Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0027960 (mole)
 21,279 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

Terminal-incorporation of hydrophilic or hydrophobic groups dramatically influences the phase transition of poly(N-isopropylacrylamide) (PIPAAm) because of a critical role of the polymer chain ends in initiation of the phase transition. Incorporation of an amino or hydroxyl group to one end of PIPAAm remarkably raised the LCST (lower critical solution temperature) and slowed down the rate of the phase transition, and these effects were more pronounced as the mole fraction of hydrophilic groups increased compared to the random copolymers of PIPAAm and hydrophilic co-monomers, such as acrylic acid (AAc) or dimethylacrylamide (DMAAm). Hydrophilic effects were more remarkable for hydroxyl groups, due to stronger hydrogen bonding with water. Terminal-modification (hydrophobization) was also more effective in producing hydrophobic effects on the PIPAAm phase transition in comparison with PIPAAm copolymers that were randomly modified along the main chain with hydrophobic co-monomers. Moreover, terminal-located hydrophobic groups were able to form hydrophobic microdomains that were clearly isolated from PIPAAm chains in aqueous media by the aggregation of hydrophobic segments. As a result, the obtained micellar aqueous solution showed the same LCST as pure PIPAAm, while the PIPAAm random copolymer with hydrophobic co-monomers formed incompletely separated microdomains. The LCST for this random copolymer was reduced with increasing hydrophobic co-monomer mole fraction. Hydrophobically terminal-modified PIPAAm produced thermo-responsive core-shell structures that exhibited the same LCST and the same thermal response rate as those of free linear PIPAAm chains. Such polymeric micellar structures show reversible thermoresponsive aggregation/dispersion and deformation/reformation in heating/cooling cycles through the LCST for pure PIPAAm. These properties indicate the possibility of using such a system as a thermoresponsive drug carrier with double targeting mechanisms, in both passive and active manners.
 ...
PMID:Effect of molecular architecture of hydrophobically modified poly(N-isopropylacrylamide) on the formation of thermoresponsive core-shell micellar drug carriers. 974 19

This study was carried out to engineer N-isopropylacrylamide (NiPAM) polymers that contain protein-reactive N-acryloxysuccinimide (NASI) and hydrophobic alkylmethacrylates (AMAs). These thermoreversible, protein-conjugating polymers hold potential for retention of therapeutic proteins at an application site where tissue regeneration is desired. The lower critical solution temperatures (LCST) of the polymers were effectively controlled by the AMA mole content. The AMAs with longer side-chains were more effective in lowering the LCST. Polymers without NASI exhibited a stable LCST in phosphate buffer and in serum over a 10-day study period. The LCST of polymers containing NASI was found to increase over time in phosphate buffer, but not in serum-containing medium. The LCST increase in phosphate buffer was proportional to the AMA content. The feasibility of localizing a therapeutic protein, recombinant human bone morphogenetic protein-2 (rhBMP-2), to a site of application was explored in a rat intramuscular injection model. The results indicated that polymers capable of conjugating to rhBMP-2 were most effective in localizing the protein irrespective of the LCST (13-25 degrees C). For polymers with no NASI groups, a lower LCST resulted in a better rhBMP-2 localization. We conclude that thermosensitive polymers can be engineered for delivery of therapeutic proteins to improve their therapeutic efficacy.
 ...
PMID:Engineering temperature-sensitive poly(N-isopropylacrylamide) polymers as carriers of therapeutic proteins. 1134 56

The spheroid of specific cells is often regarded as the better form in artificial organs and mammalian cell bioreactors for improved cell-specific functions. In this study, freshly harvested primary rat hepatocytes, which had been cultivated as spheroids and entrapped in a synthetic thermo-reversible extracellular matrix, were examined for differentiated morphology and enhanced liver-specific functions as compared to a control set (hepatocytes in single-cell form). A copolymer of N-isopropylacrylamide (98 mole % in the feed) and acrylic acid (poly(NiPAAm-co-AAc)), and the adhesion molecule, an Arg-Gly-Asp (RGD)-incorporated thermo-reversible matrix, were used to entrap hepatocytes in the form of either spheroids or single cells. In a 28-day culture period, the spheroids in the RGD-incorporated gel maintained higher viability and produced albumin and urea at constant rates, while there was lower cell viability and less albumin secretion by the spheroids in p(NiPAAm-co-AAc). Hepatocytes cultured as spheroids in the RGD-incorporated gel would constitute a potentially useful three-dimensional cell system for application in a bio-artificial liver device.
 ...
PMID:Phenotype of hepatocyte spheroids in Arg-GLY-Asp (RGD) containing a thermo-reversible extracellular matrix. 1222 30

A series of thermoresponsive ternary random copolymers, poly[N-isopropylacrylamide (PIPAAm)-co-(dimethylamino)ethylmethacrylate (DMAEMA)-co-butylmethacrylate (BMA)], was synthesized and their in vitro gene transfection efficiency in cell culture was evaluated. A control copolymer containing 20 mol% DMAEMA units, IP-20D (mole ratio of IPAAm/DMAEMA/BMA=80/20/0 in feed, no BMA units) was inert in transfection. In contrast, copolymer IP-20D-10B (IPAAm/DMAEMA/BMA=70/20/10 in feed) effectively transfected plasmid DNA into COS-1 cell cultures even under small dosing conditions of 0.1 microg of plasmid DNA per well in a 96-well plate, suggesting that incorporation of the appropriate amount of hydrophobic unit is crucial to transfection efficiency. Gene expression was much more significant when transfected by the IP-20D-10B carrier in comparison with control homopolymer poly-DMAEMA, and almost equal to that of the highly competent lipid carrier, LipofectAMINE PLUS trade mark. Furthermore, the transfection efficiency of IP-20D-10B is altered in a thermally responsive manner. By temporarily lowering the cell culture incubation temperature to 20 degrees C in the posttransfection period, gene expression doubled over that for incubation temperature at 37 degrees C. The DNA EtBr intercalation assay suggested that DNA affinity for IP-20D-10B is decreased by lowering incubation temperature, implying that the thermally regulated gene expression could provide more efficient DNA release from the polymeric carrier.
 ...
PMID:Temperature-responsive polymeric carriers incorporating hydrophobic monomers for effective transfection in small doses. 1498 Jul 82

In this paper, we have investigated the lower critical solution temperature (LCST) of N-isopropylacrylamide-acrylic acid (NIPAAm-AAc) copolymer as a function of chain-transfer agent/initiator mole ratio, acrylic acid content of copolymer, concentration, pH and ionic strength of aqueous copolymer solution. Aqueous solutions with the desired properties were prepared from previously purified polymers, synthesized at 65 degrees C by solution polymerization using ethanol. The effects of each parameter on the LCST were examined experimentally. In addition, an artificial neural network model that is able to predict the lower critical solution temperature was developed. The predictions from this model compare well against both training and test data sets with an average error less than 2.53%.
 ...
PMID:Prediction of lower critical solution temperature of N-isopropylacrylamide-acrylic acid copolymer by an artificial neural network model. 1559 89

Copolymers of N-isopropylacrylamide, 2-hydroxyethyl methacryl lactate [(HEMA)-lactate] and acrylic acid (AAc) were prepared with varying mole ratios of monomers to develop copolymers with gelation properties above a certain concentration for a bioerodible, in-situ gelling material. The copolymers formed gels in situ under physiological condition. The gelation temperature of the copolymers decreased as the HEMA-lactate content of the copolymers increased due to the hydrophobicity of HEMA-lactate, and increased as the AAc content increased due to the hydrophilicity of AAc. The gels redissolve at 37 degrees C as their LCSTs increase above 37 degrees C due to the hydrolysis of the HEMA-lactate pendant groups.
 ...
PMID:In situ-gelling, erodible N-isopropylacrylamide copolymers. 1599 39

Surface modification of colloidal silica with ferrocenyl-grafted polymer and colloidal crystallization of the particles in organic solvent were studied. Poly(methyl methacrylate-co-vinylferrocene)-grafted silica never formed colloidal crystals in polar solvent, such as acetone, acetonitrile, ethanol and N,N-dimethylformamide (DMF), while poly(methyl methacrylate-co-ferrocenyl acrylate)-grafted silica gave colloidal crystallization in DMF. The particles prepared by grafting of poly(N,N-dimethylacrylamide-co-vinylferrocene), with vinylferrocene (Vfc) mole fraction of 1/13 and 1/23, were observed to give the crystallization in ethanol and DMF over particle volume fraction of 0.058. Further, silica modified with copolymer of Vfc and N-vinyl-2-pyrrolidone, N-vinylcarbazole or N-isopropylacrylamide formed colloidal crystals in ethanol and DMF. Especially, poly(N-isopropylacrylamide-co-Vfc)-grafted silica, which was composed of the highest mole fraction of vinylferrocene, 1/3, afforded colloidal crystallization in ethanol over particle volume fraction of 0.053. Relatively high polar vinylferrocene copolymer grafting of silica resulted in colloidal polymerization in organic solvents.
 ...
PMID:Colloidal crystallization of colloidal silica modified with ferrocenyl group-contained polymers in organic solvents. 1712 37

A new method has been developed to prepare smart copolymer microgels that consist of well defined temperature sensitive cores and pH sensitive shells. The microgels were obtained from N-isopropylacrylamide (NIPAAm) and acrylic acid (AAc), containing different mole ratios of AAc. Transmission electron micrographs of the microgels show that the colloidal copolymers are nearly monodisperse spheres (core-shell structures). The lower critical solution temperatures (LCSTs) (or phase separation temperatures) of the aqueous microgel solutions were measured by cloud-point method. At slight acidic conditions, the LCST decreased with increase in AAc content, which suggests that the hydrophobic group of NIPAAm has a greater influence on the LCST than the polar COOH group at those conditions. An increase of pH value leads to a significant increase in LCST due to the formation of a more hydrophilic copolymer. The LCST were studied as a function of copolymer composition over the pH range from 4.0 to 6.5. Because the pK(a) of the polymers can be tuned to fall close to neutral pH, these polymer compositions can be dispersed to have phase transitions triggered near physiological pH or at slight acidic pH values that fall within acidic gradients found in biology. Because of their stimuli-responsive behavior, these nanoscale materials are excellent candidates for biotechnology and biomedical applications where small changes in pH or temperature are of great consequence.
 ...
PMID:Preparation and characterization of N-isopropylacrylamide/acrylic acid copolymer core-shell microgel particles. 1756 Oct 67

The objective of this work was to create an in situ physically and chemically cross-linking hydrogel for in vivo applications. N-Isopropylacrylamide (NIPAAm) was copolymerized with N-acryloxysuccinimide (NASI) via free radical polymerization. Poly(NIPAAm-co-NASI) was further modified to obtain poly(NIPAAm-co-cysteamine) through a nucleophilic attack on the carbonyl group of the NASI by the amine group of the cysteamine. Modification was verified by nuclear magnetic resonance. In addition to thermoresponsive physical gelling due to the presence of NIPAAm, this system also chemically gels via a Michael-type addition reaction when mixed with poly(ethylene glycol) diacrylate. The presence of both physical and chemical gelation resulted in material properties that are much improved compared to purely physical gels. The chemical gelation time of the copolymers was not significantly affected by the amount of thiol present due to the increased pKa of the copolymer containing more thiols. In addition, the swelling of the copolymers was highly dependent on the temperature and thiol content. Last, the rate of nucleophilic attack in the Michael-type addition reaction was shown to be highly dependent on pH and on the mole ratio of thiol to acrylate. Due to the improved mechanical properties, this material may be better suited for long-term functional replacement applications than other thermosensitive physical gels. With further development and biocompatibility testing, this material could potentially be applied as a temperature-responsive injectable biomaterial for functional embolization.
 ...
PMID:Simultaneously physically and chemically gelling polymer system utilizing a poly(NIPAAm-co-cysteamine)-based copolymer. 1756 67

This study presents a method to measure the contact angles of oils on a substrate in water. Diiodomethane and perfluorodecalin were used as model oils. Self-assembled monolayers (SAMs) were prepared by adjusting the mole ratio of CH 3- and OH-terminated alkanethiols. The contact angles of the two oils in water increased with increasing hydrophilicity of the SAMs, and the results are contrasted with the contact angles of oils on these surfaces in air. In addition, perfluorodecalin showed higher contact angles than diiodomethane on the same surface. On the poly(N-isopropylacrylamide) (PNiPAAM) monolayer surface, the contact angles of the two oils in water decreased sharply at the transition temperature of PNiPAAM (approximately 30 degrees C), but the surface retained fairly high hydrophilicity even after the transition. The above results are correlated with atomic force microscopy (AFM) measurements of the adhesion force between protein-immobilized AFM tips (human fibrinogen and bovine serum albumin) and these monolayers.
 ...
PMID:Contact angles of oils on solid substrates in aqueous media: correlation with AFM data on protein adhesion. 1871 87


1 2 3 Next >>