Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0027819 (neuroblastoma)
 27,800 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The urine level of trace elements has been investigated in some normal adults under different workplace environments in Bangladesh. The samples were collected from 58 subjects, randomly selected from about 500 adults working in 10 different workshops and factories located in Dhaka city. Samples were analyzed by the external beam PIXE method. Proton beams of 2.5 MeV energy and 20 nA intensity were used for sample irradiations. For 40 microC irradiations, the concentration of 14 elements in total (K, Ca, Ti, Cr, Mn, Fe, Ni, Cu, Zn, As, Br, Rb, Sr and Mo) in different groups were measured by comparison with a calibration curve obtained from the NBS Orchard Leaf standard (SRM 1571). The results from different workplaces are reported in terms of amount of excretion per unit volume of the sample collected. They, however, do not reflect the total daily excretion level of different subject groups.
 ...
PMID:Urine level of trace elements in some adults in Bangladesh under a workplace environment. 215 44

Wall correction factors, which correct ion chamber response for photon attenuation and scatter, can differ by as much as 1.0% for spherical chambers depending on whether they are obtained experimentally by extrapolation measurements or by Monte Carlo simulation. This difference is not explained by experimental or calculational statistics which lie in the range 0.05%-0.2%. In this paper it is demonstrated that linear extrapolation of experimental data for spherical chambers is inappropriate, owing to the curvature of the chamber walls. A simple nonlinear theory is constructed that resolves the difference. The Monte Carlo calculations and the nonlinear theory are compared with extrapolation measurements for the NIST (formerly NBS) spherical chambers. It is concluded that wall correction factors should be obtained by Monte Carlo calculation for spherical chambers and that linear-extrapolation techniques should be regarded with suspicion for all chambers.
 ...
PMID:On the technique of extrapolation to obtain wall correction factors for ion chambers irradiated by photon beams. 221 3

Separation and determination of sample constituents by capillary isotachophoresis are entirely based on physical phenomena. The method has therefore been proposed as a universal reference method for ionic constituents. The present paper shows that even neutral species can be adequately determined after suitable preceding reactions. Urea was completely hydrolysed by urease (EC 3.5.1.5) to ammonia and bicarbonate, followed by direct measurement of the ammonium ion concentration by capillary isotachophoresis. Standard Reference Material No. 912a urea (National Bureau of Standards) was used as a primary standard. The analytical linear range of the method extends to 64 mmol urea per litre. The precision of the method was in the range of 1.05-2.64% (CV) and the analytical recovery of added urea was excellent (99.4%, SD 1.13%). Further proof of accuracy was obtained by analysing the NBS human reference serum (standard reference material 909). The mean result by the capillary isotachophoretic method, 9.52 +/- 0.085 mmol/l, agrees well with the reference value, 9.64 mmol/l. The results obtained by capillary isotachophoresis showed good agreement with those obtained by the coupled-enzyme method (r = 0.995).
 ...
PMID:Isotachophoretic determination of urea-ammonium in plasma: a candidate reference method. 223 Jun 62

A subunit of molecular weight 21,000 from arachin, the major peanut protein, was isolated in pure form and primary structure was determined. The subunit was fragmented with CNBr, trypsin, and NBS; the fragments were separated and isolated by PAGE, gel filtration, Dowex treatment, and paper electrophoresis, and Edman degradation on each fragment, including the intact subunit, was performed. The PTH-amino acids thus obtained were identified by UV spectroscopy and TLC. The complete sequence of 176 residues was established by overlapping technique.
 ...
PMID:Complete amino acid sequence of arachin subunit of molecular weight 21,000. 237 66

Histone H1t has been purified from rat testes and antibodies were elicited in rabbits. Immunoblotting studies with anti-histone H1t-IgG have shown that it reacted specifically with histone H1t but not with other histone H1 subtypes, namely H1a, -b, -c, -d, -e and H10. The anti-histone H1t-IgG also did not react with chicken erythrocyte histone H5. Immunoblotting studies have also revealed that the polyclonal anti-histone H1t-IgG reacted with (a) two polypeptide fragments, NBS-N and NBS-C, derived from N-bromosuccinimide cleavage of histone H1t, (b) two polypeptide fragments, CT-N and CT-C, derived from alpha-chymotrypsin cleavage of histone H1t, and (c) GH1t, globular domain of histone H1t obtained after trypsin cleavage. The indirect immunofluorescence studies on nuclei isolated from adult rat testes with anti-histone H1t-IgG showed that the fluorescence, particularly, of the pachytene nucleus was the brightest. On the other hand, anti-histone H1t-IgG did not stain nuclei from either liver or nuclei isolated from the testes of 10-day-old rats.
 ...
PMID:Testis-specific histone H1t is antigenically distinct among H1 subtypes. 241 27

The sensitivity and selectivity of high-resolution gas chromatography/mass spectrometry in the negative ion chemical ionization mode with methane as reagent gas was evaluated for the characterization of polar substituted polycyclic aromatic compounds (PAC). The fragmentation patterns were affected by the nature of the substituent for polar substituted nitro-PAC that showed detection limits of 50 pg at full-scan acquisition. This technique has been applied to the characterization of polar high-performance liquid chromatographic fractions of diesel exhaust particulate (NBS Standard Reference Material 1650) and enabled the identification of 20 PAC of different chemical classes. Among them, hydroxynitro-, dinitro- and nitrosubstituted secondary amines were identified for the first time in diesel exhaust particulate. In addition, 'filament-on' thermospray (TSP) liquid chromatography/mass spectrometry (LC/MS) with positive and negative ions have been used for the characterization of similar polar compounds such as 2-nitroquinoline, 1,8-naphthalic anhydride, naphthalene sulphonic acid and 1,2-hydroxynitronaphthalene. LC analyses were performed on a reversed-phase system using either acetonitrile-water or methanol-water with 0.1 M ammonium acetate and 1% acetic acid as eluent. With negative ion TSP LC/MS a four- to fivefold loss in sensitivity was observed for naphthalene sulphonic acid compared with nitrohydroxy-PAC, that showed a minimum detectable amount of 50 ng in the reconstructed ion chromatogram.
 ...
PMID:Characterization of polar substituted polycyclic aromatic compounds using high-resolution gas chromatography/mass spectrometry negative ion chemical ionization and positive and negative ion thermospray liquid chromatography/mass spectrometry. 246 74

This study was made to compare the physical and chemical properties of amalgam with those of gallium alloy in which the invented liquid alloy containing the three fundamental components of Ga-Sn-In or Ga-Sn-In-Ag were used instead of mercury. Experiment 1. The physical and chemical properties were investigated after the liquid gallium alloy and high copper amalgam powder were mixed. The following results were obtained; 1) The invented gallium alloy group showed expansion in dimensional changes immediately after mixing. This alloy group showed the same compressive and diametral tensile strength as those in amalgam after 7 days. 2) This alloy group showed slightly more corrosion weight loss in 0.05% HCl and 1% lactic acid solutions than that in amalgam, but this alloy group showed the same corrosion weight loss in 1% NaCl solution and artificial saliva as in amalgam. Also this alloy group showed more discoloration (delta E, NBS) in 0.1% Na2S solution than that in amalgam, but this showed the same degree of discoloration in artificial saliva. Experiment 2. The physical and chemical properties were investigated after the same liquid gallium alloy and Ag-Pd-Sn-Cu-Zn alloy powder were mixed. The following results were obtained; 1) The invented gallium alloy group showed expansion in dimensional changes immediately after mixing. This showed superior quality in compressive and diametral tensile strength as compared with those of amalgam. 2) The invented gallium alloy showed slightly more corrosion weight loss in 0.05% HCl and 1% lactic acid solutions than that in amalgam, but this alloy group showed the same corrosion weight loss in 1% NaCl solution and artificial saliva as in amalgam. Also this alloy group showed more discoloration (delta E, NBS) in 0.1% solution than that in amalgam, but it was the same in artificial saliva.
 ...
PMID:[A basic study on gallium alloys for dental restorations. Improvement of liquid gallium alloy]. 248 4

In collaboration with the National Heart, Lung, and Blood Institute, the CDC has supported programs for standardizing lipid measurements for more than 30 years. These programs were begun because comparable and accurate quantitative measurements were needed for epidemiologic studies of coronary heart disease. Since the first program was initiated, over 500 national and international laboratories have participated in the various CDC lipid standardization programs. The cornerstone of these standardization programs has been an accuracy base of lipid reference materials and methods developed by CDC. Specifically, CDC has developed human, serum-based reference materials for cholesterol, HDL, triglyceride, and apolipoproteins A-I and B and reference methods for total cholesterol, HDL, and triglyceride. The CDC reference method for cholesterol has been adopted as the national reference method for cholesterol by the National Reference System for the Clinical Laboratory Council of the National Committee for Clinical Laboratory Standards. The approved CDC reference method along with an approved NBS definitive method, an approved NBS certified Reference Material, and the CDC certified serum-based secondary reference materials make up the accuracy base for serum cholesterol measurements in the United States, and together they are recognized as the National Reference System for Cholesterol. The NCEP Laboratory Standardization Panel recommends that cholesterol measurements made by all clinical laboratories should be standardized so that cholesterol values are traceable to the National Reference System for Cholesterol. In support of the NCEP's efforts, CDC will establish a standardization program permitting the laboratory and manufacturing community to trace cholesterol measurements and the development of cholesterol diagnostic products back to the national reference system. The major emphasis of this standardization effort is to establish a network of reference method laboratories (1) to assign cholesterol values to all commercially prepared lots of calibrators and control materials and (2) to provide reference measurements on individual "fresh" human serum specimens to manufacturers and clinical laboratories. CDC is also working to (1) provide reference materials to manufacturers, (2) collaborate with NBS to maintain documentation of the national reference system accuracy base, (3) cooperate with proficiency testing organizations to assist in the accurate labeling of reference materials, and (4) provide training and education pertinent to cholesterol standardization.(ABSTRACT TRUNCATED AT 400 WORDS)
 ...
PMID:The Centers for Disease Control-National Heart, Lung and Blood Institute Lipid Standardization Program. An approach to accurate and precise lipid measurements. 253 92

A microwave acid decomposition technique was evaluated for decomposing biological standard reference materials (NBS oyster tissue and bovine liver) for trace metal analyses. Dissolution consisted of HNO3 decomposition in a closed Teflon bomb. A microwave oven was used as the heat source. Complete decomposition times were less than 1 min. Resulting solutions were analyzed by atomic absorption spectrophotometry for Cd, Cu, Fe, Pb, and Zn. Recoveries were estimated by comparison with National Bureau of Standards certified values. The precision and accuracy of the results ranged from 1 to 13% and 93 to 106%, respectively.
 ...
PMID:The rapid decomposition of biological materials by using a microwave acid digestion bomb. 254 Mar 84

A modification of a Dionex System 12 ion chromatograph is described which enables organic anions (acetate and formate), inorganic cations (ammonium, sodium and potassium) and inorganic anions (chloride, nitrate and sulphate) to be determined sequentially in one measuring procedure. The modified instrument consists of a programmable controller unit, a conductimetric meter, two conductimetric detectors of the Dionex System 12 ion chromatograph, the HPIC-AS4A and HPIC-CS3 modern separation units, AMMS-1 and CMMS-1 micro-membrane suppressor columns, a unique system of valves from Dionex and two dual pumps from Biotronik. The limits of detection are between about 1 and 3 micrograms/l for chloride, nitrate and sulphate and between about 2 and 10 micrograms/l for acetate, formate, ammonium, sodium and potassium. The reliability of the method was demonstrated by analysing two NBS simulated rain water Standard Reference Materials. Some examples are given of the application of the method to the sequential determination of the main precipitation components in typical samples from urban and rural regions of the F.R.G. The ion concentrations varied between about 0.02 and 300 mg/l.
 ...
PMID:Modification of a Dionex System 12 ion chromatograph for sequential determination of the main components in atmospheric precipitation. 260 Jan 53


<< Previous 1 2 3 4 5 6 7 8 9 10 Next >>