Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0267964 (PAA)
 2,561 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

A series of polymeric ophthalmic inserts containing pilocarpine were formulated with four different types of polyvinyl alcohol, PVA, and two types of hydroxypropylcellulose. Pilocarpine was present as the nitrate, or as the salt with polyacrylic acid, PAA. In-vivo miosis vs time experiments on albino rabbits, showed that all inserts increased significantly the bioavailability of pilocarpine, with respect to a standard solution of pilocarpine nitrate. Two PVA inserts, containing the PAA-salt of pilocarpine, were particularly effective. The preparations were also submitted to in-vitro release tests and to differential scanning calorimetry, to ascertain the release mechanism, and to verify, via the thermal behaviour, possible interactions between drug and polymers. The chemical and physiochemical factors, most likely to influence the ophthalmic bioavailability of pilocarpine from the present preparations, are briefly reviewed.
 ...
PMID:Vehicle effects in ophthalmic bioavailability: an evaluation of polymeric inserts containing pilocarpine. 614 68

In order to overcome the biological deficiencies of synthetic polymers and to enhance the mechanical characteristics of natural polymers, two synthetic polymers, poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAA) were blended, in different ratios, with two biological polymers, collagen (C) and hyaluronic acid (HA). These blends were used to prepare films, sponges and hydrogels which were loaded with growth hormone (GH) to investigate their potential use as drug delivery systems. The GH release was monitored in vitro using a specific enzyme-linked immunosorbent assay. The results show that GH can be released from HA/PAA sponges and from HA/PVA and C/PVA hydrogels. The initial GH concentration used for sample loading affected the total quantity of GH released but not the pattern of release. The rate and quantity of GH released was significantly dependent on the HA or C content of the polymers.
 ...
PMID:Blends of synthetic and natural polymers as drug delivery systems for growth hormone. 749 22

A cationic, high-water-content hydrogel membrane composed of poly(vinyl alcohol) (PVA) and poly(ally-biguanido-co-allylamine) hydrochloride (PAB) with positively charged biguanido groups that resemble arginine residues was developed. The PAB was prepared by reacting poly(allylamine) hydrochloride (PAA) with guanyl-O-methyl isourea. PAB/PVA hydrogel membranes were prepared by repeated freezing and thawing. For comparison, hydrogel membranes composed of PAA and PVA were also prepared. The interaction between these hydrogel membranes and mouse fibroblast (L929) was studied by a cell culture method. The PAB hydrogel blend had a relatively low percentage of initial cell attachment. The cell growth on the PAB hydrogel membranes showed a maximum at 5 mol % PAB content that was as high as commercially available plastic films. However, cells on hydrogel membranes with 50 mol % PAB content and 0 mol % PAB content (only PVA) did not seem to grow; neither did the 5/95 PAA/PVA membranes. Water contact angles of hydrogel membranes did not vary with the PAB content. Morphology of the cell attachment was observed by SEM. On the PAB blend hydrogel surfaces, cells were not spindle-shaped and monolayers, but rather cells aggregated in spherical clusters.
 ...
PMID:Cell growth on poly(vinyl alcohol) hydrogel membranes containing biguanido groups. 800 50

The axi-symmetric drop-shape analysis-pendant drop technique has been used to measure interfacial tension at the chlorobenzene-water interface in the presence of adsorbed films of dimyristoylphosphatidylcholine (DMPC), dipalmitoylphosphatidylcholine (DPPC), DMPC-cholesterol, DPPC-cholesterol, DMPC-cholesterol-dicetyl phosphate (DCP) and DPPC-cholesterol-DCP. A surface-pressure function, pi * = pi lipid-polymer -pi lipid (where pi lipid is the surface pressure of the mono-layer without polymer and pi lipid-polymer is the surface pressure of the lipid mono-layer and adsorbed polymer at equilibrium at the chlorobenzene-water interface) was used to characterize the interaction of eight water-soluble polymers with the lipid films. The equation, delta pi * = pi II*-pi I* (where the subscripts II and I denote the higher and lower lipid composites, respectively) was used to determine the differential effect of cholesterol and DCP on mono-layer characteristics in the presence of 1% w/v polymer. Cholesterol or polymer individually condensed DMPC films and expanded DPPC films. However, composite films of DMPC-cholesterol-DCP and carboxymethylchitin (CM-chitin), poly(acrylic acid) (PAA) or poly(vinyl alcohol) (PVA) were more expanded than DMPC films whereas composite films of DPPC were neither more condensed nor expanded than DPPC films. A polymer impact ratio, P* = pi lipid-polymer/pi lpolymer was calculated and the polymers were ranked in order of their impact on the lipid film. PVA and polysaccharides gave low and high P* values, respectively, corresponding to high and low levels of film interaction, whereas PAA and hydrophobized polysaccharides gave intermediate values, indicating their affinity for and penetration of interfacial films with little disruption of the mono-layer. The results show that measurement of interfacial pressures at the chlorobenzene-water interface might be advantageous for evaluating the action of polymers on biological membranes.
 ...
PMID:An interfacial tension model of the interaction of water-soluble polymers with phospholipid composite monolayers. 933 Jan 96

The synthesis of a terminally thiolated poly(vinyl)alcohol (PVA) grafted with Poly (acrylic acid) (PAA) side chains is described. The PVA-PAA graft polymer (PVAg) was end-tethered to silver surfaces via the terminal thiol functionality and the resultant mobile, hydrophilic polymer matrix exploited for the covalent immobilization of large quantities of polyclonal goat (anti-hIgG) antibody (IgG) with low levels of non-specific adsorption. An SPR immunosensor, fabricated with an IgG-PVA-silver interfacial layer proved capable of performing a sensitive label-free assay of human IgG antigen (hIgG) with minimal non-specific binding interference. A detection limit (DL) for hIgG from serum of 0.8 microgram/ml (5 nM) and an assay sensitivity of 0.66 ng hIgG/mm2/nM are reported.
 ...
PMID:Covalent coupling of immunoglobulin G to a poly(vinyl)alcohol-poly(acrylic acid) graft polymer as a method for fabricating the interfacial-recognition layer of a surface plasmon resonance immunosensor. 964 73

Hydrogels of poly(vinyl alcohol) (PVA), poly(acrylic acid) (PAA), and their interpenetrating networks (IPNs) were prepared using glutaraldehyde and ethylene glycol dimethacrylate as crosslinking agents. The hydrogels were characterized by measuring their equilibrium polymer volume fraction, equilibrium swelling ratio, and mesh size. Drug and protein diffusion through these hydrogels were studied. Solutes studied included theophylline, vitamin B12 and myoglobin. The ratio of PVA and PAA in the IPNs was varied to study the effect of ionic polymer content on the polymer/drug interactions and on the drug diffusion rate. Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy was used to analyze the polymer/drug binding interactions. It was concluded that drug diffusion may be impeded by associated drug binding, especially in IPN hydrogels containing high amounts of PAA.
 ...
PMID:Drug diffusion and binding in ionizable interpenetrating networks from poly(vinyl alcohol) and poly(acrylic acid). 970 19

The adsorption of poly(acrylic acid) (PAA) and poly(vinyl alcohol) (PVA) onto alumina has been studied as a function of pH, both individually and in the presence of each other. The adsorption density of PAA is found to decrease with an increase of pH while that of PVA shows the opposite trend. In a binary system containing PAA and PVA, the presence of PVA does not affect the adsorption of PAA onto alumina, but the addition of PAA diminishes the adsorption of PVA in the pH range investigated. The adsorption isotherm of PAA at acidic pH exhibits high-affinity Langmuirian behavior. The isotherms for PVA appear rounded and are of the low-affinity type. Once again the adsorption isotherms of PAA remain unaltered in the presence of PVA whereas those of PVA are significantly affected resulting in a lowering of the adsorption density consequent to PAA addition. A variation in the sequence of addition of PAA and PVA does not affect the adsorption behavior of either of the polymers. The electrokinetic behavior of alumina with PAA is hardly influenced by the addition of PVA. On the other hand, the electrophoretic mobility of alumina in the presence of PVA is significantly altered in the presence of PAA and closely resembles the trend observed with PAA alone. Desorption studies reveal that over 80% of PVA could be desorbed in the pH range 3-9 whereas in the case of PAA, the percent desorption increases from 20 to about 70% as the pH is increased from about 3 to 8. Solution conductivity tests confirm interaction of aluminum species and PAA in the bulk solution. FTIR spectroscopic data provide evidence in support of hydrogen bonding and chemical interaction in the case of the PAA-alumina system and hydrogen bonding with respect to the PVA-alumina interaction. Copyright 1999 Academic Press.
 ...
PMID:Surface Chemical Studies on the Competitive Adsorption of Poly(acrylic acid) and Poly(vinyl alcohol) onto Alumina. 1039 72

Bioartificial polymeric materials, based on blends of polysaccharides with synthetic polymers such as poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAA), were prepared as films or hydrogels. The physico-chemical, mechanical, and biological properties of these materials were investigated by different techniques such as differential scanning calorimetry, dynamic mechanical thermal analysis, scanning electron microscopy, and in vitro release tests, with the aim of evaluating the miscibility of the polymer blends and to establish their potential applications. The results indicate that while dextran is perfectly miscible with PAA, dextran/PVA, chitosan/PVA, starch/PVA, and gellan/PVA blends behave mainly as two-phase systems, although interactions can occur between the components. Cross-linked starch/PVA films could be employed as dialysis membranes: they showed transport properties comparable to, and in some cases better than, those of currently used commercial membranes. Hydrogels based on dextran/PVA and chitosan/PVA blends could find applications as delivery systems. They appeared able to release physiological amounts of human growth hormone, offering the possibility to modulate the release of the drug by varying the content of the biological component.
 ...
PMID:Bioartificial polymeric materials based on polysaccharides. 1148 36

Sequential interpenetrating network (IPN) of poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAA) were prepared and crosslinked with glutaraldehyde (GA) to form pH-sensitive microspheres by the water-in-oil (w/o) emulsification method. Microspheres were used to deliver a model anti-inflammatory drug, diclofenac sodium (DS), to the intestine. The formed IPN was analyzed by Fourier transform infrared spectroscopy (FTIR). Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) analyses were done on the drug-loaded microspheres to confirm the polymorphism of DS. Results indicated a molecular level dispersion of DS in the IPN. Microspheres formed were spherical with the smooth surfaces as evidenced by scanning electron microscopy (SEM). Particle size and size distribution was studied using laser light diffraction particle size analyzer. Particle size analysis was also done by optical microscope for the selected microspheres; the change in diameter of the microspheres when soaked in different media at different time intervals was measured by optical microscope. Microspheres showed a pulsatile swelling behavior when the pH of the swelling media was changed. The swelling data were fitted to an empirical equation to understand the phenomenon of water transport as well as to calculate the diffusion coefficient (D). Values of D in acidic media were lower than those found in basic media. The values of D decrease with increasing crosslinking of the matrix. In-vitro release studies have been performed in 1.2 and 7.4 pH media to simulate gastric and intestinal conditions. The results indicated a dependence on the pH of the release media, extent of crosslinking and the amount of drug loading.
 ...
PMID:Poly(vinyl alcohol) and poly(acrylic acid) sequential interpenetrating network pH-sensitive microspheres for the delivery of diclofenac sodium to the intestine. 1506 25

The effect of pH on the complexation of poly(acrylic acid) with poly(vinyl alcohol) in aqueous solution, the miscibility of these polymers in the solid state and the possibility for crosslinking the blends using gamma radiation has been studied. It is demonstrated that the complexation ability of poly(vinyl alcohol) with respect to poly(acrylic acid) is relatively low in comparison with some other synthetic non-ionic polymers. The precipitation of interpolymer complexes was observed below the critical pH of complexation (pH(crit1)), which characterizes the transition between a compact hydrophobic polycomplex and an extended hydrophilic interpolymer associate. Films prepared by casting from aqueous solutions at different pH values exhibited a transition from miscibility to immiscibility at a certain critical pH, pH(crit2), above which hydrogen bonding is prevented. It is shown here that gamma radiation crosslinking of solid blends is efficient and only results in the formation of hydrogel films for blends prepared between pH(crit1) and pH(crit2). The yield of the gel fraction and the swelling properties of the films depended on the absorbed radiation dose and the polymer ratio. [Diagram: see text] SEM image of an equimolar PAA-PVA blend cast from a pH 4.6 solution.
 ...
PMID:pH effects on the complexation, miscibility and radiation-induced crosslinking in poly(acrylic acid)-poly(vinyl alcohol) blends. 1588 88


1 2 3 4 5 6 7 8 Next >>