Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0027960 (mole)
 21,279 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The acidity constants of Alizarine Red S were determined spectrophotometrically at 25 degrees C and at constant ionic strength 0.1 M (KNO3) in pure water as well as in aqueous media containing variable mole percentages (5-70%) of organic solvents. The organic solvents used were methanol, ethanol, N,N-dimethyl formamide (DMF), dimethyl sulfoxide (DMSO), acetonitrile and dioxan. The acidity constants of all related equilibria are estimated using the whole spectral fitting of the collected data to an established factor analysis model. DATAN program was applied for determining of acidity constants and pure spectra of different form of Alizarine Red S. The obtained results indicated that acidity constants decrease as the content of an organic solvent in the medium increases. There are linear relationship between acidity constants and the mole fraction of various organic solvents in the solvent mixtures. Effect of various solvents on acidity constants and pure spectrum of each component are also discussed.
 ...
PMID:Spectrophotometric study of acidity constants of Alizarine Red S in various water-organic solvent. 1782 28

The rate at which equine and macaque ovarian tissue sections are first cooled from +25 degrees C to +4 degrees C has a significant effect on the measured water transport when the tissues are subsequently frozen in 0.85 M solutions of glycerol, dimethylsulfoxide (DMSO), or ethylene glycol (EG). To determine whether the response of ovarian tissues is altered if they are suspended in mixtures of cryoprotective agents (CPAs), rather than in solutions of a single CPA, we have now measured the subzero water transport from ovarian tissues that were suspended in mixtures of DMSO and EG. Sections of freshly collected equine and macaque ovaries were suspended either in a mixture of 0.9 M EG plus 0.7 M DMSO (equivalent to a mixture of approximately 5% vv of EG and DMSO) or in a 1.6M solution of only DMSO or only EG. The tissue sections were cooled from +25 degrees C to +4 degrees C and then frozen to subzero temperatures at 5 degrees C/min. As the tissues were being frozen, a shape-independent differential scanning calorimeter technique was used to measure water loss from the tissues and, consequently, the best fit membrane permeability parameters (L(pg) and E(Lp)) of ovarian tissues during freezing. In the mixture of DMSO+EG, the respective values of L(pg) and E(Lp) for equine tissue first cooled at 40 degrees C/min between +25 degrees C and +4 degrees C before being frozen were 0.15 microm/min atm and 7.6 kcal/mole. The corresponding L(pg) and E(Lp) values for equine tissue suspended in 1.6M DMSO were 0.12 microm/min atm and 27.2 kcal/mole; in 1.6M EG, the values were 0.06 microm/min atm and 21.9 kcal/mole, respectively. For macaque ovarian tissues suspended in the mixture of DMSO+EG, the respective values of L(pg) and E(Lp) were 0.26 microm/min atm and 26.2 kcal/mole. Similarly, the corresponding L(Lg) and E(Lp) values for macaque tissue suspended in 1.6M DMSO were 0.22 microm/min atm and 31.4 kcal/mole; in 1.6 M EG, the values were 0.20 microm/min atm and 27.9 kcal/mole. The parameters for both equine and macaque tissue samples suspended in the DMSO+EG mixture and first cooled at 0.5 degrees C/min between +25 degrees C and +4 degrees C were very similar to the corresponding values for samples cooled at 40 degrees C/min. In contrast, the membrane parameters of equine and macaque samples first cooled at 0.5 degrees C/min in single-component solutions were significantly different from the corresponding values for samples cooled at 40 degrees C/min. These results show that the membrane properties of ovarian cells from two species are different, and that the membrane properties are significantly affected both by the solution in which the tissue is suspended and by the rate at which the tissue is cooled from +25 degrees C to +4 degrees C before being frozen. These observations suggest that these variables ought to be considered in the derivation of methods to cryopreserve ovarian tissues.
 ...
PMID:Membrane transport properties of equine and macaque ovarian tissues frozen in mixtures of dimethylsulfoxide and ethylene glycol. 1788 94

The role of solute-solvent and solvent-solvent interaction on the preferential solvation characteristics of 2,6-diaminoanthraquinone (DAAQ) has been analysed by monitoring the optical absorption and fluorescence emission spectra. Binary mixtures consist of dimethylformamide (DMF)-ethanol (EtOH), DMF-dimelthylsulfoxide (DMSO), benzene (BZ)-DMF and acetonitrile (ACN)-DMF. The optical absorption spectra maximum and emission spectra maximum of DAAQ show the changes with varying the solvents and change in the composition in the case of binary mixtures. Non-ideal solvation characteristics are observed in all binary mixtures. It is found that at certain concentrations two mixed solvents interact to form a common structure with a nu(12) (wave number in cm(-1)) value not always intermediate (nu(1) and nu(2)) between the values of the solvents mixed. Synergistic effect is observed in the case of DMF-EtOH mixtures. The preferential solvation parameters local mole fraction X(2)(L), solvation index delta(S2), exchange constant K(12) are calculated in all binary mixtures expect in the case of DMF-BZ mixture and DMF-EtOH mixture in the ground state. We have also monitored excitation wavelength effect on the probe molecule in aprotic polar and protic polar solvents.
 ...
PMID:Study of preferential solvation of 2,6-diaminoanthraquinone in binary mixtures by absorption and fluorescence studies. 1791 71

Our earlier-established thermodynamic solvate difference rule encompasses thermodynamic relationships for the quantities P=DeltafH degrees, DeltafG degrees, DeltafS degrees, S degrees, Vm, and UPOT for pairs of condensed-phase solvates (including hydrates) having n and m moles, respectively, of bound solvent (including water, i.e., L=H2O), and can be written as P{MpXq.nL,p} approximately P{MpXq.mL,p}+(n-m).thetaP{L,p-p} (with m=0 for the corresponding thermodynamic quantity of the condensed-phase unsolvated parent, P{MpXq,p}), where thetaP{L,p-p} is the incremental contribution per mole of the bound solvent, L, to the property, P, of the solvate in condensed phase, p (where p=solid or liquid). We find that this rule can be extended to supercooled NaOH (and, probably, even more generally). Once established, the parameter thetaP{L,p-p} provides approximate values of the thermodynamic property, P, for the remaining solvates (hydrates) for which data are unknown. The difference rule is here further extended to heat-capacity data, Cp, for both hydrates and other solvates. For solid-phase hydrates, thetaCp{H2O,s-s} is determined to be 42.8 J K(-1) mol(-1). Further, the method is shown to apply also to the organic solvates, DMSO and DMF (the latter is based on a single example), leading to the (tentative) values thetaCp{DMSO,s-s} approximately 105 J K(-1) mol(-1) (at 255 K); approximately 161 J K(-1) mol(-1) (at 350 K), illustrating typical temperature dependence of the thetaCp values. thetaCp{DMF,s-s} approximately 84 J K(-1) mol(-1). For supercooled NaOH, thetaCp{NaOH,l-l}=77 J K(-1) mol(-1). The values of the solvate difference rule parameters provide us with insight into the bonding condition of the solvent molecule, leading to the conclusion that bound solvent water in an ionic environment is ice-like. The situation is more complex within zeolites because water may enter the solvate in a variety of ways. These latter considerations are also briefly discussed with respect to fullerenes.
 ...
PMID:The thermodynamic solvate difference rule: solvation parameters and their use in interpretation of the role of bound solvent in condensed-phase solvates. 1792 6

Aqueous solutions of dimethyl sulfoxide (DMSO) and acetone have been investigated using neutron diffraction augmented with isotopic substitution and empirical potential structure refinement computer simulations. Each solute has been measured at two concentrations-1:20 and 1:2 solute:water mole ratios. At both concentrations for each solute, the tetrahedral hydrogen bonding network of water is largely unperturbed, though the total water molecule coordination number is reduced in the higher 1:2 concentrations. With higher concentrations of acetone, water tends to segregate into clusters, while in higher concentrations of DMSO the present study reconfirms that the structure of the liquid is dominated by DMSO-water interactions. This result may have implications for the highly nonideal behavior observed in the thermodynamic functions for 1:2 DMSO-water solutions.
 ...
PMID:Investigations on the structure of dimethyl sulfoxide and acetone in aqueous solution. 1799 35

Solvation characteristics of 1,4-dihydroxy-2,3-dimethyl-9,10-anthraquinone (1) in pure and binary solvent mixtures have been studied by UV-vis absorption spectroscopy and laser-induced fluorescence techniques. The binary solvent mixtures used as CCl(4) (tetrachloromethane)-DMF (N,N-dimethylformamide), AN (acetonitrile)-DMSO (dimethylsulfoxide), CHCl(3) (chloroform)-DMSO, CHCl(3)-MeOH (methanol), and MeOH-DMSO. The longest wavelength band of 1 has been studied in pure solvents as well as in binary solvent mixtures as a function of the bulk mole fraction. The Vis absorption band maxima show an unusual blue shift with increasing solvent polarity. The emission maxima of 1 show changes with varying the pure solvents and the composition in the case of binary solvent mixtures. Non-ideal solvation characteristics are observed in all binary solvent mixtures. It has been observed that the quantity [nu (12)-(X(1)nu (1)+X(2)nu (2))] serves as a measure of the extent of preferential solvation, where nu and X are the position of band maximum in wavenumbers (cm(-1)) and the bulk mole fraction values, respectively. The preferential solvation parameters local mole fraction (X(2)(L)), solvation index (delta(s2)), and exchange constant (k(12)) are evaluated.
 ...
PMID:Solvatochromism and preferential solvation of 1,4-dihydroxy-2,3-dimethyl-9,10-anthraquinone by UV-vis absorption and laser-induced fluorescence measurements. 1835 95

The interaction between cis- and trans- RuCl(2)(DMSO)(4) and human serum albumin have been investigated through UV-Vis, circular dichroism, fluorescence spectroscopy and inductively couplet plasma atomic emission spectroscopy (ICP(AES)) method Albumin can specifically bind 1 mole of cis-isomer and 2 moles of the trans-isomer RuCl(2)(DMSO)(4) complex. The interaction of RuCl(2)(DMSO)(4) with HSA causes: a conformational change with the loss of helical stability of protein; the strong quenching of the Trp 214 fluorescence indicating that the conformational change of the hydrophobic binding pocked in subdomain IIA takes place; a local perturbation of the warfarin binding site and induce some conformational changes at neighbour domains, a changing of the binding abilities towards heme.
 ...
PMID:Interaction of Cis- and Trans-RuCl (2)(DMSO)(4) With Human Serum Albumin. 1847 61

Condensation of Cbz-Asp and PheOMe catalyzed by a neutral protease from Vibrio sp. T1800 (Vimelysin: VLN) was studied. VLN showed a relatively higher catalytic activity of condensation and an apparently larger yield after 3 h or 24 h, in comparison with thermolysin (TLN), especially at lower pH and temperatures.VLN showed higher solvent-tolerance than TLN. TLhe apparent highest yield (25%) was obtained in 30% DMSO by using VLN; under similar conditions, TLN gave only about a half of this value. The rate of the condensation reaction per mole of enzyme (v/[E](o)) in DMSO 50% at 37 degrees C and pH 6.5 was 0.16 s(-1) for VLN and 0.047 s(-1) for TLN. In 30% ethanol VLN showed more than three-fold peptide yield than TLN after 5 h reaction. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 53: 387-390, 1997.
 ...
PMID:Peptide condensation activity of a neutral protease from Vibrio sp. T1800 (Vimelysin). 1863 27

The molar transition energy (E(T)) polarity values for the solvatochromic probes 2,6-diphenyl-4-(2,4,6-triphenylpyridinium)phenolate (1), 4[(1-methyl-4-(1H)-pyridinylidene)-ethylidene]-2,5-cyclohexadien-1-one (2), and 4-[4-(dimethylamino)styryl]-1-methylpyridinium iodide (3) were collected in binary mixtures comprising chloroform and a hydrogen-bond accepting (HBA) solvent [dimethyl sulfoxide (DMSO), N,N-dimethylformamide (DMF), N,N-dimethylacetamide (DMA), acetone or acetonitrile], aiming to investigate the ability of the chlorinated component to act as hydrogen-bond donating (HBD) solvent. Plots of E(T) as a function of X(2), the mole fraction of chloroform, were obtained and the data were analysed to investigate the preferential solvation (PS) of each probe in terms of both solute-solvent and solvent-solvent interactions. For dyes 1 and 2 a strong synergistic behavior was observed for all mixtures studied, indicating that the dyes are preferentially solvated by complexes formed through hydrogen bonding between chloroform and the HBA component in the mixtures. A study of 1 in deuterated chloroform with an HBA component (DMF and DMA) demonstrated that while almost no differences occur with the DMF mixtures, the presence of deuterated chloroform in its mixtures with DMA increases the synergistic effect, suggesting that it interacts more strongly with DMA, making its mixtures more polar. These data were successfully fitted to a model based on solvent-exchange equilibria. The features of the mixtures with dye 3 revealed a very different profile in comparison with the other two dyes, which suggests that in mixtures containing chloroform, the microenvironment of the dye seems to be important in determining the contribution of the structure resonances responsible for the stability of the dye.
 ...
PMID:Merocyanine solvatochromic dyes in the study of synergistic effects in mixtures of chloroform with hydrogen-bond accepting solvents. 1867 25

A simple and precise preconcentration technique, based on collecting a precipitate on a membrane filter and dissolving the filter and precipitate in an organic solvent, has been applied to the spectrophotometric determination of trace sulphate in rain and snow. The sulphate is precipitated with 2-aminoperimidine and the resulting compound is dissolved in nitric acid, made alkaline with sodium hydroxide and then adsorbed on tetradecyldimethylbenzylammonium nitrate. The precipitate is then collected on a membrane filter and both precipitate and filter are dissolved in dimethylsulphoxide (DMSO). The absorbance of the DMSO solution is measured at 550 nm against a reagent blank. The molar absorptivity is 2.1 x 10(4) 1 . mole(-1) . cm(-1) and the coefficient of variation for six measurements is < 1.5%. The detection limit (S/N = 3) is 0.06 mug of sulphate in 5 ml of sample solution.
 ...
PMID:Spectrophotometric determination of trace sulphate in rain and snow after preconcentration with 2-aminoperimidine on a membrane filter. 1896 91


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>