Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0016382 (flushing)
 6,387 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

The technical feasibility and performances of coupling flushing abilities of cyclodextrin solutions for 2,4,6-trinitrotoluene (TNT) removal from contaminated soil and the ability of Photo-Fenton treatment for final disposal of soil extract solutions containing high TNT loads have been investigated at laboratory scale. Methylated-beta-cyclodextrin (MCD) has shown better ability than hydroxypropyl-beta-cyclodextrin (HPCD) to complex TNT. The MCD solution increased the aqueous concentration of TNT in soil extract effluents as much as 2.1 times the concentrations obtained during the water flush of the soil. TNT in soil extract solution has been treated by Photo-Fenton. Our results indicate that MCD has a beneficial effect on the degradation rates of TNT. This relative improvement of TNT degradation rate (1.3 time) in presence of high amounts of hydroxyl radical scavengers can be ascribed to the formation of a ternary complex (TNT-cyclodextrin-iron) which can direct hydroxyl radical reaction toward TNT. Complete mineralization of soil extraction solutions was not achieved and TNT degradation pathway has been elucidated in order to ensure that no potential toxic intermediate is left at the end of the treatment time. After successive TNT hydroxylations, oxidative opening of the TNT aromatic ring quickly occurred, leading to the accumulation of short chain carboxylic acids such as oxalic acid and formic acid.
 ...
PMID:Photo-Fenton treatment of TNT contaminated soil extract solutions obtained by soil flushing with cyclodextrin. 1600 44

The optimum conditions for the recovery of copper from a contaminated soil by using the soil flushing technique are evaluated. Tests on a soil artificially contaminated with copper chloride were carried out in order to evaluate the influence of the speed of percolation and of the chelating agent concentration (aqueous solution of an ethylendiaminotetraacetic acid di-sodium salt Na2-EDTA). At pH=7.3 an efficiency up to 93.9% for copper extraction was achieved by flushing 500 ml of Na2-EDTA 0.05 M solution and 100 ml of pure water at 0.792 cm/h. At these operating conditions the formation of EDTA complexes with other competitive cations (calcium and iron) was negligible. The experimental results were in agreement with the ones obtained using a model describing the chemistry of metal extraction. This model assessed that above pH=6 the formation of calcium and iron EDTA complexes was excluded and only the chelation of copper was allowed. The recovery of 91.6% of EDTA was also achieved by evaporating and acidifying the extracted solution: after filtration, solid EDTA was obtained, through the addition of sodium hydroxide Na2-EDTA. About 99.5% of the extracted copper was finally precipitated under alkaline conditions from the liquid phase.
 ...
PMID:Heavy metals extraction from contaminated soil: recovery of the flushing solution. 1604 35

Although Lebanon has abundant water, its rivers are polluted and aquifer water mismanaged. Effective river water usage requires an understanding of the geochemistry of polluting metals in catchments. Climate is "Mediterranean": wet winters and dry summers. Active sediment flushing is restricted to winter high discharge episodes. Except in winter, water column pollutants are removed by precipitation or sorption to the surface of static bed sediments. Hence (1) does winter flushing of contaminated sediment and replacement by clean sediment favour self purification? (2) does the distribution of metals between extractable fractions change seasonally and thereby affect metal bioavailability ? Results on the distribution of metals are reported for Fe, Pb, Zn, Cu and Cd in bed sediments from Nahr Ibrahim (a karstic river) for summer and winter. A Tessier-like sequential extraction scheme was applied to samples (< 75 microm) for five locations along a 13 km stretch to the sea. Water pH was above 8.2 at all locations implying a very low solubility for Fe. Sediment was derived from catchment soils and limestone. Total sediment Fe increased in winter at all sites following deposition of eroded soil from upstream. Cadmium, Cu and Pb derived from polluting sources; the sources of Zn were more complex. Dilution by clean sediment explained winter reductions in total Cd, Cu and Pb; Zn changes were less consistent. Iron occurred mostly (> 77 sum of fractions) in the residual fraction compared with 6- 31 for pollutants; residual Cu and Zn showed a small increase in winter whereas Cd and Pb did not change. All readily exchangeable metals decreased in winter and the carbonate bound forms predominated in both seasons. Nahr Ibrahim has a high capacity for self purification and metal resolubilization from sediment will be limited by the solubility of carbonate forms.
 ...
PMID:Seasonal variations of trace metal chemical forms in bed sediments of a karstic river in Lebanon: implications for self-purification. 1623 95

The bulk of arsenic (As) at contaminated sites is frequently associated with iron (hydr)oxides. Various studies ascribe increasing dissolved As concentrations to the transformation of iron (hydr)oxides into iron sulfides, which is initiated by dissolved sulfide. We investigated whetherthis processes can be utilized as a source treatment approach using compost-based permeable reactive barriers (PRB), which promote microbial sulfate reduction. Arsenic-bearing aquifer sedimentfrom a contaminated industrial site showed a decrease in As content of <10% after 420 days of percolation with sulfide-free artificial groundwater. In contrast, water that had previously passed through organic matter and exhibited sulfide concentrations of 10-30 mg/L decreased As content in the sediment by 87% within 360 days. X-ray diffraction showed no arsenic sulfides, but XANES spectra (X-ray absorption near edge structure) and associated linear combinations revealed that adsorbed arsenate of the original sediment was in part reduced to arsenite and indicated the formation of minor amounts of a substance that contains As and sulfur. The speciation of dissolved As changed from initially As(V)-dominated to As(III)-dominated after sulfide flushing was started, which increases the mobility of As. Because sulfide can be supplied not only by compost-based PRBs but also by direct injection, sulfide flushing has a wide range of application for the source treatment of arsenic.
 ...
PMID:Compost-based permeable reactive barriers for the source treatment of arsenic contaminations in aquifers: column studies and solid-phase investigations. 1624 39

This study applied multivariate factorial kriging to derive the characteristics of the spatial variations of groundwater arsenic distributions at different scales on the ChiaNan floodplain, Taiwan. Seven variables (dissolved oxygen, oxidation-reduction potential, alkalinity, sulfate, iron cations, manganese cations and total organic carbon) and Arsenic were adopted to analyze the mechanisms of arsenic enrichments in groundwater. The hydrogeological environment had spatial and quantitative influences on arsenic enrichments at different scales. The regional scale was set to 32 km referring to the extension distance of flow paths to reflect the effects of flushing in the aquifer, while the local scale was set to 16 km referring to the farthest distance of seawater intrusion to determine the influence of seawater intrusion. The results of factorial kriging suggested that arsenic releases resulted partially from pyrite oxidation during the flushing at the regional scale and partially due to the siderite dissolution at the local scale. Overall, the alkalinity dominated arsenic distribution in groundwater at both the regional and local scales. The multivariate factorial kriging results also demonstrated that seawater intrusion slightly affected the increase of arsenic in groundwater, accounting for only 17.3% of total variation. However, the interaction of seawater intrusion and arsenic distribution in space indicated that seawater intrusion restrained the distribution of arsenic from the areas where seawater was located. High dissolved oxygen was found at where over-pumping induced drawdown cones occurred and also limited the spatial variation of arsenic. Our findings indicate that multivariate factorial kriging can be a useful mapping tool to improve understanding of the mechanism of arsenic release in groundwater at different scales. And the results conducted from the application of multivariate factorial kriging in southwestern Taiwan reveal the important influences of the hydrogeological processes, either artificial or natural, on the arsenic variations in groundwater.
 ...
PMID:Mapping of spatial multi-scale sources of arsenic variation in groundwater on ChiaNan floodplain of Taiwan. 1690 65

Smoking causes a variety of adverse effects on organs that have no direct contact with the smoke itself such as the liver. It induces three major adverse effects on the liver: direct or indirect toxic effects, immunological effects and oncogenic effects. Smoking yields chemical substances with cytotoxic potential which increase necro-inflammation and fibrosis. In addition, smoking increases the production of pro-inflammatory cytokines (IL-1, IL-6 and TNF- alpha) that would be involved in liver cell injury. It contributes to the development of secondary polycythemia and in turn to increased red cell mass and turnover which might be a contributing factor to secondary iron overload disease promoting oxidative stress of hepatocytes. Increased red cell mass and turnover are associated with increased purine catabolism which promotes excessive production of uric acid. Smoking affects both cell-mediated and humoral immune responses by blocking lymphocyte proliferation and inducing apoptosis of lymphocytes. Smoking also increases serum and hepatic iron which induce oxidative stress and lipid peroxidation that lead to activation of stellate cells and development of fibrosis. Smoking yields chemicals with oncogenic potential that increase the risk of hepatocellular carcinoma (HCC) in patients with viral hepatitis and are independent of viral infection as well. Tobacco smoking has been associated with suppression of p53 (tumour suppressor gene). In addition, smoking causes suppression of T-cell responses and is associated with decreased surveillance for tumour cells. Moreover, it has been reported that heavy smoking affects the sustained virological response to interferon (IFN) therapy in hepatitis C patients which can be improved by repeated phlebotomy. Smoker's syndrome is a clinico-pathological condition where patients complain of episodes of facial flushing, warmth of the palms and soles of feet, throbbing headache, fullness in the head, dizziness, lethargy, prickling sensation, pruritus and arthralgia.
 ...
PMID:Heavy smoking and liver. 1703 78

Sludge liquor from the sludge dewatering process has a high ammonia content. In the present study, a lab-scale electrochemical (EC) system with a pair of Ti electrode plates was used for treating the sludge centrate liquor of digested wastewater sludge with a NH4(+) - N content of around 500 mg/L. The sludge liquor had a high salinity due to seawater being used for toilet flushing in Hong Kong. The results show that the EC process is highly effective for denitrification of the saline sludge liquor. Complete nitrogen removal could be achieved within 1 hr or so. The rate of EC denitrification increased with the current intensity applied. The best current efficiency for nitrogen removal was obtained for a gap distance between the electrodes at 8 mm. Electro-chlorination was considered to be the major mechanism of EC denitrification. The formation of chlorination by-products (CBPs) appeared to be minimal with the total trihalomethanes (THM) detected at a level of 300 microg/L or lower. The power consumption for EC denitrification was around 23 kWh/kg N. Additional electro-flocculation with a pair of iron needle electrodes could enhance the flocculation and subsequent sedimentation of colloidal organics in the sludge liquor, increasing the organic removal from less than 30% to more than 70%. Therefore, the EC process including both electro-denitrification and electro-flocculation can be developed as the most cost-effective method for treatment of the saline sludge liquor.
 ...
PMID:Nitrogen removal from the saline sludge liquor by electrochemical denitrification. 1716 26

It is important to study the flow behaviour through soil during electrokinetic extraction of contaminants to understand their removal mechanism. The flow through the expansive soil containing montmorillonite is monitored during laboratory electrokinetic extraction of heavy metal contaminants. The permeability of soil, which increases due to the presence of contaminants, is further enhanced during electrokinetic extraction of contaminants due to osmotic permeability. The variations in flow rates through the soil while the extracting fluid is changed to dilute acetic acid (used to control the increase of pH) and EDTA solution (used to desorb the metal ions from soil) are studied. The trends of removal of contaminants vis-a-vis the changes in the flow through the soil during different phases of electrokinetic extraction are established. Chromium ions are removed by flushing of water through the soil and increased osmotic flow is beneficial. Removal of iron ions is enhanced by induced osmotic flow and desorption of ions by electrokinetic processes.
 ...
PMID:Electroosmotic flow behaviour of metal contaminated expansive soil. 1727 1

Benzotriazole (BTA), a chemical with wide industrial applications, is a typical additive in deicer/anti-icer used at airport. To achieve a better understanding of the transport behaviour and environmental fate of BTA, laboratory column studies have been performed on subsoil samples from Oslo Airport, Gardermoen. To explore possibilities for aquifer remediation, BTA behaviour was also studied in a column of granular zerovalent iron (Fe(0)). The subsoil column study demonstrates a very limited retardation of BTA. Consecutive loadings of BTA of the subsoil column showed no change of the break-through curve (BTC) and complete desorption was observed. The sorption behaviour of BTA to metallic iron (Fe(0)) was rather complex. Considerable retardation was observed in the Fe(0) column and repeated BTA loading resulted in an earlier break-through. Between 20% and 50% of the input concentration was retained permanently in the iron (Fe(0)) column. The BTA sorption to metallic iron was found to be enhanced by chloride which lowered the break-through concentration (i.e the C/C(0) plateau). The fraction of BTA remaining in the iron column was found to vary with the flow rate, indicating a time dependant multilayer sorption mechanism. The steady increase in the amount of adsorbed BTA to the iron column during loading corresponds to a rather strong bonding of 4-15 BTA layers to the iron surface. A very slow desorption of BTA was observed; even after flushing with 753 pore volumes of BTA free water, 7.5% of the BTA remained in the column. A geochemical model was developed based on PHREEQC-2 to simulate the sorption and transport of BTA in the tested materials. The BTA sorption was modelled with Freundlich sorption isotherms, as earlier determined in batch experiments. A slight adjustment of the Freundlich parameters was required to fit the observed column break-through. However, our model was not able to simulate the long-term retainment of BTA in the granular iron columns. The simulations confirm the high mobility of BTA in groundwater aquifers and suggest that zerovalent iron could be used to retain a BTA plume, although oxidation of the sorbent might reduce the long-term performance of such a remediation scheme and slow desorption has been observed.
 ...
PMID:Column studies on transport of deicing additive benzotriazole in a sandy aquifer and a zerovalent iron barrier. 1758 39

Polycyclic aromatic hydrocarbons (PAHs) cause a high environmental impact when released into the environment. The objective of this study was to evaluate the capacity to decontaminate polluted soils with phenanthrene as a model PAH using a combination of two technologies: electrokinetic remediation and Fenton process. Kaolinite was used as a model sample that was artificially polluted at the laboratory at an initial concentration of phenanthrene of 500 mg kg(-1) of dried kaolinite. The standard electrokinetic process resulted in negligible removal of phenanthrene from the kaolinite sample. Faster and more efficient degradation of this compound can be promoted by introduction of a strong oxidant into the soil such as hydroxyl radicals. For this reason, the Fenton reactions have been induced in several experiments in which H(2)O(2) (10%) was used as flushing solution, and kaolinite polluted with iron was used. When anode and cathode chambers were filled with H(2)O(2) (10%), the kaolinite pH is maintained at an acid value around 3.5 without pH control and an overall removal and destruction efficiency of phenanthrene of 99% was obtained in 14 days by applying a voltage gradient of 3 V cm(-1). Therefore, it is evident that a combined technology of electrokinetic remediation and Fenton reaction is capable of simultaneously removing and degrading of PAHs in polluted model samples with kaolinite.
 ...
PMID:Remediation of phenanthrene from contaminated kaolinite by electroremediation-Fenton technology. 1856 1


<< Previous 1 2 3 4 5 6 7 8 Next >>