Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0037116 (silicosis)
 1,822 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The patterns of hepatic injury associated with various minerals were studied in seven patients. The subjects included one patient who was a sandblaster (silica by inhalation), one patient who was a dental laboratory technician (silica and chromium-cobalt alloy by inhalation), one patient with inhalational talcum powder abuse, and four chronic intravenous (IV) drug abusers (talc by IV injection). In all cases, the liver was examined by light and polarizing microscopy, and by scanning electron microscopy with energy-dispersive x-ray microanalysis. In the two patients with silica exposure, silica-containing sclerohyaline nodules were diffusely present in portal tracts and lobules. Both chromium-cobalt alloy and silica were present in the dental technician. In contrast, in all cases of talc exposure, aggregates of talc-laden macrophages were present in portal and centrilobular areas. Three IV drug abusers and the talcum powder abuser had histologic evidence of chronic hepatitis, most probably of viral etiology. We conclude that mineral type plays an important role in the pathogenesis and fibrogenesis of hepatic lesions. Compared with silica, talc primarily elicits a macrophage response without granuloma formation or fibrosis. Hepatic silicosis is a rare complication in dental laboratory technicians, and chromium-cobalt alloy may contribute to hepatic injury and fibrosis in this setting.
 ...
PMID:Mineral-associated hepatic injury: a report of seven cases with X-ray microanalysis. 174 95

Diagnosis of pneumoconiosis was made in 2 dental technicians presenting with interstitial lung disease. The occupational origin of inhaled dust was confirmed by mineralogic analyses, which disclosed mainly large amounts of chromium-cobalt-molybdenum particles originating from Vitallium prostheses, but also showed abrasives (silica and silicon carbide) and asbestos in 1 patient. The presence of Vitallium and its chemical stability in bronchoalveolar lavage and lung several years after cessation of exposure confirm the resistance of this alloy to corrosion by body fluids. This contrasts with the high solubility of cobalt described in cobalt or hard metal disease. We suggest that dental technician's pneumoconiosis is a complex pneumoconiosis distinct from silicosis, asbestosis, or hard metal disease and that Cr-Co-Mo alloys play a role in its pathogenesis.
 ...
PMID:Dental technician's pneumoconiosis. A report of two cases. 394 27

A case of generalised scleroderma is reported in a dental technician exposed to the risk of silicosis. A study of the occupational toxic risks in this patient showed pulmonary overload with silica and metallic particles composed of chromium, cobalt and tungsten. The job also involved the handling of vinyl chloride and its stable polymer. This chemical is known to give rise to scleroderma-type skin disease. The relationship between these occupational factors leads to a difficult physio-pathological problem and justifies preventative measures, even though they may be costly and demanding.
 ...
PMID:[Erasmus syndrome in a dental technician. Importance of the prevention of occupational hazards]. 666 4

Although most were unknown a few years ago, present evidence indicates that at least 25 trace elements have some pertinence to health. Unlike vitamins, they cannot be synthesized. Some trace elements are now considered important only because of their harmful effects but traces of them may be essential. Zinc is especially important during puberty, pregnancy and menopause and is related to protein metabolism. Both fluoride and cadmium accumulate in the body year after year. Cadmium is positively correlated with several chronic diseases, especially hypertension. It is obtained from smoking and drinking soft water. Silicon, generally associated with silicosis, may be necessary for healthy bone and connective tissue. Chromium, believed to be the glucose tolerance factor, is obtained from brewer's yeast, spices, and whole wheat products. Copper deficiency may be implicated in a wide range of cardiovascular and blood related disorders. Either marginal deficiencies or slight excesses of most trace elements are harmful. Nurses should instruct patients to avoid highly refined foods, fad diets, or synthetic and fabricated foods. A well balanced and varied diet is the best safeguard against trace element excesses or deficiencies.
 ...
PMID:Trace elements: implications for nursing. 689 39

Tetrandrine is a benzylisoquinoline alkaloid that has been used in China as an antifibrotic drug to treat the lesions of silicosis. Its mechanism in the treatment of silicosis is unclear. Electron spin resonance (ESR) spin trapping was employed to investigate the antioxidant properties of tetrandrine. The spin trap used was 5,5-dimethyl-1-pyrroline N-oxide (DMPO). Tetrandine efficiently reacted with hydroxyl (.OH) radicals with a reaction rate of approximately 1.4 x 10(10) M-1 s-1. The .OH radicals were generated by the Fenton reaction [Fe(II) + H2O2) as well as by reaction of chromium(V) with H2O2. Similar results were obtained using .OH radicals generated by reaction of freshly fractured quartz particles with aqueous medium. Tetrandrine also scavenged superoxide (O2-) radicals produced from xanthine/xanthine oxidase. The effect of tetrandrine on lipid peroxidation induced by freshly fractured quartz particles was evaluated using linoleic acid as a model lipid. The results showed that tetrandrine caused a significant inhibition on freshly fractured quartz-induced lipid peroxidation.
 ...
PMID:Antioxidant activity of tetrandrine and its inhibition of quartz-induced lipid peroxidation. 756 20

Risk groups with regard to bronchopulmonary precancerous and tumor diseases of occupational origin can be deduced from current occupational disease statistics. Most prominent are those working with asbestos. Each year about 250 asbestos-associated bronchial carcinomas and 400 mesotheliomas are recognized and compensated; the tendency is increasing. Because of the long latency time, the frequency peak will probably be reached in about 15 years in spite of the prohibition of asbestos usage. The second place is probably taken by malignomas among the underground uranium mine workers in Thuringia and Saxony (SDAG Wismut). Next come bronchial carcinomas with silicosis (carcinoma in scar tissue) after exposure to chromium(VI) and arsenic compounds as well as various other chemicals and metals. Dose-activity relationships are significant for all occupational carcinogenic agents, as there are also often syncancerogenic influences (especially smoking). From the data on previous loading, high risk groups, for example, among the insulation workers exposed to asbestos or uranium miners in the so-called "wild years", can be defined. A suitable screening method for the detection of bronchopulmonary tumors in the early stages has not yet been established. Medical checkups for the respective risk groups concentrate on the early X-ray detection of circular foci. As shown by recent studies, cytological sputum diagnosis, (fluorescence) bronchoscopy, and BAL cytology must be employed much more frequently in the high risk groups so that the prognostically more favorable stages of preneoplasm and carcinoma in situ can be detected and possibly treated curatively. These procedures are currently reaching a considerably higher sensitivity with the help of modern molecular biology techniques (e.g. detection of tumor-associated genetic changes and gene products). This contributes to an improvement in surveillance examinations with increasing detection of the curable early forms of tumors. However, only the further development of primary prevention, i.e. the greatest possible minimization or, if possible, total elimination of contact with carcinogenic agents and the consequent control of occupational protection will lead to a drastic reduction in the occupational risk of cancer.
 ...
PMID:[Bronchopulmonary precancerous conditions and tumors--risk groups from the occupational medicine viewpoint]. 784 56

Though metals represent the largest group of elements they rather rarely cause respiratory diseases. This article will therefore review the most important ones caused by inhaled dusts of metals and some of their inorganic compounds, but leaving aside silicosis and silicatosis as well as iatrogenically induced metal pneumopathies. Among toxic inflammatory diseases metal fume fever, an influenza-like condition caused by zinc oxide, ranks as the commonest. Activities such as oxi-acetylene cutting and welding of zinc covered metal pieces account for about 90% of all cases compensated in Switzerland. Due to the non-recurrent character of this type of work, the typical waning of symptoms while exposure is going on has become seldom. Toxic pneumonia caused by inhaled metal fumes occurs rather seldom. However, serious cases have been reported where soldiers were exposed to zinc chloride from smoke bombs. The existence and extent of chronic airflow limitation due to occupational exposure to metallic dusts have not been widely examined but are to be assumed when there is poor occupational hygiene. Concerning asthma, there are at least four metals and several of their compounds which have been proven to cause variable airway narrowing, namely chromium, nickel, platinum and cobalt (the latter as hardmetal). Platinum complex salts (chloro-compounds) are very potent sensitizers leading to a notable prevalence of asthma among exposed workforces. Nevertheless, there have been no such cases in Switzerland for more than ten years. Hard-metal not only causes asthma but also an alveolitis-like interstitial lung disease progressing to fibrosis.(ABSTRACT TRUNCATED AT 250 WORDS)
 ...
PMID:[Lung disorders due to metals]. 789 59

Uranium miners of the former Wismut company in Germany form the largest cohort of workers exposed to (222)Rn and dust in the world. The German Uranium Miner Study, Research Group Pathology, is evaluating the central pathology archive of the Wismut company. The main tasks of our study are pathological-anatomical and molecular genetic investigations of 28,975 autopsy cases and the evaluation of mining pollutants in the lungs by neutron activation analysis. As part of an observer agreement study, lung tumors are classified according to the WHO/IASLC classification and nontumorigenic lung disorders are registered. Lung tumors were analyzed for the presence of a proposed radon-specific mutation in the TP53 gene (formerly known as p53). Interim results are: (a) In the years 1957 to 1965, a high rate (69%) of small cell carcinomas was found which had declined to 34% by 1990. (b) The percentage of the deceased who suffered from silicosis is not higher in the group of lung tumors than in other tumor groups or the nontumor group. (c) The hypothesis of a radon-characteristic hotspot mutation in the TP53 tumor suppressor gene is not supported by our investigations. (d) Neutron activation analysis demonstrates that uranium, arsenic, chromium, cobalt and antimony can be found in tissue samples from the miners even when they had stopped working more than 20 years before death.
 ...
PMID:German uranium miner study--pathological and molecular genetic findings. German Uranium Miner Study, Research Group Pathology. 1056 37

Elevated disease rates have been documented among construction workers for cancer, pneumonoconiosis, asbestosis, and silicosis. However, methodologies for exposure assessment in construction are not well described in the U.S. literature. Working through a cooperative agreement with the National Institute for Occupational Safety and Health (NIOSH), the Center to Protect Workers' Rights--a research arm of the Building and Construction Trades Department, AFL-CIO--has developed and used a "Task-Based Exposure Assessment Model (T-BEAM)" for construction. The characteristic elements of T-BEAM are: (1) an emphasis on the identification, implementation, and evaluation of engineering and work practice controls; and (2) use of experienced, specially trained construction workers (construction safety and health specialists) in the exposure assessment process. A task-based approach was used because tasks, or specialized skills, form the single greatest thread of continuity in the dynamic environment of construction. Workers in the construction industry come from several crafts and are typically employed by a large number of contractors throughout their career. Project types (e.g., residential or industrial rehabilitation) are also highly variable and present unique health risks. Finally, because construction involves building, renovating, or dismantling physical surroundings, the work site is constantly changing. Between 1995 and 1996, T-BEAM was applied to the collection of approximately 200 personal exposure measurements associated with "hot work tasks"--welding and thermal cutting. Data were collected with the assistance of specially trained, journeyman ironworkers, pipe fitters, and boilermakers on nine construction sites located throughout the United States. Portable local exhaust ventilation was provided to participating contractors with the intent of measuring its impact on exposure. Results indicate that data collected in a standardized, systematic fashion from multiple work sites can be used to characterize exposures among sampled trades. Comparison of results to American Conference of Governmental Industrial Hygienists (ACGIH) threshold limit values (TLVs) demonstrate a significant health hazard among sampled trades posed by welding and thermal cutting fume, manganese, nickel, and chromium VI. Direct estimates of the probability of exceeding the ACGIH TLV for respirable particulate suggests that boilermakers (100%) and ironworkers (71%) are at greatest risk. Other task variables evaluated with respect to exposure include task, whether work was performed indoors or outdoors, intermittency of work, and use of ventilation. Use of local or mechanical ventilation reduced mean exposures to fumes significantly.
 ...
PMID:The use of a task-based exposure assessment model (T-BEAM) for assessment of metal fume exposures during welding and thermal cutting. 1066 Sep 86

The 'Sendzimir' Steel Mill, Cracow, Poland, gives employment to approximately 17,000 workers. During the years 1994-98, 1396 compensation claims for diseases related to occupational hazards were registered. After a scrupulous investigation, 851 cases were certified as occupation-related diseases. Of this number, 481 cases (56.5%) were diagnosed as pulmonary diseases, including silicosis (n = 225, 46.7%); chronic bronchitis (n = 138, 28.7%); lung carcinoma (n = 59, 12.3%); epithelial cancer (n = 42); adenocarcinoma (n = 12); microcellular carcinoma (n = 5); asthma, 12 atopic and 24 non-atopic (n = 36, 7.5%); and asbestosis (n = 23, 4.8%). Chronic bronchitis was diagnosed in patients exposed to industrial dusts, containing SiO2, NOx, and SO2. Asthma occurred most frequently among those exposed mainly to Cr+6, Co and Ni containing dusts, and lung carcinoma in those exposed to policyclic aromatic hydrocarbons, including benz(a)pyren, asbestos, chromium, vapours of oils and lubricants. In 1994-96, chronic bronchitis and silicosis, and in 1997-98, lung carcinoma and asthma were most frequently diagnosed in the workers under study. It is likely that the diminishing frequency of chronic bronchitis and silicosis was the consequence of technological progress, and greater concern for hygiene standards. Increasing incidence of lung cancer reflects long latency characteristic of this illness.
 ...
PMID:Occurrence of pulmonary diseases in steel mill workers. 1096 40


1 2 Next >>