Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0205700 (ash)
 15,125 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The proximate composition of frozen red porgy (Pagrus pagrus) was determined. The moisture, ash, protein and total lipids (45.5+/-1.4% PL of which 90.4+/-2.0% PhL) were found to be 71.7+/-1.0%, 1.73+/-0.12%, 21.5+/-0.8% and 0.81+/-0.09% of the wet muscle tissue, respectively. 16:0 and 18:0 were the main SFA, 18:1 (omega-9 and omega-7) the main MUFA while DHA, EPA and arachidonic acid were the main polyunsaturated fatty acids (PUFA). The SFA/PUFA ratio was 1.5 and the omega-3/omega-6 ratio was 3.02. The cholesterol content was found to be 8.18+/-0.34 mg/100 g of the wet muscle tissue. Ni, Cr, Mn, Cu, Zn, Fe and Mg were determined in the muscles, skin, hepatopancreas and head of the fish. The covering percentage of the recommended daily allowance/intake (RDA/RDI) for each mineral, in the muscle tissue, has been calculated to 14.2% (males) and 7.89% (females) for Fe, 2.87% for Cu, 4.07% for Zn 0.4% for Mn, 13.9% for Ni, 20.2% for Cr and 10.4% for Mg.
 ...
PMID:Proximate composition, fatty acids, cholesterol, minerals in frozen red porgy. 1728 Jun 56

A kind of compound additive was studied and prepared in the paper, which associated with many functions. Using typical fly ash of Shanghai and Fuzhou, We studied the effect of the additive on evaporation rate, flowing temperature, fixed rate of heavy metals and its leaching characteristics in melting slag in the process of melting fly ash. The result showed that the flowing temperature and the evaporation rate of fly ash could be respectively reduced approximately 150 degrees C and 10% - 20% by adding 10% additive, and the fixed rate of heavy metals Cu and Pb increased 10% - 20%, especially Zn, which could increase 40%. The amount of leaching heavy metals in melting slag were both under corresponding standard limits using either national toxicity leaching methods or TCLP of EPA.
 ...
PMID:[Influence of additive on characteristic of slag during the process of melting fly ash from municipal solid waste incinerator]. 1732 42

Chromated copper arsenate (CCA)-treated wood is a preservative treated wood construction product that grew in use in the 1970s for both residential and industrial applications. Although some countries have banned the use of the product for some applications, others have not, and the product continues to enter the waste stream from construction, demolition and remodeling projects. CCA-treated wood as a solid waste is managed in various ways throughout the world. In the US, CCA-treated wood is disposed primarily within landfills; however some of the wood is combusted in waste-to-energy (WTE) facilities. In other countries, the predominant disposal option for wood, sometimes including CCA-treated wood, is combustion for the production of energy. This paper presents an estimate of the quantity of CCA-treated wood entering the disposal stream in the US, as well as an examination of the trade-offs between landfilling and WTE combustion of CCA-treated wood through a life-cycle assessment and decision support tool (MSW DST). Based upon production statistics, the estimated life span and the phaseout of CCA-treated wood, recent disposal projections estimate the peak US disposal rate to occur in 2008, at 9.7 million m(3). CCA-treated wood, when disposed with construction and demolition (C&D) debris and municipal solid waste (MSW), has been found to increase arsenic and chromium concentrations in leachate. For this reason, and because MSW landfills are lined, MSW landfills have been recommended as a preferred disposal option over unlined C&D debris landfills. Between landfilling and WTE for the same mass of CCA-treated wood, WTE is more expensive (nearly twice the cost), but when operated in accordance with US Environmental Protection Agency (US EPA) regulations, it produces energy and does not emit fossil carbon emissions. If the wood is managed via WTE, less landfill area is required, which could be an influential trade-off in some countries. Although metals are concentrated in the ash in the WTE scenario, the MSW landfill scenario releases a greater amount of arsenic from leachate in a more dilute form. The WTE scenario releases more chromium from the ash on an annual basis. The WTE facility and subsequent ash disposal greatly concentrates the chromium, often oxidizing it to the more toxic and mobile Cr(VI) form. Elevated arsenic and chromium concentrations in the ash leachate may increase leachate management costs.
 ...
PMID:CCA-treated wood disposed in landfills and life-cycle trade-offs with waste-to-energy and MSW landfill disposal. 1741 10

A cancrinite-type zeolite was synthesized from Class C fly ash by molten-salt method. The product (ZFA) was used as the adsorbent for the arsenate removal from water. The adsorption equilibriums of arsenate are investigated on various adsorbents. ZFA showed a higher adsorption capacity (5.1 mg g(-1)) than activated carbon (4.0 mg g(-1)), silica gel (0.46 mg g(-1)), zeolite NaY (1.4 mg g(-1)), and zeolite 5A (4.1 mg g(-1)). The relatively higher adsorption capacity of ZFA than zeolite NaY and 5A was attributed to the low Si/Al ratio and the mesoporous secondary pore structure of ZFA. However, it was found that the adsorption capacity of zeolites were generally lower than activated alumina (16.6 mg g(-1)), which is ascribed to the small pores in zeolite frameworks. The adsorption capacity of ZFA was significantly improved after loaded by alumina via a wet-impregnation method. The modified ZFA (ZFA-Al(50)) with the optimum alumina loading showed an adsorption capacity of 34.5 mg g(-1), which was 2.1 times higher than activated alumina. The Toxicity Characteristic Leaching Procedure (TCLP) leachability tests indicated that the spent ZFA and alumina-modified ZFA complied with the EPA regulations for safe disposal.
 ...
PMID:Arsenate removal from water by an alumina-modified zeolite recovered from fly ash. 1745 74

A European standard for the determination of Cr(vi) in solid material has been elaborated in the framework of an international co-operation and finally validated in the course of an interlaboratory comparison. The procedure is based on the alkaline digestion prescribed by EPA method 3060A followed by ion chromatography and determines an operationally defined content of Cr(vi), including water-soluble and insoluble chromates. A preliminary robustness study was carried out in order to compare different extraction methodologies and to study the equivalency of different analytical methods for the determination of Cr(vi) in alkaline extracts of soil and waste materials. During an interlaboratory validation trial with 19 European laboratories a set of 4 samples (2 soil and 2 waste samples) was analysed to determine performance characteristics for different combinations of digestion and detection methods. With the procedures prescribed by the new European standard (EN 15192) acceptable results were obtained for both soil samples and one of the waste samples (sludge). However, for the second waste sample (fly ash) a large deviation in analytical results was observed. This indicates that particularly for waste materials a possible occurrence of strong matrix effects has to be considered and supplementary quality control data are needed in order to assess the validity of analytical results. The accuracy of the determination of Cr(vi) in solid matrices remains a challenging field in terms of maximum extraction efficiency and minimum species interconversion.
 ...
PMID:Validation of a European standard for the determination of hexavalent chromium in solid material. 1760 96

This paper presents the results of the lixiviation of metals from different mixtures of fly and bottom ashes that have been stabilized and solidified in clays used in the manufacture of bricks. The ashes used for this study were obtained from a Hoffmann-type brick furnace adapted for the incineration of municipal solid waste during the manufacturing of ceramic bricks. The ashes were stabilized in clay in different proportions of clay:ash mix (99:1, 95:5, 90:10, 80:20 and 60:40). Such mixes were used to manufacture bricks that were calcined at a temperature ranging from 50 to 1100 degrees C. The clay, ashes and manufactured bricks were characterized using X-ray diffraction, fluorescent X-ray, thermogravimetry, differential thermal analysis, atomic absorption spectroscopy and scanning electronic microscopy. In addition, toxicity characteristic leaching procedure lixiviation tests were performed according to the EPA 1311 method for the determination of heavy metals. The results showed an affinity between clay and ash, and also that the bricks manufactured with these mixtures present low lixiviation levels. The tests also showed the highest decrease in the concentration of arsenic, nickel, chromium, zinc and silver for 99:1 mixtures. The 95:5 mixture was found to be the most favourable for the stabilization (greater concentration decrease) of lead and cadmium. Selenium was the metal with the lowest concentration change whereas arsenic, nickel, chromium, zinc and cadmium showed the greatest concentration change in all mixtures, with the exception of cadmium in the mixture 99:1.
 ...
PMID:Stabilization/solidification of ashes in clays used in the manufacturing of ceramic bricks. 1787 62

A method of ultrasound-assisted digestion followed by inductively coupled plasma optical emission spectrometry (ICP-OES) used for the determination of toxic element concentrations (arsenic, barium, cobalt, copper, lead, nickel, strontium, vanadium and zinc) in ash samples was developed. All the measurements were performed in robust plasma conditions which were tested by measuring the Mg(II) 280.270 nm/Mg(I) 285.213 nm line intensity ratios. The highest line intensity ratios were observed when a nebulizer gas flow of 0.6 L min(-1), auxiliary gas flow of 0.2 L min(-1) and plasma power of 1400 W were used for radially viewed plasma. The analysis of SRM 1633b showed that the ultrasound-assisted method developed is highly comparable with the microwave digestion method standardized by the United States Environmental Protection Agency (EPA-3052). The ultrasound-assisted digestion with a digestion solution of aqua regia and hydrofluoric acid (HF) resulted in recovery rates of over 81%. One exception is arsenic which resulted in recoveries of about 60% only; however, it could be digested with good recovery (>90%) using a digestion solution of 5 mL of water and 5 mL of aqua regia. The major advantage of the ultrasound-assisted digestion over microwave digestion is the high treatment rate (30 samples simultaneously with a sonication time of 18 min).
 ...
PMID:An ultrasound-assisted digestion method for the determination of toxic element concentrations in ash samples by inductively coupled plasma optical emission spectrometry. 1793 4

The aim of this study was to compare the regrowth potentials of wastewater sludges dried in two pilot-scale drying processes namely, Open-Sun Sludge Drying Bed (OSDB) and Covered Sludge Drying Bed (CSDB). Quicklime and/or coal fly ash were added to raw sludge samples prior to drying processes in order to enhance bacterial inactivation. Following three drying cycles (March-April, June-July and August-October), sludge samples were taken from the beds for the regrowth experiments. Addition of alkaline materials prevented the regrowth of faecal coliforms in all rewetted samples except for the samples obtained after the rainfall events in OSDB. Rewetting of these samples in the regrowth experiments increased faecal coliform numbers by 3.5-7 log units. In contradiction, the observed bacterial numbers in rewetted alkaline samples from CSDB were below the EPA Class B criterion (2 million MPN g(-1) dry sludge). The combination of additional heat from solar collectors, protection from the rain and the unfavourable living conditions owing to alkaline materials appeared to inactivate bacteria more effectively in CSDB and hence eliminated regrowth potential more efficiently.
 ...
PMID:Bacterial regrowth potential in alkaline sludges from open-sun and covered sludge drying beds. 1797 May 17

This paper describes the solidification and stabilization of electroplating sludge treated with a high-performance binder made from portland type-I cement, municipal solid waste incineration fly ash, and lighting phosphor powder (called as cement-fly ash-phosphor binder, CFP). The highest 28-day unconfined compressive strength of the CFP-treated paste was 816 kg/cm(2) at a ratio of cement to fly ash to lighting phosphor powder of 90:5:5; the strength of this composition also fulfilled the requirement of a high-strength concrete (>460 kg/cm(2) at 28 days). The CFP-stabilized sludge paste samples passed the Taiwanese EPA toxicity characteristic leaching procedure test and, therefore, could be used either as a building material or as a controlled low-strength material, depending on the sludge-to-CFP binder ratio.
 ...
PMID:Ternary blends containing demercurated lighting phosphor and MSWI fly ash as high-performance binders for stabilizing and recycling electroplating sludge. 1820 38

This study analyzed the effects of different concentrations of flaxseed oil (FO) on the proximate composition and the contents of alpha-linolenic acid (LNA, 18:3n-3), eicosapentaenoic (EPA, 20:5n-3), and docosahexaenoic (DHA, 22:6n-3) fatty acids in the liver of cultured Nile tilapia (Oreochromis niloticus). During the five-month culture period, tilapias were given diets with incremental concentrations of FO (0.00%; 1.25%; 2.50%; 3.75%, and 5.00%) as a replacement of sunflower oil (control). There was no significant difference in moisture and ash content in the liver between treatments. Protein values ranged from 12.1% (treatment II) to 13.9% (treatment V) and total lipids ranged from 5.6% (treatment V) to 7.2% (treatment II). There was no significant difference between most treatments. Fatty acid methyl esters (FAMEs) were quantitatively analyzed by capillary gas chromatography against a C(23:0), internal standard. Variations in concentrations (in mg g(-1) of total lipids) of fatty acids between treatment I and treatment V ranged from 4.2 to 51.2 (LNA), from 0.2 to 2.3 (EPA), and from 10.6 to 56.2 (DHA), respectively. This experiment demonstrated that increasing amounts of LNA in feed may markedly increase the amounts of LNA, EPA, and DHA in the liver of Nile tilapia.
 ...
PMID:Effect of flaxseed oil in diet on fatty acid composition in the liver of Nile tilapia (Oreochromis niloticus). 1827 6


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>