Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0085631 (agitation)
 12,064 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The aim of the present study was to obtain cross-linked calcium-gellan beads containing diclofenac sodium as model drug, using full 3(3) factorial design. Drug quantity, pH of cross-linking solution, and speed of agitation were selected as variables for factorial design. The resultant beads were evaluated by scanning electron microscopy (SEM), percent yield, entrapment efficiency, micromeritic properties, swelling and drug release studies. The drug-loaded beads were spherical with size range of 0.85-1.8 mm. Percent yield and entrapment efficiency of various batches were in the range of 86.48-98.28% w/w and 72.52-92.74% w/w, respectively. Calcium-gellan beads containing diclofenac sodium showed pH-dependent swelling and drug release properties. Swelling and drug release were significantly higher in pH 7.4 phosphate buffer than 0.1N HCl. The swelling ratio for beads was up to 22 and 3 for phosphate buffer and 0.1N HCl, respectively. Cumulative diclofenac sodium release from calcium-gellan beads was 12-35% in 0.1N HCl within 2 h, whereas complete drug release was observed within 3-4 h in pH 7.4 phosphate buffer.
 ...
PMID:Study of formulation variables on properties of drug-gellan beads by factorial design. 1655 36

In this study, immobilized Pseudomonas aeruginosa PU21 beads were used as an adsorbent for lead(II). Different weight percentages of chitosan were added to polyethylene glycol (PEG, 0.5 wt.% in aqueous solution) and alginate (18 wt.% in aqueous solution), and then blended or cross-linked using different concentrations of epichlorohydrin (ECH) to prepare beads of different sizes and increased mechanical strength. Before blending or cross-linking, different weight percentages of P. aeruginosa PU21 were added to increase lead(II) adsorption. Subsequently the optimized bead composition (concentration of ECH, percentages of chitosan and P. aeruginosa PU21) and the optimum adsorption conditions (agitation rate and pH in the aqueous solution) were ascertained. Finally, the optimized beads adsorbing lead(II) were regenerated by 0.1M aqueous HCl solutions and the most effective desorption agitation rate was ascertained. The results indicate that the reuse of immobilized P. aeruginosa PU21 beads was feasible. In addition, the equilibrium adsorption, kinetics, changes in the thermodynamic properties of adsorption of lead(II) on optimized beads were also investigated.
 ...
PMID:Adsorption and recovery of lead(II) from aqueous solutions by immobilized Pseudomonas Aeruginosa PU21 beads. 1681 63

Tamarind seed, a household waste from the kitchen is used for the sorptive removal of fluoride from synthetic aqueous solution as well as from field water samples. Batch sorptive defluoridation was conducted under variable experimental conditions such as pH, agitation time, initial fluoride concentration, particle size and sorbent dose. Maximum defluoridation was achieved at pH 7.0. Defluoridation capacity decreases with increase in temperature and particle size. Further, defluoridation follows first order kinetics and Langmuir adsorption isotherm. Desorption was carried out with 0.1 N HCl and is 90 per cent. The surface and sorption characteristics were analysed using FTIR and SEM techniques. All these results indicate the involvement of energetic forces such as coulombic interaction in sorption. For domestic and industrial applications, defluoridation with 100% achievement and subsequent regeneration of adsorbent was performed with a household water filter and fixed bed column respectively.
 ...
PMID:Studies on defluoridation of water by tamarind seed, an unconventional biosorbent. 1717 16

Floating dosage forms enable the sustained delivery of drugs in the gastro-intestinal tract. In this study, a type of multi-unit floating gel bead was synthesized with calcium alginate, sunflower oil, and a drug of interest through an emulsification/gelation process. The alginate beads with oil addition were able to continuously float over the medium for 24h under constant agitation while the non-oily beads could not. Three kinds of drugs with different hydrophilicities, ibuprofen, niacinamide and metoclopramide HCl, were tested in the study. The hydrophobic drug ibuprofen was released in a sustained manner for 24h, due to the oil partitioning. With suitable modification, the beads were able to also release the hydrophilic drugs, niacinamide and metoclopramide HCl, for a similar duration. Therefore a floating dosage form that is able to sustain release both hydrophobic and hydrophilic drugs within its extended gastric retention time has been developed.
 ...
PMID:Sustained release of hydrophobic and hydrophilic drugs from a floating dosage form. 1719 55

The present work has for the first time compared extraction of basic analytes across a supported liquid membrane (SLM) based on (1) passive diffusion in a pH gradient sustained over the SLM and (2) electrokinetic migration in an electrical field sustained over the SLM. For the passive diffusion experiments, performed as liquid-phase microextraction (LPME), five basic drugs were extracted under strong agitation from alkaline samples (10mM NaOH), through 2-nitrophenyl octylether immobilized in the pores of a porous hollow fibre of polypropylene (SLM), and into 25 microl of 10mM HCl as the acceptor solution. The experiments based on electrokinetic migration, performed as electro membrane isolation (EMI), were conducted under strong agitation from acidic samples (10mM HCl), through the same SLM as in LPME, and into 25 microl of 10mM HCl as the acceptor solution. Whereas LPME relied on diffusion and to some extent also convection as the principal mechanisms of mass transfer, mass transfer in EMI also included a strong contribution from electrokinetic migration. Thus, extraction kinetics was improved by a factor between 6 and 17 utilizing EMI instead of LPME. This major difference in terms of speed was especially pronounced from small sample volumes (150 microl), and suggest that EMI may be a very interesting future concept for miniaturized sample preparation. In addition to improved extraction kinetics, extraction rates were strongly compound dependent in EMI, opening the possibility to control the extraction selectivity by the extraction time.
 ...
PMID:Microextraction across supported liquid membranes forced by pH gradients and electrical fields. 1752 60

Coir pith was chemically modified for the adsorption of cobalt(II) ions from aqueous solution. Chemical modification was done by esterification using succinic anhydride followed by activation with NaHCO(3) in order to improve the adsorption of Co(II). Adsorptive removal of Co(II) from aqueous solution onto modified coir pith was evaluated in batch studies under varying conditions of agitation time and metal ion concentration to assess the kinetic and equilibrium parameters. A pseudo-second-order kinetic model fitted well for the sorption of Co(II) onto modified coir pith. Sorption kinetics showed that the loading of Co(II) by this material was quite fast under ambient conditions. The Langmuir and Freundlich equilibrium isotherm models provided excellent fits for the adsorption data, with R(2) of 0.99 and 0.98, respectively. After esterification, the maximum Co(II) sorption loading Q(0); was greatly improved. It is evident that chemically modified adsorbent exhibits better Co(II) removal capability than raw adsorbent suggesting that surface modification of the adsorbent generates more adsorption sites on its solid surface for metal adsorption. A complete recovery of the adsorbed metal ions from the spent adsorbent was achieved by using 1.0N HCl.
 ...
PMID:Esterified coir pith as an adsorbent for the removal of Co(II) from aqueous solution. 1761 Nov 4

The present study reports the optimization and validation of a dissolution test for selegiline.HCl tablets using a new high-performance liquid chromatographic (HPLC) method. Rapid separation of the analyte from sample matrix was achieved in less than 60s using a Cromolith RP-18e monolithic column using UV detection at 220 nm. Thorough validation of the assay based on pre-defined criteria included linearity, LOD/LOQ, accuracy, precision, selectivity and ruggedness. The dissolution test was optimized in terms of dissolution medium, basket (type I)/paddle (type II) agitation and rotation speed. Its ruggedness was also validated. The presented analytical and dissolution procedures are currently being applied in the quality and stability control of Cosmopril tablets (5mg/tablet selegiline.HCl, Cosmopharm Ltd., Korinthos, Greece).
 ...
PMID:Optimization and validation of a dissolution test for selegiline hydrochloride tablets by a novel rapid HPLC assay using a monolithic stationary phase. 1817 60

In the present study, we developed a reference material (RM) using authentic hair samples for the determination of methamphetamine (MA) and its main metabolite, amphetamine (AP) in human hair. MA abusers' hair samples were collected, homogenized and finally bottled. The concentration of each bottle was determined using two extraction methods, agitation with 1% HCl in methanol at 38 degrees C and ultrasonication with methanol/5M HCl (20:1), followed by gas chromatography/mass spectrometry (GC-MS) after derivatization with trifluoroacetic anhydride (TFAA). Both analytical procedures were fully validated and their extraction efficiency was compared. The homogeneity of analytes was evaluated and their property values were determined with their uncertainties. The two methods were acceptable to analyze MA and AP in human hair through the validation and comparative studies using spiked and authentic hair samples as well as NIST SRM 2379 certified reference material. Satisfying homogeneity was reached for MA and AP in the prepared RM. Finally, a human hair RM containing MA and AP is prepared at the level of 7.64+/-1.24 and 0.54+/-0.07 ng/mg, respectively. This material can be useful in forensic laboratories for internal quality control and external quality assurance.
 ...
PMID:Development of a reference material using methamphetamine abusers' hair samples for the determination of methamphetamine and amphetamine in hair. 1828 47

The adsorption of humic acid on crosslinked chitosan-epichlorohydrin (chitosan-ECH) beads was investigated. Chitosan-ECH beads were characterized by Fourier transform infrared spectroscopy (FTIR), surface area and pore size analyses, and scanning electron microscopy (SEM). Batch adsorption experiments were carried out and optimum humic acid adsorption on chitosan-ECH beads occurred at pH 6.0, agitation rate of 300 rpm and contact time of 50 min. Adsorption equilibrium isotherms were analyzed by Langmuir and Freundlich models. Freundlich model was found to show the best fit for experimental data while the maximum adsorption capacity determined from Langmuir model was 44.84 mg g(-1). The adsorption of humic acid on chitosan-ECH beads was best described with pseudo-first-order kinetic model. For desorption study, more than 60% of humic acid could be desorbed from the adsorbent using 1.0M HCl for 180 min.
 ...
PMID:Adsorption of humic acid from aqueous solutions on crosslinked chitosan-epichlorohydrin beads: kinetics and isotherm studies. 1835 5

A method termed as liquid-liquid-liquid microextraction was utilized to extract chlorophenols from water. The extracted chlorophenols, present in anionic form, were then separated, identified, and quantitated by ion-pair high-performance liquid chromatography with photodiode array detection (HPLC/DAD). For trace chlorophenol determination using HPLC/DAD, the chlorophenolate anion provides a better ultraviolet spectrum for quantitative and qualitative analyses than does uncharged chlorophenol. This is due to the auxochromic effect of the phenolate anion. In the study, experimental conditions such as organic phase identity, acceptor phase volume, sample agitation, extraction time, acceptor phase NaOH concentration, donor phase HCl concentration, salt addition, and UV absorption wavelength were optimized. Relative standard deviations (RSD, 2.3-5.4%), coefficients of determination (r2 0.9994-0.9999), and detection limits (0.049-0.081 ng mL(-1)) of the proposed method were investigated under the selected conditions. The method was successfully applied to analyses of reservoir and tap water samples, and the relative recoveries of chlorophenols from the spiked reservoir and tap water samples were 94.1-100.4% and 87.8-101.2%, respectively. The proposed method is capable of identifying and quantitating each analyte to 0.5 ng mL(-1), confirming the HPLC/DAD technique to be quite robust for monitoring trace levels of chlorophenols in water samples.
 ...
PMID:Application of liquid-liquid-liquid microextraction and ion-pair liquid chromatography coupled with photodiode array detection for the determination of chlorophenols in water. 1842 Feb 16


<< Previous 1 2 3 4 5 6 7 8 Next >>