Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0268318 (ICP)
 10,007 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

In this study, we used a multimaterial three-dimensional printing (3DP) technology and porous composite filaments (Lay-Fomm, Gel-Lay, and Lay-Felt) to fabricate solid phase extraction (SPE) columns for the enhanced extraction of multiple metal ions. When employed as sample pretreatment devices in an automatic flow injection analysis/inductively coupled plasma mass spectrometry (ICP-MS) system, these 3D-printed SPE columns performed the near-complete extractions of Mn, Co, Ni, Cu, Zn, Cd, and Pb ions from natural water samples prior to ICP-MS determination. After optimizing the column fabrication, the extraction conditions, and the automatic analysis system, the column packed with the porous composite Lay-Fomm 40 was found to provide the highest extraction performance-the extraction efficiencies of the listed metal ions were all greater than 99.2%, and the detection limits of the method ranged from 0.3 to 6.7 ng L-1. The detection of these metal ions in several reference materials (CASS-4, SLEW-3, 1640a, and 1643f) validated the reliability of this method; spike analyses of collected water samples (groundwater, river water, and seawater) demonstrated the applicability of the method. The nature of the printing materials enhanced the analytical performance of 3D-printed sample pretreatment devices. Such approaches will be useful to diversify the range of sample preparation schemes and analytical methods enabled by 3DP technologies.
 ...
PMID:3D-Printed Column with Porous Monolithic Packing for Online Solid-Phase Extraction of Multiple Trace Metals in Environmental Water Samples. 3261 86