Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0267964 (PAA)
 2,561 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Conjugation of proteins to copolymers from poly(acrylic acid) grafted onto PEO-PPO-PEO backbone (Pluronic-PAA) following adsorption of the conjugates onto hydrophobic surfaces is reported. Insulin-Pluronic-PAA conjugates show negligible internalization of insulin into human uterine smooth muscle cells as well as enhancement of mitogenic activity. Glucose-induced release of glycated albumin complexed with a Pluronic-PAA-concanavalin conjugate and adsorbed onto polystyrene nanospheres may provide a model for a glucose-responsive protein delivery system or a heterogeneous diagnostic device.
 ...
PMID:Bioactive surfaces via immobilization of self-assembling polymers onto hydrophobic materials. 1041 66

The capability of a family of copolymers comprising Pluronic (PEO-PPO-PEO) surfactants covalently conjugated with poly(acrylic acid) (Pluronic-PAA) to enhance the aqueous solubility and stability of the lactone form of camptothecin (CPT) was studied. The unprotected lactone form of CPT, which possesses cytotoxic activity, is rapidly converted to the ring-opened carboxylate form under physiological conditions. Firstly, surfactant properties such as critical micellization concentration (CMC) of Pluronic-PAA copolymers were characterized. Then, the equilibrium solubility partitioning and hydrolysis of the lactone form of CPT in the presence of Pluronic-PAA in water and in human serum were analyzed. CPT solubility in polymer micellar solutions was ca. 3- to 4-fold higher than that in water at pH 5. The amount of CPT solubilized per PPO was considerably greater in the Pluronic-PAA solutions than in the parent Pluronic solution, which suggests that the drug is not only solubilized by the hydrophobic cores and also by the hydrophilic POE-PAA shells of the micelles. The equilibrium partition coefficient of the CPT lactone between Pluronic-PAA solutions and water exceeded (2-3) x 10(3). The complete solubilization of CPT and the absence of chemical interactions between CPT and Pluronic-PAA were confirmed by modulated temperature differential scanning calorimetry (MTDSC), infrared spectroscopy, and X-ray diffraction of films. The loading of CPT into the Pluronic-PAA micelles was able to prevent the hydrolysis of the lactone group of the drug for 2 h at pH 8 in water. When compared to the unprotected CPT, the kinetics of the CPT hydrolysis in human serum was about 10-fold slower in the Pluronic-PAA formulations.
 ...
PMID:Solubilization and stabilization of camptothecin in micellar solutions of pluronic-g-poly(acrylic acid) copolymers. 1521 85

Transient rheological properties and mucoadhesion of hydrogels composed of poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-PPO-PEO, or Pluronic) block copolymers and poly(acrylic acid) were explored. Nine Pluronic copolymers ranging in nominal molecular weight and PPO/PEO content were grafted to PAA through C-C bonds, with or without the use of divinyl cross-linker, ethylene glycol dimethacrylate (EGDMA). The hydrogel elasticity increased with the PPO content in the copolymers, as well as in the presence of EGDMA. Tensile tests were conducted to measure the fracture strength and the work of adhesion between the hydrogels and rat intestinal tissue. The fracture strength was proportional to the gel pseudoequilibrium modulus and depended on the nominal length of the PPO segments in the parent Pluronic copolymer. The work of mucoadhesion and gel cohesion declined with the loss angle measured in oscillatory shear experiments. The length of the PEO segments in Pluronic affected the work of adhesion. Applications of the Pluronic-PAA gels as vehicles in oral drug delivery are discussed. The longest Pluronic copolymers bonded to PAA resulted in copolymeric gels with strongest mucoadhesive properties.
 ...
PMID:Bioadhesive properties and rheology of polyether-modified poly(acrylic acid) hydrogels. 1533 81

A new type of amphiphilic ABC triblock copolymer, poly(acrylic acid)(33)-poly(styrene)(47)-poly(ethylene oxide)(113) (PAA(33)-PS(47)-PEO(113)), was designed to assist the synthesis of core/shell structured CdTe nanowires via a one-step synthetic route. The PAA block was adopted to capture cadmium ions as the precursor of CdTe. Due to the bivalent coordination of Cd(2+), the copolymer in dioxane/H(2)O formed micelles with Cd(2+)-polychelate cores. Then CdTe nanocrystals were obtained within the micelles after introduction of NaHTe into the micelle solution. Transmission electron microscopy experiments revealed that the CdTe nanocrystals obtained simultaneously formed "pearl-necklace" aggregates in solution possibly driven by dipole interactions between neighboring particles, and then single crystalline CdTe nanowires upon reflux. Accompanying this morphology change, a phase transition from cubic zinc blende to wurtzite structure was observed by selected-area electron diffraction. The aggregation of the PS block in dioxane with a certain amount of H(2)O enabled the PS blocks to form a densely packed shell on the CdTe nanowires whose typical size is 700-800 nm in length and 15-20 nm in width. The third block of PEO was employed to render the finally formed CdTe nanowires dispersibility.
 ...
PMID:Amphiphilic ABC triblock copolymer-assisted synthesis of core/shell structured CdTe nanowires. 1583 96

The effect of pH on the complex formation between poly(acrylic acid) (PAA) and poly(ethylene oxide) (PEO) has been studied in aqueous solutions by turbidimetric and fluorescent methods. It was shown that the formation of insoluble interpolymer complexes is observed below a certain critical pH of complexation (pH(crit1)). The formation of hydrophilic interpolymer associates is possible above pH(crit1) and below a certain pH(crit2). The effects of polymer concentrations in solution and PEO molecular weight as well as inorganic salt addition on these critical pH values were studied. The polymeric films based on blends of PAA and PEO were prepared by casting from aqueous solutions with different pHs. These films were characterized by light transmittance measurements and differential scanning calorimetry. The existence of the pH value above which the polymers form an immiscible blend was demonstrated. The transitions between the interpolymer complex, miscible blend, and immiscible blend caused by pH changes are discussed. The recommendations for preparation of homogeneous miscible films based on compositions of poly(carboxylic acids) and various nonionic water-soluble polymers are presented.
 ...
PMID:PH effects in the complex formation and blending of poly(acrylic acid) with poly(ethylene oxide). 1587 16

We report the development of a solid polymer electrolyte film from hydrogen bonding layer-by-layer (LBL) assembly that outperforms previously reported LBL assembled films and approaches battery integration capability. Films were fabricated by alternating deposition of poly(ethylene oxide) (PEO) and poly(acrylic acid) (PAA) layers from aqueous solutions. Film quality benefits from increasing PEO molecular weight even into the 10(6) range due to the intrinsically low PEO/PAA cross-link density. Assembly is disrupted at pH near the PAA ionization onset, and a potential mechanism for modulating PEO:PAA ratio within assembled films by manipulating pH is discussed. Ionic conductivity of 5 x 10(-5) S/cm is achievable after short exposure to 100% relative humidity (RH) for plasticization. Adding free ions by exposing PEO/ PAA films to lithium salt solutions enhanced conductivity to greater than 10(-5) S/cm at only 52% RH and tentatively greater than 10(-4) S/cm at 100% RH. The excellent stability of PEO/PAA films even when exposed to 1.0 M salt solutions led to an exploration of LBL assembly with added electrolyte present in the adsorption step. Fortuitously, the modulation of PEO/PAA assembly by ionic strength is analogous to that of electrostatic LBL assembly and can be attributed to electrolyte interactions with PEO and PAA. Dry ionic conductivity was enhanced in films assembled in the presence of salt as compared to films that were merely exposed to salt after assembly, implying different morphologies. These results reveal clear directions for the evolution of these promising solid polymer electrolytes into elements appropriate for electrochemical power storage and generation applications.
 ...
PMID:Highly ion conductive poly(ethylene oxide)-based solid polymer electrolytes from hydrogen bonding layer-by-layer assembly. 1598 79

Cadmium sulfide (CdS) quantum dots (QDs) are formed within poly(ethylene oxide)-block-polystyrene-block-poly (acrylic acid) (PEO-b-PS-b-PAA) triblock copolymer aggregates of different architectures. These structures are obtained starting with the same ionically cross-linked primary micelles consisting of a cadmium acrylate core, a PS shell, and a PEO corona. One morphology is a worm-shaped micelle prepared in tetrahydrofuran (THF) in which the CdS QDs are surrounded by the PAA and aligned as a loose necklace in the PS matrix. The PEO serves as a corona around the PS rod. Another structure is a multicore spherical (ca. 50 nm) water soluble PS micelle, surrounded by PEO chains. The CdS particles within these two latter structures are formed by the reaction of cadmium ions present in the acrylate cores with hydrogen sulfide. In a third structure, the CdS QDs are located on the surface of PS micelles. A fourth spherical single-core micelle structure is postulated to exist in dilute THF solutions. The dimensions in all the aggregates can be controlled by the block length.
 ...
PMID:Cadmium sulphide quantum dots in morphologically tunable triblock copolymer aggregates. 1601 70

Potential utility of copolymers comprising Pluronic (PEO-PPO-PEO) surfactants covalently conjugated with poly(acrylic acid) (PAA) as excipients for sustained-release tablets was explored. Apparent particle density, particle size distribution, Carr index, thermal stability, and compression behavior of the Pluronic-PAA copolymers were characterized. Tablets prepared by direct compression of blends of Pluronic-PAA copolymers were evaluated on the basis of their thermomechanical profile, crushing strength, friability, and drug release properties. Small molecular weight drugs of aqueous solubility decreasing in the order theophylline>hydrochlorothiazide>nitrofurantoin were incorporated to the tablets. For comparison purposes, tablets were also prepared from PAA of Carbopol 71G (C71G), and mixtures of C71G and Pluronic F127, with each of the above three drugs. The Pluronic-PAA aggregates are stabilized by hydrophobic associations between poly(propylene oxide) (PPO) segments in aqueous solutions, and thus require higher ionization of the carboxylic groups to overcome the associations and swell. The swelling pattern of the Pluronic-PAA copolymers is more dramatically pH-dependent than that of Carbopol lacking any hydrophobic associations. The drug retention in and release from the Pluronic-PAA based tablets is profoundly pH-dependent and hence specific to the pH exceeding that of the pK(a)>5 of these copolymers. Theophylline- and hydrochlorotiazide-containing tablets made with Pluronic-PAA copolymers showed a reduced release rate under acidic conditions compared to the neutral or alkaline conditions, while the opposite pattern was observed with the Carbopol-based tablets due to the different pH-dependent swelling behavior of the polymers. Nitrofurantoin-containing tablets showed a remarkably low drug release rate owing to the strong hydrophobic character of nitrofurantoin and of its complexes with the copolymers. Integrity of the nitrofurantoin-containing tablets was maintained during the 24h release test. Zero-order kinetics of the cumulative release profile of all drugs under study was observed with the Pluronic-PAA as a tablet excipient. Adequate mechanical properties, the self-assembling behavior, and the pH-sensitiveness of the Pluronic-PAA copolymers make them promising excipients for tablets with preferential delivery into a neutral to alkaline pH environment.
 ...
PMID:Pluronic-g-poly(acrylic acid) copolymers as novel excipients for site specific, sustained release tablets. 1616 45

The effects of a poly(acrylic acid) (PAA)-poly(ethylene) (PEO) comb polymer dispersant on the rheological properties and inter-particle forces in aqueous silica suspensions have been studied under varying pH conditions. The comb polymer was found to adsorb more strongly under acidic than basic conditions, indicating that the PAA backbone of the copolymer preferentially adsorbs onto silica surfaces with the PEO "teeth" extending out from the surface into the solution. In the presence of low concentrations of copolymer, the silica suspensions were stable due to electrostatic repulsions between the silica surfaces. At higher copolymer concentrations and under neutral and basic conditions, where the copolymer interacted only weakly with silica, the suspensions showed a transition from a dispersed to weakly flocculated state and attractive forces were measured between silica surfaces. Under acidic conditions, the silica dispersion also destabilized at intermediate copolymer adsorbed density and then was re-stabilized at higher adsorbed coverage. The silica suspensions were stable at high copolymer coverage due to steric repulsions between the particles. The destabilization at intermediate coverage is thought to be due to polymer bridging between particles or possibly depletion forces.
 ...
PMID:PAA/PEO comb polymer effects on rheological properties and inter-particle forces in aqueous silica suspensions. 1625 4

We report herein biotin-streptavidin-mediated aggregation studies of long gold nanorods. We have previously demonstrated end-to-end linkages of gold nanorods driven by the biotin-streptavidin interaction (Caswell et al. J. Am. Chem. Soc. 2003, 125, 13914). In that report, the specific binding of biotin disulfide to the gold nanorod edges was achieved due to the preferred binding of thiol molecules to the Au[111] surface (gold nanorod ends) as opposed to the gold nanorod side faces. This led to the end-end linkage of gold nanorods upon subsequent addition of streptavidin. In this report we demonstrate a simple procedure to biotinylate the entire gold nanorod surface and subsequently form a 3-D assembly by addition of streptavidin. Gold nanorods were synthesized by the three-step seeding protocol documented in our previous articles. The surface of gold nanorods was further modified by a layer of a weak polyelectrolyte, poly(acrylic acid), PAA. A biotin molecule which has an amine group at one end (biotin-PEO-amine) was anchored to the carboxylic acid group of the polyelectrolyte using the well-known carbodiimide chemistry. This process biotinylates the entire gold nanorod surface. Addition of streptavidin further leads to aggregation of gold nanorods. A closer look at the aggregates reveals a preferential side-to-side assembly of gold nanorods. The gold nanorods were characterized at each stage by UV-vis spectroscopy, light scattering, and transmission electron microscopy (TEM) measurements.
 ...
PMID:Biotin-streptavidin-induced aggregation of gold nanorods: tuning rod-rod orientation. 1626 48


1 2 3 4 5 6 7 8 9 10 Next >>