Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0027960 (mole)
 21,279 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Sonolysis of carbon dioxide dissolved in water was performed from a standpoint of reducing this material in atmosphere. During one hour of sonication, the amount of CO2 decreased to about half at 5 degrees C under CO2-Ar atmosphere. The decreasing rate for CO2 followed the order Ar > He > H2 > N2 and it was down with increasing temperature in the range of 5-45 degrees C. The most favorable concentration for reducing CO2 was 0.03 (mole fraction of CO2 in gas phase). This concentration in gas phase means an equal mixture of CO2 and Ar in water, because CO2 is more soluble than Ar. Since carbon dioxide dissolved in water would be partly ionized, the roles of ions on the sonolysis were also examined. Gaseous reaction products were CO, H2 and a small amount of O2. Carbon monoxide and hydrogen might be obtained from CO2 and H2O by sonolysis, respectively. Both gases are fuel and react each other to C1 compounds such as methanol, and so on. Therefore, irradiation of ultrasonic waves should be an important technique for reducing CO2.
 ...
PMID:Sonochemical reduction of carbon dioxide. 1127 Mar 40

Seedlings of seven temperate tree species (Acer pseudoplatanus L., Betula pendula Roth, Fagus sylvatica L., Fraxinus excelsior L., Juglans regia L., Quercus petraea Matt. Liebl. and Quercus robur L.) were grown in a nursery under neutral filters transmitting 45% of incident global irradiance. During the second or third year of growth, leaf photosynthetic capacity (i.e., maximal carboxylation rate, Vcmax, maximal photosynthetic electron transport rate, Jmax, and dark respiration, Rd) was estimated for five leaves from each species at five or six leaf temperatures (10, 18, 25, 32, 36 and 40 degrees C). Values of Vcmax and Jmax were obtained by fitting the equations of the Farquhar model on response curves of net CO2 assimilation (A) to sub-stomatal CO2 mole fraction (ci), at high irradiance. Primary parameters describing the kinetic properties of Rubisco (specificity factor, affinity for CO2 and for O2, and their temperature responses) were taken from published data obtained with spinach and tobacco, and were used for all species. The temperature responses of Vcmax and Jmax, which were fitted to a thermodynamic model, differed. Mean values of Vcmax and Jmax at a reference temperature of 25 degrees C were 77.3 and 139 micromol m(-2) s(-1), respectively. The activation energy was higher for Vcmax than for Jmax (mean values of 73.1 versus 57.9 kJ mol(-1)) resulting in a decrease in Jmax/Vcmax ratio with increasing temperature. The mean optimal temperature was higher for Vcmax than for Jmax (38.9 versus 35.9 degrees C). In addition, differences in these temperature responses were observed among species. Temperature optima ranged between 35.9 and above 45 degrees C for Vcmax and between 31.7 and 43.3 degrees C for Jmax, but because of data scatter and the limited range of temperatures tested (10 to 40 degrees C), there were few statistically significant differences among species. The optimal temperature for Jmax was highest in Q. robur, Q. petraea and J. regia, and lowest in A. pseudoplatanus and F. excelsior. Measurements of chlorophyll a fluorescence revealed that the critical temperature at which basal fluorescence begins to increase was close to 47 degrees C, with no difference among species. These results should improve the parameterization of photosynthesis models, and be of particular interest when adapted to heterogeneous forests comprising mixtures of species with diverse ecological requirements.
 ...
PMID:Temperature response of leaf photosynthetic capacity in seedlings from seven temperate tree species. 1127 16

This paper presents a wireless, passive, remote query CO2 sensor comprising a ribbon-like magnetoelastic thick-film coated with a mass-changing CO2 responsive polymer synthesized from acrylamide and isooctylacrylate. In response to a magnetic field impulse, the magnetostrictive magnetoelastic sensor vibrates at a characteristic resonant frequency that is inversely dependent upon the mass of the attached CO2 responsive polymer. The mechanical vibrations of the magnetostrictive sensor launch magnetic flux, which can be detected remotely using a pickup coil. By monitoring the resonant frequency of the passive sensor, the atmospheric CO2 concentration can be determined without the need for physical connections to the sensor or specific alignment requirements. The effect of humidity and the CO2 responsive copolymer composition on the measurement sensitivity are reported. Greatest sensitivity is achieved with a polymer comprising a 1:1 mole ratio of acrylamide to isooctyl acrylate. A 0.7% change in atmospheric CO2 concentration can be detected for a 20 microns thick polymer coated sensor.
 ...
PMID:A wireless, remote query magnetoelastic CO2 sensor. 1129 40

Inflammatory linear verrucous epidermal nevus (ILVEN) is a type of epidermal nevus with the onset usually at early childhood. It is generally rather persistent with pruritus as a prominent symptom and is resistant to various treatments. We report a case of disfiguring ILVEN of the vulvar area, which was treated successfully with low fluence CO2 laser. The patient remains improved 2 years following laser therapy.
 ...
PMID:Perivulvar inflammatory linear verrucous epidermal nevus (ILVEN) treated with CO2 laser. 1136 Apr 27

The term linear epidermal nevus (LVEN) refers to benign hyperplasia of the epidermis. Three types of LVEN can be distinguished: localized, systemic and inflammatory form. All have in common resistance to treatment and risk of recurrence. We report the observations of 5 patients with inflammatory linear verrucous epidermal nevus and 5 patients with linear verrucous epidermal nevus. Management by superpulsed CO2 laser was performed as follows: test treatment, completed by removal of the lesion in one or more sessions. Treatment was effective in all cases but 2. Satisfactory cosmetic results were obtained; slight hyperpigmentation, transitory desquamation and erythematous papules were observed. There was no recurrence in two years follow-up. We suppose that for the two patients with recurrence, our treatment failure is due to the lower laser parameters used in these patients compared to the others, because of their younger age.
 ...
PMID:Resurfacing CO2 laser treatment of linear verrucous epidermal nevus. 1152 51

Water and carbon dioxide concentrations within individual and selected groups of fluid inclusions in quartz were analyzed by using laser decrepitation and quantitative capacitance manometer determination. The useful limit of detection (calculated as ten times the typical background level) is about 5 x 10(-10) mol of H2O and 5 x 10(-11) mol of CO2; this H2O content translates into an aqueous fluid inclusion approximately 25 micrometers in diameter. CO2/H2O determinations for 38 samples (100 separate measurements) have a range of H2O amounts of 5.119 x 10(-9) to 1.261 x 10(-7) mol; CO2 amounts of 7.216 x 10(-10) to 1.488 x 10(-8) mol, and CO2/H2O mole ratios of 0.011 to 1.241. Replicate mole ratio determinations of CO2/H2O for three identical (?) clusters of inclusions in quartz have average mole ratios of 0.0305 +/- 0.0041 1 sigma. Our method offers much promise for analysis of individual fluid inclusions, is sensitive, is selective when the laser energy is not so great as to melt the mineral (laser pits approximately 50 micrometers in diameter), and permits rapid analysis (approximately 1 h per sample analysis).
 ...
PMID:Determination of H2O and CO2 concentrations in fluid inclusions in minerals using laser decrepitation and capacitance manometer analysis. 1153 56

Thermodynamic calculations provide the means to quantify the chemical disequilibrium inherent in the mixing of reduced hydrothermal fluids with seawater. The chemical energy available for metabolic processes in these environments can be evaluated by taking into account the pressure and temperature dependence of the apparent standard Gibbs free energies of reactions in the S-H2-H2O system together with geochemical constraints on pH, activities of aqueous sulfur species and fugacities of H2 and/or O2. Using present-day mixing of hydrothermal fluids and seawater as a starting point, it is shown that each mole of H2S entering seawater from hydrothermal fluids represents about 200,000 calories of chemical energy for metabolic systems able to catalyze H2S oxidation. Extrapolating to the early Earth, which was likely to have had an atmosphere more reduced than at present, shows that this chemical energy may have been a factor of two or so less. Nevertheless, mixing of hydrothermal fluids with seawater would have been an abundant source of chemical energy, and an inevitable consequence of the presence of an ocean on an initially hot Earth. The amount of energy available was more than enough for organic synthesis from CO2 or CO, and/or polymer formation, indicating that the vicinity of hydrothermal systems at the sea floor was an ideal location for the emergence of the first chemolithoautotrophic metabolic systems.
 ...
PMID:Geochemical constraints on chemolithoautotrophic reactions in hydrothermal systems. 1153 67

Conditions and systems for on-line combustion of effluents from capillary gas chromatographic columns and for removal of water vapor from product streams were tested. Organic carbon in gas chromatographic peaks 15 s wide and containing up to 30 nanomoles of carbon was quantitatively converted to CO2 by tubular combustion reactors, 200 x 0.5 mm, packed with CuO or NiO. No auxiliary source of O2 was required because oxygen was supplied by metal oxides. Spontaneous degradation of CuO limited the life of CuO reactors at T > 850 degrees C. Since NiO does not spontaneously degrade, its use might be favored, but Ni-bound carbon phases form and lead to inaccurate isotopic results at T < 1050 degrees C if gas-phase O2 is not added. For all compounds tested except CH4, equivalent isotopic results are provided by CuO at 850 degrees C, NiO + O2 (gas-phase mole fraction, 10(-3)) at 1050 degrees C and NiO at 1150 degrees C. The combustion interface did not contribute additional analytical uncertainty, thus observed standard deviations of 13C/12C ratios were within a factor of 2 of shot-noise limits. For combustion and isotopic analyses of CH4, in which quantitative combustion required T approximately 950 degrees C, NiO-based systems are preferred, and precision is approximately 2 times lower than that observed for other analytes. Water must be removed from the gas stream transmitted to the mass spectrometer or else protonation of CO2 will lead to inaccuracy in isotopic analyses. Although thresholds for this effect vary between mass spectrometers, differential permeation of H2O through Nafion tubing was effective in both cases tested, but the required length of the Nafion membrane was 4 times greater for the more sensitive mass spectrometer.
 ...
PMID:Performance and optimization of a combustion interface for isotope ratio monitoring gas chromatography/mass spectrometry. 1153 20

The CELSS Test Facility (CTF) is a device for measuring crop plant productivity in the micro-gravity environment of Space Station Freedom. It will allow us to address questions of crop productivity in space, versus that on the ground. The crop productivity factors that will be measured are rates of: 1) biomass production, 2) food production, 3) O2 and CO2 exchange, and 4) water transpiration. In addition, other productivity factors of specific crops will be determined, such as : 1) the ratio of edible to inedible biomass (harvest index), 2) leaf area exposed to and collecting light (leaf area index), 3) ratio of root mass to total biomass, and 4) photosynthetic efficiency (ratio of moles of CO2 fixed (or O2 produced), per mole of photons of specific energies used). Plant and crop morphology, at several levels, ranging from the community to the sub-cellular, will also be evaluated.
 ...
PMID:The CELSS Test Facility project: an example of a CELSS flight experiment system. 1153 82

The long-term vegetative and reproductive growth rates of a wheat crop (Triticum aestivum L.) were determined in three separate studies (24, 45, and 79 days) in response to a wide range of photosynthetic photon fluxes (PPF, 400-2080 micromoles per square meter per second; 22-150 moles per square meter per day; 16-20 hour photoperiod) in a near-optimum, controlled-environment. The CO2 concentration was elevated to 1200 micromoles per mole, and water and nutrients were supplied by liquid hydroponic culture. An unusually high plant density (2000 plants per square meter) was used to obtain high yields. Crop growth rate and grain yield reached 138 and 60 grams per square meter per day, respectively; both continued to increase up to the highest integrated daily PPF level, which was three times greater than a typical daily flux in the field. The conversion efficiency of photosynthesis (energy in biomass/energy in photosynthetic photons) was over 10% at low PPF but decreased to 7% as PPF increased. Harvest index increased from 41 to 44% as PPF increased. Yield components for primary, secondary, and tertiary culms were analyzed separately. Tillering produced up to 7000 heads per square meter at the highest PPF level. Primary and secondary culms were 10% more efficient (higher harvest index) than tertiary culms; hence cultural, environmental, or genetic changes that increase the percentage of primary and secondary culms might increase harvest index and thus grain yield. Wheat is physiologically and genetically capable of much higher productivity and photosynthetic efficiency than has been recorded in a field environment.
 ...
PMID:Exploring the limits of crop productivity. I. Photosynthetic efficiency of wheat in high irradiance environments. 1153 42


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>