Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0033036 (APC)
 10,214 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Anisotropic thin film materials of metallosupramolecular polyelectrolyte-amphiphile complexes (denoted PACs) with structures at several length scales were fabricated through a multistep self-assembly process. Metal ion-mediated self-assembly of the ditopic ligand 1,4-bis(2,2':6',2"-terpyridine-4'-yl)benzene and electrostatic binding with the amphiphile dihexadecyl phosphate result in a PAC with tailored surface chemical properties, including solubility and surface activity. The PAC forms a stable monolayer at the air-water interface that is readily transferred and oriented on solid supports with the Langmuir-Blodgett technique. The presented strategy unifies colloid and metallosupramolecular chemistry and opens a versatile route to hierarchical materials with tailored structures and functions.
 ...
PMID:A route to hierarchical materials based on complexes of metallosupramolecular polyelectrolytes and amphiphiles. 1082 31

New amphiphilic photochromic benzo-15(18)-crown-5(6) ethers (APC) differing in the position of the octadecyl substituent and the size of the crown cavity were synthesized. The compounds form stable monolayers in the air/water and air/alkaline metal salt solution interfaces. The results of the pressure isotherm measurements, atomic force microscopy (AFM), and electronic spectroscopy show that the structure of the monolayers formed depends on the structure of the parent APC and the nature of the cation in salt solutions. The area per molecule of APC in the monolayer (specific area) is the smallest on the water surface and increases by 20-40% on the aqueous subphase surface with an increasing concentration of salts therein to indicate the formation of APC complexes with the metal cations. When the hydrophobic aliphatic substituent is displaced from position 3 to position 5 of the benzothiazole ring, the specific area on the surface of water and subphases decreases twofold, which indicates the compactization of the monolayer on this modification. A reversible E-Z-photoisomerization of APC was found in the monolayers formed in the salt solution/air interface. The features of the reaction are defined by the specific organization of the amphiphilic molecules in the monolayer and by the nature of the cation.
 ...
PMID:[Synthesis of amphiphilic photochromic benzo-15(18)-crown-5(6)-ethers and their properties in monolayers]. 1103 31

A short-term rat feeding study was conducted to evaluate the oral toxicity of FAVOR PAC (CAS Registry No. 9003-04-7), one member of a family of cross-linked sodium polyacrylate polymers developed by Stockhausen GmbH & Co KG (Krefeld, Germany). FAVOR polymers are classified as superabsorbent polymers because of their ability to absorb and retain large volumes of fluid. In this short-term study, three groups of 10 male and 10 female Sprague-Dawley rats were administered 0 (control), 1, or 5% FAVOR PAC in the diet daily for up to 32 days. No significant changes in clinical signs, body weight and food consumption, functional observation battery results, ophthalmoscopy, hematology and clinical chemistries, or absolute and relative organ weights were observed. Significant differences between treated and control animals were limited to increases in water consumption and modifications in urinary ionic excretion. Both findings were likely the result of the relatively high concentration of sodium in the test article, and thus consistent with adaptive physiologic changes, not overt toxicity. In conclusion, levels of up to 5% FAVOR PAC in the diet produced no treatment-related toxicity in rats under the conditions of this short-term test (i.e., a NOAEL of 5% FAVOR PAC in the diet was identified).
 ...
PMID:Short-term oral toxicity study of FAVOR PAC in rats. 1116 24

The purpose of this study was to evaluate the shear bond strengths of a composite resin (Transbond XT; 3M/Unitek, Monrovia, Calif) and a resin-modified glass ionomer (Fuji Ortho LC; GC America Inc, Alsip, Ill) cured with 2 different light-curing units: a conventional visible light unit (Ortholux XT; 3M Dental Products, St Paul, Minn) and a xenon arc light unit (Plasma Arc Curing [PAC] System; American Dental Technologies, Corpus Christi, Texas). One hundred twenty freshly extracted bovine permanent mandibular incisors were randomly divided into 1 of 8 groups; each group consisted of 15 specimens. Two groups (1 group for each type of adhesive) were exposed to the visible light for 20 seconds (Transbond XT) and 40 seconds (Fuji Ortho LC), respectively, and used as control groups. The remaining 6 groups (3 for each adhesive) were cured with the xenon arc light for 2, 5, and 10 seconds. After bonding, all samples were stored in distilled water at room temperature for 24 hours and subsequently tested in a shear mode on an Instron universal testing machine (Instron Corp, Canton, Mass). For the groups bonded with Transbond XT, no statistically significant differences (P =.868) were found between the shear bond strength of the control group cured with Ortholux XT and those of the groups cured with the PAC System for 2, 5, or 10 seconds. When the shear bond strengths of the groups bonded with Fuji Ortho LC were evaluated, no statistically significant differences (P =.087) were found between the control group that was cured with Ortholux XT and those cured with the PAC System. The bond strength of the composite resin was significantly higher than that of the resin-modified glass ionomer in all the groups tested (P <.0001). The present findings indicate that, compared with visible light-curing, the xenon arc light enables the clinician to significantly reduce the curing time of both bonding agents, without affecting their shear bond strengths. Therefore, xenon arc light sources can be recommended as an advantageous alternative for curing both composite resins and resin-modified glass ionomers.
 ...
PMID:Effects of conventional and high-intensity light-curing on enamel shear bond strength of composite resin and resin-modified glass-ionomer. 1117 37

A multiple-hurdle antimicrobial process for beef trim was developed. The microbial profiles of inoculated lean beef trim tissue (BTL) and fat-covered lean beef trim (BTF) were monitored during prolonged refrigerated storage following the application of successive multiple antimicrobial treatments applied to inoculated beef trim on a processing conveyor belt set at a belt speed of 1 cm/s. Beef trim (meat size approximately 15 by 15 cm) was preinoculated with bovine feces before all treatments that included the following: control, no treatment; water wash at 65 psi for five passes; water plus lactic acid (2% [vol/vol] room temperature lactic acid wash at 30 psi for three passes); combination treatment 1 (water plus 65 degrees C hot water at 30 psi for one pass plus hot air at 510 degrees C for four passes plus lactic acid), combination treatment 2 (water plus hot water at 82 degrees C for one pass plus hot air at 510 degrees C for five passes plus lactic acid), and combination treatment 3 (water plus hot water at 82 degrees C for three passes plus hot air at 510 degrees C for six passes plus lactic acid). The effects of treatments on bacterial populations were monitored by enumerating mesophilic aerobic bacteria (APC), presumptive lactic acid bacteria (PLAB), psychrotrophic bacteria (PCT), coliforms, and Escherichia coli biotype 1 on product stored for up to 7 days at 4 degrees C. In the case of BTL, the numbers of APC, PCT, and PLAB increased during storage at 5 degrees C, whereas the numbers of coliform and E. coli decreased on average by 1.8 log CFU/cm2, then remained constant following the initial reduction. Negligible effects on color quality were observed from multihurdle treatment combination 1. In the case of the BTF, the microbial reductions by treatments were much greater than the reduction on BTL. The pH of treated BTF increased more slowly than the pH of treated BTL, resulting in further reduction of the microflora on BTF. Except for control and water treatments, all sample treatments involving lactic acid resulted in continuously decreasing microbial populations. Based on microbial reduction and quality aspects, it was concluded that successively applied combination antimicrobial treatments for meat trim could offer potential food safety benefits.
 ...
PMID:Development of a multiple-step process for the microbial decontamination of beef trim. 1119 43

Renal Na+ handling abnormalities have been shown in preascitic cirrhosis. To investigate the underlying pathophysiology, the effects of different sodium intakes on Na(+) balance and renal hemodynamics were assessed at 100 mEq Na+/day (low-sodium diet [LSD]) and after 6 days of 250 mEq Na+/day (high-sodium diet [HSD]). Eight asymptomatic patients with cirrhosis (Pugh-Child A class) (PAC) and 10 healthy controls (CON) were studied. At HSD, although CON readjusted Na+ excretion within the fourth day, PAC did not reach the new balance and developed a final greater Na+ retention (+437 mEq in PAC v +228 mEq in CON, P<.001). In PAC, fractional Na+ excretion (FENa) was significantly lower than in CON at LSD (P<.05), and, after HSD, increased in both groups (P<.05). In PAC, renal vascular resistances (RVR) at LSD resulted lower than in CON (P<.05) and failed to decrease after HSD. As a consequence, after HSD, glomerular filtration rate and renal plasma flow failed to increase in PAC. PRA and plasma aldosterone were significantly lower in PAC, than in CON at LSD (P<.05), and decreased in both groups after HSD (P<.05). Proximal Na+ reabsorption (RProx) [as indicated by fractional free water clearance measured in a state of maximal water diuresis] at LSD was lower in PAC than in CON (P<.05) and decreased in both groups after HSD (P<.05). In summary, early stages of cirrhosis are characterized by: (1) a reduction of RVR, probably associated with splanchnic vasodilation; (2) a Na+ retention already at LSD, as indicated by the lower FENa observed in PAC, that produces extracellular volume (ECV) expansion, with a consequent RProx and renin-angiotensin-aldosterone axis (RAS) suppression; (3) a greater Na+ retention after HSD, associated with an abnormal adaptation of renal hemodynamic, a greater ECV expansion and a consequent Rprox and RAS suppression. These data show the presence of early renal hemodynamic dysfunction in PAC. Our findings also show in this phase of the disease a preserved adaptation of RProx and RAS, thus suggesting that the observed tubular Na+ reabsorption derangement is probably related to abnormal ANP behavior.
 ...
PMID:Sodium retention in preascitic stage of cirrhosis. 1132 May 1

The gas-liquid mass transfer coefficient K(L)a in the fermenter is a strong function of mode of energy dissipation and physico-chemical properties of the liquid media. A combination of disc turbine (DT) and pitched blade turbine down flow (PTD) impellers has been tested in laboratory bioreactor for gas hold-up and gas-liquid mass transfer performance for the growth and biotransformation medium for an yeast isolate VS1 capable of biotransforming benzaldehyde to L-phenyl acetyl carbinol (L-PAC) and compared with those in water.Correlations have been developed for the prediction of the fractional gas hold-up and gas-liquid mass transfer coefficient for the above media. The mass transfer coefficient and respiration rate have been determined in the shake flask for the growth as well as for biotransformation medium. These results, then have been used to optimize the operating parameters (impeller speed and aeration) for growth and biotransformation in a laboratory bioreactor. The comparison of cell mass production and L-PAC production in the bioreactor has been done with that obtained in shake flask studies.
 ...
PMID:Scale-up of biotransformation process in stirred tank reactor using dual impeller bioreactor. 1135 67

This paper studied the efficiency of algae removal by ferrate from two kinds of raw water which were collected from Donghu and Tiegang reservoir respectively. The experimental results showed that the removal efficiency of algae reached about 95% only through PAC coagulation when the raw water was extracted from Donghu reservoir in which most of algae was Chlorella. But dealing with Tiegang raw water in which the majority of algae were Oscillatoria, terrate was used as pre-oxidant coupling with PAC coagulation not only using PAC to flocculate and the efficiency of algae removal could be up to 97.85%. However this treatment method using ferrate as pre-oxidant overmatched the traditional method prechlorination for algae removal.
 ...
PMID:[The efficiency of algae removal from drinking water by ferrate]. 1143 74

The effect of water content on the volatilization of nonaqueous phase liquid (NAPL) in unsaturated soils was characterized by one-dimensional venting experiments conducted to evaluate the lumped mass transfer coefficient. An empirical correlation based upon the modified Sherwood number, Peclet number, and normalized mean grain size was used to estimate initial lumped mass transfer coefficients over a range of water content. The effects of water content on the soil vapor extraction SVE process have been investigated through experimentation and mathematical modeling. The experimental results indicated that a rate-limited NAPL-gas mass transfer occurred in water-wet soils. A severe mass transfer limitation was observed at 61.0% water saturation where the normalized effluent gas concentrations fell below 1.0 almost immediately, declined exponentially from the initiation of venting, and showed long tailing. This result was attributed to the reduction of interfacial area between the NAPL and mobile gas phases due to the increased water content. A transient mathematical model describing the change of the lumped mass transfer coefficient was used. Simulations showed that the nonequilibrium mass transfer process could be characterized by the exponent beta, a parameter which described the reduction of the specific area available for NAPL volatilization. The nonequilibrium mass transfer limitations were controlled by the soil mean grain size and pore gas velocity, were well described by beta values below 1.0 at low water saturation, and were well predicted with beta values greater than 1.0 at high water saturation.
 ...
PMID:Effect of water content on transient nonequilibrium NAPL-gas mass transfer during soil vapor extraction. 1184 63

Irinotecan (CPT-11), a water-soluble topoisomerase I inhibitor, is metabolized by carboxylesterase enzymes to form an active metabolite, SN-38. Recent studies have shown that irinotecan also undergoes oxidative metabolism by the P450 isozyme CYP3A4, leading to the formation of a minor inactive metabolite, 7-ethyl-10-[4-N-[(5-aminopentanoic acid)-1-piperidino]-carbonyloxy-camptothecin (APC). The elucidation of this metabolic pathway suggests the potential for drug interactions when irinotecan is administered with other inducers or substrates of CYP3A4. In this report, the authors summarize the pharmacokinetic profile of irinotecan and its major metabolites with and without concomitant phenytoin administration in an individual patient. These studies revealed that concomitant phenytoin administration resulted in a marked decrease in the systemic exposure to irinotecan and SN-38 and an increase in the exposure to APC. The area under the curve of irinotecan and SN-38 decreased by 63% and 60%, respectively; the area under the curve of APC increased by approximately 16%. Further detailed pharmacokinetic studies of irinotecan in patients receiving concomitant therapy with enzyme-inducing anticonvulsants are required so that rational dosing recommendations can be provided for this patient population.
 ...
PMID:Influence of phenytoin on the disposition of irinotecan: a case report. 1199 Jun 99


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>