the skin studied by light and electron microscopy and by immunohistochemical methods, are presented. It is generally accepted that these tumors originate from Merkel's cells. Some consider that they belong to the group of APUD-omas. Positive findings of epithelial (EMA, CAM 5.2) and neuroedocrine marker (NSE) in these three cases support the hypothesis of neuroendocrine differentiation in a neoplasm of epithelial origin.
 ...
PMID:[Primary neuroendocrine carcinoma of the skin (Merkel cell tumor)]. 209 74

Changes in the basement membrane (BM) in atrophic tubules in human kidney biopsies were studied by electron microscopy and by immunohistochemistry on cryostat sections with antibodies against collagen type I, type III, type IV, laminin, EMA, keratin and vimentin. The BM showed different degrees of thickening with formation of reduplications which contained fibrocytes. Remnants of cytoplasm of epithelial cells and fibrocytes were incorporated in the thickened BM. This showed signs of lysis and disintegration, indicating that the redundant BM formed by the epithelial cells is removed, although imperfectly, by interstitial cells. Thinning of the BM was another frequent finding. Immunohistochemistry showed a clear reactivity for collagen type IV and laminin in all BM material. The epithelial cells showed multilayering and a peculiar type of dark cells extending underneath adjacent cells and separating them from their BM attachment.
 ...
PMID:Basement membrane changes in atrophic tubules in the human kidney. 210 47

Monomer composition was examined to improve durability of matrix resin of visible light cured composite resin. As a monomer, five kinds of cyclophosphazene monomers, two kinds of commercial monomers and a mixture of commercial monomers were prepared to the visible light cured resins. The mechanical properties of these set products were examined with time after immersion in MeOH, an aging accelerating solvent. Compressive strength of the resins using cyclophosphazene monomers tended to decrease with time, but it increased in accordance with the increase of the number of polymerization group. Compressive strength of the resins using commercial monomers tended to decrease, but that using the BMPEPP monomer tended to increase with time. Yield point of the resins with the cyclophosphazene monomer 4 PN-(EMA)8 tended to increase with the time but that of the resins with other cases monomers decreased. The yield point of all three resins made using commercial monomers tended to decrease with time, but the rate of decrease was small for BMPEPP monomer. Compressive elastic modulus of the resins using cyclophosphazene monomers tended to increase with time when the number of polymerization group was 6-8, while it decreased when the number was 4-5. When commercial monomers were used, it tended to decrease with time, but the rate of decrease was small for the BMPEPP monomer. Transverse strength of the resins using cyclophosphazene monomers showed a tendency to decrease with time. When a commercial monomer was used, cracks appeared in the Bis-GMA+Tri-EDMA monomer after 7 days, and with the other two monomers, the transverse strength tended to decrease with time, though the rate of decrease was small for the BMPEPP monomer. Transverse elastic modulus tended to decrease with time, but the rate of decrease was small for the BMPEPP monomer.
 ...
PMID:[Visible light cured resin. Chronological change in mechanical properties of matrix resin immersed in MeOH]. 213 31

Radiopaque monomers were synthesized to examine their properties and the physical properties of their bulk polymers, to obtain basic data for new radiopaque filling composite resin. Octachlorocyclotetraphosphazene (P4N4Cl8) was used as material to be synthesized, and 2,4,6-tribromophenol, (Br3C6H2OH) and 2,4-dibromophenol (Br2C6H3OH) were selected as organic compounds having radiopacity. As a polymerizing functional group, 2-hydroxyethylmethacrylate (HEMA) was used. Radipaque monomers were synthesized as follows: 1 Cl of P4N4Cl8 was replaced by 1 mol of 2,4,6-tribromophenol, or 2 Cls by 2 mols of 2,4-dibromophenol, and the remaining 7 or Cls were replaced by HEMA, polymerizing functional group, to obtain 2 kinds of radiopaque monomers; 4 PN-(Br3Ph)1-(EMA)7 and 4 PN-(Br2Ph)2-(EMA)6. The specific gravity of these monomers was 1.4629 and 1.4978, refractive index 1.5315 and 1.5423 and viscosity, 70 and 80 poise respectively. Radiopacity was measured by an X-ray apparatus. Al equivalent, of specimen, 10 phi x 3 mm, 4 PN-(Br3Ph)1-(EMA)7 was 5.8 mm and 4 PN-(Br2Ph)2-(EMA)6 7.0 mm. 4 PN-(Br3Ph)1-(EMA)7 and 4 PN-(Br2Ph)2-(EMA)6, both wet specimens, had compressive strength of 83.7 and 81.3 MPa, in transverse strength of 45.5 and 53.0 MPa and knop hardness of 25.8 and 22.6 respectively. After 7 days, 4 PN-(Br3Ph)1-(EMA)7 had water sorption of 1.46 wt%, and 4 PN-(Br2Ph)2-(EMA)6, 0.84 wt%, and solubility of 0.15 and 0.14 wt%, respectively.
 ...
PMID:[Basic studies on radiopaque monomer. (3) Synthesis of monomers having Di-, tri-bromophenoxy groups, their properties, radiopacity and physical properties of their bulk polymers]. 213 32

A visible light-cured composite resin was developed. Cyclophosphazene monomer, 4 PN-(TF)1-(EMA)7 was prepared as a monomer. The ratio of brush abrasion, mechanical properties, water sorption, thermal expansion coefficient and the surface of abrasion were examined after mixing with fillers of different particle size (R-972, OX-50 and VL-30). The ratio of brush abrasion showed a tendency to be small when more than 50 wt% of VL-30 with a large particle size was mixed with 4 PN-(TF)1-(EMA)7 monomer. However its abrasion surface was rough compared with that of the microparticle filler. When the microparticle filler (50 wt% of OX-50) was mixed with the monomer, its mechanical properties were good for the mixture with 50 wt% OX-50. In that case, the ratio of brush abrasion was 0.268, compressive and transverse strength, 124.3 and 86.3 MPa respectively, hardness, 43.2 Hk, water absorption 14.2 micrograms/mm3 and thermal expansion coefficient, 47.4 x 10(-6)/degrees C.
 ...
PMID:[The development of visible light-cured composite resin. Kinds of fillers to be mixed with cyclophosphazene system monomers and its amount and its physical properties]. 213 36

The quantity of the remaining double bonds (RDB) in polymerized visible light cured resins has been determined. Five trial unfilled resins, eight commercial composite resins and three commercial crown and bridge resins were investigated by Fourier transform infrared spectrophotometer with the liquid-film method. Infrared absorbance was measured before irradiation and at various times after irradiation. The quantity of RDB was determined and the data expressed as percentage of the total amount of double bonds in the unpolymerized resins. The quantity of RDB of five trial unfilled resins decreased linearly corresponding to the logarithmic time after the start of irradiation. The difference in the quantity of RDB at 5 min and decreasing rate of RDB could be seen in accordance with the kind of monomer. Among five trial unfilled resins, one with BMPEPP (BPE-200) used as monomer gave the smallest RDB, and one with 4 PN-(TF)2-(EMA)6 used as monomer gave the largest value. The quantity of RDB in the unfilled resin with Tri-EDMA at 5 min decreased in accordance with the irradiation time, but after 1 month, it showed almost the same value irrespective of the irradiation time. The quantity of RDB of commercial composite resins and crown and bridge resins decreased linearly corresponding to logarithmic time. In all commercial resins, the quantity of RDB became small when the base monomer was Bis-GMA but large when it was UDMA.
 ...
PMID:[Visible light cured resin. Change of quantity of remaining double bonds in the surface low conversion layer by FT-IR method]. 215 40


<< Previous 1 2 3 4 5 6 7 8 9 10