Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0267964 (PAA)
 2,561 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

A new technique for treating anion exchangers has been proposed allowing direct capture of the fermentation product, shikimic acid directly from the cell-containing fermentation broth. A layer of hydrophilic polymer, poly(acrylic acid) (PAA) has been physically adsorbed on the anion exchanger followed by a covalent cross-linking of PAA. The PAA layer is penetrable for small molecules despite being negatively charged as PAA is, but the polymer layer repels large negatively charged structures like cell debris and cells preventing them from adsorption to the chromatographic matrix. The binding capacity for pure shikimic was about 81 mg/ml adsorbent for both cross-linked PAA-Amberlite and native Amberlite in the fluidized mode of column operation. Binding capacity dropped to 17 and 15 mg per ml adsorbent, respectively, when using filtrated fermentation broth and to about 10 mg/ml adsorbent for cross-linked PAA-Amberlite when using directly the fermentation broth containing cells. Native Amberlite cannot be used for the direct capture of shikimic acid due to the immediate clogging of the column and the collapse of the expanded bed. The cross-linked PAA-Amberlite was used repeatedly for the direct adsorption of shikimic acid from the industrial fermentation broth.
 ...
PMID:Direct capture of product from fermentation broth using a cell-repelling ion exchanger. 1182 78

An amphiphilic heteroarm star polymer containing 12 alternating hydrophobic/hydrophilic arms of polystyrene (PS) and poly(acrylic acid) (PAA) connected to a well-defined rigid aromatic core was studied at the air-water and the air-solid interfaces. At the air-water interface, the molecules spontaneously form pancakelike micellar aggregates which measure up to several microns in diameter and 5 nm in thickness. Upon reduction of the surface area per molecule to 7 nm2, the two-dimensional micelles merged into a dense monolayer. We suggest that confined phase separation of dissimilar polymer arms occurred upon their segregation on the opposite sides of the rigid disklike aromatic core, forcing the rigid cores to adopt a face-on orientation with respect to the interface. Upon transfer onto solid supports the PS chains face the air-film interface making it completely hydrophobic, and the PAA chains were found to collapse and form a thin flattened underlayer. This study points toward new strategies to create large 2D microstructures with facial amphiphilicity and suggests a profound influence of star molecular architecture on the self-assembly of amphiphiles at the air-water interface.
 ...
PMID:Interfacial micellar structures from novel amphiphilic star polymers. 1546 85

Block copolymers containing stimuli-responsive segments provide important new opportunities for controlling the activity and aggregation properties of protein-polymer conjugates. We have prepared a RAFT block copolymer of a biotin-terminated poly(N-isopropylacrylamide) (PNIPAAm)-b-poly(acrylic acid) (PAA). The number-average molecular weight (M(n)) of the (PNIPAAm)-b-(PAA) copolymer was determined to be 17.4 kDa (M(w)/M(n) = 1.09). The PNIPAAm block had an M(n) of 9.5 kDa and the poly(acrylic acid) (PAA) block had an M(n) of 7.9 kDa. We conjugated this block copolymer to streptavidin (SA) via the terminal biotin on the PNIPAAm block. We found that the usual aggregation and phase separation of PNIPAAm-SA conjugates that follow the thermally induced collapse and dehydration of PNIPAAm (the lower critical solution temperature (LCST) of PNIPAAm is 32 degrees C in water) is prevented through the shielding action of the PAA block. In addition, we show that the cloud point and aggregation properties (as measured by loss in light transmission) of the [(PNIPAAm)-b-(PAA)]-SA conjugate also depended on pH. At pH 7.0 and at temperatures above the LCST, the block copolymer alone was found to form particles of ca. 60 nm in diameter, while the bioconjugate exhibited very little aggregation. At pH 5.5 and 20 degrees C, the copolymer alone was found to form large aggregates (ca. 218 nm), presumably driven by hydrogen bonding between the -COOH groups of PAA with other -COOH groups and also with the -CONH- groups of PNIPAAm. In comparison, the conjugate formed much smaller particles (ca. 27 nm) at these conditions. At pH 4.0, however, large particles were formed from the conjugate both above and below the LCST (ca. 700 and 540 nm, respectively). These results demonstrate that the aggregation properties of the block copolymer-SA conjugate are very different from those of the free block copolymer, and that the outer-oriented hydrophilic block of PAA shields the intermolecular aggregation of the block copolymer-SA bioconjugate at pH values where the -COOH groups of PAA are significantly ionized.
 ...
PMID:Controlling the aggregation of conjugates of streptavidin with smart block copolymers prepared via the RAFT copolymerization technique. 1702 47

A series of novel polymeric nanogels with core-shell morphology was developed. Block ionomer complexes of comb-graft poly(ethylene oxide)-b-poly(polypropylene oxide)-b-poly(ethylene oxide)-g-poly(acrylic acid) copolymers (Pluronic-PAA) and divalent metal cations were utilized as micellar templates for the synthesis of nanogels with sizes ranging from 100 to 200 nm in diameter. The Pluronic-PAA nanogels were confirmed to possess ionic cross-linked PAA cores and flexible hydrophilic shells from the Pluronic copolymer chains. The ionic character of the core provided for pH-dependent swelling/collapse behavior of the nanogels. These prepared nanogels are expected to be of utility as carriers for charged therapeutic or diagnostic agents.
 ...
PMID:Template-assisted synthesis of nanogels from Pluronic-modified poly(acrylic acid). 1709 36

The two-dimensional self-assembly at the air/water (A/W) interface of two dendrimer-like copolymers based on polystyrene and poly(tert-butyl acrylate) (PS-b-PtBA) or poly(acrylic acid) (PS-b-PAA) was investigated through surface pressure measurements (isotherms, isochores, and compression-expansion hysteresis experiments) and atomic force microscopy (AFM) imaging. The two dendrimer-like block copolymers have an 8-arm PS core (Mn = 10 000 g/mol, approximately 12 styrene repeat units per arm) with a 16-arm PtBA (Mn = 230 000 g/mol, approximately 112 tert-butyl acrylate repeat units per arm) or PAA (Mn = 129 000 g/mol, approximately 112 acrylic acid repeat units per arm) corona. The PS-b-PtBA sample forms stable Langmuir monolayers and aggregates into circular surface micelles up to a plateau observed in the corresponding isotherm around 24 mN/m. Beyond this threshold, the monolayers collapse above the interface, resulting in the formation of large and irregular desorbed aggregates. The PS-b-PAA sample has ionizable carboxylic acid groups, and its A/W interfacial self-assembly was therefore investigated for various subphase pH values. Under basic conditions (pH = 11), the carboxylic acid groups are deprotonated, and the PS-b-PAA sample is therefore highly water-soluble and does not form stable monolayers, instead irreversibly dissolving in the aqueous subphase. Under acidic conditions (pH = 2.5), the PS-b-PAA sample is less water-soluble and becomes surface-active. The pseudoplateau observed in the isotherm around 5 mN/m corresponds to a pancake-to-brush transition with the PAA chains dissolving in the water subphase and stretching underneath the anchoring PS cores. AFM imaging revealed the presence of circular surface micelles for low surface pressures, whereas the biphasic nature of the pseudoplateau region was confirmed with the gradual aggregation of the micellar PS cores above the PAA chains. The aggregation numbers for both samples were estimated around 3-5 dendrimer-like copolymers per circular surface micelle. These rather low values confirmed the tremendous influence of molecular architecture on the two-dimensional self-assembly of block copolymers.
 ...
PMID:Polystyrene-b-poly(tert-butyl acrylate) and polystyrene-b-poly(acrylic acid) dendrimer-like copolymers: two-dimensional self-assembly at the air-water interface. 1730 7

The formation of soluble hydrogen-bonding interpolymer complexes between poly(acrylic acid) (PAA) and poly(acrylic acid-co-2-acrylamido-2-methyl-1-propane sulfonic acid)-graft-poly(N,N-dimethylacrylamide) (P(AA-co-AMPSA)-g-PDMAM) at pH=2.0 was studied. A viscometric study showed that in semidilute solution a physical gel is formed due to the interconnection of the anionic P(AA-co-AMPSA) backbone of the graft copolymer, in a transient network, by means of the complexes formed between the PDMAM side chains of the graft copolymer and PAA. Dynamic and static light scattering measurements, in conjunction with small-angle neutron scattering measurements, suggest the formation of core-shell colloidal nanoparticles in dilute solution, comprised by an insoluble PAA/PDMAM core surrounded by an anionic P(AA-co-AMPSA) corona. Even if larger clusters are formed in semidilute solution, the size of the insoluble core remains practically stable. Atomic force microscopy performed under ambient conditions reveal that the particles collapse and flatten upon deposition on a substrate, with dimensions close to the ones of the dry hydrophobic core.
 ...
PMID:Characterization of the core-shell nanoparticles formed as soluble hydrogen-bonding interpolymer complexes at low pH. 1790 Jan 98

Poly(acrylic acid) (PAA) chains exhibit conformational change in response to pH, whereas bromate-sulfite-ferrocyanide (BSF) solution shows pH oscillation between 3.2 and 6.6. By use of quartz crystal microbalance with dissipation (QCM-D), we have investigated the pH induced conformational change of PAA brushes under a continuous flow of BSF solution in real time. The changes in frequency and dissipation clearly indicate the periodic swelling and collapse of brushes with pH oscillation. The changes in thickness, viscosity, and elastic modulus further indicate the oscillation of the interface.
 ...
PMID:Periodic swelling and collapse of polyelectrolyte brushes driven by chemical oscillation. 1866 35

Chemically cross-linked poly(N-isopropylacrylamide) (PNIPAM) microgels and PNIPAM with different amounts of acrylic acid groups (PNIPAM-co-PAA) were synthesized and the temperature-induced aggregation behaviors of aqueous suspensions of these microgels were investigated mainly with the aid of dynamic light scattering (DLS) and turbidimetry. The DLS results show that the particles at all conditions shrink at temperatures up to approximately the lower critical solution temperature (LCST), but the relative contraction effect is larger for the microgels without acid groups or for microgels with added anionic surfactant (SDS). A significant depression of the cloud point is found in suspensions of PNIPAM with very low concentrations of SDS. The compression of the microgels cannot be traced from the turbidity results, but rather the values of the turbidity increase in this temperature interval. This phenomenon is discussed in the framework of a theoretical model. At temperatures above LCST, the size of the microgels without attached charged groups in a very dilute suspension is unaffected by temperature, while the charged particles (pH 7 and 11) continue to collapse with increasing temperature over the entire domain. In this temperature range, low-charged particles of higher concentration and particles containing acrylic acid groups at low pH (pH 2) aggregate, and macroscopic phase separation is approached at higher temperatures. This study demonstrates how the stabilization of microgels can be affected by factors such as polymer concentration, addition of ionic surfactant to particles without charged acid groups, amount of charged groups in the polymer, and pH.
 ...
PMID:Effects of temperature and pH on the contraction and aggregation of microgels in aqueous suspensions. 1961 21

Two poly(2-(dimethylamino)ethyl methacrylate)-b-poly(acrylic acid) diblock copolymers, PDMAEMA(84)-b-PAA(18) and PDMAEMA(50)-b-PAA(18), were synthesized by the atom transfer radical polymerization (ATRP) and their dual-stimuli responsive behaviors to the changes in temperature and pH in aqueous solutions were investigated by UV-vis spectroscopy, dynamic light scattering (DLS), (1)H NMR spectroscopy and surface tension measurement. Different from PDMAEMA(84)-b-PAA(18) solutions where no aggregation is observed between pH 7.0 and 9.5, the PDMAEMA(50)-b-PAA(18) aggregates can exist in this broad pH range due to the hydrophobic interactions among the charge-balanced polyampholyte chains. At high pH, e.g., 11.0, the DMAEMA segments collapse to form the core of micelles due to the hydrophobic property of the de-protonized DMAEMA stabilized with the highly ionized AA segments on the surface of the micelles upon heating. At pH around the IEP, e.g., 9.5, large micelles can be formed in PDMAEMA(84)-b-PAA(18) solution upon heating, just like that at pH 11.0, while PDMAEMA(50)-b-PAA(18) first formed the micelles due to the electrostatic attraction between ionized AA segments and protonated DMAEMA segments, but the aggregation of the micelles was hardly happened upon heating due to the smaller DMAEMA segment. Moreover, LCST can be exactly estimated by surface tension experiment.
 ...
PMID:Dual-stimuli responsive behaviors of diblock polyampholyte PDMAEMA-b-PAA in aqueous solution. 2131 62

The mechanism of the transition from a continuous morphology to a porous morphology within polyelectrolyte multilayers (PEMs) of linear poly(ethylene imine) (LPEI) and poly(acrylic acid) (PAA) and poly(allylamine hydrochloride) (PAH) and PAA assembled by the layer-by-layer (LbL) technique is examined. These morphological changes were created by both acidic and basic postassembly treatments. Basic postassembly treatment is shown to create different types of porosity than acidic postassembly treatment. The morphological variation from the introduction of porosity to the collapse of these porous structures and the dissolution of films under postassembly treatments was observed by AFM, optical microscopy, quartz crystal microbalance (QCM), and SEM. These morphological transitions which are a result of structural rearrangement of weak polyelectrolytes due to pH changes are closely related to the neutralization of the polycations and the ionization of polyanions. Results obtained from FTIR spectroscopy and QCM confirm that polyelectrolytes are being selectively or partially released from the polyelectrolyte multilayers thin films (PEMs) in response to the pH treatment as a function of exposure time. In conclusion, here new information is presented about the structural reorganization found in a number of weak polyelectrolyte systems. This information will be useful in designing functional materials based on polyelectrolytes.
 ...
PMID:Film stability during postassembly morphological changes in polyelectrolyte multilayers due to acid and base exposure. 2207 Apr 31


1 2 3 Next >>