Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0040822 (tremor)
 18,428 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

An inductively coupled plasma atomic emission spectrometric method for the determination of trace amounts of cadmium after extraction of the metal into isobutyl methyl ketone containing 1,5-bis(di-2-pyridylmethylene) thiocarbonohydrazide is described. The optimum extraction conditions were evaluated from a critical study of the effects of pH, concentration of extractant, shaking time and ionic strength. The detection limit for cadmium is 0.1 ng ml-1 and the calibration is linear from 0.2 to 140 ng ml-1. The relative standard deviation for ten replicate measurements is 2.9% for 2 ng ml-1 of cadmium. Results from the analysis of some certified biological reference materials are given.
 ...
PMID:Determination of cadmium in biological samples by inductively coupled plasma atomic emission spectrometry after extraction with 1,5-bis(di-2-pyridylmethylene) thiocarbonohydrazide. 148 97

We have performed several cross-sectional epidemiological surveys among workers exposed to cadmium, mercury vapour or manganese in order to assess : their early biological or functional effects; the biological tests allowing an assessment of the amount of metal absorbed or stored in the body; the acceptable exposure levels. Studies have also been carried out among persons exposed to inorganic arsenic in order to define its inactivation mechanism and to develop a biological test of exposure. The kidney is the main critical organ following long-term exposure to cadmium. To prevent the occurrence of renal changes in the majority of male workers exposed to cadmium, its concentration in renal cortex should not exceed 215 micrograms/g (wet weight), and that in urine : 10 micrograms/g creatinine. A blood cadmium level of 1 microgram/100 ml has been suggested as maximum tolerable level for long-term exposure. Prolonged exposure to mercury vapour may lead to renal and neurological disturbances. The preclinical signs of nephrotoxicity are correlated with the amount of mercury absorbed which may be assessed by monitoring the mercury level in urine. The neurotoxic effects (particularly tremor) are mainly related to the integrated exposure (duration and intensity). A maximal permissible level of 50 micrograms Hg/g urinary creatinine is proposed to prevent the occurrence of these toxic effects. An exposure to manganese dust for 7 years on the average at a level below the maximum allowable airborne concentration (5 mg/m3) recommended by the ACGIH in the USA may still lead to a slight reduction in psychomotor and spirometric performances and interfere with calcium metabolism.(ABSTRACT TRUNCATED AT 250 WORDS)
 ...
PMID:[Biological aspects of occupational exposure to cadmium and several other metals]. 382 21

The ionic requirements for electro-responsiveness in thalamic neurones were studied using in vitro slice preparations of the guinea-pig diencephalon. Analysis of the current-voltage relationship in these neurones revealed delayed and anomalous rectification. Substitution of Na+ with choline in the bath or addition of tetrodotoxin (TTX) abolished the fast spikes and the plateau potentials, described in the accompanying paper. Ca2+ conductance blockage with Co2+, Cd2+ or Mn2+, or replacement of Ca2+ by Mg2+ abolished the low-threshold spikes (l.t.s.). Substitution with Ba2+ did not significantly increase the duration of the l.t.s., suggesting that under normal conditions the falling phase of this response is brought about by inactivation of the Ca2+ conductance. The after-hyperpolarization (a.h.p.) following fast spikes was markedly reduced in amplitude and duration by bath application of Cd2+, Co2+ or Mn2+, indicating that a large component of this response is generated by a Ca2+-dependent K+ conductance (gK[Ca]). Following hyperpolarizing current pulses, the membrane potential showed a delayed return to base line. This delay is produced by a transient K+ conductance as it can be modified by changing the drive force for K+. Presumptive intra-dendritic recording demonstrated high-threshold Ca2+ spikes (h.t.s.s.) which activate a gK[Ca]. Such h.t.s.s. were also seen at the somatic level when K+ conductance was blocked with 4-aminopyridine. It is proposed that the intrinsic biophysical properties of thalamic neurones allow them to serve as relay systems and as single cell oscillators at two distinct frequencies, 9-10 and 5-6 Hz. These frequencies coincide with the alpha and theta rhythms of the e.e.g. and, in the latter case, with the frequency of Parkinson's tremor.
 ...
PMID:Ionic basis for the electro-responsiveness and oscillatory properties of guinea-pig thalamic neurones in vitro. 673 93

A clear picture of the mechanisms of action of the anti-epileptic agent gabapentin is far from being accomplished. We have analyzed the effects of gabapentin on ligand- and voltage-gated currents in isolated adult rat cortical neurons. Gabapentin failed to modify glutamate currents and produced a slight reduction of GABA responses. Negligible inhibition of sodium, but consistent inhibition of high-voltage-activated calcium conductance was promoted by gabapentin. In addition, gabapentin reduced calcium current sensitivity to dihydropyridine agonist and antagonists. Interestingly, gabapentin also decreased a not-inactivating, cadmium-sensitive, potassium current. These unconventional effects might underlie its efficacy in a variety of diseases which involve periodic discharge patterns as neuropathic pain or essential tremor.
 ...
PMID:The effects of gabapentin on different ligand- and voltage-gated currents in isolated cortical neurons. 1124 35

The extraction rates of cadmium(II) and zinc(II) with dithizone (H2dz) in the presence of nitrilotriacetic acid (NTA) were measured, and the possible kinetic separation of cadmium(II) from zinc(II) was investigated. Upon the addition of NTA, the difference in the extraction rate between cadmium(II) and zinc(II) became large. Based on the observed rate constant under the condition [NTA] = 1 x 10(-2) mol dm-3, [H2dz]org = 1 x 10(-3) mol dm-3, and pH = 7.0, the shaking time required for the quantitative separation of cadmium(II) from zinc(II) was calculated to be between 326 and 995 s. The experimental results agreed with the prediction, and the quantitative separation of cadmium(II) from zinc(II) was performed within the above-mentioned range of shaking times.
 ...
PMID:Kinetically controlled separation of cadmium(II) from zinc(II) with dithizone in the presence of nitrilotriacetic acid. 1175 13

A basic investigation on the removal of cadmium(II) ions from aqueous solutions by dead Sargassum sp. was conducted in batch conditions. The influence of different experimental parameters; initial pH, shaking rate, sorption time, temperature and initial concentrations of cadmium ions on cadmium uptake was evaluated. Results indicated that cadmium uptake could be described by the Langmuir adsorption model, being the monolayer capacity negatively affected with an increase in temperature. Analogously, the adsorption equilibrium constant decreased with increasing temperature. The kinetics of the adsorption process followed a second-order adsorption, with characteristic constants increasing with increasing temperature. Activation energy of biosorption could be calculated as equal to 10 kcal/mol. The biomass used proved to be suitable for removal of cadmium from dilute solutions. Its maximum uptake capacity was 120 mg/g. It can be considered an optimal result when compared to conventional adsorbing materials. Thus Sargassum sp. has great potential for removing cadmium ions especially when concentration of this metal is low in samples such as wastewater streams.
 ...
PMID:Kinetic modeling and equilibrium studies during cadmium biosorption by dead Sargassum sp. biomass. 1506 29

Bentonite clay has been used for the adsorption of Fe(II) from aqueous solutions over a concentration range of 80-200 mg/l, shaking time of 1-60 min, adsorbent dosage from 0.02 to 2 g and pH of 3. The process of uptake follows both the Langmuir and Freundlich isotherm models and also the first-order kinetics. The maximum removal (>98%) was observed at pH of 3 with initial concentration of 100 mg/l and 0.5 g of bentonite. The efficiency of Fe(II) removal was also tested using wastewater from a galvanized pipe manufacturing industry. More than 90% of Fe(II) can be effectively removed from the wastewater by using 2.0 g of the bentonite. The effect of cations (i.e. zinc, manganese, lead, cadmium, nickel, cobalt, chromium and copper) on the removal of Fe(II) was studied in the concentration range of 10-500 mg/l. All the added cations reduced the adsorption of Fe(II) at high concentrations except Zn. Column studies have also been carried out using a certain concentration of wastewater. More than 99% recovery has been achieved by using 5 g of the bentonite with 3M nitric acid solution.
 ...
PMID:Removal of Fe(II) from the wastewater of a galvanized pipe manufacturing industry by adsorption onto bentonite clay. 1553 87

The effect of surfactant alkyl chain length on soil Cd desorption was studied using nonionic surfactants of polyethylene oxide (PEO) of PEO chain lengths of 7.5 (Triton X-114), 9.5 (Triton X-100), 30 (Triton X-305), or 40 units (Triton X-405) in combination with the I- ligand. Triplicate 1 g soil samples were equilibrated with 15 ml of surfactant-ligand mixture, at concentrations of 0.025, 0.50 or 0.10, and 0.0, 0.168 or 0.336 mol/l, respectively. After shaking the samples for 24 h, the supernatant fraction was analyzed for Cd content to determine the percent of Cd desorbed from the soil. After five successive washings, 53%, 40% and 25% of Cd had been desorbed by 0.025, 0.050 or 0.10 mol/l of Triton X-114, respectively, in the presence of 0.336 mol/l of I-, whereas with the same conditions, Triton X-100 desorbed 61%, 57% and 56% Cd and either Triton X-305 or Triton X-405 desorbed 51, 40 and 14 to 16% Cd. The most efficient Cd desorption was obtained using 0.025 mol/l Triton X-100 in admixture with 0.336 mol/l I-. Increased surfactant concentration was detrimental to Cd desorption consistent with a process that blocked ligand access to the soil particle surface. After 5 washings,the cumulative cadmium desorption decreased with increasing surfactant alkyl chain length, indicating that the metal-ligand complexes are preferably stabilized by the micelles' hydrophobic octyl phenyl (OP) group rather than by the hydrophilic PEO group. In the absence of ligand, the surfactants alone desorbed less than 1% Cd from the contaminated soil, suggesting that the ligand, rather than the surfactant, extracts the metal, to be subsequently stabilized within the surfactant micelles.
 ...
PMID:Effect of surfactant alkyl chain length on soil cadmium desorption using surfactant/ligand systems. 1562 Nov 86

A sensitive spectrophotometric method for the determination of freely dissolved copper concentrations in aqueous samples after preconcentration with hollow fiber membrane extraction has been developed. The method is based on the equilibrium sampling through a selective membrane into an acceptor solution containing 4-(pyridyl-2-azo)resorcinol (PAR), which serves as stripping agent and metal indicator. Negligible extraction of interferences and equilibrium enrichment of copper allowed for selective spectrophotometric determination of the Cu-PAR complex. Some important extraction parameters such as acceptor composition, shaking, equilibrium time, and sample volume were studied. The optimized methodology showed good linearity in the range of 5-100 microg/L, an enrichment factor of 93, good repeatability and reproducibility (RSDs < 6%, n = 6), and a detection limit of 4 microg/L. The cationic metals Ni2+, C(2+, Cd2+, Fe3+, Pb2+, Zn2+, and Mn2+ were shown not to interfere with the measurement of Cu2+. Measurements on samples containing mixtures of various ligands and cations were in good agreement with theoretically calculated concentrations, and the method was also applied to environmental samples. The developed technique requires less labor and less sophisticated equipment than conventional methods typically based on atomic absorption spectrometry or ICP.
 ...
PMID:Equilibrium sampling through membranes of freely dissolved copper concentrations with selective hollow fiber membranes and the spectrophotometric detection of a metal stripping agent. 1631 67

High N-acetyl-L-aspartate (NAA) levels prevail as a free amino acid in vertebrate brains. NAA is synthesized from aspartate and acetyl Co-A, or is liberated by the hydrolyzation of N-acetyl-L-aspartyl-glutamate in mitochondria before being metabolized by aspartoacylase to aspartate and acetate in the cytosol of glial cells. The tremor rat (tm/tm), derived from a Kyoto-Wistar colony, shows absence-like seizures with 5- to 7-Hz spike-wave-like complexes in cortical and hippocampal electroencephalograms (EEG). Genomic microdeletion was found within the aspartoacylase-encoding tm critical region, where an increase in the NAA level was noted. Intracerebroventricular NAA induced absence-like seizures, convulsive seizures or both in epileptic EEG of Wistar rats. NAA activated the hippocampal CA3 neurons of Wistar rats via the metabotropic glutamate receptor (mGluR) in acutely dissociated hippocampal CA3 neurons. The mechanism of NAA action on CA3 neurons was examined with intracellular recording of Wistar and tremor rat hippocampal slices to evaluate the role of NAA in neuronal networks. Bath application of NAA (10 microM-1mM) dose-dependently induced depolarization in CA3 neurons of Wistar and tremor rats. Cadmium (a Ca(2+) channel antagonist) and GDEE (an ionotropic glutamate receptor antagonist) did not affect NAA-induced depolarization. Although ACPD (a nonspecific mGluR agonist) induced similar depolarizations in CA3 neurons, MCPG (a mGluR antagonist) inhibited NAA-induced depolarization. These results suggest that NAA probably activates hippocampal CA3 neurons via the mGluR in a neuronal network.
 ...
PMID:N-acetyl-L-aspartate activates hippocampal CA3 neurons in rodent slice preparations. 1835 43


1 2 3 4 Next >>