Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0016382 (flushing)
 6,387 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

A novel method is reported for quantifying protein adsorption to naked silica tubings and for assessing the efficacy of polymers added to the background electrolyte as dynamic wall modifiers. It consisted of flushing a fluorescently-labelled protein (myoglobin) into a capillary equilibrated in Tris-acetate buffer, pH 5.0, until full saturation of the potential adsorbing sites. Desorption was then affected by electrophoretically driving sodium dodecyl sulphate micelles into the capillary from the cathodic reservoir: the peak of eluted material is quantified by using a dual laser beam instrument able to read the fluorescein isothiocyanate-derivatized myoglobin at 520 nm and the internal standard (sulphorodamine) at 630 nm. Four polymers have been assessed as potential quenchers of interaction of proteins with the silica wall: hydroxypropylmethylcellulose (HPMC, Mr = 1000000), hydroxyethylcellulose (HEC, Mr = 27000), poly(vinyl alcohol) (PVA, Mr = 49000) and short-chain poly(dimethylacrylamide) [poly(DMA)] (average Mr ca. 150000). HPMC, poly(DMA) and PVA were effective in the 0.005 to 0.02% (w/v) range, whereas HEC was active in the 0.1 to 0.8% concentration range. All polymers, however, except for poly(DMA), exhibited a rather poor performance in suppressing protein interactions with the siliceous surface, and could inhibit adsorption only by, at most, 50% (contrary to oligoamines which can quench such interactions by >90%). It is hypothesized that dynamically adsorbed polymers leave ample regions of the capillary inner surface unmasked, thus allowing strong interactions of proteins with the silica wall. This is also confirmed by the modest reduction of electroendoosmotic flow upon polymer adsorption, as compared with an untreated silica surface. Although poly(DMA) can inhibit protein adsorption by as much as 85%, its hydrophobic nature could in turn provide more adsorption sites for less hydrophilic proteins than myoglobin.
 ...
PMID:Quantitative studies on the adsorption of proteins to the bare silica wall in capillary electrophoresis. II. Effects of adsorbed, neutral polymers on quenching the interaction. 1081 68

In this work, a new physically adsorbed coating for capillary electrophoresis (CE) is presented. The coating is based on a N,N-dimethylacrylamide-ethylpyrrolidine methacrylate (DMA-EPyM) copolymer synthesized in our laboratory. The capillary coating is simple and easy to obtain as only requires flushing the capillary with a polymer aqueous solution for 2 min. It is shown that by using these coated capillaries the electrostatic adsorption of a group of basic proteins onto the capillary wall is significantly reduced allowing their analysis by CE. Moreover, the DMA-EPyM coating provides reproducible separations of the basic proteins with RSD values for migration times lower than 0.75% for the same day (n = 5) and lower than 3.90% for three different days (n = 15). Interestingly, the electrical charge of the coated capillary wall can be modulated by varying the pH of the running buffer which makes possible the analysis of basic and acidic proteins in the same capillary. The usefulness of this coating is further demonstrated via the reproducible separation of whey (i.e. acidic) proteins from raw milk. The coating protocol should be compatible with both CE in microchips and CE-MS of different types of proteins.
 ...
PMID:New physically adsorbed polymer coating for reproducible separations of basic and acidic proteins by capillary electrophoresis. 1450 46

Two different families of compounds, i.e., phenolic and amino acids have been separated by capillary electrophoresis using a physically adsorbed polymer as capillary coating. The polymer used was N,N-dimethylacrylamide-ethylpyrrolidine methacrylate (DMA-EpyM) and it provided an stable coating by only flushing the capillary with a DMA-EpyM aqueous solution for 2min between runs. The usefulness of this procedure has been demonstrated through the fast analysis of different families of solutes. Two different detection systems, diode-array detector and laser-induced fluorescence, have been used to determine phenolic acids and derivatized amino acids with fluorescein isothiocyanate, respectively. The main factors affecting reversal of electroosmotic flow (EOF) such as pH, type and concentration of buffer, and concentration and influence of organic solvents, as well as all the instrumental conditions were studied and optimized for both families of compounds.
 ...
PMID:Coelectroosmotic capillary electrophoresis of phenolic acids and derivatized amino acids using N,N-dimethylacrylamide-ethylpyrrolidine methacrylate physically coated capillaries. 1907 18