Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0040822 (tremor)
 18,428 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The authors present a procedure of concurrent identification and quantification of amphetamine and metamphetamine in human hair. The method involves rinsing of the hair (distilled water 55 degrees C, 0.1 M hydrochloric acid, distilled water to neutral reaction, methanol) drying in air, homogenization by cutting (1-2 mm long), alkaline hydrolysis (20 mg hair, 1 ml 1 M sodium hydroxide, 55 degrees C, 120 min.), neutralization with 1 M hydrochloric acid to pH = 7, extracting benzoylation with 2,3,4,5,6-pentafluorobenzoyl chloride (0.3 ml 1 M sodium hydroxide, 4 ml cyclohexane, 30 ul cyclohexylamine in cyclohexane of a concentration of 20 ng/ul--internal standard, 50 ul aqueous solution of triethylamine hydrochloride concentration of 100 mg/ml--reaction catalyst and 10 ul of derivation agent 2,3,4,5,6-pentafluorobenzoyl chloride dilution 1:10, shaking for 5 mins. by hand and leaving to stand for 10 mins.), centrifugation (5 mins., 3000 rotations/min.), collection of 2 ml cyclohexane layer, its evaporation at 40 degrees C in nitrogen atmosphere and dilution with 100 ul cyclohexane. The derivated extract was subjected to analysis by the GC-MS method. The procedure was used for segmentation analysis of hair of two subjects abusing metamphetamine for prolonged periods. The revealed concentrations varied within the range of 0.99-5.25 mg/kg metamphetamine and 0.13-0.73 mg/kg amphetamine.
 ...
PMID:[Determination of amphetamine and methamphetamine in human hair using gas chromatography/mass spectrometry]. 1091 34

The effects of some nutritional conditions, such as peptone concentration, feeding glucose as well as oxygen supply manner and ratio of C/N in batch culture, on the fermentative production of pyruvic acid by Torulopsis glabrata WSH-IP12 were investigated. In shaking-flask culture: (1) peptone of more than 20 g/L inhibited the accumulation of pyruvic acid; (2) production of pyruvic acid was increased from 23.5 g/L to 30.2 g/L by simply feeding glucose. In 5 L jar-fermentor batch culture: (1) high level of dissolved oxygen and (2) increasing the concentration of glucose and peptone proportionally with constant C/N ratio(26:1) improved the production of pyruvic acid. It was also found that, glucose consumption and pyruvic acid production almost stopped under the condition of nitrogen difficiency while recovered by adding peptone and (NH4)2SO4. By using ammonia water instead of potassium hydroxide for the control of pH, the cells kept stronger ability for synthesizing pyruvic acid within the whole process, 57.3 g/L pyruvic acid with the yield of 0.498 g/g was achieved at 55 h of fermentation.
 ...
PMID:[Effect of nutritional conditions on the fermentative production of pyruvic acid by Torulopsis glabrata]. 1097 33

A sensitive chemiluminescence-based method for the assay of ornithine decarboxylase (ODC) has been developed. This method, which permits the detection of putrescine (the product of ODC) at a picomolar range, can be used to determine ODC activity in cellular extracts. Extracts are incubated with ornithine and spotted onto p81 phosphocellulose paper strips. After drying, the papers are washed with ammonium hydroxide to remove contaminants, which may interfere with the assay. Putrescine is next eluted from the paper by shaking in an elution buffer containing magnesium sulfate. Partially purified hog kidney diamine oxidase is then used to oxidize putrescine in the eluate. The hydrogen peroxide formed during the oxidation is determined by chemiluminescence using luminol and peroxidase. This simple analytical method has the sensitivity of conventional assays based on the use of radioactive ornithine.
 ...
PMID:A luminescence-based test for determining ornithine decarboxylase activity. 1111 77

Monitoring the removal of carbonate from alkali metal hydroxide (MOH, M = K, Na) solutions with calcium oxide (CaO) was studied using a newly developed method for the determination of trace amounts of total carbonate (TC) in alkaline solutions based on a flow injection (FI) technique coupled with a gas diffusion system. The optimized conditions of the FI system were as follows: the flow rate of each carrier, reaction solution (H2SO4) and receptor solution (Cresol Red, pH 8.9) was 0.25 ml min(-1), the sample size was 0.1 ml and the concentration of H2SO4 in the reaction solution was 0.09 M. The limit of detection of TC by the proposed method was 4 x 10(-7) M. The removal efficiency of carbonate was affected by the amount of CaO added, the shaking time of the solutions and the concentration of MOH. For 1 M NaOH and KOH solution, the removal efficiency of carbonate was about 99% and the concentration of residual carbonate was 4 x 10(-5) and 1.2 X 10(-4) M, respectively, when the amount of CaO added was 2 g l(-1) and the shaking time was 16 h.
 ...
PMID:Monitoring the removal of carbonate from alkali metal hydroxide solutions using gas diffusion flow injection. 1199 72

The adsorption characteristics of As(V) and As(III) on titanium dioxide loaded Amberlite XAD-7 resin have been studied. The resin was prepared by impregnation of Ti(OC2H5)4 followed by hydrolysis with ammonium hydroxide. Batch adsorption experiments were carried out as a function of the pH, shaking time and the concentration of As(V) and As(III) ions. The resin showed a strong adsorption for As(V) from pH 1 to 5 and for As(III) from pH 5 to 10. The adsorption isotherm data for As(V) at pH 4 fitted well to a Langmuir equation with a binding constant of 59 dm3 mol(-1) and a capacity constant of 0.063 mmol g(-1). The data for As(III) at pH 7 also fitted well to a Langmuir equation with a binding constant of 5.4 dm3 mol(-1) and a capacity constant of 0.13 mmol g(-1). The effect of diverse ions on the adsorption of arsenic was also studied. Column adsorption experiments showed that the adsorption of As(III) is more favorable compared to As(V), due to both the faster adsorption and larger capacity for As(III) than As(V).
 ...
PMID:Adsorption characteristics of as(III) and as(V) with titanium dioxide loaded Amberlite XAD-7 resin. 1250 87

The proinflammatory cytokines tumor necrosis factor (TNFalpha), interleukin-1 (IL-1alpha), and interleukin-6 (IL-6) have been associated with various models of hippocampal damage. To examine their role in initiation of an acute hippocampal injury response, 21-day-old male CD-1 mice received an acute intraperitoneal (i.p.) injection of trimethyltin hydroxide (TMT; 2.0 mg/kg) to produce necrosis of dentate granule neurons, astrocyte, and microglia reactivity. Tremors and intermittent seizures were evident at 24 hr. Intercellular adhesion molecule-1 (ICAM-1), glial fibrillary acidic protein (GFAP), anti-apoptotic TNFalpha-inducible early response gene (A-20), macrophage inflammatory protein (MIP)-1alpha, TNFalpha, IL-1alpha, IL-6, and caspase 3 mRNA levels were significantly elevated. Pretreatment with the antioxidant, ebselen, decreased ICAM-1, A-20, and TNFbeta elevations. Pentoxifylline blocked elevations in A-20 and decreased elevations in GFAP mRNA levels. Neither prevented histopathology or behavioral effects. Intracisternal injection of TNFalpha-neutralizing antibody significantly inhibited both behavioral effects and histopathology. RNase protection assays showed that TMT-induced elevations in mRNA levels for ICAM-1, A-20, GFAP, MIP-1alpha, IL-1alpha, TNFalpha, TNFbeta, and caspase 3 were blocked by anti-TNFalpha. These data demonstrate a significant role for TNFalpha in an acute neuro-injury in the absence of contribution from infiltrating cells. The cerebellum shows limited if any damage after TMT; however, in combination with the i.c.v. injection, elevations were seen in GFAP and in EB-22, a murine acute-phase response gene homologous to the alpha (1)-antichymotrypsin gene. Elevations were similar for artificial cerebral spinal fluid and anti-IL-1alpha, and significantly increased with anti-TNFalpha, anti-IL-6, or the combination of antibodies. Responses seen in the cerebellum suggest synergistic interactions between the baseline state of the cell and manipulations in the cytokine environment. Data suggests a role for TNFalpha in the pathogenesis of hippocampal injury induced by TMT.
 ...
PMID:Differential modulation of hippocampal chemical-induced injury response by ebselen, pentoxifylline, and TNFalpha-, IL-1alpha-, and IL-6-neutralizing antibodies. 1289 37

The abilities of various extractants to recover four arsenic species [As(iii), As(v), dimethylarsinic acid (DMA), and monomethylarsonic acid (MMA)] from soils spiked with 20 micro g g(-1) As were investigated. The extractants were water, buffer solutions (citrate and ammonium dihydrogen phosphate), acidic solutions (phosphoric acid and acetic acid), a basic solution (sodium hydroxide) and household chemicals (vinegar and Coca Cola). Gentle shaking at room temperature with each extractant for 24 h gave different recoveries for the different arsenic species. With 0.1 M NaOH solution 46% As(iii), 53% DMA, 100% MMA and 84% As(v) were recovered. A rapid extraction procedure using a sonicator probe has been developed to obtain higher extraction efficiencies. Extracts of arsenic-spiked soil, SRM 2711 Montana soil and SRM 2709 San Joaquin soil were analyzed by HPLC-ICP-MS. In the SRM water extracts, DMA and MMA were identified in addition to inorganic arsenic. The solution detection limits (3s) were 0.1, 0.12, 0.13 and 0.15 ng mL(-1) for As(iii), DMA, MMA and As(v), respectively for HPLC-ICP-MS.
 ...
PMID:Extraction of arsenic species from spiked soils and standard reference materials. 1528 14

Flumioxazin adsorption kinetics were described using a Greenville sandy clay loam soil. Adsorption kinetics experiments showed that 72% of total herbicide was absorbed after 1 h of continuous shaking and continued to increase to 78% after 72 h. Flumioxazin adsorption was then tested on seven agriculturally important soils throughout the southern USA. Adsorption isotherms for all soils had K(f) (Freundlich distribution coefficient) values that ranged from 8.8 to 0.4, with many near 1.5. Soil organic matter content was the parameter most highly correlated with flumioxazin adsorption (r(2) = 0.95, P < 0.001). Sorption to clay minerals had K(f) values ranging from 50 for bentonite to 4.7 for kaolinite. However, normalizing K(f) for sorbent surface area revealed that aluminum hydroxide (gibbsite) possessed the greatest flumioxazin sorption per unit area. Sorption to anionic exchange resin (K(f) 676) was greater than cationic exchange resin (K(f) 42). Molecular model calculations were performed to elucidate why sorption was greater to anionic exchangers. These calculations indicated that a region of dense electronegativity exists on the 3-dione moiety of the molecule. This would lead to greater flumioxazin sorption by positively charged surface sites. Desorption isotherms from soil exhibited no effect of hysteresis. Desorption from clay minerals was very rapid and flumioxazin in solution was undetectable after three desorption steps. From these data it was concluded that flumioxazin can become readily available in soil solution with increase in soil water content.
 ...
PMID:Sorption and desorption of flumioxazin to soil, clay minerals and ion-exchange resin. 1559 72

The adsorption characteristics of sodium dodecyl sulfate (SDS), an anionic surfactant on neutral alumina were studied in detail. Alumina was found to be an efficient adsorbent for SDS and could be used for the removal of SDS from its highly concentrated (several thousand ppm) solution. The equilibrium time found was 2 h. Though the removal efficiency was low (approximately 65%) at neutral pH, but in slightly acidic condition and in the presence of NaCl the efficiency could be increased dramatically (up to >98%). The adsorption isotherm study showed distinct four regions. The effects of various other parameters such as adsorbent dose, time, and the presence of different ions (Cl-, NO3-, SO4(2-), and Fe3+), and nonionic surfactant on the SDS adsorption were also studied. It was observed that the adsorption capacity was increased due to the presence of these ions in general. After the adsorption of SDS on alumina, the surfactant-modified alumina (SMA) was used for the removal of crystal violet (CV), a well-known cationic dye from aquatic environment. The kinetic studies showed that 1 h shaking time was sufficient to achieve the equilibrium. The removal of CV followed the second order kinetics. Studies were conducted to see the effects of adsorbent dose and initial CV concentration on the removal of CV using SMA. The pH was maintained at 6.7+/-0.1. SMA was found to be very efficient, and approximately 99% efficiency could be achieved under optimised conditions for the removal of CV when present even at a high concentration (200 ppm). To test whether the removal of CV was possible from real water using SMA, the adsorption study was conducted using CV spiked samples using distilled water, tap water, and synthetically prepared wastewater. It was interesting to note that the removal efficiency was even better for tap water and much better for wastewater when compared to that using distilled water. Desorption of both SDS and CV from the SMA surface was possible using 1 M sodium hydroxide solutions.
 ...
PMID:Adsorption of anionic surfactant on alumina and reuse of the surfactant-modified alumina for the removal of crystal violet from aquatic environment. 1566 8

A method suitable for the determination of unmetabolized polycyclic aromatic hydrocarbons (PAHs) excreted at trace levels (ng/L) in human urine for the monitoring of exposure of the general population to PAH contamination was developed. PAHs were determined, after enrichment by solid-phase extraction on polyurethane foam (PUF) chips, by HPLC with fluorescence detection. Different parameters affecting analyte extraction to the PUF, including urine salting-out and organic additives, and optimization of conditions for clean-up and desorption have been investigated. Optimized conditions were 40 mL acidified urine sample, added with magnesium sulfate, tetrahydrofuran and a 2 cm3 PUF chip, and extracted by shaking at 30 rpm for 1 h at ambient temperature. Desorption was performed, after a clean-up step with diluted sodium hydroxide, using a small amount of diethyl ether. The recovery of PAH congeners from spiked urines was >90% in the 2-100 ng/L range; the detection limit was 0.1-0.5 ng/L, depending on the considered PAH congener; day-to-day precision, at 50 ng/L native PAH content, was CV = 10-20%. The proposed technique provides a simple, economical and effective procedure for the determination of trace amounts of unmetabolized PAHs excreted in human urine spot samples.
 ...
PMID:Polyurethane foam chips combined with liquid chromatography in the determination of unmetabolized polycyclic aromatic hydrocarbons excreted in human urine. 1650 84


<< Previous 1 2 3 4 5 Next >>