Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0027960 (mole)
 21,279 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

A peripunctal nevus is a rare lesion of the eyelid margin, six examples of which are included in this report. The lesions all involved the lower punctum and had been present for many years without producing epiphora. In addition to their variable clinical pigmentation and translucent appearance on biomicroscopy, all shared several other diagnostically useful clinical features: an overall dome-shape with a fine micronodularity; a prominent ramifying vascularity; and, most importantly, circumferentially swollen punctal lips that created a slit-like punctal orifice. Histopathologically, the lesions were predominantly or exclusively subepithelial melanocytic nevi and were demonstrated not to compress the punctum or canaliculus. Infiltration of the nevus cells within the orbicularis striated muscle fibers was a common finding owing to the latter's superficial location in the eyelids. If patients request excision for cosmetic reasons, these lesions are best managed by a horizontal circular shave excision with the temporary placement of a silicon punctual plug. The differential diagnosis includes cyst, papilloma, melanoma, and basal cell carcinoma.
 ...
PMID:Peripunctal melanocytic nevi. Distinctive clinical findings and differential diagnosis. 277 65

In phospholipid membranes attacked by phospholipase A(2) (PLA(2)), accumulation of degradation products influences the binding affinity as well as the catalytic activity of PLA(2). Such accumulation in its turn depends on the rate of membrane degradation and the efflux of degradation products from the membrane, the latter being influenced by the stirring conditions in the system. This complicated process was investigated with a new ellipsometric technique for in situ measurement of membrane mass in a well-defined flow system. Planar phospholipid bilayers were formed on rotating silicon discs in buffer solution. After the addition of 0.05-100 ng/ml of PLA(2) (from Naja mocambique mocambique) to the buffer, mass desorption could be measured with a precision of 3-5 ng/cm(2), that is, about 1% of the surface mass of a single bilayer. Using radiolabeled phospholipids and thin-layer chromatography, it was verified that only the degradation products desorb from the membrane, which was confirmed by the desorption of mixtures of phospholipids, lysophospholipids, and fatty acids. The rotating disc allows the exact calculation of the mass transfer constant for transport-limited exchange of lipid between fluid and disc surface, as a function of rotation rate. By using the mass transfer constant, the critical micelle concentrations, and the mole fractions of products, desorption kinetics could be fully described. The amount of degraded phospholipid could be continuously monitored as the sum of the product mass still present in the membrane, as inferred from the desorption rate, and the mass already lost from the surface. It is concluded that ellipsometry is a suitable tool for studying the effects of PLA(2) on membranes.
 ...
PMID:Critical micelle concentrations and stirring are rate limiting in the loss of lipid mass during membrane degradation by phospholipase A2. 917 47

A unique immunoliposome has been developed as a drug delivery vehicle for immunotherapy. Human recombinant interleukin-2 (IL-2) has been chemically coupled to the external surface of small unilamellar vesicles (SUVs) containing methotrexate as a candidate immunosuppresive agent in order to specifically direct the drug-bearing liposome to activated T-cells expressing the high affinity IL-2 receptor. This drug delivery system is designed to deliver an immunosuppressive agent to those cells that actively participate in disorders such as graft rejection without delivering an effective but potentially toxic drug to all cells of the immune system as well as other healthy tissues. IL-2 was chemically modified with succinimidyl 4-[p-maleidophenyl butyrate](SMPB) while the receptor binding domain on IL-2 was protected by monoclonal anti-IL-2 bound to Protein A-Silica Gel. The antibody recognizes the receptor binding domain of the IL-2 molecule. The IL-2 was derivatized with S-succinimidyl-S-thioacetate (SATA) in order to add an acetyl thioester group to the lipid and create the complex. The derivatized lipid (SATA-PE) was then part of the liposome formulation containing DSPC:cholesterol: SATA-PE at a mole ratio of 1.5:1.0:0.26. SMPB-IL-2 was covalently coupled to the external surface of the SUV after deacetylation of the thioester moiety at pH 7.4 in PBS. Liposomes prepared by sonication or extrusion had an average diameter of 46-50 nm. SUV-IL-2 bound to the high affinity IL-2 receptor as measured by competitive binding assays and Scatchard analysis using 111InCl2-loaded liposomes The preparation exhibited a binding constant of 30 pM, consistent with values for free IL-2 cited in the literature. SUV IL-2 could be used as the sole source of IL-2 for the murine CTLL-2 T-cell line or for human mitogen-activated PBLs. The presence of IL-2 coupled to the surface was absolutely required for delivery of the drug to the cell. When methotrexate was encapsulated within the internal aqueous space, receptor-mediated endocytosis led to the inhibition of proliferation due to delivery of MTX to the cytoplasm of the cell. More than 90% of the methotrexate was retained within the liposome during storage over a 24-h period at 4 degrees C. This immunoliposome represents a new class of cell specific immunoliposomes whose entry into the cell is controlled by a cell surface receptor.
 ...
PMID:The development of IL-2 conjugated liposomes for therapeutic purposes. 954 72

A recently described reaction for the UV-mediated attachment of alkenes to silicon surfaces is utilized as the basis for the preparation of functionalized silicon surfaces. UV light mediates the reaction of t-butyloxycarbonyl (t-BOC) protected omega-unsaturated aminoalkane (10-aminodec-1-ene) with hydrogen-terminated silicon (001). Removal of the t-BOC protecting group yields an aminodecane-modified silicon surface. The resultant amino groups can be coupled to thiol-modified oligodeoxyribonucleotides using a heterobifunctional crosslinker, permitting the preparation of DNA arrays. Two methods for controlling the surface density of oligodeoxyribonucleotides were explored: in the first, binary mixtures of 10-aminodec-1-ene and dodecene were utilized in the initial UV-mediated coupling reaction; a linear relationship was found between the mole fraction of aminodecene and the density of DNA hybridization sites. In the second, only a portion of the t-BOC protecting groups was removed from the surface by limiting the time allowed for the deprotection reaction. The oligodeoxyribonucleotide-modified surfaces were extremely stable and performed well in DNA hybridization assays. These surfaces provide an alternative to gold or glass for surface immobilization of oligonucleotides in DNA arrays as well as a route for the coupling of nucleic acid biomolecular recognition elements to semiconductor materials.
 ...
PMID:Covalent attachment of oligodeoxyribonucleotides to amine-modified Si (001) surfaces. 1098 73

Specimens of an experimental glass-ionomer cement were stored in water (initial pH 5.9) and aqueous lactic acid (initial pH 2.7) for storage periods of 1 week up to 6 weeks. Change in mass, solution pH and fluoride release were measured at weekly intervals, and other ions were determined at weeks 1, 2, 4 and 6. In water, cements raised the pH consistently to 6.7-6.9 from weeks 2 to 6, but this did not correspond to uniform amounts of ions released, nor even to consistent mole ratios of ions in solution. Similarly, in lactic acid, pH was raised to between 3.6 and 4.5, but without a consistent concentration of ions in solution. In near neutral conditions, calcium was found to be virtually insoluble and remained within the cement, whereas reasonable amounts of sodium, aluminium, phosphorus, silicon and fluoride were released at all time intervals, with downward trends over time. In acidic conditions, considerable amounts of calcium were released over time, and amounts of calcium, aluminium, phosphorus and silicon increased with time, reaching a maximum in week 4. This suggests that as maturation proceeds, there is an increase in the acid-soluble fraction of the cement containing these elements. Fluoride release was found to be as previously reported, i.e. greater amounts in the early stages of the experiment, and with a gradual decline, and with greater amounts in acid than in water. Determination of fluoride with and without the decomplexing reagent TISAB showed that 70-75% of the total fluoride was released in "free" form in water for most weeks, whereas in acid, it declined sharply and by week 6, an estimated total of 96% of the fluoride released was complexed.
 ...
PMID:Buffering and ion-release by a glass-ionomer cement under near-neutral and acidic conditions. 1205 29

To improve the coagulation efficiency for water treatment purposes, a composite aluminium-silicon coagulant, the polyaluminium silicate chloride was prepared and characterised. The preparation process included the preparation of polyaluminium chloride and polysilicic acid followed by the compounding of the two solutions. The prepared polyaluminium silicate chloride coagulant solution had an aluminium concentration of 0.10 mole per litre, hydroxyl to aluminium molar ratios between 0.5 and 2.0, and silicon to aluminium molar ratios between 0.075 and 0.075. Aluminium-27 nuclear magnetic resonance spectroscopy, photon correlation spectroscopy, streaming current measurement, jar tests and pilot-scale coagulation tests were employed to study the aluminium speciation, particle size distribution, electrokinetic and coagulation properties of this composite coagulant. In comparison with polyaluminium chloride, polyaluminium silicate chloride contains less polynuclear aluminium [AlO4Al12(OH)24(H2O)12]7+ and shows smaller charge neutralisation capacity. However, its particle size shows a significant increase, which enhances the coagulation efficiency. The results show that polyaluminium silicate chloride is an efficient composite coagulant for water treatment.
 ...
PMID:Preparation and characterisation of polyaluminium silicate chloride coagulant. 1270 57

Using neutron reflectometry, adsorption from an equimolar mixture of hexane + perfluorohexane to a fluorophobic, octadecyl-coated, silicon substrate has been investigated as a function of temperature in the one-phase region upon approach to liquid-liquid coexistence. The composition of the investigated mixture, x(F) = 0.50, is well removed from the critical composition of x(F) = 0.36, where x(F) is the perfluorohexane mole fraction. To aid the modeling, mixtures with three different neutron refractive index contrasts have been used: namely, mixtures of C(6)H(14) + C(6)F(14) (H-F), C(6)D(14) + C(6)F(14) (D-F), and a mixture of C(6)H(14) + C(6)D(14) + C(6)F(14) which has been adjusted to have the same refractive index as silicon (CMSi). For all three contrasts, the principal features of the composition profile normal to the interface follow similar trends as the temperature T is reduced towards T(0), the coexistence temperature. These features consist of: (i) a hexane-rich primary adsorption layer appended to the octadecyl coupled layer. This primary layer is 22 +/- 5 A thick and becomes increasingly enriched in hexane as T(0) is approached. (ii) A tail that decays exponentially towards the bulk composition with a characteristic decay length zeta. As T(0) is approached, zeta increases. The scattering length density profiles have been converted to volume fraction profiles and the surface excess of hexane Gamma has been determined as a function of temperature for all three contrasts. As T(0) is approached Gamma increases, and its behavior can be represented using the scaling law Gamma approximately |T - T(0)|(-m). The resulting values of m are 0.71 +/- 0.09, 0.68 +/- 0.04, and 0.68 +/- 0.06 for the D-F, H-F, and CMSi contrasts, respectively. The behavior of Gamma with temperature does not adhere to the Gamma approximately |T - T(0)|(-1/3) law expected for complete wetting in systems with van der Waals interactions nor does it correspond to Gamma approximately |T - T(c)|(-0.305) expected for critical adsorption. The magnitude of the exponent m indicates that the adsorption resides in the crossover region between critical adsorption and complete wetting.
 ...
PMID:Adsorption from alkane+perfluoroalkane mixtures at fluorophobic and fluorophilic surfaces. II. Crossover from critical adsorption to complete wetting. 1552 72

The structure, reactivity, and acid-base properties of mixed monolayers prepared by photochemical reaction of hydrogen-terminated silicon with mixtures of ethyl undecylenate and n-alkenes were studied by ATR-FTIR spectroscopy and contact-angle measurements. The surface composition of the mixed monolayers and its correlation with the hydrolysis reactivity of terminal ethoxycarbonyl (ester) groups were investigated by systematically varying the mole fraction of ethyl undecylenate and the chain length of the unsubstituted alkenes in the binary deposition solution. It has been shown that the mole fraction of ester groups on the surface deviates only slightly from the mole fraction of ethyl undecylenate in the solution. The efficiency of ester hydrolysis under acidic conditions is significantly influenced by the monolayer structure, i.e., the surface density of ester groups and length of the unsubstituted alkyl chains. In addition, we find that mixed omega-alkanoic acid/alkyl monolayers on silicon (prepared via hydrolysis) exhibit well-defined contact angle titration curves from which the surface acid dissociation constants were determined. The results were compared with the acid-base properties reported in the literature for carboxylic acid-terminated alkylsiloxane monolayers on hydroxylated silicon and for omega-mercaptoalkanoic acid/alkanethiolate monolayers on gold. The weak pKa dependence (deltapKa approximately 1) on the surface density of carboxylic acid groups and on the length of unsubstituted alkyl chains is attributed to variations of the microenvironment of the acid moieties. These experimental findings provide fundamental knowledge at the molecular level for the preparation of bioreactive surfaces of controlled reactivity on crystalline semiconductor substrates.
 ...
PMID:Structure and reactivity of mixed omega-carboxyalkyl/alkyl monolayers on silicon: ATR-FTIR spectroscopy and contact angle titration. 1596 96

This study assesses the effectiveness of CO2 laser in treating congenital melanocytic naevi (CMN). A retrospective review of 12 patients with CMN treated with CO2 laser was carried out. In all cases, there was minimal visible naevus after treatment. Six patients developed hypertrophic scarring; this was significantly more likely following CO2 laser treatment on the anterior torso, flanks, or arms than on the back or buttocks (P = 0.01, 1-tailed Fisher exact test). We conclude that CO2 laser is an effective treatment for reducing visible pigmentation of CMN. However, it can cause hypertrophic scarring, which has not been reported before. This risk can be reduced by limited use in areas of the body where the dermis is thinner or there is a known risk of hypertrophic scarring. In addition, the cautious use of paint mode and prophylactic use of pressure or silicon dressings may also reduce the risk of hypertrophic scarring.
 ...
PMID:Treatment of congenital melanocytic naevi with CO2 laser. 1643 39

A novel analytical method for analysis of microbial quinones in activated sludge sample was developed with improved reliability compared to the conventional method. The operating conditions for the extraction of quinones from activated sludge sample with a methanol-chloroform mixture and hexane were optimized. A solid phase extraction method using the Sep-Pak Plus Silica, a small column packed with silica gel, was employed for the purification and separation of quinones instead of column chromatography and thin layer column chromatography used in the conventional method. The analytical operation was simplified and the analytical time was shortened by a half or two-thirds of that required for the conventional method. The recoveries of quinones were markedly increased from 30-60% with the conventional method to as high as 90-101% with the improved method, demonstrating that the reliability of the analytical results of the improved method is significantly higher than that of the conventional method. The quinone content value obtained using the improved method was twice as high as that obtained using the conventional method for the same activated sludge sample, but the quinone profiles expressed as the mole fraction of each quinone type were the same for each method.
 ...
PMID:Development of a novel solid phase extraction method for the analysis of bacterial quinones in activated sludge with a higher reliability. 1623 85


1 2 3 4 5 6 Next >>