Gene/Protein Disease Symptom Drug Enzyme Compound
Pivot Concepts:   Target Concepts:
Query: UMLS:C0011860 (type 2 diabetes)
 57,723 document(s) hit in 31,850,051 MEDLINE articles (0.00 seconds)

When opposing teeth with amalgam and gold restoration are in contact, current flows in the mouth at the instant the dissimilar metals touch. In this study, this condition was simulated by use of resistors and extracted human teeth with amalgam and MOD gold inlay restorations. When both teeth were in contact in a physiological saline solution, we measured current and electrical potential generated in each pulp chamber. Galvanic current generated in the tooth with amalgam was always larger (as much as 18.2 times at the instant of contact) than that in the tooth with gold. Electrical potential generated in the tooth with amalgam was always larger (as much as 9.7 times at the instant of contact) than that in the tooth with gold. It should be emphasized that the larger current generated in the tooth with amalgam was caused mainly by its larger electrical potential. These results correspond well with the clinical phenomenon of galvanic pain, which occurs in the tooth with amalgam rather than in the tooth with gold.
 ...
PMID:A measurement of galvanic current and electrical potential in extracted human teeth. 346 73

A clinically acceptable MOD cavity preparation was used instead of a jig-mounted slot preparation in this investigation. Each preparation was proportional to the tooth dimension. The design of the testing instrument ensured that forces applied to the specimens were applied to tooth structure and not to the restorative material. Prepared unrestored teeth were weaker than restored teeth. No significant difference was noted in fracture resistance between teeth restored with amalgam and with composite resin. The method used in this study is replicable, allowing the possibility of comparison studies by using identical procedures. Future research will focus on issues of polymerization method and modulus of elasticity and their effects on fracture resistance of remaining tooth structure.
 ...
PMID:Effects of composite restorations on resistance to cuspal fracture in posterior teeth. 347 55

The fracture strength of contralateral pairs of premolar teeth was determined by an in vitro method wherein impact loads of equal energy were applied to the medial aspects of the buccal cusps. Absorbed energy values quantified the fracture resistance of unprepared teeth and teeth restored with MOD amalgams, MOD amalgam overlays, MOD gold overlays, and full gold crowns. It was established that unprepared lower premolar teeth had a greater resistance to fracture than upper premolar teeth, and lower first premolar teeth were more resistant to fracture than the other premolar teeth; the fracture resistance of premolar teeth restored with MOD amalgams was significantly reduced compared with unprepared control teeth; MOD amalgam overlays in premolar teeth produced fracture resistances not significantly different from those for the unprepared controls; and restoration of premolar teeth with MOD gold overlays and full gold crowns enhanced fracture resistance to a level much greater than that of the unprepared control teeth.
 ...
PMID:Impact-fracture energy of human premolar teeth. 347 60

The purpose of this study was to determine whether composite resin bonded to enamel or to both enamel and dentin can increase the fracture resistance of teeth with Class II cavity preparations. Extracted maxillary pre-molars with MOD slot preparations were restored with composite resin bonded to enamel (P-30 and Enamel Bond) or composite resin bonded to enamel and dentin (P-30 and Scotch-bond). Teeth in a control group were prepared but left unrestored. All teeth were loaded occlusally in a universal testing machine until they fractured. Means of forces required to fracture teeth in each of the three groups were statistically compared (one-way ANOVA and Bonferroni t test). Teeth restored with combined enamel- and dentin-bonded composite resins were significantly more resistant to fracture than were similarly prepared but unrestored teeth and also than teeth restored with enamel-bonded composite resin (p less than 0.05). A significant difference was not demonstrated between the enamel-bonded group and the unrestored group. Further testing is needed to determine the durability of the bonds between tooth and restoration in the clinical setting.
 ...
PMID:Fracture resistance of teeth restored with class II bonded composite resin. 351 Nov 11

Sixty MOD inlay and 60 complete crown castings were fabricated on three epoxy die materials. The castings were evaluated with a specific criteria for fit, retention, and margin adaptation. Of the three materials tested, the castings fabricated on the Unitek die material had consistently higher ratings on the master die with the exception of unacceptable ratings in retention for the MOD inlay.
 ...
PMID:Comparison of three epoxy die materials. 351 74

The study of four elastic impression materials indicated that master castings could be more accurately seated on casts made from MOD impressions than from full crown impressions. A discrepancy between clinical acceptance and statistical identity was also demonstrated. The study indicated that by altering just one variable, the pour time, a wide range of results is obtained, some clinically acceptable and others clinically unacceptable.
 ...
PMID:Comparison study of elastic impression material. 353 68

Twenty healthy subjects were studied on the effects of training on mandibular border movements. Maximum left (LL) and right (RL) lateral excursions, maximum protrusive movement (PT), maximum mouth opening (MO), the difference between left and right excursions (R-L), midline deflection (DF) during opening and closing and midline deviation of the jaw (MOD) at maximum opening position of mandibular border tracing with or without practicing and visual feedback were compared among various sessions. No significant difference has been found on the amount of border extension under the influence of training. However, 70 to 85% of the subjects had some improvement after verbal instruction practicing, while only 50 to 65% of the same subjects showed improvement through visual feedback. It is suggested that doing research related to the jaw border movement on healthy subjects does not have to train them to obtain comparable data. On the other hand, since repeated border tracing in healthy subjects did not worsen the results, practicing or visual feedback training might ascertain a repeatable border tracing.
 ...
PMID:The effects of practice and visual feedback on mandibular border movements. 358 64

Conservative MOD amalgam-type preparations of similar dimensions were cut in extracted contralateral maxillary first premolars; one preparation for each pair had sharp internal line angles and the other had a rounded internal form. The data do not demonstrate a statistically significant difference in resistance to fracture between the two groups. The difference in preparation produced by the use of a flat-end bur vs. a rounded-end bur does not appear to produce a great enough concentration of stress to significantly weaken teeth with conservative preparations.
 ...
PMID:Fracture resistance of human teeth with mesial-occlusal-distal cavities prepared with sharp and round internal line forms. 385 28

Six test subjects using a low fluoride diet collected saliva samples each morning for 1 wk to determine the normal fluoride concentration. During the following 8 wk an acrylic plate, containing amalgam "fillings" corresponding to 6 MOD amalgams in premolars, was worn each night. Saliva samples were collected every morning and analyzed with a fluoride-ion electrode. Normal fluoride values ranged from 1.22 microM to 0.57 microM. The first days after insertion of the plates the fluoride concentration ranged from 91.06 microM to 12.26 microM in the subjects. The following 25-30 days there was an exponential decline of the fluoride concentration in saliva with a half-life of 6 to 7 days. The fluoride level was significantly higher (P less than 0.01) than basal levels in all subjects during this period. The following 20-25 days the fluoride level decreased more slowly, approaching the basal level. One subject had a significantly higher fluoride level for all 8 wk. Since the saliva fluoride concentrations registered seem to be sufficient to enhance remineralization, it is concluded that restorations with this material may have a favorable effect not only on secondary caries, but on any initial demineralization in the mouth.
 ...
PMID:Fluoride release from a fluoride-containing amalgam in vivo. 386 19

Four variations of an MOD onlay preparation were studied for retention and resistance. Boxes were more effective than an isthmus in increasing retention value. The combination of boxes and isthmus showed the highest retention. The combination of boxes and isthmus also exhibited the highest resistance. There was no difference in resistance between boxes and the isthmus.
 ...
PMID:Influence of preparation features on retention and resistance. Part I: MOD onlays. 633 49


<< Previous 1 2 3 4 5 6 7 8 9 10